Error: "FATAL: Module oracleasm not found" in Red Hat 6

Hi all:
   OS.....: Red Hat 6.5 (64 bits)
   I am preparing to install an 12c RAC in a Red Hat 6.5. While configuring the ASMLib, i got the following error while executing "/usr/sbin/oracleasm init":
      May 2 18:23:20 oraprd01 modprobe: FATAL: Module oracleasm not found.
   I configure the Oracle YUM Repository and installed the "kmod-oracleasm" package. And in the link (Oracle ASMLib Downloads for Red Hat Enterprise Linux Server 6) i got the "oracleasmlib" and "oracleasm-support" packages, as you can see below:
      [root@oraprd01 binarios]# rpm -qa | grep -i oracleasm
      kmod-oracleasm-2.0.8-4.el6_6.x86_64
      oracleasm-support-2.1.8-1.el6.x86_64
      oracleasmlib-2.0.4-1.el6.x86_64
   My kernel is:
      Linux oraprd01 2.6.32-431.el6.x86_64 #1 SMP Sun Nov 10 22:19:54 EST 2013 x86_64 x86_64 x86_64 GNU/Linux
   My Red Hat version is:
      [root@oraprd01 binarios]# cat /etc/redhat-release
      Red Hat Enterprise Linux Server release 6.5 (Santiago)
   Why am i getting the above error while trying to init the oracleasm module? What am i doing wrong?
   Thanks in advance.

Problem solved.
I installed an older version of the kmod-oracleasm (kmod-oracleasm-2.0.6.rh1-3.el6_5.x86_64) downloaded from Red-Hat Customer Portal. Now the ASM module is loaded.

Similar Messages

[SOLVED] FATAL: module nvidia not found

Hi
I have been working on setting arch up on my laptop the past couple of days. It's a Thinkpad T61 with an NVIDIA Quadro NVS 140M gpu.
I started with the nouveau driver and all was working fine, but I decided to switch to the propriatery driver to see if it had any better power saving features.
Well, I installed 'nvidia-utils 275.09.07' with pacman > ran 'nvidia-xconf' > reboot. All I got was a few GDM failed to start error messages.
So I start digging around the xorg log and what not, tried simply running startx. Turns out the 'nvidia' module is nowhere to be found.
If I 'modprobe nvidia'
FATAL: Module nvidia not found.
So I tinker with it a bit more with no results. Reinstalled a few times, even tried installing the latest beta driver from AUR. Then I just said to hell with it and did a fresh arch install.
Now I'm on a clean install. All I have done is sync and update with pacman, create a use and install X and the nvidia driver.
Run 'startx'. Same thing as before.
Where is that nvidia module supposed to be?
In /lib/modules/2.6.39-ARCH/modules.dep there is this line. I grepped 'nvidia' from it.
kernel/drivers/video/nvidia/nvidiafb.ko.gz: kernel/drivers/video/fb_ddc.ko.gz kernel/drivers/i2c/algos/i2c-algo-bit.ko.gz kernel/drivers/video/vgastate.ko.gz kernel/drivers/i2c/i2c-core.ko.gz
And that nvidiafb file is there. Don't know if that is the right one.
Am I doing something horribly wrong here or is this a bug? I'm really not sure at this point.
Has anyone else been unlucky enough to have to deal with this issue?
Last edited by raginaot (2011-07-17 16:49:29)

raginaot wrote:
mikesd wrote:
Did you install nvidia as well as nvidia-utils?
The wiki has a great nvidia page.
ehm... I did not...
I must be getting dyslexic or something cause I don't know how many times I read that wiki page trying to find something I had missed..
Anyway, installed the nvidia package and it's all good now. Thanks.
I'm gonna go sit in the corner now.
You're a big enough man to actually admit you've erred. In my books that makes you a very respectable man so no more corner-sitting for you.

Error 'Function module "IAOM_ACCOUNT_MANAGER" not found' in RPM_FIN02.

Hi,
When I am trying to run report RPM_FIN02 in ERP system, I am getting error ''Function module "IAOM_ACCOUNT_MANAGER" not found'.
Please note i have done required configration in both systems i.e. cProject and ERP.
Can somebody help me on this?
Regards,
Manoj

Thanks for your input.
This note is already implemented in our system.
Anyway my problem is solved.The problem was in our configration.
Regards,
Manoj

[SOLVED] Fatal: module phc_intel not found

I've used the phc_intel package from AUR, yet it didn't work for me and I removed it. Now, during boot I get the "Fatal: module phc_intel not found" message. It doesn't stop the boot but it's annoying. There is no mention of it in rc.conf:
MOD_AUTOLOAD="no"
#MOD_BLACKLIST=() #deprecated
MODULES=(!usblp acpi_cpufreq cpufreq_ondemand iwl4965 ac battery button processor thermal video btusb cdrom agpgart intel-agp nvram i2c-i801 i2c-core evdev joydev pcspkr psmouse serio_raw led-class mmc_core ricoh_mmc sdhci-pci sdhci pci_hotplug shpchp thinkpad_acpi wmi rtc-cmos rtc-core rtc-lib nvidia output iTCO_vendor_support iTCO_wdt snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-codec snd-hda-intel soundcore scsi_mod ahci ata_piix e1000e bluetooth mac80211 rfkill iwlagn iwlcore cfg80211 pcmcia_core rsrc_nonstatic yenta_socket usb-storage usbcore ehci-hcd uhci-hcd ieee1394 ohci1394 sd_mod sr_mod st)
Any ideas?
Last edited by dcc24 (2009-12-19 19:59:45)

Yes, there was a conf file there. Removing it solved the problem. Thanks!

FATAL: module iwl4965 not found[SOLVED]

When booting from the CD to install Arch it detected and "installed" my intel 4965 wireless NIC just fine. However, now that I have arch installed it is giving me the error above. How can I go about grabbing the module off of the install disc and getting it running on my machine? Thanks for your time in advance.
Last edited by isolier (2008-01-10 09:58:01)

Ok here is my rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Canada/Pacific"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by udev
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to blacklist it
MODULES=(e1000 iwl4965 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="me"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
# interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth0="dhcp"
INTERFACES=(lo !eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
NET_PROFILES=(wifiProfile)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond alsa)
# End of file
Then the file "wifiProfile" residing in /etc/network-profiles is:
# Network Profile
DESCRIPTION="Home Wireless Network"
# Network Settings
INTERFACE=wlan0
HOSTNAME=me
# Interface Settings (use IFOPTS="dhcp" for DHCP)
IFOPTS="dhcp"
#GATEWAY=192.168.0.1
# DNS Settings (optional)
#DOMAIN=localdomain
#DNS1=192.168.0.1
#DNS2=
# Wireless Settings (optional)
ESSID=myWifi
#KEY=
#IWOPTS="mode managed essid $ESSID channel 6 key restricted $KEY"
#WIFI_INTERFACE=wlan0 # use this if you have a special wireless interface
# that is linked to the real $INTERFACE
#WIFI_WAIT=5 # seconds to wait for the wireless card to
# associate before bringing the interface up
USEWPA="yes" # start wpa_supplicant with the profile
WPAOPTS="" # use "" for normal operation or specify additional
# options (eg, "-D ipw")
# see /etc/wpa_supplicant.conf for configuration
AUTOWPA="yes" # automatically configure WPA
PASSKEY="secretPassword" # wpa passkey/phrase. for use with AUTOWPA
So there you have it, hope it helps.

Pls help in WEBDYNPRO Function Module 'RFC_START_PROGRAM' not found error

Dear Friends,
While i am calling one function module in webdynpro the follwing erroe is coming.
Error:-
Function Module 'RFC_START_PROGRAM' not found error
Code:-
CALL FUNCTION 'ZUPDATE' DESTINATION 'PCNCLNT300'
    EXPORTING
      im_material = item_matnr
      im_vornr    = item_vornr
      im_sheet    = item_sheet
IMPORTING
      value = ZMESSAGE .

Hi,
try declarig variable of type rfc_dest
data: lv_dest type rfc_dest.
call....
destination lv_dest
offcourse make sure your rfc destination has that name in sm59
and you have the corect authorizations to your user in the remote system
Are you btw sure that there is no screen action called inside
the function module? popup or something? because you cannot
call functions that have screen interaction like in sapgui
grtz,
Koen

Module vbox* not found; Virtualbox; additions [RESOLVED]

I'm running arch in virtualbox.
And first, I installed virtualbox-archlinux-additions from repository by pacman and everything worked fine, except a little problem.
So I thought (altough it's not recommended) installing virtualbox guest additions from virtualbox (host).
ERROR:
WARNING: Module vboxguest not found.
WARNING: Module vboxsf not found.
WARNING: Module vboxvideo not found.
I tried pacman -S {linux linux-lts and xorg-*; mesa and virtualbox-archlinux-additions}, then modprobe vboxsf vboxguest vboxvideo, still the Not Found error.
Last edited by lqs (2012-07-27 08:03:18)

It's 1 pm in China
Thanks!Your way works.
ewaller wrote:
It is getting late here, so maybe it is just me... but I cannot figure out what you are trying to do.
Is the Archlinux you are working with in a virtual machine? If so, you want to install virtualbox-archlinux-modules.

Nvidia-304xx Module nvidia not found

Hi,
I had a nvidia GTX 260 as primary gpu with the latest nvidia running.
Now I switched to an old GT 6600. Therefore I installed nvidia-304xx but modprobe nvidia fails.
[pheinrich@ARCH ~]$ sudo modprobe nvidia
modprobe: FATAL: Module nvidia not found.
[pheinrich@ARCH ~]$ pacman -Qs nvidia
local/lib32-libcl 1.1-1
OpenCL library and ICD loader from NVIDIA (32-bit)
local/lib32-libvdpau 0.7-2
Nvidia VDPAU library
local/lib32-nvidia-304xx-libgl 304.121-2
NVIDIA drivers libraries symlinks (32-bit)
local/lib32-nvidia-304xx-utils 304.121-2
NVIDIA drivers utilities (32-bit)
local/lib32-opencl-nvidia-304xx 304.121-2
OpenCL implemention for NVIDIA (32-bit)
local/libcl 1.1-3
OpenCL library and ICD loader from NVIDIA
local/libvdpau 0.7-1
Nvidia VDPAU library
local/nvidia-304xx 304.121-5
NVIDIA drivers for linux, 304xx legacy branch
local/nvidia-304xx-libgl 304.121-2
NVIDIA drivers libraries symlinks, 304xx legacy branch
local/nvidia-304xx-utils 304.121-2
NVIDIA drivers utilities and libraries, 304xx legacy branch
local/opencl-nvidia-304xx 304.121-2
OpenCL implemention for NVIDIA, 304xx legacy branch
I do not know what I have done wrong.

I found it on
https://wiki.archlinux.org/index.php/NVIDIA
For GeForce 6000/7000 series cards [NV40-NV4E, NV63-NV68], install the nvidia-304xx or nvidia-304xx-lts packages, available in the official repositories.
When I select the dropdowns on the nvidia website I get the 304.88 for that card so I think nvidia-304xx would be the right one.
I think there was something wrong during installation. If the nvidia-304xx wouldn't be compatible the nvidia module must be installed regardless.
I will try nvidia.
Edit 1
Something completly wrong here. I have installed the package nvidia now again.
[pheinrich@ARCH ~]$ sudo pacman -Qs nvidia
local/lib32-libcl 1.1-1
OpenCL library and ICD loader from NVIDIA (32-bit)
local/lib32-libvdpau 0.7-2
Nvidia VDPAU library
local/lib32-nvidia-libgl 337.25-1
NVIDIA drivers libraries symlinks (32-bit)
local/lib32-nvidia-utils 337.25-1
NVIDIA drivers utilities (32-bit)
local/lib32-opencl-nvidia 337.25-1
OpenCL implemention for NVIDIA (32-bit)
local/libcl 1.1-3
OpenCL library and ICD loader from NVIDIA
local/libvdpau 0.7-1
Nvidia VDPAU library
local/nvidia 337.25-3
NVIDIA drivers for linux
local/nvidia-libgl 337.25-2
NVIDIA drivers libraries symlinks
local/nvidia-utils 337.25-2
NVIDIA drivers utilities
local/opencl-nvidia 337.25-2
OpenCL implemention for NVIDIA
But "modprobe nvidia" prints
[pheinrich@ARCH ~]$ sudo modprobe nvidia
modprobe: FATAL: Module nvidia not found.
Maybe it has to do with the situation that I had installed "nvidia" before then removed it an installed nvidia-304xx ?
Last edited by _pheinrich_ (2014-06-29 13:45:52)

Function module RSAOU_BWBC_GET not found

hi guys i have a ODS in my BWD systems , everything works fine, loading is correct, i have moved it to my testing environment and sense then, the transfer rules are inactive when i try to active them i get this error
With Remote Function Call to system EBQCLNT900 error Function module "RSAOU_BWBC_GET" not found. occurred.
I have checked both r/3 systems, the function module doesnu2019t exist. I have checked both BW systems and the function module does exist and is active.
If this was an issue with QAS. Then DEV shouldnu2019t also load any data in BWD, and in BWD everything works fine.
I have checked the connections and its all fine.
Any suggestions?

HI,
Seems like some connectivity issue or something related to transfer rules mismatch with the data source.Its not exaclty what BW is lloking for.
Can you just do a check if the connection is happening properly between the systems.
Also can you verify the data source in the source system in quality is OK and is same as development.
can try to transport the data source again and then do a replication again and transport the transfer rules again.
Thanks
Aeet

Function module "CRM_DNO_SELECT_SERVICE_TRANS" not found

Gurus:
I try to access DSWP at SM7.0SP14. However immediately I get an error:
"Function module "CRM_DNO_SELECT_SERVICE_TRANS" not found"
BUT at se37, I can display, check and test Function module "CRM_DNO_SELECT_SERVICE_TRANS"
without any problem.
Do you know what is wrong? SMP search did not come up any clue.
Thanks!

I did the SE37 activation many times before I opened this message.
NO difference at all -- still get the same error.
Please help. Thanks!

FATAL ERROR: Product's parent not found on tree:....

Hi SDN Community
I was reinstalling integration kit on AIX 5.3.9.0 TL09 machine and I got the error message:
FATAL ERROR: Product's parent not found on tree: 7184609E-D9AA-4E8E-A4A4-819FD95D40CD, parent id: 2924AE14-CF51-4126-ABEC-845067212EBC
Before that i tried to uninstall a previous failled installation. I do all the steps mentioned on the guide except executing partnercafuninstall.sh script cause i cannot find it on my system. When i tried to reinstall the Integration Kit i get the error.
Any suggestion to solve the issue?
On Fatal Error during SAP IK XI 3.1 Installation on HPUX IA 64 Machine someone has the same problem but there is not any solution proposed.
Thanks in advance.
Alejandro
Edited by: Andres Alejandro on Jan 22, 2010 10:29 AM

I would suggest you reach out to support so that they can take a look at your system
ingo

Function module "CRM_DOWNLOAD_RCV_EXIT" not found error

Hello experts,
We are using SRM 5.0 connected to an ECC 6.0 backend system
In SRM, trans. SMQ2 I see queues with status SYSFAIL, and inside them I find that supposely the error is "Error in Mapping (Details: transaction SMW01)".
When I re-process it, I get the following dump in ST22: "Function module "CRM_DOWNLOAD_RCV_EXIT" not found". This module does not exist in SRM, and my guess is that CRM is sending stuff to SRM.
I have everything configured correctly, exactly as note # 720819.
I'll appreciate your comments on this.
Regards,
Gilberto Gallardo

Hi
CRS_DOWNLOAD_RCV_EXIT -check this fm you defined in CRMSUBTAB table in r/3
CRMSUBTAB for subscription table for Up and Download Object and add the following values:
User ObjectName U/D Obj. Class Function Obj. Type Funct. Name
CRM empty Download Material empty empty CRS_MATERIAL_EXTRACT
CRM empty Download Material empty empty CRS_CUSTOMIZING_EXTRACT
CRM empty Download Material empty empty CRS_SERVICE_EXTRACT
BR
Muthu
Edited by: Muthuraman Govindasamy on Oct 24, 2008 6:22 AM

Error starting net_rim bb_options_app: Module 'net_rim_tid_core' not found

Hello,
My bb phone curve 9320 3G shut down and kept flashing the led but couldnt start for a while, after i could start it, all my information was errased, like contacts and some apps, then when i tryied to adjust the clock time or any action at the "options" menu it would show this message in an pop up: Error starting net_rim_bb_options_app: Module 'net_rim_tid_core' not found.
So... what should i do? can anyone help me?
thanks in advance!!!
Solved!
Go to Solution.

Try these workarounds:
Method 1
Connect the BlackBerry smartphone to the computer using an USB cable.
From an Internet browser, go to http://www.BlackBerry.com/updates.
Click Check for Updates and follow the prompts to upgrade the BlackBerry Device Software.
Method 2
If it is not already installed, download and install the latest version of BlackBerry Desktop Manager, which can be found at http://www.BlackBerry.com/support/downloads.
Connect the BlackBerry smartphone to the computer using an USB cable.
In BlackBerry Desktop Manager, open the Application Loader tool.
Under the Update Software section, click Start.
Follow the prompts to complete the upgrade process.
Good luck!
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Error 404: SRVE0190E: File not found when trying to access jsp

I am using RAD (new to web dev) for some reason my app is unable to find .jsp's when they are not in the web content folder. I have a predefined package for my jsp's and when I run my servlet I get
Error 404: SRVE0190E: File not found: /WEB-INF/classes/app/view/search.jsp
now if I amend my URL in the servlet to "/search.jsp" and move the jsp to the web content folder, it works. I just don't understand why it cannot find the file when I put it in the package I created and link to it, but finds it just fine in the webcontent folder. Is there some unwritten rule JSP's MUST be in the webcontent folder? Because when i do that, then I have issues with my image links for the GUI (get red X's for all my images regardless of the fact they are linked properly.) Basically if I put my jsps where I want, look fine in design and preview, but the jsp isnt found when executed, if I move them to the web content folder the images no longer work but the jsps run. I am getting rather frustrated. Any help is appreciated.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
*https://support.mozilla.org/kb/Clear+Recent+History
Are you using cleanup software like CCleaner or other software that may corrupt the cache?
You can try to delete the entire cache folder. 
You can find the location of the cache folder on the about:cache page (open via the location bar, like a web page).
You can check the browser.cache.disk.enable pref on the about:config page to verify that the disk cache is enabled (should be true).

Function module "GM_DOCUMENT_REVERSE" not found. after Patch Update

Hi Abapers/Basis
After patch update i am not able to do FBCJ reversal entry getting below error message.
Runtime Errors         CALL_FUNCTION_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          25.05.2011 14:43:26
Short text
     Function module "GM_DOCUMENT_REVERSE" not found.
What happened?
     The function module "GM_DOCUMENT_REVERSE" is called,
     but cannot be found in the library.
     Error in the ABAP Application Program
     The current ABAP program "SAPLRWCL" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
     not caught in
    procedure "CALL_DISPATCHER_STORNO_R" "(FORM)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The program "SAPLRWCL" contains the CALL FUNCTION statement.
    The name of the function module to be called is "GM_DOCUMENT_REVERSE".
    No function module exists with the name "GM_DOCUMENT_REVERSE".
    All function modules are listed in the Function Library (SE37).
    Possible reasons:
    a) Wrong name specified. Pay particular attention to
       upper/lower case and underscores ("_").
       or
    b) Transport error
    c) In the case of an enqueue/dequeue module,
       the lock object may not have been activated
       (ABAP/4 Dictionary).
How to correct the error
    Check the last transports to the SAP System.
    Is the program "SAPLRWCL" currently being changed?
    If an enqueue/dequeue module is involved, is the activation
    of the lock object missing in the ABAP/4 Dictionary?
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "CALL_FUNCTION_NOT_FOUND" "CX_SY_DYN_CALL_ILLEGAL_FUNC"
    "SAPLRWCL" or "LRWCLF10"
    "CALL_DISPATCHER_STORNO_R"
    Function modules with names similar to "GM_DOCUMENT_REVERSE":
    GM_DOCUMENT_CLOSE
    GM_DOCUMENT_RECORD
    GM_DOCUMENT_DELETE
    GM_DOCUMENT_POST
    GM_DOCUMENT_CHECK
    G_DOCUMENT_RECORD
    GJ_DOCUMENT_RECORD
    GM_DOCUMENT_PROJECT
    GET_DOCUMENTS
    GM_DOCUMENT_DISPLAY
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
   To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
   Display the system log by calling transaction SM21.
   Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
Moderator message: please don't just dump your dumps, search for SAP notes or open a call with SAP instead.
Edited by: Thomas Zloch on May 25, 2011 2:16 PM

Hi Karthik,
Thank you for ur reply.
I did not implement any user exit/ badi. Dump is saying that my smarform function module does not exist in the se37 library.
I have excuted my form through se38, that time is working fine. When i tried through output type it is going to dump.
Regards,
Kusuma.

Error: "FATAL: Module oracleasm not found" in Red Hat 6

Similar Messages

Maybe you are looking for