ERROR: file can not be accessed or does not exist
I have a client online at this very moment that just went on and did all their page edits... about 2 hours of work for him.
He went to save the file & received the error "...file can not be accessed or does not exist, Error" (no error number or anything. Here are the steps he took:
Edit page
Save ... received error
Done... received same error
Call me in panic
Anyone???
Hello Tommy,
The editing session should not time out for 24 hours for a normal login. The period is even longer if “remember me” was checked at login... And if the session timed out, you should have been prompted with the login dialog, not thrown an error.
I've sent you a private message regarding further troubleshooting.
Best regards,
Corey
Similar Messages
-
Only on one page, the client is receiving this error:
Error - The operation could not be performed because the
file cant be accessed or doesnt exist. Please contact your web
developer to correct the problem.
I tested it with a couple different usernames and a couple different browsers and it works fine on my end.. but none the less it is happening to him. This is the second time it happened to two different clients.
??? Any ideas ??? Anyone else had this happen?Here's the setup on the two machines in particular...
Machine #1:
XP Pro
Was IE7, now latest FF
No antivirus
Firewall – Windows Firewall, Downloaded AVG free trial ver., but not installed
Machine #2:
XP Pro
IE7
Again, No AV… had Kaspersky… but uninstalled it
Windows Firewall
Maybe that could be of some assistance... not seeing anything that could possibly block or inhibit the ICE. Each machine is independent of the other, separate networks, different locations, JavaScript enabled, no cookie blockers, etc.
....STUMPED!!! -
Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files.
Hi,
Please re-create the Outlook profile to have a try. If the issue persists, we can do the further checks in Exchange server.
Please make sure you have changed the OAB generation server to Exchange 2010 and enable Web distribution on the Exchange 2010 Client Access server:
Move-OfflineAddressBook "Default Offline Address List" -Server <MBX2010>
If all configurations are correct, please check whether there is any folder in the following path in Exchange sever 2010:
a. OAB generation in Mailbox:
\\Program Files\Microsoft\Exchange Server\V14\ExchangeOAB
b. OAB distribution in Client Access:
\\Program Files\Microsoft\Exchange Server\V14\ClientAccess\OAB
Thanks,
Winnie Liang
TechNet Community Support -
Hi,
I have one client and one server. In both hosts I created an OS-user named User1.
The user have been given various role under the prefix SQLServer2005.
The default instance of SQL Server and instance (background-process) of
Analysis Service are also run under User1.
I connected via Management Studio to Analysis Service directly in the
server. I set the permission to access Analysis Service to Everyone.
This means everyone should be able to use Analysis Service. I have set
ODBC data source to the server. Testing was successful.
I created a project to create a cube. The tables are fairly small (total 300 MB, biggest one 290).
On project setting (created at client) I set the server host as
deployment target. I managed to deploy project when all I have are Data
Source and Data Source Views.
But on deployment I always failed. The errors remain the same, begins with
OLE DB error: OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.; 08001.
I have tried 4 combinations of Impersonation :
(A) Use a specific username and password
* in which I supply User1 and the password of User1
(B) Use the service account
(C) Use the credentials of the current user
(D) Default
Why is this? The server does certainly exist. I think the error message is wrong.
I have seen 3 posting that seems related. One of them say the solution is giving the right impersonation, but gave no detail. About the privilege, User1 are granted the role of
SQLServer2005MSOLAP. What is the solution?
Thank you,
BernaridhoI just had this problem and solved it by creating an alias in SQL Server Configuration Manager, as below:
Scenario: My SQL server is accessible from the internet under my.domain.com, and from itself at ServerName. But the local network can't see itself through the router at my.domain.com, so the deployed project is unable to process the cube, since that would
require Analysis Services to be able to see the SQL Server at my.domain.com, which it can't do.
So I changed the server in my project from my.domain.com to ServerName, and I created a local alias to ServerName in SQL Server Configuration Manager, under SQL Native Client 11.0 Configuration, Aliases. In my case, I pointed it to localhost port 1333, and
used SSH -L 1333:my.domain.com:1433, but I could have pointed the alias directly to the server, just as well. (Verifying... yes, that worked too, so you can forget SSH if you have no interest in it.) -
Can anyone tell me what this Time Machine error means? The network backup disk does not support the required AFP features?
AFP - Apple Filing Protocol
The Network Attached Storage (NAS) that you are pointing Time Machine at does not have the features needed by Time Machine in order to do its Thing. Time Machine needs some specific features that are not typically available on generic networked storage devices.
There are manufactures that support the Mac OS X HFS+ file system formats and implement all the needed AFP protocol packets necessary so that they can be used with Time Machine, but apparently yours does not.
If you are not using a networked mounted volume for Time Machine, then more information will be needed about your Time Machine setup. -
My Adobe Reader XI 11.0.09 fails to open pdf's. Error message - "because the associated helper application does not exist." Can anyone help me?
Okay. I will try this again. I did remove and reinstall earlier, but will
do it now.
regards, Mike
On Wed, Oct 15, 2014 at 12:55 PM, Sabian Zildjian <[email protected]> -
I am trying to save a large file on Illustrator CS6 and it does not save and instead says "Unknown Error Occurred." What do I do?
The file has 4 artboards with webpage designs. I tried to take two of the artboards, create a separate doc with those two, and save, but the result was the same.
However, I am able to save simpler, smaller files.
I need to not lose these files and I am afraid to quit and restart and lose my unfinished work.
Any advice?What happens if you choose this option?
-
How can I get GV and HDV files imported to Premier Elements 13. I know now that they are not supported. But does it exist ways to get them. I use camera HDR-HS7E?
skjeggi
What is this HDR-HS7E - a miniDV camcorder that lets you do DV and HDV capture firewire?
True, the DV and HDV capture firewire into the Premiere Elements 13 Capture window is gone. But, have you
looked at the workaround suggested by PRE_help in this forum. The workaround is found in the following
Adobe document....
http://helpx.adobe.com/premiere-elements/kb/removed-features-formats-elements.html
When your schedule permits, please let us know if that worked for you.
Thank you.
ATR -
I have been using Adobe Photoshop Elements on an older Mac...just bought Mac Mini and migrated all my files...but 4.0 Does not work....can I upgrade PSE 4.0 to PSE 13?
Yes, any version of PSE qualifies for upgrade pricing, but if you're in the US you might want to consider running the trial for now and waiting for the black friday specials, when the full version will be a lot less than the adobe upgrade price.
-
Back up to time machine failed. Error, "Files can’t be copied onto the backup disk because it appears to be read-only". Back up has been working. drive is not read only. How do I fix this?
Hello,
http://pondini.org/TM/C6.html -
Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0
Cannot access in browser PDF files unless blank box is closed and then website address is clicked on again in browser address bar and page reloaded.
Uninstalled Acrobat 9, reinstalled, still same problem.
Help please!Yes I can it only happens in the browser..
I reinstalled Windows on my machine and started over a couple of weeks ago.
When my desktop started up I didn’t have Acrobat installed and clicked on a pdf file and the open with xxx dialogue box came open.
I chose a different program as Acrobat wasn’t installed yet so it associated pdf files with another program.
Later Installed Acrobat and couldn’t associate the pdf file with acrobat so I went into Folder Options and manually associated PDF files with Acrobat.
Ever since then I get the error when something is downloaded and opened in the browser.
Works fine everywhere else and when I cancel the blank error, highlight the web address and press enter to reload it works 90% of the time.
Not sure what to do.. -
ERROR: Cannot start mail services, configuration directory does not exist
I'm running an Xserve G5 with one internal boot drive and one RAID using the other two internal drives. I used Apple's Disk Utility to set-up the RAID.
Back in early December, I moved my mail database and mail store to the RAID. Ever since, when I restart the server, the mailaccess.log generates the following error:
Jan 23 18:51:33 mail master[47]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/RAID/mail.data/db
I'm speculating this is a timing error that gets created when Postfix initially can't find the RAID. Then, it must try again and find it because the error message does not repeat and mail starts running.
Is this something to worry about?Hi Joel,
You're right, it's a timing issues. The mail system is ready for work before the file system is mounted. It's benign.
Jeff -
Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.
The statement above is in the pop up error box every time, when I launch Firefox. If I click ok in the box Firefox then opens. How do I fix this initializing/launch problem?Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")<br /> -
Error: ORA-16532: Data Guard broker configuration does not exist
Hi there folks. Hope everyone is having a nice weekend.
Anyways, we have a 10.2.0.4 rac primary and a 10.2.0.4 standby physical standby. We recently did a switchover and the dgbroker files automatically got created in the Oracle_home/dbs location of the primary. Now need to move these files to the common ASM DG. For this, I followd the steps from this doc:
How To Move Dataguard Broker Configuration File On ASM Filesystem (Doc ID 839794.1)
The only exception to this case is that I have to do this on a Primary and not a standby so I am disabling and enabling the Primary(and not standby as mentioned in below steps)
To rename the broker configuration files in STANDBY to FRA/MYSTD/broker1.dat and FRA/MYSTD/broker2.dat, Follow the below steps
1. Disable the standby database from within the broker configuration
DGMGRL> disable database MYSTD;
2. Stop the broker on the standby
SQL> alter system set dg_broker_start = FALSE;
3. Set the dg_broker_config_file1 & 2 parameters on the standby to the appropriate location required.
SQL> alter system set dg_broker_config_file1 = '+FRA/MYSTD/broker1.dat';
SQL> alter system set dg_broker_config_file2 = '+FRA/MYSTD/broker2.dat'
4. Restart the broker on the standby
SQL> alter system set dg_broker_start = TRUE
5. From the primary, enable the standby
DGMGRL> enable database MYSTD;
6. Broker configuration files will be created in the new ASM location.
I did so but when I try to enable the Primary back I get this:
Error: ORA-16532: Data Guard broker configuration does not exist
Configuration details cannot be determined by DGMGRL
Form this link,(Errors setting up DataGuard Broker it would seem that I would need to recreate the configuration....Is that correct ? If yes then how come Metalink is missing this info of recreating the configuration... OR is it that that scenario wouldnt be applicable in my case ?
Thanks for your help.Yes I can confirm from the gv$spparameter view that the changes are effective for all 3 instances. From the alert log the alter system didnt throw u pany errros. I didnt restart the instances though since I dont have the approvals yet. But I dont think thats required.
-
Whenever access to the Internet is needed, clicking on any icon or link (including the Firefox icon) results in a delay of around 20 secs., followed by the appearance of the error message, headed "Malformed File". The message reads 'Firefox couldn't install this item because "install rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.'
Clicking OK or closing the box leads to a further delay of about 20 secs. after which the required action takes place! Of course, it could be said that it's really only a delay, so I should just get used to it, but it's still a malfunction, it's a pain in the neck or another region, and I really would like to cure it. Any suggestions - please????https://support.mozilla.com/en-US/questions/756907
Maybe you are looking for
-
Hi, I am trying to implement SRM 4.0 business package on EP6SP9. I am using Portal SLD for maintaining jco connections with SRM system. In the iview External JCo connection configuration under Supplier Portal Administration -> System Integration, wh
-
Not Writing Captions to IPTC???
When sorting my images, I need to add; caption, keywords, copyright notice, copyright URL, source, and author. Until now I have always done this using two pages in the File Info Panel; Description and IPTC status. Since upgrading to CS3, all of the l
-
Hi, We are running SAP PI 7.11. Input message: <?xml version="1.0" standalone="yes"?> <SITE_ERROR xmlns="http://test.com/SITE_Error"> <ERROR_DATA> <ERROR_DATE>20110120</ERROR_DATE> <ERROR_TIME>060002</ERROR_TIME> </ERROR_DATA> <SITE_INF
-
A procedure with a buffer too small problem
hey! while running a procedure for loading data from csv file into a db table (on 9i db), i got the error "ORA-06502: PL/SQL: numeric or value error: character string buffer too small". It's make scense since i have a large csv file (2 columns ,about
-
How do I fix error 11111 when submitting my podcast?
I keep trying to submit my podcast to itunes from my site and it keeps denying me. how do i get past error 11111 and get my podcast up. BTW my feed is tdcampradio.com/shows