Error/fault when using reader and digitial signatures combined with dropdown list
I'm working on a time card form for my company and they want me to have the form calculate the dates for the two week pay period when the ending day of the pay period is selected, that part I have down through code. The problem I am running into though is that when the user is using Adobe reader to digitally sign and send the file to their supervisor the file is changing the selection date field back to the first selection in the drop down list after the first digital signature is applied and the file saved. This error does not occur when the user is utilizing Adobe Pro though. Does anyone have any ideas? I'm wondering if it is something to do with the dropdown list settings or some kind of locking feature not working properly with the reader version. I am editing/creating the form through LiveCycle Designer ES4.
Hi,
The drop down list box, by default will have a blank value. If you can declare that as obligatory then the report will force the user to enter the value in it.
Regards,
Ravi
Note : Please mark the helpful answers
Similar Messages
-
Dreamweaver CC generates one of 3 error messages when using find and replace is used more than twice in succession. "While executing onLoad in bc_afterSave.htm, the following JavaScript error(s) occurred: At line 188 of file C:\Program Files (x86)\Adobe|Adobe DreamweaverCC|Configuration|Shared|BC\JS\bc_sites.js": out of memory"
or
While executing runCommand in File_Save.htm, a JavaScript erroroccurred.
or
While exciting getDynamicContent inAdressURL.htm, a Javascript erroroccirred.
Any thoughts - I end up closing DWCC and reopening. Will work for two additional Find and Replace before the error messaged\s popup again.bkaufman43 wrote:
Thanks Jon. I tried all of those solutions before posting. Same problem. It seems that the problem is tied to DWCC. Do not have the problem when using DW6 on Win8.1. When running DWCC on a Win7 pc, we get the same error message. When running DW6 on Win 7, f&c works fine. It seems to be a bug in DWCC. DWCC works flawlessly on our Macs.
The same steps apply to DWCC, you just need to choose the CC folders rather than the DWCS4-6 versions that the page talks about. The layout of CC's folders hasn't changed from the older versions which is why, I think, Adobe hasn't updated the troubleshooting page as of yet.
As Nancy mentions, a 38,500 page site is sort of ridiculously large for a static website, that could be part of the problem, but your response quoted above leads me to think you may have tried the troubleshooting steps in the wrong version of the program. Could you confirm that? -
Errors found when using tar and ACL's
Having difficulties with TAR and ACLs, and wondering if anyone had seen this before.
Here's the scenario: create a few directories and a few files. Tar it up and extract the files. Now assign some ACL's to them (some default for directories), tar it up, and extract the files. Permissions should remain the same. Under most circumstances they are.
Now repeat the procedure, but put a default directory ACL on the parent directory where the TAR is created. What happens is that the group permissions for anything un-tared gets trashed.
Here's a script to test it out.
Create a dummy user (I called mine foobar) -- required for setting ACL's. Run the script with the "-d" option at first. Things appear good. You can compare the permissions on the bottom for each file/directory.
Run the script with the "-s" option setting default ACL's on the parent.
#!/usr/bin/sh
ROOTDIR=/export/home/christian/config
TESTDIR=/export/home/christian
USER_X="oam"
# Run the script once with normal permissions (no ACL's) in the test directory (where tar is located)
# --> ./test.sh -d
# look at the result (ls -l) of .../sub1dir, .../sub1dir_acl, and /sub1dir_orig
# They should be relatively the same:
# --> rwxrwxrwx permissions on directories
# --> rw-rw-rw- on files
# Now run the script but set the parent directory of the script (where the TAR's are located) to have default ACL's
# --> /opt/MMSsyscnf/sub2dir/test/test.sh -s
# Now look at the result (ls -l) of .../sub1dir, .../sub1dir_acl, and /sub1dir_orig
# They are COMPLETELY skewed. Both times we tried to untar the files, ACL's wound up
# all over the place and permissions were not set correctly.
# --> rwxrwxrwx permissions ONLY on original directory (not the product of an UNTAR)
# --> rwxr--rwx permissions on directories created by untar
# --> rw-rw-rw- on files ONLY on original directory (not the product of an UNTAR)
# --> rw-r--rw- on files created by untar
# ****** Why is group affected by this, but "other" is not?! It's gotta be a bug!
# MAIN
ACTION="NOPREP"
while [ -n "$1" ]
do
if [ "ABC$1" = "ABC-d" ]; then
#flag set to try and remove default directory ACL's
setfacl -d u:$USER_X $TESTDIR
setfacl -d d:u:$USER_X $TESTDIR
setfacl -d d:u::,d:g::,d:m:,d:o: $TESTDIR
elif [ "ABC$1" = "ABC-s" ]; then
setfacl -r -m d:u::rw-,d:g::r--,d:o:---,d:m:rwx $TESTDIR
setfacl -r -m d:u:$USER_X:rw- $TESTDIR
setfacl -r -m u:$USER_X:r-x $TESTDIR
fi
shift;
done
# clean up previous run of the test
rm -r $ROOTDIR
# create files/directories
mkdir $ROOTDIR
mkdir $ROOTDIR/sub1dir
mkdir $ROOTDIR/sub1dir/sub2dir
mkdir $ROOTDIR/sub1dir/sub2dir/sub3dir
#set permissions
chmod 777 $ROOTDIR
chmod 777 $ROOTDIR/sub1dir
chmod 777 $ROOTDIR/sub1dir/sub2dir
chmod 777 $ROOTDIR/sub1dir/sub2dir/sub3dir
# create files
echo "" > $ROOTDIR/sub1dir/sub2dir/file1.txt
echo "" > $ROOTDIR/sub1dir/sub2dir/sub3dir/file2.txt
chmod 666 $ROOTDIR/sub1dir/sub2dir/file1.txt
chmod 666 $ROOTDIR/sub1dir/sub2dir/sub3dir/file2.txt
# tar/zip the files:
/usr/bin/tar -cvf $ROOTDIR/tarBeforeACLs.tar $ROOTDIR/sub1dir
/usr/bin/gzip $ROOTDIR/tarBeforeACLs.tar
# move the directory (so we keep the original as a template of what things should look like)
mv $ROOTDIR/sub1dir $ROOTDIR/sub1dir_orig
# untar/zip the files:
/usr/bin/gunzip $ROOTDIR/tarBeforeACLs.tar
/usr/bin/tar -xvf $ROOTDIR/tarBeforeACLs.tar
ls -lR $ROOTDIR
# Ok. These have been tested to be the exact same.
echo "********************************************************************************"
echo "********************************************************************************"
echo "********************************************************************************"
# Let's try using ACL's now
# --> directories (owned by root) must be acessible to OAM user.
# --> files (owned by root) must be read/writable by user OAM when created in the directories
setfacl -r -m u:$USER_X:r-x $ROOTDIR/sub1dir
setfacl -r -m u:$USER_X:r-x $ROOTDIR/sub1dir/sub2dir
setfacl -r -m u:$USER_X:r-x $ROOTDIR/sub1dir/sub2dir/sub3dir
setfacl -r -m u:$USER_X:rw- $ROOTDIR/sub1dir/sub2dir/file1.txt
setfacl -r -m u:$USER_X:rw- $ROOTDIR/sub1dir/sub2dir/sub3dir/file2.txt
setfacl -r -m d:u::rw-,d:g::r--,d:o:---,d:m:rwx $ROOTDIR/sub1dir
setfacl -r -m d:u:$USER_X:rw- $ROOTDIR/sub1dir
setfacl -r -m d:u::rw-,d:g::r--,d:o:---,d:m:rwx $ROOTDIR/sub1dir/sub2dir
setfacl -r -m d:u:$USER_X:rw- $ROOTDIR/sub1dir/sub2dir
setfacl -r -m d:u::rw-,d:g::r--,d:o:---,d:m:rwx $ROOTDIR/sub1dir/sub2dir/sub3dir
setfacl -r -m d:u:$USER_X:rw- $ROOTDIR/sub1dir/sub2dir/sub3dir
# here are things as they stand
ls -lR $ROOTDIR
echo "********************************************************************************"
echo "********************************************************************************"
echo "********************************************************************************"
# tar/zip the files:
/usr/bin/tar -cvfp $ROOTDIR/tarAfterACLs.tar $ROOTDIR/sub1dir
/usr/bin/gzip $ROOTDIR/tarAfterACLs.tar
# move the directory (so we keep the directory that was applied ACL's)
mv $ROOTDIR/sub1dir $ROOTDIR/sub1dir_acl
# untar/zip the files:
/usr/bin/gunzip $ROOTDIR/tarAfterACLs.tar
/usr/bin/tar -xvfp $ROOTDIR/tarAfterACLs.tar
# here are things after we've untared them
ls -lR $ROOTDIR
echo "********************************************************************************"
echo "********************************************************************************"
echo "********************************************************************************"
getfacl $ROOTDIR/sub1dir_orig $ROOTDIR/sub1dir_acl $ROOTDIR/sub1dir
echo "********************************************************************************"
getfacl $ROOTDIR/sub1dir_orig/sub2dir $ROOTDIR/sub1dir_acl/sub2dir $ROOTDIR/sub1dir/sub2dir
echo "********************************************************************************"
getfacl $ROOTDIR/sub1dir_orig/sub2dir/sub3dir $ROOTDIR/sub1dir_acl/sub2dir/sub3dir $ROOTDIR/sub1dir/sub2dir/sub3dir
echo "********************************************************************************"
getfacl $ROOTDIR/sub1dir_orig/sub2dir/file1.txt $ROOTDIR/sub1dir_acl/sub2dir/file1.txt $ROOTDIR/sub1dir/sub2dir/file1.txt
echo "********************************************************************************"
getfacl $ROOTDIR/sub1dir_orig/sub2dir/sub3dir/file2.txt $ROOTDIR/sub1dir_acl/sub2dir/sub3dir/file2.txt $ROOTDIR/sub1dir/sub2dir/sub3dir/file2.txt
echo "********************************************************************************"
Any ideas?UFSDUMP has some limitations, including being on a file system that is read-only. Yes, I could force it on a read-write FS, but I normally stay away from big sticker labels found in man pages when I encounter them. :-(
What I was originally after was a script that makes a backup of application configuration files before I modify them. Thus, I tar/zip the directory.
These config files/directores have ACL's attached to them to allow various roles to access them (group permissions are not fine-grain enough). However, when I ran through a couple of tests, I came across a scenario that overwrote the original permissions. Tested it on Solaris 10 and Solaris 9, and both fail.
So now (very late into the feature design) I'm VERY concerned about using ACL's on Solaris, and wonder what other side-effects there are that I'm not aware of. Can't seem to find a bug report on it, so I thought I'd ask around to see if it was just the behaviour of the TAR/ACL that I'm not quite getting, or if it really is a bug.
/chris -
Error 88708 when using digital multimeter on myDAQ, trouble with ELVIS
When I use the multimeter on the Elvis my computer recognizes the myDAQ but when I press I get an error: 88708 the specified resource is not available.
I also tried the self test in MAX and get an error. (attached)
ELVIS had trouble finding the MYDAQ saying there was no device, but I was able to fix that. I unistalled and reinstalled everything.
This was working about 2 weeks ago, I had no trouble and I had no errors, except that ELVIS couldn't recognize the MYDAQ, I changed USB ports and it worked.
Attachments:
Doc1.docx 64 KBHi Colleen92,
Can you provide additional details regarding what might have changed on your computer in the last two weeks? (i.e. operating system updates, NI software/driver updates, etc.) Also, please reference the NI myDAQ Troubleshooting linked below, which will provide a series of tests that should narrow down the issue further. Finally, I have also linked the NI Elvis and myDAQ Getting Started Guide, which further explains installation and troubleshooting steps.
NI myDAQ Troubleshooting Guide
Getting Started Guide for NI ELVIS II Series and NI myDAQ Hardware
Regards,
Mike Watts
Product Marketing - Modular Instruments -
Error 80 when using bluetooth on car radio
error 80 when using bluetooth on pioneer car radio with my iphone 4 and 5
me too...did some digging on the internet and appears Error -80 means the car deck is expecting some bluetooth protocols that your iPhones wont give out. mine was intermittent for last couple years (deck is 12 years old) as of last night i just get error -80 everytime i try to dial out or recieve a call via bluetooth. this issue was intermittent with an iPhone 3G, 4, 4S, 5 and now my current 5S. im blaming Pioneer not Apple for this
I ended up buying a new deck for my car...gets installed tomorrow. -
Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W. -
How do I overcome error "files in use Reader" when downloading 10.1.4?
How do I overcome an error "files in use Reader *" when attempting to download Reader 10.1.4? Reader 8 not in use, but is installed. All I want to do is upgrade to 10.1.4. Why do I get sudn an error anyway?
Make sure no AcroRd32.exe process is running when you run the installer. Easiest way:
download the cleaner tool http://labs.adobe.com/downloads/acrobatcleaner.html and save it to disk
download the installer from http://get.adobe.com/reader/enterprise/ and save it to disk
restart Windows, then run the cleaner tool, followed by the installer, before doing anything else
P.S. the latest Reader X version is 10.1.8. -
Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.
All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747 -
Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.
AMDS for Windows
http://support.apple.com/kb/TS1567 -
When using reader, the font gets very large on last page and I cant change it
when using reader, the font gets very large on last page and I cant change it
You cannot edit PDF files with Reader. You can change the View options to make what you see smaller. View -> Zoom
-
Im trying to restore my iphone 3G, i used itunes to restore it so it downloaded the iOS, after that it gives me the error 1015, when i read about the error then it tells me that i was downgrading, but how come since i used itunes to restore? why didnt it automatically provide me with the latest software made perfectly for the iPhone?
Your phone was jailbroken. You can't get help here.
In VERY RARE circumstances, this may indicate a hardware failure. -
Adobe Air error message when using PSE 10
When I try using the tips in PSE 10 I get an error message from Adobe Air stating that it is damaged. Have tried uninstalling and re-installing, but that hasn't helped. I have windows 7
Okay Jeff, this is as far as I have gotten so far. I'm using Air version 3.2.0.2070. This is the install log.
Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -silent -eulaAccepted -programMenu AdobeHelp.air
Installed runtime (2.6.0.19120) located at C:\Program Files (x86)\Common Files\Adobe AIR
Invoking Application Installer for combined install
Launching subprocess with commandline C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
Application Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -runtime C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
Installed runtime (2.6.0.19120) located at C:\Program Files (x86)\Common Files\Adobe AIR
Unpackaging file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air to C:\Users\Vette\AppData\Local\Temp\flaE4EA.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla71A.tmp
Native installation package creation succeeded
Starting silent combined runtime update and app install.
Updating runtime from version 2.6.0.19120 to version 2.6.0.19140.
Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 to C:\Program Files (x86)\Adobe using the source file at file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
Reinstalling C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp\setup.msi
Installing msi at C:\Users\Vette\AppData\Local\Temp\fla71A.tmp\setup.msi with guid {BD7F1DA3-5EA0-65F8-52B0-5E103FDC045A}
Application Installer end with exit code 0
Subprocess app installer succeeded
Runtime Installer end with exit code 0
Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -silent "E:\Adobe Photoshop Elements 10\AdobePhotoshopDotcomInspirationBrowser.air"
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Invoking Application Installer for combined install
Launching subprocess with commandline C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp -silent -withRuntime -url file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
Application Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -runtime C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp -silent -withRuntime -url file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Unpackaging file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air to C:\Users\Vette\AppData\Local\Temp\fla634C.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'PhotoshopdotcomInspirationBrowser' and pubID '4C35C4D325D350FE0114230CBADCA2DDD0AC8D25.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla7325.tmp
Native installation package creation succeeded
Starting silent app installation to C:\Program Files (x86)\Adobe. Installing app PhotoshopdotcomInspirationBrowser.4C35C4D325D350FE0114230CBADCA2DDD0AC8D25.1 version 3.07 using the source file at file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
Installing msi at C:\Users\Vette\AppData\Local\Temp\fla7325.tmp\setup.msi with guid {4C184855-B85A-6873-C642-60A58682E721}
Application Installer end with exit code 0
Subprocess app installer succeeded
Runtime Installer end with exit code 0
Launching subprocess with commandline C:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -updatecheck
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.6.0.19140/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.6.0.19140/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Unpackaging complete
Download success
Runtime updated downloaded
User has selected immediate install of the update
Starting runtime background update installation
Launching subprocess with commandline C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background\updater -update
Runtime updater successfully launched
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -update
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\airafa3.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_704_0 -ei
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Starting silent runtime update. Updating runtime from version 2.6.0.19140 to version 3.1.0.4880
Installing msi at c:\users\vette\appdata\local\temp\airafa3.tmp\setup.msi with guid {FE23D063-934D-4829-A0D8-00634CE79B4A}
Runtime Installer end with exit code 0
Elevated install completed
Runtime Installer end with exit code 0
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -updatecheck
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Clearing unused background update directory
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.1.0.4880/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.1.0.4880/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -arp:uninstall
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Runtime Installer end with exit code 6
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is:
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\aire7af.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_4784_0 -ei
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Starting silent runtime update. Updating runtime from version 3.1.0.4880 to version 3.2.0.2070
Installing msi at c:\users\vette\appdata\local\temp\aire7af.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -installupdatecheck
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -arp:uninstall
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Relaunching with elevation
Launching subprocess with commandline c:\program files (x86)\common files\adobe air\versions\1.0\resources\adobe air updater.exe -eu
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_3840_0 -eu
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Starting runtime uninstall. Uninstalling runtime version 3.2.0.2070
Uninstalling product with GUID {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is:
No installed runtime detected
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\airbda4.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_764_0 -ei
No installed runtime detected
Starting silent runtime install. Installing runtime version 3.2.0.2070
Installing msi at c:\users\vette\appdata\local\temp\airbda4.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -installupdatecheck
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is:
No installed runtime detected
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\air2fa8.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_5396_0 -ei
No installed runtime detected
Starting silent runtime install. Installing runtime version 3.2.0.2070
Installing msi at c:\users\vette\appdata\local\temp\air2fa8.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -installupdatecheck
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Application Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -playerVersion=11,2,202,233 -sandboxType=remote -securityDomain=airdownload.adobe.com -https=false -fromUserEvent=true -- -url http://www.adobe.com/support/chc/air/350/AdobeHelp.air -- WWW aHR0cDovL3d3dy5hZG9iZS5jb20vc3VwcG9ydC9jaGMv
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Begin air file download from http://www.adobe.com/support/chc/air/350/AdobeHelp.air
Download destination is C:\Users\Vette\AppData\Local\Temp\fla7A97.tmp
Received download status 200
Response URL is http://www.adobe.com/support/chc/air/350/AdobeHelp.air
Download success
Unpackaging file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp to C:\Users\Vette\AppData\Local\Temp\flaB22B.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\flaC7B.tmp
Native installation package creation succeeded
Starting app installation to C:\Program Files (x86)\Adobe. Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 using the source file at file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: Directory can't be written to" errorID=5006]
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location "C:\Program Files (x86)\Adobe" -desktopShortcut -programMenu file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Relaunching with elevation
Application Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_4952_0 -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location "C:\Program Files (x86)\Adobe" -desktopShortcut -programMenu file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Unpackaging file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp to C:\Users\Vette\AppData\Local\Temp\fla3260.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla3BF3.tmp
Native installation package creation succeeded
Starting silent app installation to C:\Program Files (x86)\Adobe. Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 using the source file at file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Installing msi at C:\Users\Vette\AppData\Local\Temp\fla3BF3.tmp\setup.msi with guid {BD7F1DA3-5EA0-65F8-52B0-5E103FDC045A}
Application Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline C:\Program Files (x86)\Adobe\Adobe Help\Adobe Help.exe
Application Installer end with exit code 0
Date: Thu, 12 Apr 2012 17:10:46 -0600
From: [email protected]
To: [email protected]
Subject: Adobe Air error message when using PSE 10
Re: Adobe Air error message when using PSE 10
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Vetteski65 I would recommend reviewing Troubleshoot AIR installation | Windows - http://helpx.adobe.com/air/kb/troubleshoot-air-installation-windows.ht ml for steps on how to resolve your difficulties. Please feel free to respond to this thread if you have any questions about the steps listed within the document. If you could also respond with the specific error message you receive it would be appreciated.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4331328#4331328
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4331328#4331328. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Licence error message when using automation software
Error message when using Rational Functional Tester 7.0.1.1
to record a Flex application. The message seemed to come from the
Flex application.
I can record a fiew step in the application, then I have the
message : "Licence are not present. Eith the trial version only
limited record are allowed". But, my license of my Rational
Functional Tester application is activated.
I am using a Flex builder 3 trial version and the trial is
not over.
Is there any problem to get the license in the File compiler
with "D:\apps\IBM\SDP70\FunctionalTester\bin\rft.swc"? That RFT
file is supposed to be included in the flex application once
compileDoes anyone know how to build with automation support in a
linux environment?
We simply run an ant script build and have the SDK installed.
We purchased Flex Builder Professional, but cannot install on Linux
(we don't want to use the alpha version).
Thanks for any pointers :) -
Did you get error 1067 when updating Reader?
If you got update error 1067 when updating Reader, I'd like to hear more so we can find a solution.
What OS are you using and what version (such as Window XP SP2)?
What version of Reader do you have?
What was the error message you got?
How much disk space do you have available?
How much memory (RAM) is on your system?
I recommend you try installing again using the direct download link noted in this document under "Try a different download link":
http://kb2.adobe.com/cps/836/cpsid_83641.html#main_Try_a_different_download_link
Please let me know if this helps. We haven't been able to reproduce this error.
Thanks so much!I just worked through this error on my Dad's computer. He has XP Home SP 3, Adobe Acrobat 4 and Reader 9.4.7 were already installed. He has been getting to 1067 error for some time and just clicking through it. I manually un-installed Acrobat 4, but left the shared files in web/common alone. I did not touch Reader 9.4.7. I downloaded the alternate installer for Adobe 10.1.2 for English and ran it. It did complain, eventually, about 9.4.7 still having a file in use, but I'd left the previous dialog from the 9.4.7 updater failure open. I closed that 9.4.7 failure dialog and hit 'retry', and the installer proceeded onward and seems to have completed successfully.
This machine has 1 gig of RAM and approx 4G of free disk space on C:. -
I'm getting a error message when using Apple Configurator "unable to send ClearPasscode command to device"
Yes, that is correct. My spreadsheet has the following information in those cells if you want to compare yours on Monday:
Product Type
Application
|
AdamId:
<and a 9 digit number>
I ended up bringing the Macbook Pro home with me after struggling with it for a half hour at the end of a long day. I called and within 5 minutes the problem was corrected. The technician said they were getting calls all day.
Maybe you are looking for
-
How to get system Hostname in java
Hi, I am a java developer trying to get the hostname of the system from java class. Meaning want the value when i run the $hostname command in linux and my server is Linux server. I am searching in the System Properties for the hostname but i could n
-
Combining Text in Automator for Excel import.
I'm attempting to create an automator workflow that will string some text together so that it can be imported into an Excel worksheet. Here's my workflow so far. • New Text File Creates file temp.txt • Run AppleScript Opens file temp.txt • Get Specif
-
I still have been unsuccessful in trying to troubleshoot this cap lock problem. I have tried resetting and restoring the phone with no luck. My cap lock feature has ceased to work. Does anyone have any suggestions? I called the support line and the t
-
2nd Gen iTouch Date/Time Randomly reseting?
Using 2.2 firmware with 32GB iTouch the system date and time get set to some random new date time from past. 1) So far the random date-time has always been in the past. 2) Somehow related to iTouch being connected to PC. 3) Might be related to Sync [
-
How to upload the ringtone (transfer) from my normal computer to Iphone4. plz help me