Error: File Not Found on File Repository Server

Post Author: Ashish.Phanse
CA Forum: Exporting
Hi
We have clustered 2 servers and all the services of both the servers have CMS Name as "@<Cluster_Name>"
But when we run any crystal report through the thin client(portal) or through crystal itself, it is showing the errror ---
"xxxxxxxx.rpt not found on File Repository Server". If I check the path for report in CMC and if I check physical location, the file is present.
This is happening only with Crystal reports and not with DESKI or WEBI reports.
Please help...
Thanks
Ashish

Post Author: eng_y_y
CA Forum: Exporting
Hi Ashish,
Did you uninstall the Business Objectes and reinstall it again?

Similar Messages

File repository server error: failed to put the file to file server

Hi,
Am trying to export relational and OLAP universe to repository and getting an error.
Am using Universe Design Tool and product version is BI 4.0 SP 5
When I create a universe and export it for the first time it get exported successfully.
However I tried to export same universe after making few changes, getting below error
File Repository Server error: Failed to put the file to fileserver: frs://<FRS Location>/Universe_Name.unv already exists
Is anybody faced such issue?
I suspect it is a configuration issue/product bug.
Your thoughts are highly appreciated.
Regards,
Vinesh

Hello Vinesh,
There is a workaround mentioned in the following KBA:
1309859 - Error: WIS 00501 Universe not found when viewing Documents
Please have a look.
Thanks and regards,
Madhumitha

Error : 404 not found while opening Ciscoview from Campus manager with LMS 3.2

Hi Friends,
While opening ciscoview from Campus Manager Topology, getting error 404 not found by apache web server. pls guide me to resolve this issue if anyone faces the same situation earlier.
Thnx

The name of Enterprise Manger service is em you can find it under deployments in weblogic console. Its status should be active and ok.
Have you tried this
http://technasir.blogspot.com/2013/04/enterprise-manger-is-not-working.html
regards
Nasir

Report not found in File Repository Server

I am looking for some guidance as to what to try next with this issue.
We had ran into some issues with the central management service and had to reinstall crystal. During the setup we are connecting to our mysql database and the reports and folder structure is restored in the Central Management Console but when the reports are previewed or scheduled to run they fail I receive the following message:
"File generated name.rpt not found on File Repository Server.
Unable to retrieve Object.
File generated name.rpt not found on File Repository Server."
Has anyone came across this issue and if they could provide a solution would be greatly appreciated.
Thanks.

there are very many forum posts and SAp knowledge articles on this topic/error message. Please do use search before posting.
The repository that stores all your objects in Crystal is dual one part is int he DB - called CMS DB - it stores all te metadata, and second part is FRS (Input /Output servers) - they store actual physical reports and instances on the disc.
My guess is that during re-install you either wiped out original FRS location or after re-install didn't point your FRS to the right place.
If its second - all you need to do is point FRS to the right directory and you'll get your reports back.
If it's first - you just lost all your reports/universes etc.... and will need to restore from backup.

Input File repository server Error: The requested directory does not exist.

Hi,
Getting following error "The requested directory does not exist." for Input and Out put file repository server.
The specfied directory exists and the user has local administrative privelges with full control of the IFRS and OFRS location.
The location was earlier working and after trying to implement Windows AD the things stopped. Have tried reverting the things but the following issue still persists.
Thanks,
Manpreet

@Siva,
I am not using the defacult FRS, I have specfied a specfic location on which the user has full control.
this was working prior to the Windows AD setup tried by me.

"File Repository Server error" when trying to commit a new CrystalEnterprise.Program instance to the InfoStore

I've run into an issue where saving a new CrystalEnterprise.Program instance is throwing an ambiguous exception with no other information than a generic HRESULT code and the even less useful error message "File Repository Server error". I've debugged the code using the COMException managed debugging assistant and Reflector to get to the callsite of the COM object, but there is nothing there to indicate what the actual File Repository error is attributed to. Logging for the InputFileRepository service in the CMS was been set to HIGH, but nothing shows there as a result of my code executing.
The call to myInfoStore.Commit(...) is where the COMException is thrown.
    protected void CreateProgramObject(InfoStore infoStore)
        using(PluginManager pluginManager = infoStore.PluginManager)
            using(InfoObjects newCollection = infoStore.NewInfoObjectCollection())
                using(PluginInfo programPlugin = pluginManager.GetPluginInfo("CrystalEnterprise.Program"))
                    using(Program tempProg = (Program)newCollection.Add(programPlugin))
                        const string USER_FOLDER_QUERY =
                            "Select SI_ID From CI_INFOOBJECTS Where SI_NAME = '[email protected]'";
                        using(InfoObjects folders = infoStore.Query(USER_FOLDER_QUERY))
                            if(folders.Count < 1)
                                Response.Write("No user folder was found!");
                                return;
                            using(InfoObject userReportFolder = folders[1])
                                tempProg.Title = "Scheduled File";
                                tempProg.Description = "My new program";
                                tempProg.ParentID = userReportFolder.ID;
                                tempProg.ProgramType = CeProgramType.ceScript;
                                tempProg.Files.Add(@"E:\sample.bat");
                                try
                                    infoStore.Commit(newCollection);
                                catch(SystemException snx)
                                   Trace.Write(snx.ToString());
Has anyone run into this issue and found a resolution?

Thank you for the reply. I changed the file path on the BOE Server to match the path I'm using in the Files.Add(...) call. At least now I get a different error message, but it's still not enough to resolve the issue. The message is "File Repository Server error : File system operation for D:\Scripts\test.bat on File Repository Server failed. If the problem persists, please contact your system administrator for event log information." I verified the service account the SIA service runs under can access that path, but still no luck.
Using a UNC path resulted in the original "File Repository Server error" message in the Exception.

Input File Repository Server not running

When I try to access reports I get the following error
Server Error in '/v2' Application.
File Repository Server Input is down.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: File Repository Server Input is down.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x80004005): File Repository Server Input is down.]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +77
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +218
[Exception: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +272
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +875
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +52
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(InfoObject infoObject, EnterpriseSession enterpriseSession) +87
   ProjectVillage.ReportView.ViewReport()
   ProjectVillage.ReportView.Page_Load(Object sender, EventArgs e)
   System.Web.UI.Control.OnLoad(EventArgs e) +67
   System.Web.UI.Control.LoadRecursive() +35
   System.Web.UI.Page.ProcessRequestMain() +750
I have gone to the Central Configuration Manger and it all of the servers running except for input file repository server and output file repository server. When I start those two servers it goes right back to stopped. Now I checked the event viewer for errors and these to errors show up.
Event Type:     Error
Event Source:     BusinessObjects_inputfileserver
Event Category:     Startup
Event ID:     35602
Date:          4/8/2011
Time:          10:04:59 AM
User:          N/A
Computer:     PVWEB3
Description:
Fail to register with the nameserver. Please check for name duplication and validness of name used: Input.PVWEB3
and
Event Type:     Error
Event Source:     BusinessObjects_inputfileserver
Event Category:     Services
Event ID:     34200
Date:          4/8/2011
Time:          10:04:59 AM
User:          N/A
Computer:     PVWEB3
Description:
Failed to register with the name server. Reason: The server name being registered is invalid. There might be another server registered using the same name. Choose another name or delete the corresponding server entry in the CMC.
Now to give a bit of a back story as to what happened before this. We were having a issue logging into the domain on this machine. The only way to get passed this was to unjoin and rejoin it to the domain then this happened. When I try to go to the CMC using the admin launch page I get the following error.
Server Error in '/businessobjects/Enterprise115/WebTools' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested Url: /businessobjects/enterprise115/WebTools/relativeredirect.aspx
I'm a bit new to business objects software as this system was setup way before I started working for this company and noone that put this system in place has worked here for a while now. So I'm hoping some of you can help me out a bit or atleast point me in the right direction.

Disregard that last post. I have gotten into Central Management Console. My next question is, where in the CMC do I got to fix the following 2 errors I was getting? I figure that are both talking about the samething but since this is my first time I've been in the CMC I am not sure where to go to fix it.
Event Type:     Error
Event Source:     BusinessObjects_inputfileserver
Event Category:     Startup
Event ID:     35602
Date:      4/8/2011
Time:      10:04:59 AM
User:      N/A
Computer:     PVWEB3
Description:
Fail to register with the nameserver. Please check for name duplication and validness of name used: Input.PVWEB3
and
Event Type:     Error
Event Source:     BusinessObjects_inputfileserver
Event Category:     Services
Event ID:     34200
Date:      4/8/2011
Time:      10:04:59 AM
User:      N/A
Computer:     PVWEB3
Description:
Failed to register with the name server. Reason: The server name being registered is invalid. There might be another server registered using the same name. Choose another name or delete the corresponding server entry in the CMC.

Error 1923. Service 'Input File Repository Server' (BOBJInputFileServer) co

I get the following error:
Error 1923. Service 'Input File Repository Server' (BOBJInputFileServer) could not be installed. Verify that you have sufficient privileges to install system services.
I am trying to perform the install as an admin. I previously had the server installed but had to uninstall and now I cannot re-install. how would I do a complete uninstall of all registry components, etc. if necessary?

Ok. Please open the services browser (Start->Programs->Control Panel->Administrative Tools->Services) and check if there are any BOBJ services still listed (like the Input File Repository Server).
If you find any services still listed, please use instsrv.exe to remove them (even if the services are stopped and/or deactivated). Try to install again after you have removed all BOBJ related services.
Regards,
Stratos

Getting BO 4.1 File Repository Server Error

I am trying to save a 2008 report directly from Crystal Reports 2008 to a BO 4.1 repository and I am getting the following error
<Caution Triangle Image> File Repository Server Error:
I am able to upload the 2008 Crystal Report using the Add / Local Document directly to the BO 4.1 server but it only allows me to make a copy not overwrite.
Does anyone know what I need to do, if anything to get it so I can save the report directly form Crystal Reports
thanks

Hi Alan,
CR 2008 is supposed to work with BO XI 3.1. For BI 4.1 you should use CR 2013.
-Abhilash

Error in Configuring the File Repository Server (FRS)

Hi All.
We are using sap bo 3.1 sp7
Huge space is occupied by File store folder .
So we are planning to move to share drive entire folder
as per few documents in Scn.sap .I followed the steps and made changes in cmc---core services--input and output file repository for successfully..
Note : I Restart each of the modified servers and Enable the servers and i restarted SIA
but still iam facing
Consider it as a high priory issue
Thanks,
Raghunath

Hi Raghu Go through below link it maybe helpful. http://wiki.scn.sap.com/wiki/display/BOBJ/File+Repository+Server http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=322437724 http://blogs.hexaware.com/business-objects-boogle/business-objects-file-repository-servers/

An Error has occurred: File Repository server input is down

Hello Team,
I am getting the following error message "An Error has occurred: File Repository server input is down" when try to upload exel or any other document in repository using . NET Infoview. Even with the Admin account.
and
If i try the same steps from Java Infoview i am able to upload the excel.
I guess some issue with IIS .
Env Dtls:
BO XI 3.1 SP3
IIS 7
Windows server 2008.
Waiting for your valuable suggestions.
Regards,
Sonu Pandita

Hi Team,
I resolved this issue by giving one user a permission on temp folder.
Regards,
Sonu Pandita

File Repository Server error : Failed to determine whether there is enough

Hi, We have setup a new server and while loading file we are getting following error message.
File Repository Server error : Failed to determine whether there is enough disk space. We are on BOXI R2 SP3 on windows server 2003 with WAS on IIS 6.0.
From CMC the error message is:
There was an error while retrieving data from the server: Unable to open file C:\WINDOWS\TEMP\tmp875.txt.
I ran Input FRS with a particular port and was able to ping FRS on that port. So port is opened.
Does anyone know reason for this?
Thanks,
Kalpesh

Can you elaborate exactly what you had to resolve this issue.
Thanks, Mani

SQL Error 130, not found in ERROR.SQL file.

Dear All,
While connecting my application with Oracle Release 9.2.0.8.0 I am having the following error message would any one help in this regard please?
SQL Error 130, not found in ERROR.SQL file
Thanks
GQ

How is this connection being made?
Is it Oracle Forms, SQL*Plus, Java, .NET, JDBC etc?
The error message doesn't look like a standard ORA-XXXXX oracle error so I would suggest the message relates to the application trying to make the connection.

Try to create a pdf file in photoshop Get Distiller error %%[ Error: Helvetica not found. Font cannot be embedded. ]%%

Hello,
when i try to create a pdf file in photoshop CC with the printer "Adobe PDF" in Optimal Quality, document is not created and i get an error log file with this content :
%%[ ProductName: Distiller ]%%
%%[ Error: Helvetica not found. Font cannot be embedded. ]%%
%%[ Error: invalidfont; OffendingCommand: findfont ]%%
Stack:
/Font
(Helvetica)
/_Helvetica
[39 /quotesingle 96 /grave 130 /quotesinglbase /florin /quotedblbase
/ellipsis /dagger /daggerdbl /circumflex /perthousand /Scaron
/guilsinglleft /OE /.notdef /.notdef /.notdef /.notdef /quoteleft
/quoteright /quotedblleft /quotedblright /bullet /endash /emdash
/tilde /trademark /scaron /guilsinglright /oe /.notdef /.notdef
/Ydieresis]
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
Does anyone have an idea ?
Thanks a lot.

Hi,
The D810 requires Camera Raw 8.6 or later - the latest version that is compatible with Photoshop Elements 12 is Camera Raw 8.5 as far as I can see.
You need to either buy a new version of Photoshop Elements or use the free Adobe DNG converter.
DNG Converter 8.8
Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5888
Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5887
Useful Tutorial
http://www.youtube.com/watch?v=0bqGovpuihw
Brian

Error: The requested URL was not found, or cannot be served at this time.

Hi gurus,
I have a report that has a parameter file. When I call the report the parameter form is displayed but after I enter the parameter values and click SUBMIT QUERY, I receive this error:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Reports Server name is not specified.
If I run the report without parameter file it runs fine.
Does anyone have an idea on how I can make this work.
Thanks

* Can you please tell what version of Reports you are using ie 6i or 9i and the exact version [ In builder give Help->About] . In this problem we cannot deduce anything from the version. But if it is very old, we can recommend installing the latest patch.
* Please post the full command line request. If you have used any keys in cgicmd.dat , please post the expansion of that keys also.
* If possible as a workaround give paramform=no&paramName=paramValue ... in request till this problem is resolved.
Thanks
The Oracle Reports Team

Error: File Not Found on File Repository Server

Similar Messages

Maybe you are looking for