Error file

In Oracle Where Error File Will Store When a Error Rise In Query Execution

An sql error log doesn't exist in Oracle.
You neen an application-level log.
max.

Similar Messages

Error is not getting logged in error file while running dataload maxl

Hello All,
I am running a Maxl to load data in a database which is running fine but noted a weird issue that the errors are not getting logged in error file. Suppose i changed the name of data file then it should give error something like
ERROR - {Error no.} - Unable to open file {filename} which should be logged in error file but my error file is still empty.
I am using the Maxl -
import database {dbname} data from data_file {filename} on error append to "D:/Error/errorfile.err";
Any inputs please...
Thanks

Try to use single quotes and the backslash. It may depend on the operating system and /or the version of essbase used. This is an example from one of my maxls:
on error append to 'D:\Hyperion\logfiles\myload.err';
cheers, chris

Error: "File couldn't be opened for writing" with CinemaDNG sequence

Using a Premiere Pro > After Effects workflow with my colorist.
I created a project in Premiere CS6 and used MOV transcodes because Premiere CS6 does not read CinemaDNG sequences. I do not have CC installed on my computer. My colorist, on his computer (we are both using Mavericks), imported the .prproj into AE CS6. We tried to replace MOV files with CinemaDNG sequences, and AE returned this error:
After Effects error: File couldn't be opened for writing: "[file path]". ( 3 :: 0 )
Normally when you replace footage with a CinemaDNG sequence in AE, Adobe Camera Raw pops open so you can make changes before the file is important. I have never seen this error before.
My colorist has CC installed as well as CS6, so we tried that instead.
Colorist opened the Premiere CS6 project in Premiere CC, creating a new Premiere CC project. Replaced MOV files with CinemaDNG sequences within Premiere CC with no error, project plays fine in Premiere CC. Finally! So we imported the new Premiere CC project in AE CC, and all linked CinemaDNG sequences appear as color bars (unlinked footage). When testing to import a CinemaDNG sequence, AE CC returned the same error as AE CS6.
So we tried opening the same CinemaDNG files in Photoshop CS6 and Photoshop CC to see if there was an error with Camera Raw. Both versions of Photoshop open the CinemaDNG files correctly in Camera Raw (version 8.3). So now we have CinemaDNG files functioning properly in Premiere Pro, Photoshop, but... not AE?
Tried replicating this on a second, Mountain Lion computer with both versions of AE, and returned the same issue.
CinemaDNG files from a different source DID open in AE CC and AE CS6 on both computers, which leads me to believe there is some kind of permissions/metadata issue in this particular set of CinemaDNG files I'm using that's causing problems for AE, but NOT Premiere Pro or Photoshop. Anyone experience anything like this?

try the "oddball problems" fix:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen)

Why does FCP error "File Not Found" when I try to open my sequences????

I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
I hope this helps. Now it's time to play "catch-up"
Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT Mac OS X (10.4.8)

[SOLVED] == ERROR: file not found: `/sbin/dmsetup'

[EDIT] A much simpler way to deal with this is to explicitly ignore the kernel update during a full system update:
pacman -Syu --ignore linux
Then explicitly update the kernel alone:
pacman -S linux
[EDIT] First, after a full system update I had to move the STUB kernel image from the UEFI directory back to /boot, them recreate the images a second time. The systemd service moved it back to the UEFI directory.
[EDIT] The use of 'mdadm_udev' in HOOKS= also seems to be no longer just 'preferred' to the 'mdadm' hook but instead is now mandatory.
I've read the news item...
Changes to LVM
2013-02-12 - Thomas Bächler
With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
If you run pacman -Syu and update device-mapper, linux and lvm2 at the same time, you will get an error message that /sbin/dmsetup is missing. Run mkinitcpio -p linux again after the update to avoid any problems.
...and I do get the message...
==> ERROR: file not found: `/sbin/dmsetup'
...but after a full system update with...
pacman -Syu
...when I execute...
mkinitcpio -p linux
...this is what I get...
Building image from preset: 'default'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
Building image from preset: 'fallback'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
So of course if I reboot I get the dreaded 'No volume groups found' message.
I should mention that I use the systemd path and service to move the kennel after it has been updated.
Last edited by KairiTech (2013-04-07 02:45:12)

With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
Just to confirm. You did all these steps, right?
EDIT: I just noticed something:
KairiTech wrote:HOOKS="base udev autodetect sata mdadm usbinput keymap encrypt lvm2 filesystems timestamp shutdown"
Replace
mdadm
with
mdadm_udev
. Maybe this is nothing, but it is recommended to use this one instead of the other.
NEW EDIT: Expecially this one
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
Last edited by s1ln7m4s7r (2013-03-24 20:42:55)

Error File not Found in CS 5.5

When I go to open up PP CS 5.5 it provides a list of possible projects I can open up. Click on a project and it opens accordingly. However, over the past 2 days it has become problematic. I can click on the listed project but I now receive an error message: Error file not found. PP will not open up. I haven't moved any files, folders or projects around. I have simply closed the project, quit PP and then opened it again when wanting to edit. I have tried opening up the auto saved project file and I receive the same message?

Hi Todd both your solutions (and the one suggested by Colin) works initially. Dbl click the project file and it opens PPro. However, I tried this on another project which has a 3rd party pllugin (Smartsound Sonic Fire Pro) in it. Things get interesting with Smartsound being activated with me unable to quit out of it and I am not able to access Premier Pro. I have to Force Quit both programs. Then when I try to dbl click on the program that opened up OK the error message returns: File format not supported. There is no Smartsound file involved in this project? Same thread? New thread? many thanks for your responses

The dreaded "Video Error-File Not Installed" When trying to watch LiveTV in WMC

I'm getting the following error message when trying to use Live TV in WMC:
Video Error
Files needed to display video are not installed or are not working correctly. Restart Windows Media Center or restart the computer.
On this system my tuners are the Hauppauge HVR 2250 and the Hauppauge HD PVR. It took awhile to set up, but when I click play on a channel I get 10 seconds of video, an audio loop of the same sound over & over followed by the above error message.
I ran into this problem once before on my Home Theater HTPC when trying to access the ATI Cable Card solution. To get that to work I had to uninstall and reinstall Playready. I tried 3 different ways of doing this on my new build & it did
not fix the problem. The only fix I didn't try was the one on Ceton's website that involves a whole lot of deleting of folders.
Since this current build doesn't have a cablecard installed, and gets the non-clear QAM stations from settop box through HD PVR, would it still be the Playready needing to be reset? The symptoms look identical to when I had the previous problem.
These same files play in the BeyondTV that I'm trying to migrate from, so all codecs appear to be onboard. I am using the latest HDPVR MediaCenter driver from the Hauppauge website & the latest drivers on the HVR-2250.
Thanks for any help!

I had this problem after upgrading my graphics card to an AMD 5450 and the solution after a couple of days of hair pulling was one I hadn't come across before in relation to this problem.
It turned out that the problem was caused by the screen refresh rate, it was set to 60Hz by default and I got the Video Error message but if I changed it to 50Hz then playback of recorded programs or watching live TV worked.

[solved] 'ERROR: file not found:' when running 'mkinitcpio -p linux'

$ sudo mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: smsmdtv
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
Things seems to work, but I'm a bit worried.
It has just started. PS/2 atkbd stuff went fine.
journalctl shows
Feb 26 22:36:09 localhost systemd-udevd[62]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[63]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost systemd-udevd[64]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[65]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost kernel: sda: sda1 sda2 sda3 sda4
Feb 26 22:36:09 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Feb 26 22:36:09 localhost systemd-udevd[66]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[67]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export
I'm using [testing] but I don't know if it matters.
What should I post?
Last edited by karol (2014-03-15 15:03:56)

The systemd build hook looks like this:
build() {
local rules unit
# from base
add_binary /bin/mount
add_binary /usr/bin/kmod /usr/bin/modprobe
# systemd
add_binary /usr/lib/systemd/systemd /init
add_binary /usr/bin/systemd-tmpfiles
# generate sysroot.mount and sysroot-usr.mount
add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
# udev rules and systemd units
map add_udev_rule "$rules" \
50-udev-default.rules \
60-persistent-storage.rules \
64-btrfs.rules \
80-drivers.rules \
99-systemd.rules \
map add_systemd_unit \
ctrl-alt-del.target \
initrd-cleanup.service \
initrd-fs.target \
initrd-parse-etc.service \
initrd-root-fs.target \
initrd-switch-root.service \
initrd-switch-root.target \
initrd-udevadm-cleanup-db.service \
initrd.target \
kmod-static-nodes.service \
sockets.target \
[email protected] \
systemd-journald.service \
systemd-tmpfiles-setup-dev.service \
systemd-udev-trigger.service \
systemd-udevd-control.socket \
systemd-udevd-kernel.socket \
systemd-udevd.service
add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
# libdbus needs the passwd info of the root user
# TODO: make sure this is no longer necessary when systemctl moves to sd-bus
add_file "/etc/nsswitch.conf"
add_file "/etc/passwd"
add_binary "$(readlink -f /usr/lib/libnss_files.so)"
# udev wants /etc/group since it doesn't launch with --resolve-names=never
add_file "/etc/group"
Do all of those files exist on your sytemd? I'm not running testing nor systemd in my initrd, so I can't do much checking.
Edit: You're not the only one. Bug report: https://bugs.archlinux.org/task/39059
Last edited by Scimmia (2014-02-27 06:59:55)

Error: file not found

Hello,
I am using a labview program which already exists. The program
inputs a file ( txt file with some numerical data) and gives the output
file at the required location after performing some calculations to it.
The problem is when I input my file path and run the program it always
gives an error ' file not found'. Please help me.
Thanks
Laxmikanth

Hi Laxmikanth,
Some more info would be helpful. Such as posting a image of your program, which version of labview, platform etc.
that being said if you are literally typing in the filepath that is the most likely source for the error. Is there a browse button visible to the right of the filepath control? If not try right clicking and under the visible menu make sure the browse button is selected. Then click on the browse button and find/select your disk file. Now run the program and see if you get the same error.
Cheers,
--Russ

Error : file not found in SharePoint 2010

I have a problem of error "file not found" in a site collection SharePoint 2010.
    I cannot access to home page, the page of list/library/permission,etc. All pages will appear an error "file not found"
    I can access to the page of "all content"
    I can access to the site setting page, but I cannot open the link on this page. For example, I select "quick launch" in "Look and feel" section, it will show an error "file not found".
    I think I must reset my master page, but I cannot use SharePoint Designer (forbidden in my application), I cannot open the link on site setting page, and I cannot open library page to check the master page
    I can access to mobile view, and all pages work well in mobile view, but I did not find site setting page
How could I check the master page? Or this problem has other solution?
Thank you in advance.

You might have referred an image or style sheet or some file from an invalid path. Check the error in detail, where you might be able to know which file or file path is not correct. Then recorrect it in the master page and then refresh the site.
UPDATE - Can you configure the web.config to display the detailed error? Make -
<CustomErrors Mode="Off">, CallStack="true" and
<compilation debug="true" />
Do an IISReset and then refresh the site.

"Error in creating error file" message

Tried to install Palm Desktop 6.2 that came with my new Centro and at the end the message "Error in creating error file" keeps popping up numerous times.
What can be the reason?
Post relates to: Centro (AT&T)

I was also experiencing the "error in creating error file" message multiple times during installation on my XP Pro system. I googled the error message and found this post plus a reference to a problem with riched32.dll) in in another post. But that didn't help. After quite a bit of troubleshooting on my own, I found the problem. I had moved the "My Documents" folder under "D:\users" to simplify my backups. Apparently the Palm installer needs the "My Documents" folder on the C: drive. I temporarily put "My Documents" back into it's default location under "C:\Documents and Settings" and the Palm installer ran just fine with no error message. I then moved everything back under "D:\users" including the folder "Palm OS Desktop", that was created by the Palm installer and everything has been working fine since.
Thought I'd share this with others, as it's not an obvious fix.
Post relates to: Palm TX

What could be the reason for this error file

Hi,
What could be reason for this error file, the content of the error file is :
Compiling INSERT-PROCEDURE trigger on IOTDISPUTE_FILES data block...
No compilation errors.
Compiling UPDATE-PROCEDURE trigger on IOTDISPUTE_FILES data block...
No compilation errors.
Compiling DELETE-PROCEDURE trigger on IOTDISPUTE_FILES data block...
No compilation errors.
Compiling LOCK-PROCEDURE trigger on IOTDISPUTE_FILES data block...
No compilation errors.
Compiling INSERT-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Compiling UPDATE-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Compiling DELETE-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Compiling LOCK-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Created form file X:\IOT\IOT_SupportingSystem\Forms\IOTRAP.fmx
I am getting this error while compiling a form with DML sources are Database Procedure.
Thanks in advance.
Rizly

Hi,
Sorry for the delayed response. These informations are generated in the FormName.err file. If its not the error, then why its not generating for other forms. As I mentioned earlier, this fom has DML sources by the Database Procedures, that could be the reason ?, this is my first project in Forms.
The content of the IOTRAP.err file:
Compiling DELETE-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Compiling LOCK-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Created form file X:\IOT\IOT_SupportingSystem\Forms\IOTRAP.fmx
Thanks in advance.
Rizly

PO PDF Error - File does not Begin with '%PDF-'

Hi,
I am working on Implementing PO PDF with XML data and RTF Template. I have created a new template in XML Publisher and followed the following set up steps
Setup / Organizations / Purchasing Options / Control TAB / set 'PO Output Format' = 'PDF'
setup / purchasing / document types / select "Standard Purchase Order" / Set the Document Type Layout to your new template.
When I view the document from PO Summary > inquire > View Document, I get an adobe reader error
'File does not begin with '%PDF-', how ever when I preview it from the template definition, it opens fine.
I tried running PO Output for communication with my custom template but I don't see the parameter 'Purchase Order Layout'. The last parameter in the list is 'Include Blanket'.
Am I missing any set up steps? However when I use the standard Purchase Order Layout in Document Types set up, the Inquire > View Document created a PDF output.
Any help is greatly appreciated.
Thanks,
Sharmila

I encountered same error in BPA Invoice Print. I remove a MLS function from the program definition and this error disappeared. Have not fully investigated but maybe this will help. Thanks.

How to resolve the error "File could not open" in AL11?

Hi Friends,
When I am going to write a file via DATASET.
But it's showing me a error"File Could not Found"?
And I am unable to check my fiel at AL11.
Please suggest me the solutions.
Regards
Ricky

Hi,
Try this code
TYPES : BEGIN OF ty_emp,
empno(2) TYPE c,
empid(10) TYPE c,
empname(3) TYPE c,
END OF ty_emp.
DATA : it_emp TYPE TABLE OF ty_emp,
wa_emp TYPE ty_emp.
DATA : pbk TYPE string.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : p_file TYPE rlgrap-filename default 'D:\EMP.TXT'.
PARAMETERS : p_asfile TYPE rlgrap-filename default 'EMP'.
SELECTION-SCREEN END OF BLOCK b1.
pbk = p_file.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                      = pbk
FILETYPE                      = 'ASC'
has_field_separator           = ' '
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
    TABLES
      data_tab                      = it_emp
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
OPEN DATASET p_asfile FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
LOOP AT it_emp INTO wa_emp.
    TRANSFER wa_emp TO p_asfile.
ENDLOOP.
CLOSE DATASET p_asfile.
==============================================
Regards,
Krrishna

PXE T01 file not found PXE E3B TFTP Error file not found error

Hi,
I was trying to deploy OS through SCCM . i have made DHCP server and SCCM PC one PCst when i am trying to boot from client to DHCP by f12 i am getting following error. so that i have been completed following steps
TFTP
PXE-T01: File not found
PXE:E3B: TFTP Error- File not found
1)Removed WDS service and reconfigured
2)PXE role removed and re assigned
3)renamed temp folder
4)DP updated
suppose if i am trying to access the port throgh telnet
i am getting
C:\Documents and Settings\Administrator>telnet 192.168.1.65 60
Connecting To 192.168.1.65...Could not open connection to the host, on port 60:
Connect failed
C:\Documents and Settings\Administrator>telnet 192.168.1.65 67
Connecting To 192.168.1.65...Could not open connection to the host, on port 67:
Connect failed
C:\Documents and Settings\Administrator>telnet 192.168.1.65 66
Connecting To 192.168.1.65...Could not open connection to the host, on port 66:
Connect failed
C:\Documents and Settings\Administrator>telnet 192.168.1.65 65
Connecting To 192.168.1.65...Could not open connection to the host, on port 65:
Connect failed
SCCM PXEsetup.log
====================================================================
<05-17-2011 22:02:14> SMSPXE Setup Started....
<05-17-2011 22:02:14> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-17-2011 22:02:14> Installing Pre Reqs for SMSPXE
<05-17-2011 22:02:14>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-17-2011 22:02:14> Found 2 Pre Reqs for Role SMSPXE
<05-17-2011 22:02:14> Pre Req MSXML60 found.
<05-17-2011 22:02:14> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-17-2011 22:02:14> Pre Req MSXML60 is already installed. Skipping it.
<05-17-2011 22:02:14> Pre Req Wimgapi found.
<05-17-2011 22:02:14> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-17-2011 22:02:14> Pre Req Wimgapi is already installed. Skipping it.
<05-17-2011 22:02:14>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-17-2011 22:02:14> Installing the SMSPXE
<05-17-2011 22:02:14> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-17-2011 22:02:14> Error - WDS is not installed. Installation cannot continue
<05-17-2011 23:02:35> ====================================================================
<05-17-2011 23:02:35> SMSPXE Setup Started....
<05-17-2011 23:02:35> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-17-2011 23:02:35> Installing Pre Reqs for SMSPXE
<05-17-2011 23:02:35>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-17-2011 23:02:35> Found 2 Pre Reqs for Role SMSPXE
<05-17-2011 23:02:35> Pre Req MSXML60 found.
<05-17-2011 23:02:35> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-17-2011 23:02:35> Pre Req MSXML60 is already installed. Skipping it.
<05-17-2011 23:02:35> Pre Req Wimgapi found.
<05-17-2011 23:02:35> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-17-2011 23:02:35> Pre Req Wimgapi is already installed. Skipping it.
<05-17-2011 23:02:35>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-17-2011 23:02:35> Installing the SMSPXE
<05-17-2011 23:02:35> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-17-2011 23:02:35> Error - WDS is not installed. Installation cannot continue
<05-17-2011 23:38:26> ====================================================================
<05-17-2011 23:38:26> SMSPXE Setup Started....
<05-17-2011 23:38:26> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-17-2011 23:38:26> Installing Pre Reqs for SMSPXE
<05-17-2011 23:38:26>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-17-2011 23:38:26> Found 2 Pre Reqs for Role SMSPXE
<05-17-2011 23:38:26> Pre Req MSXML60 found.
<05-17-2011 23:38:26> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-17-2011 23:38:26> Pre Req MSXML60 is already installed. Skipping it.
<05-17-2011 23:38:26> Pre Req Wimgapi found.
<05-17-2011 23:38:26> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-17-2011 23:38:26> Pre Req Wimgapi is already installed. Skipping it.
<05-17-2011 23:38:26>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-17-2011 23:38:26> Installing the SMSPXE
<05-17-2011 23:38:26> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-17-2011 23:38:26> WDS Service is installed.
<05-17-2011 23:38:26> No versions of SMSPXE are installed. Installing new SMSPXE.
<05-17-2011 23:38:26> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-17-2011 23:38:26> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-17-2011 23:39:47> pxe.msi exited with return code: 0
<05-17-2011 23:39:47> Installation was successful.
<05-18-2011 22:20:04> ====================================================================
<05-18-2011 22:20:04> SMSPXE Setup Started....
<05-18-2011 22:20:04> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /deinstall /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 22:20:04> Deinstalling the SMSPXE
<05-18-2011 22:20:04> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 22:20:04> Deinstalling SMSPXE, with product code {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}
<05-18-2011 22:20:15> SMSPXE deinstall exited with return code: 0
<05-18-2011 22:20:15> Deinstallation was successful.
<05-18-2011 22:20:15> Removing PXE Registry.
<05-18-2011 22:23:18> ====================================================================
<05-18-2011 22:23:18> SMSPXE Setup Started....
<05-18-2011 22:23:18> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 22:23:18> Installing Pre Reqs for SMSPXE
<05-18-2011 22:23:18>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-18-2011 22:23:18> Found 2 Pre Reqs for Role SMSPXE
<05-18-2011 22:23:18> Pre Req MSXML60 found.
<05-18-2011 22:23:18> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-18-2011 22:23:18> Pre Req MSXML60 is already installed. Skipping it.
<05-18-2011 22:23:18> Pre Req Wimgapi found.
<05-18-2011 22:23:18> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-18-2011 22:23:18> Pre Req Wimgapi is already installed. Skipping it.
<05-18-2011 22:23:18>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-18-2011 22:23:18> Installing the SMSPXE
<05-18-2011 22:23:18> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-18-2011 22:23:18> WDS Service is installed.
<05-18-2011 22:23:18> No versions of SMSPXE are installed. Installing new SMSPXE.
<05-18-2011 22:23:18> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 22:23:18> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-18-2011 22:24:11> pxe.msi exited with return code: 0
<05-18-2011 22:24:11> Installation was successful.
<05-18-2011 22:31:06> ====================================================================
<05-18-2011 22:31:06> SMSPXE Setup Started....
<05-18-2011 22:31:06> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 22:31:06> Installing Pre Reqs for SMSPXE
<05-18-2011 22:31:06>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-18-2011 22:31:06> Found 2 Pre Reqs for Role SMSPXE
<05-18-2011 22:31:06> Pre Req MSXML60 found.
<05-18-2011 22:31:06> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-18-2011 22:31:06> Pre Req MSXML60 is already installed. Skipping it.
<05-18-2011 22:31:06> Pre Req Wimgapi found.
<05-18-2011 22:31:06> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-18-2011 22:31:06> Pre Req Wimgapi is already installed. Skipping it.
<05-18-2011 22:31:06>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-18-2011 22:31:06> Installing the SMSPXE
<05-18-2011 22:31:06> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-18-2011 22:31:06> WDS Service is installed.
<05-18-2011 22:31:06> SMSPXE already installed (Product Code: {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}). Upgrading/Reinstalling SMSPXE
<05-18-2011 22:31:06> New SMSPXE is the same product code. This is a minor upgrade.
<05-18-2011 22:31:06> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 22:31:06> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-18-2011 22:35:43> pxe.msi exited with return code: 0
<05-18-2011 22:35:43> Installation was successful.
<05-18-2011 23:41:19> ====================================================================
<05-18-2011 23:41:19> SMSPXE Setup Started....
<05-18-2011 23:41:19> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /deinstall /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 23:41:19> Deinstalling the SMSPXE
<05-18-2011 23:41:19> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 23:41:19> Deinstalling SMSPXE, with product code {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}
<05-18-2011 23:41:33> SMSPXE deinstall exited with return code: 0
<05-18-2011 23:41:33> Deinstallation was successful.
<05-18-2011 23:41:33> Removing PXE Registry.
<05-19-2011 00:38:50> ====================================================================
<05-19-2011 00:38:50> SMSPXE Setup Started....
<05-19-2011 00:38:50> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-19-2011 00:38:50> Installing Pre Reqs for SMSPXE
<05-19-2011 00:38:50>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-19-2011 00:38:50> Found 2 Pre Reqs for Role SMSPXE
<05-19-2011 00:38:50> Pre Req MSXML60 found.
<05-19-2011 00:38:50> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-19-2011 00:38:50> Pre Req MSXML60 is already installed. Skipping it.
<05-19-2011 00:38:50> Pre Req Wimgapi found.
<05-19-2011 00:38:50> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-19-2011 00:38:50> Pre Req Wimgapi is already installed. Skipping it.
<05-19-2011 00:38:50>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-19-2011 00:38:50> Installing the SMSPXE
<05-19-2011 00:38:50> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-19-2011 00:38:50> WDS Service is installed.
<05-19-2011 00:38:50> No versions of SMSPXE are installed. Installing new SMSPXE.
<05-19-2011 00:38:50> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-19-2011 00:38:50> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-19-2011 00:39:15> pxe.msi exited with return code: 0
<05-19-2011 00:39:15> Installation was successful.

I have similar issue same above error but this error i am getting intermittent keeping trying 2 or 3 times i get F12 option to boot the network services
TFTP
PXE-T01 The specified file not found
PXE-E3B TFTP Error : File not found
Our environment have DHCP configured In Inflobox and the Primary site server and PXE DP server located in Same Subnet and configured 2008 R2 sp1 and configured SCCM2012 in VM environment
I tried all the Options uninstall and re-install no luck and i have tried to increase Tramsmiit and recive Buffer size in lan card but the issue is not resolved.
Capture smspxe log when it found boot image the pxe working ,when it not found getting TFTP error.
SMSPxe log says no errors but getting client Pxe TFTP error file not found (Since its not looking Image throw out TFTP error)
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777230" ServerName="" ServerRemoteName=""><Machine><ClientID>GUID:49D9F374-7606-4277-8AE9-FEE608FFB01E</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="SGP20001" OfferIDTime="6/25/2012 11:09:00 AM" PkgID="SGP00009" PackageVersion="" PackagePath="http://XXX.company.com/SMS_DP_SMSPKG$/SGP00004" BootImageID="SGP00004" Mandatory="0"/></ClientIDReply>
Client Identity: 9c7f0d6a-58dd-4cda-a4f0-3f66316067fb
PXE::CBootImageManager::FindMatchingArchitectureBootImage
Set media certificate in transport
Set authenticator in transport
SMSPxe log says no errors t i can able to do pxe Log found Boot image
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777230" ServerName="" ServerRemoteName=""><Machine><ClientID>GUID:49D9F374-7606-4277-8AE9-FEE608FFB01E</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="SGP20001" OfferIDTime="6/25/2012 11:09:00 AM" PkgID="SGP00009" PackageVersion="" PackagePath="http://xxx.company.com/SMS_DP_SMSPKG$/SGP00004" BootImageID="SGP00004" Mandatory="0"/></ClientIDReply>
Client Identity: 9c7f0d6a-58dd-4cda-a4f0-3f66316067fb
PXE::CBootImageManager::FindMatchingArchitectureBootImage
PXE::CBootImageManager::FindBootImage: SGP00004
Looking for bootImage SGP00004
PXE::CBootImageCache::FindImage
PXE::CBootImageInfo::UpdateAccessTime
Appreciate if you could provide some solution
Ksrini

JVM crash on IE app on PC's , Error file left on desktop

I have a web based application with Struts and an activeX plug in in and extended desktop with two screens in Kiosk mode. One app with three frames. One frame for each screen and one frame with a small Java pause applet used to augment Javascript functions that need a pause.<br><br>
The application runs fine then randomly and occasionally (about once every day or two) the browser disapears and the following error file from the JVM is left on the desktop.
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x6D07014F
Function=Java_sun_awt_windows_WColor_getDefaultColor+0x28D4
Library=C:\Program Files\Java\j2re1.4.1_02\bin\awt.dll
Current Java thread:
     at sun.awt.windows.WToolkit.eventLoop(Native Method)
     at sun.awt.windows.WToolkit.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Dynamic libraries:
0x00400000 - 0x00419000      C:\Program Files\Internet Explorer\IEXPLORE.EXE
Local Time = Thu Feb 15 18:37:23 2007
Elapsed Time = 667
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.1_02-b06 mixed mode)
Any ideas what might be causing this failure. Its a production application so this is a serious problem for us.
Thanks
---John Putnam

At first glance this looks like either a bad oop map being generated from the HotSpot server compiler or bad JNI code storing an invalid object into a field via the JNI interface.
If you run with -client rather than -server, does the crash go away? If so, that would confirm the first hypothesis.
Have you tried running with 5.0u5? If you can't (or don't want to) run with that JDK, you could drop the appropriate jvm.dll from the 5.0u5 JDK into your 1.4.2 JDK and that should run. If the crash still occurs with that configuration then the hs_err log should at least be more useful than the one from 1.4.2. I would also recommend running with -Xcheck:jni on 5.0u5 to see if any bad JNI calls are detected in ColdFusion's native code.

Error file

Similar Messages

Maybe you are looking for