Error / Failed to create file in the network

I'm using and enjoying the Oracle Data Integrator and created two packages for extraction and loading. But trying to create the file in the directory on the network get an error. I checked the permissions, but without success. Can anyone help me? Thanks.
The error message is as follows:
"cp: cannot stat `/mnt/ceaurpasd1-APCEA-output/mfp_pln.csv': No such file or directory
ls: cannot access ORDWSJ0005_M*: No such file or directory
cp: missing destination file operand after `ORDWSJ0005.txt'
Try `cp --help' for more information.
chmod: cannot access `ORDWSJ0005.txt': No such file or directory"

Hi ,
Can you provide with more information on how exactly you are trying to create a file on network driver? Did you create interfaces and call these two in the packages? or are you using OS commands? KM you are using?
regards
kk

Similar Messages

  • Error: "Failed to creat file in destination directory" ??

    When I'm trying to download the latest JDK? How do I fix this thx

    IM HAVING THE SAME DAMN PROBLEM! I NEED HELP 2!

  • Client for NFS fails to restart - Event ID: 16387 - Windows(R) failed a request to initialize the Network File System (NFS) redirector

    I have seen this issue out there in a few threads but a definitive solution has not been posted by Microsoft that I can find. So here is the simple answer. The long answer why this doesn't work on a default install of MSNFS is going to have to come from
    Microsoft and should be in the form of a hotfix.
    Problem Description
    On boot, Client for NFS starts and remains running. If an attempt is made to restart the service from the MMC or nfsadmin, an error occurs and nfsclnt fails to start.
    Event log error:
    ==================================================================
    Log Name:      Application
    Source:        NfsClnt
    Date:          7/7/2011 2:39:51 PM
    Event ID:      16387
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      myserver
    Description:
      Windows(R) failed a request to initialize the Network File System (NFS) redirector
    <[d:\w7rtm\base\fs\remotefs\nfs\client\nfsclient\service.c:199] : 0: The operation completed successfully.
    >.
      Client for NFS cannot start.
      Windows may be low on system resources.  Try increasing available system resources by closing programs, then start Client for NFS manually.
    ==================================================================
    PROBLEM CAUSED BY: When shutting down Client for NFS using the Services GUI, Client for NFS Redirector is not shut down
    SOLUTION: Stop NFS Redirector - 'sc stop NfsRdr' - Then start NFS client service - 'nfsadmin start client'
    Use 'nfsadmin client stop' to correctly shut down both the Client for NFS service and the Client for NFS Redirector.
    'Network File System (NFS) redirector' is actually "Client for NFS Redirector" and not listed as a service even though "Client for NFS" requires it.  
    Using 'sc', details on the hidden NfsRdr system component can be queried and then used to stop the redirector so that nfsclnt.exe can reload it on start up using the Services GUI.
    C:\Windows\System32>sc GetDisplayName NfsRdr
    [SC] GetServiceDisplayName SUCCESS
    Name = Client for NFS Redirector
    C:\Windows\System32>sc qdescription NfsRdr
    [SC] QueryServiceConfig2 SUCCESS
    SERVICE_NAME: NfsRdr
    DESCRIPTION:  Kernel-side part of Client for NFS. Enables a Windows based computer to access NFS server shares
    Hope this thread is helpful !!

    Thank you for your sharing and this will certainly help others have similar issues in future.TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

  • Recent backups fail: "An error occurred while copying files to the volume."

    I recently moved to a new place and set up Time Capsule as a bridge. Backups were working fine for the first couple days but then, out of the blue, I got a message that said the password I entered for Time Capsule was incorrect. I entered the correct password and hit OK. Time Machine was able to connect but now backups fail with this error: "Unable to complete backup. An error occurred while copying files to the backup volume."
    Time Machine indicates it is "preparing backup" for a few minutes, then sits at "zero of __MB completed" for a long while, finally starts backing up and gets to the end but then fails. Console indicates "unexpected reply from backup server; ignored."
    None of these attempts have fixes my problem:
    --I have deleted my TC passwords in Keychain Access.
    --I have tried downloading the latest Airport Utility and re-entering the TC disk's password in both Airport Utility and in Time Machine preferences.
    --I have restarted my computer and unplugged & plugged back in TC.
    My Internet connection works fine; TC's light is solid green. I can enter Time Machine to restore backups without a problem. The backups just fail every time now. Any ideas?

    The problem really isn't the speed of the backup; it's done in 5-10 minutes, but each time it finishes, TM reports it has failed. I don't believe plugging it in overnight or letting TM try over and over will fix the problem. I've tried to manually start backups a number of times, and have let TM try to start and complete them on its own but they consistently fail.
    It would be an awful shame if I had to delete my old backup--I bought the Time Capsule for the specific purpose of having backups that go back months and I don't want to lose what I've already backed up.

  • Upgrading to osx 10.6.8 fails. I see errors in the /var/log/install.log of "An unexpected error occurred while moving files to the final destination." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 "The operation couldn't be completed. Input/out

    upgrading to osx 10.6.8 fails. I see errors in the /var/log/install.log of "An unexpected error occurred while moving files to the final destination." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 "The operation couldn’t be completed. Input/out. Any thoughts on what is causing these errors and the upgrade failure?
    Thanks

    I have no idea what the specific error code means but input/output errors can sometimes mean a disk is failing. Make a couple of backups of all important data before doing anything else.
    Verify your startup disk using the First Aid tab in Disk Utility. If the disk needs repair boot from your Leopard DVD and repair your disk from Disk Utility under Utilities on the screen after you choose your language. Repeat the repair process until Disk Utility reports all is well.
    If Disk Utility doesn't find any errors you might want to try a new download of the update and keep a sharp eye on your HD for anything else that might indicate all is not well. Take special care to back up important data.
    If Disk Utility finds errors it would probably be a good idea to pay a visit to the Apple Store to have them check out your hard drive even if Disk Utility is able to repair the errors.

  • I've been getting this error message Lightroom cannot start because it cannot create files in the temporary file location.

    I've been getting this error message Lightroom cannot start because it cannot create files in the temporary file location “/var/folders/lK/lKbPbq2OF0aPCbMnDc erE   TI/-Tmp-”
    I've also been getting others errors about cannot create or modify temporary files when trying to install other programs.  Also some of my documents on my computer will not open and crash. 
    Any help would be helpful.
    I've tried doing this as read not sure if it helps:
    ls -Odel $TMPD
    This is what I had in response:
    drwxr-xr-x  36 root  admin  - 1224 Dec  9 00:29 /var/folders/lK/lKbPbq2OF0aPCbMnDc+erE+++TI/-Tmp-/

    Which os version are you using? 
    What is Lighthouse? 
    Please describe in detail all you have attempted to do in order to resolve the issue. 

  • Time machine: An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.

    Time machine backups are failing. I've followed the instructions I found on the Time Machine troubleshooting page (http://pondini.org/TM/Troubleshooting.html) but have gotten to where I don't know what to do next.
    Sequence of events:
    The main error message is always:
    An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.
    Yesterday, I opened Disk Utility and verified the disk. Got this error:
    Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
    I ran Disk Utility and repaired the hard drive. Then I manually started the backup before going to bed, figuring it was going to take a long time to run. When I got up this morning, the backup had failed with the same "could be temporary" error. I checked the log, which says:
    Starting manual backup
    Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Event store UUIDs don't match for volume: Macintosh HD
    Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC
    Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:17
    Error: (5) setxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:2
    Deep event scan at path:/ reason:must scan subdirs|new event db|
    Finished scan
    Found 145601 files (11.88 GB) needing backup
    16.1 GB required (including padding), 620.77 GB available
    Copied Zero KB of 11.88 GB, 0 of 145601 items
    Copied 0 files (Zero KB) from volume Macintosh HD.
    Copy stage failed with error:11
    Backup failed with error: 11
    Ejected Time Machine disk image: /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle
    Ejected Time Machine network volume.
    Starting automatic backup
    Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Event store UUIDs don't match for volume: Macintosh HD
    Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/9F8E7957-9C50-49C3-8314-880E5203E3D9
    Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/
    Does anyone know what the problem is here and what I should do?
    Thanks,
    Tery

    You have repaired your boot drive (which is good) but have you repaired your time machine drive?  I don't own a Time Capsule so I don't know if disk utility can operate on it.  If it can, you should repair it as well.  You may need to erase it and start a new backup.  That happens to time machine volumes from time to time and is why people who are serious about their data never rely on a single source of backup.

  • LV 8.2.1 reinstallation error 1301: Cannot create file

    Hi,
    I was forced to uninstall LV 8.2.1 and reinstall it. When I'm reinstalling LV 8.2.1 I get an error message
    Error 1301. Cannot create file ". A directory with the same name already exists. Cancel the install and try installing to a different location.
    (Abort, Retry, Ignore).
    This error is somehow related to the fact that after uninstalling LV 8.2.1 LabVIEW 8.2 installation directory still remains with some stuff in the user.lib and other folders. I'm always using OpenG packages and I didn't uninstall them so that may be the reason. I also used DataAct class browser with LabVIEW.
    The problem is that I cannot uninstall my OpenG packages before I can get my LabVIEW installed again as VI Package Manager reposinsible for installing OpenG packages doesn't work without installed version of LabVIEW. And I cannot get my LabVIEW correctly installed because of this error. I can press ignore and the installation procedes but I don't know whet it didn't do because of the error.
    I guess this error is a bug in LV 8.2.1 isntaller so would some of NI application engineers help, please.
    For now I press Ignore.
    Tomi Maila
    Tomi Maila

    You will get this error if the installer is trying to install a file that has the same name as a folder at that location. For example lets say the installer has a file called "sample" that should go in LabVIEW\examples folder. Now lets say there was a folder called "LabVIEW\examples\sample". Windows wont let you copy that "sample" file in the same location that contains a "sample" folder. The failure is not an error in the installer.
    The problem with the 8.2.1 installer is that it is not telling you what file this failure occurred on. It is trying to, but the string is not formatted correctly and it just says "cannot create file ." The actual file name should be where the "." is.
    You can usually tell what file it failed on from the text above the progress bar where it says what file is being copied. The best way to see what failed was to get an installation log file.
    Naren Salem
    LabVIEW R&D

  • Time Machine will not complete a system backup and terminates with "Unable to complete backup. An error occurred while copying files to the backup volume.  This follows a problem when Time machne terminated when the volume was almost full.

    On 11/1/2011, Time Machine (TM) terminated with an error message I did not record.  I noted that the drive was full and decided to do a separate complete bootable  system backup using Carbon Copy Clone (CCC), before clearing the TM volume and trying to start it over clean.  Part way through the full system backup CCC put up a message that there was a Physical Problem  "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16".  That was about the time that TM malfunctioned, so I assumed they were related.  After starting CCC over a couple of times, and getting the same error message, I let it go through to completion of the backup, which took three or four hours.  I then ran tests using Disk Utility and verified that there was nothing physically wrong with both the internal hard drive and the TM volume.  I also erased and reformatted the TM volume.  However, every time I started Time Machine, it would record a few GB and terminate with "Unable to complete backup. An error occurred while copying files to the backup volume".  I restarted the computer with no change in results.  Note that prior to starting the CCC backup, I "Repaired Permissions", "zapped the PRAM" and "re-set the SMC", hoping to have a clean bootable system on the backup.  I ran Techtool and no problems were found.
    I'm running this on an Intel iMac under 10.5.8 and recording to a 500GB My Passport drive.  My hard drive is only about half full at 246 GB.  My assessment is that something happened at 16-28-16 on 11/1/2001 to screwup the Backup Directory in the file at "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". My question is, how do I fix it?
    I had just completed writing everything above here, explaining the problems I had been encountering for the past 24 hours.  I had the Time Machine window standing open on the desktop where I could see it, having recentlycleared it after the last termination.  As I was proofing what I had written, I looked at the window and noted that the clock had started a new run for a full back up, since all prior efforts had failed and the TM volume was empty.  As I watched and waited for it to fail again, as it had been doing at about 13 GB, it kept going and going until it just finished a complete backup, about 4.5 hours later, with my having done nothing.  Now my question would have to be - what could possiibly have happened to make it perform this way?   It will be interesting to see if it continue to operate normally, or if the problem will return, in a later backup run.

    jcm21 wrote:
    CCC put up a message that there was a Physical Problem  "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16"
    You should not keep those files for long, and probably shouldn't back them up (if you need them at all -- since you do regular backups, I'm doubtful just how worthwhile that feature is).
    "Unable to complete backup. An error occurred while copying files to the backup volume".
    One of Apple's maddeningly incomplete messages. Most likely, there's a problem with a file (quite possibly the one CCC didn't like).  See #C3 in Time Machine - Troubleshooting for details and instructions on finding and fixing it.
    If you continue running the Directory Protection app, be sure to exclude your Time Machine drive from it (as it will just take up lots of room, and won't help repair your backups if there's a problem);  and exclude the folders it creates from being backed-up by Time Machine (as they'll create large backups, and you probably can't use the backed-up folders anyway), per #10 in Time Machine - Frequently Asked Questions.

  • Report error "Failed to retrieve data from the database."

    Post Author: tknorst
    CA Forum: .NET
    I have an application using CR XI R2, and on certain users computers when they try to run a report they get the following error:
    Failed to retrieve data from the database.Details: &#91;Database Vendor Code: 229&#93;Failed to retrieve data from the database.Error in File C:\DOCUME1\turkj\LOCALS1\Temp\WhseEmpJobAndActivityByUserAndDate {22DA2F53-4391-4307-9F2A-0E3C3EBE2198A}.rpt
    The report uses SQLOLEDB (ADO) and integrated authentication - it runs fine on the development machine.
    I found very little info on this error on the web (google) - so I hope someone here has an idea.

    You need to make sure that those systems can get conneted to the database that is supposed to return data. To check that create a udl in clients machine.
    Also do not change the schema of he report.

  • PeopleSoft Web Services Connector Error – Failed to create a 'RequestMessageMemberType' . . .

    Hello all,
    I am new to FIM and am currently in the process of setting-up a PeopleSoft
    Web Services MA.  I am receiving the following error in the FIM Sync Manager in the Create Management Agent dialog in the Global Parameters section:
    “Test Connection failed with the following error: Failed
    to create a ‘RequestMessageMemberType’ from the text d:Find__CompIntfc__CI_PERSONAL_DATATypeShape’. Below is the information about configured endpoint address(es): http://<FQDN>:10320/PSIGW/PeopleSoftServiceListeningConnector/HR92DEV”.
    I had no issues with the discovery process in the Web Services Configuration tool.  The following parameters were supplied for the config file:
    WSDL: 
    http://<FQDN>:10320/PSIGW/PeopleSoftServiceListeningConnector/HR92DEV/PSCONNECTORWEBSERVICE.1.wsdl
    Namespace: 
    targetNamespace
    Basic authentication <user>, <password>; Interoperable:
    PasswordText
    Has anyone else received this error message or can anyone give me some advice on how to troubleshoot?  Any help would be greatly appreciated.
    Thanks.

    Hello all,
    I am new to FIM and am currently in the process of setting-up a PeopleSoft
    Web Services MA.  I am receiving the following error in the FIM Sync Manager in the Create Management Agent dialog in the Global Parameters section:
    “Test Connection failed with the following error: Failed
    to create a ‘RequestMessageMemberType’ from the text d:Find__CompIntfc__CI_PERSONAL_DATATypeShape’. Below is the information about configured endpoint address(es): http://<FQDN>:10320/PSIGW/PeopleSoftServiceListeningConnector/HR92DEV”.
    I had no issues with the discovery process in the Web Services Configuration tool.  The following parameters were supplied for the config file:
    WSDL: 
    http://<FQDN>:10320/PSIGW/PeopleSoftServiceListeningConnector/HR92DEV/PSCONNECTORWEBSERVICE.1.wsdl
    Namespace: 
    targetNamespace
    Basic authentication <user>, <password>; Interoperable:
    PasswordText
    Has anyone else received this error message or can anyone give me some advice on how to troubleshoot?  Any help would be greatly appreciated.
    Thanks.

  • *ERROR: failed to open file " export directory path /ABAP/DATA/SAPSTR.LST

    Hello experts,
    I am doing system export.
    as per the system copy guide I follows all steps.
    when I tried for export preparation.
    I got following error in  "/tmp/sapinst_instdir/ERPEhP4/LM/COPY/DB6/EXP/CENTRAL/AS-ABAP/PREEXP/R3ldctlExport.log"
    ERROR: failed to open file "/db2/PRD/sapdata4/export_prd/ABAP/DATA/SAPSTR.LST"
    /db2/PRD/sapdata4/export_prd is my export directory.
    but I found that the "SAPSTR.LST" is not exist in the location.
    also I don't find any log regarding this error.
    how to resolve this? please guide.

    Hi Rupesh,
    In continuation of previous mail, there is keyboard problem hence spelling mistakes.
    Various possible solutions:
    Report SMIGR_CREATE_DDL has to be executed before starting export preparation.
    OR
    Download llatest kernel patch and apply them in /spmnt/<SID>/exe
    make sure download latest patch R3ldctl file and R3load from SAP Marketplace and apply them in to /sapmnt/<SID>/exe.
    Make sure export dump folder should be in local drives (in windows) or local filesystems i.e.do not  use network drives  (windows) or NFS (in case of unix).
    FInally check permission by using chmod 777 in exportdump folder in case of unix.
    Regards
    APR

  • Xcode ERROR: Failed to create an alert for ID "enabled" based on defaults: 1

    I installed OX 10.8 and xcode 4.4 and when I run any simple application for simulator it generated error in console:
    Xcode[7808]: ERROR: Failed to create an alert for ID "enabled" based on defaults: 1
    I reinstalled with clean xcode, but it did not help.  I see the building freeze when "coping 2 of 2 resources to product
    Also, xcode freezes when I jusy click on Mainstoryboard.storyboard file.
    I found a few posts with the same ERROR but no clear fix.  Any help will be appriciated.

    Hi, i had the same problem yesterday and after searching I found no solution to this error.
    Today i just burned the original Mountain Lion.dmg to a portable hard driver then reinstall the OS. And it seemed that the os had been restored and the error had been fixed.
    And, i guess there's some app that changes some documents of the system. So when you rewrite the os, u get the bug fixed.
    Good luck to you guys.

  • Jdk failed to create file in destination(please help!)

    Alright Im trying to dl jdk for my private server to compile and when i try to dl jdk it comes up with
    jdk failed to create file in destination
    This is getting frusterating please help!

    bamfs wrote:
    Alright Im trying to dl jdk for my private server to compile and when i try to dl jdk it comes up with
    jdk failed to create file in destination What version of the JDK are you trying to download and install?
    And is it the offline install?
    What reports this error, is it the browser or the JDK install program?

  • Time Machine reporting "The backup was not performed because an error occurred while copying files to the backup disk". Anyone have any idea what's gone wrong?

    After months of working OK Time Machine is reporting "The backup was not performed because an error occurred while copying files to the backup disk". Anyone have any idea what's gone wrong?

    asknrobson wrote:
    Wierd!
    I followed #C3 and loaded Time Machine Buddy, which was defnitely helpful, then deleted the file that the backup failed at, but after 3 more attempts I stopped deleting or excluding files as this wasn't improving the situation.
    The recommendation is to exclude those files from being backed-up, not to delete them!
    Updating boot support partitions for the volume as required:
    Yes, that's a bit misleading.  It just means that will be done, if it's required, which it isn't on your backups.
    I have no idea if anything actually was changed however just when I had given up and walked away, TM has started working after a week of failing.
    It probably did find and fix something.  Just for reference, Disk Utiltiy usually shows the progress and repair messages in the center part of the window, but often doesn't when repairing a sparse bundle on a network.  You can see the messages at any time by clicking the Log icon in the toolbar, or select Window > Show Log from the menubar.
    Anyway, glad it's sorted out!

Maybe you are looking for

  • Download of Oracle Dev 6.0 Prod

    Is anyone else still having problems downloading the Developer 6.0 zip file. I have tried downloading it several times. It consistently stops after 183 meg have downloaded. When the download was in 10 parts I was not able to download parts 8 and 9 an

  • Java.lang.NoClassDefFoundError: javax/mail/MessagingException

    This is causing me some headaches in the Sun 8.1 Application Server. I created an applet which uses the mail api to send error messages to the helpdesk. It works fine when used as an applet outside of the Application Server. But when I configure the

  • When i try to export my videos using quick time conversion FCE exits out on me. why does it do that?

    When i try to export my videos using quick time conversion FCE exits out on me. why does it do that?

  • CDATA bug in XMLTYPE column?

    I think I found a bug in Oracle's EXTRACT() function. I'm stuck. I don't know how to fix this. Assume the following table: CREATE TABLE mytable (mycolumn XMLTYPE); Now insert one line (first line is needed in SQL*Plus to disable &variable detection):

  • HELP! Where should I put my codecs and plug-ins!?

    I do a bit of amateur editing, and I have a bunch of codecs and plug-ins. And a few months ago, I realized I MIGHT have been putting them in the wrong folder! Macintosh HD / Library / Quicktime So... I "copied all" and I pasted into the OTHER folder