Error files at ftp server

Hi,
In the Idoc to File scenario,error file are also generated at ftp server which are just the prototypes of the idoc sent.How can I stop this error file generation??
Thanks,
Ratna

<i>18:27>>FOUND: XML. Calling XML parser
18:27>>Looking up FILENAME: PA, IDOCTYP: DELVRY03, MESTYP: DESADV 18:27>>NO APRF FOUND!
18:27>>ERROR: ERROR: XML lookup not found ERROR: XML lookup not found
18:27>>ERROR: Renaming remote file: PA20071104-192623-151.xml
18:27>>ERROR: To remote file: PA20071104-192623-151.xml.ERROR
---> RNFR PA20071104-192623-151.xml
350 File exists, ready for destination name
---> RNTO PA20071104-192623-151.xml.ERROR</i>
>>>
are you using the File adapter ?
In that case please confirm the following;
1. Is any adapter module attached to the file adapter ? (check the modules tab in the adapter)
2. Also confirm the parameters used in the adapter.

Similar Messages

Connection refused Error while writing file to FTP server.

Hi All,
We got below error while writing file to FTP server. Any one have any idea on this?
sABCS_1.0_8e88588d4fb54ebd2ac7ef66c8421d52.tmp/writeEncryptedFile.wsdl [ Put_ptt::Put(opaque) ] - Could not invoke operation 'Put' against the 'FTP Adapter' due to:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server. [Caused by: Connection refused]
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.

Hmmm ...
Same issue as your post from three months' earlier?
Re: Error while putting file in sftp location.

Reading a file from ftp server

Hi
I am able to put file on ftp server using ftp adapter.But same settings are not working while polling file on ftp.
Do i need to do some settings for get operation??

Hi,
Check the file permissions and for testing give all read/write/execute permissions to the file to be read from FTP. Also check the file modification date of the file.
Check for the logs at 2 places for any error messages:
- SOA server diagnostics logs
- FTP server logs
You can also enable the FINEST level of Adapter logs for adapters and see for the detailed errors in the diagnostic logs.
FMW Console > right click soa-infra > Logs > Log Configuration > expand oracle.soa > set Trace32 : FINEST for oracle.soa.adapter
Regards,
Neeraj Sehgal

Error connecting to ftp server

Dear All,
I'm doing file to file scenario through XI. The receiver communication channel is a normal file adapter and it is working perfectly fine . My sender communication channel is a FTP adapter. I'm trying to send a file from FTP to a folder on my integration engine. When i went into adapter monitoring, i got the error in the sender file adaper for ftp. The error is - " Error connecting to ftp server ".
normally, i'm able to do the ftp from integration server to my ftp server, but through XI , it is giving me the above mentioned error. I think some of my properties are not specified correctly. Kindly advise . The properties that i have specified in the ftp adapter are -
adapter type - file
transport protocol - ftp
message protocol - file
adapter engine - integration server
server - ip address of the ftp host
port - 21
username - username of the ftp server
password - password of the ftp user
connect mode - per file transfer
transfer mode - binary
folder - name of the folder created on the ftp root directory ( without the path ) Do i need to give the full path here ?
file name - file in the above specified folder
Kindly let me know.
Regards.
Naveen

HI Naveen,
This link explains all the parameters that need to be entered for a file adpater. Just check it out and compare it with your values and your FTP settings.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
//folder - name of the folder created on the ftp root directory ( without the path ) Do i need to give the full path here ?
Yes, i think you should specify the full path here.
Regards,
bhavesh

Running a batch file on ftp server

HI All,
i am trying to use Command line facility of file adapter to run a batch file..
i batch file i have a single command as
mkdir ranjeet.
how should i call this batch file from file adapter..
i tried putting batch file name in the command line section. I had copied the batch file on ftp server at location of Target Directory..but in audit log of adapter i am getting error as OS command cannot be executed..

Ranjeet,
>>ok..but what will command to be run of ftp run..
How do you expect any one of us to know what your ftp server is based on.
The previous reply by Carme has answered your XI query and to the point. You acknowledge it with a <b>ok</b>!! I guess it is too rude on your part.
Anway answering your question, that depends on your FTP server. Log in to your FTP server manally and try executing these commands and check.
Regards,
Jai Shankar

No Data in PDF file in FTP server

Hi All,
I am trying to place a PDF file in FTP server.
Used
CONVERT_OTFSPOOLJOB_2_PDF to convert spool to PDF
SCMS_TEXT_TO_XSTRING
FTP_R3_TO_SERVER to transfer data to FTP.
I am able to see PDF file in FTP and no of pages matches with that of R/3 but there is no data in PDF file.

To get pdf file , you need to set the itcpo-tdgetotf = 'X' and need to pass in the exporting parameter (options in open_form function module ).Then in close_form function module take all the data of otfdata table into an internal table . Then use SX_OBJECT_CONVERT_OTF_PDF function module to convert it to pdf.
I will show with an example.
tables itcpo.
DATA: ch_otf TYPE STANDARD TABLE OF itcoo.
DATA: w_otf TYPE itcoo.
DATA: w_pdf TYPE solisti1. "For PDF
DATA: i_content_txt TYPE soli_tab.
DATA: temp1 TYPE sx_format VALUE 'OTF',
        temp2 TYPE sx_format VALUE 'PDF'.
DATA: c_printer TYPE sx_devtype VALUE 'PRINTER'.
DATA: w_transfer_bin TYPE sx_boolean. "Content
DATA: i_content_bin TYPE solix_tab, "Content
        wa_content_bin TYPE solix,
        i_objhead TYPE soli_tab.
itcpo-tdnoprint = 'X'.
itcpo-tdpreview = 'X'.
itcpo-tdgetotf = 'X'.
These three parameters need to be passed along with other required parameters
CALL FUNCTION 'OPEN_FORM'
       EXPORTING form = xformular
                 language = ekko-spras
                 OPTIONS = itcpo
                 archive_index = toa_dara
                 archive_params = arc_params
                 device = xdevice
                 dialog = xdialog
                 mail_sender        = sender
                 mail_recipient     = recipient
       EXCEPTIONS canceled = 01.
CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
      RESULT = RESULT
    tables
      otfdata = ch_otf.
LOOP AT ch_otf INTO w_otf.
    CONCATENATE w_otf-tdprintcom w_otf-tdprintpar
    INTO w_pdf.
    APPEND w_pdf TO i_content_txt.
ENDLOOP.
converting otf file to pdf file
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
    EXPORTING
      format_src      = temp1        "'OTF'
      format_dst      = temp2        "'PDF'
      devtype         = c_printer
    CHANGING
      transfer_bin    = w_transfer_bin
      content_txt     = i_content_txt
      content_bin     = i_content_bin
      objhead         = i_objhead
      len             = v_len_in
    EXCEPTIONS
      err_conv_failed = 1
      OTHERS          = 2.
Then open dataset and transfer to ftp of the content of table content_bin(i_content_bin) as shown in above example.
I think this will be helpful for you

Problem while reading the file from FTP server

Hi Friends,
I have a problem while fetching files from FTP server.
I used FTP_Connect, FTP_COMMAND function modules. I can able to put the files into FTP server.
but I cant able to pick the files from FTP server.
anyone have faced similar issues kindly let me know.
Thanks
Gowrishankar

Hi,
try this way..
for reading the file using FTP you need to use different unix command ..
Prabhuda

How to read .xls file from FTP server t oInternal table

Hi
am using the FTP_SERVER_TO_R3 to read xls file from FTP server to internal table
but the data i get in LT_TEXT is special characters.
CALL FUNCTION 'FTP_SERVER_TO_R3'
EXPORTING
handle = hdl
fname = f_name "ProdDataFromCRM.xls.
* CHARACTER_MODE = 'X'
* IMPORTING
* BLOB_LENGTH =
TABLES
BLOB = lt_text
* TEXT = lt_text
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4
can any one help me out to get the exact data..
Really appreciate your quick response..
Thank You

Hi, if you really retrieve an excel file, you can not see the data in ABAP. You may see them in Excel. For this you may use
CALL METHOD document->open_document_from_table
of the interface i_oi_document_proxy for OLE objects. You can access the data with reference to the interface i_oi_spreadsheet.
Please check [Desktop Office Integration (BC-CI)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf] for details.
But, who knows, perhaps you want "And Now For Something Completely Different".
Regards
Clemens

Need to copy .txt file from FTP server and downloaded on local server directory.

I need to figure out a way to copy .txt file from ftp server in local server directory using sql jobs.

Below links will help achieving it:
https://www.virtualobjectives.com.au/sqlserver/ftp_scripts.htm
http://www.mssqltips.com/sqlservertip/2884/sql-server-integration-services-ssis-ftp-task-for-data-exchange/

How to read XL file from FTP server

Hi all,
I have a requirement like to read file from FTP server using path
ftp:
10.212......\DTR\DTR_ Accounted_Out
and again save other file in same location ,
to doing this RFC connection is required?
give a procedure or program to do this requirement ..
To create rfc for FTP which connection type can i use ?
Give complete settings to create rfc destination

Hi Rakhi,
Use the below code to check if you have received the proper data.
call function 'FTP_SERVER_TO_R3' "Get data as character instead of BLOB
    exporting
      handle         = hdl
      fname          = docid
      character_mode = 'X'
    tables
      text           = chardata.
If the data is incorrect, it is possible that you are in the wrong directory.
Use
call function 'FTP_COMMAND'
    exporting
      handle        = hdl
      command       = 'cd mydir\mysubdir' "cd <space> your path
    tables
      data          = result
    exceptions
      tcpip_error   = 1
      command_error = 2
      data_error    = 3.
Regards,
Jovito.

Problem in download file from FTP server

Hi
I want to download a file from FTP server for that i am using the apache FTP module but i am not getting how to download a file with that api i can dispaly the list of files and folders but not able to download the file or folder can any one help me in this
Thanks
Ninad

Hi
I think you miss understood something I am writing a program to download the file in Java where i have used the jakarta.apache api for that and getting problem in that bellow is the code where I have written to print the directory & file names but I don't know how to download the file
FTPClient ftpConnection = new FTPClient();
ftpConnection.connect(host);
ftpConnection.login(FTPConnection.userName,FTPConnection.password);
FTPFile fileList[] = ftpConnection.listFiles();
for(int i=0;i<fileList.length;i++)
System.out.println(fileList.getName());
thanks
Ninad

How to get file from FTP Server using File Control

Hi,
Any one did getting file from FTP Server?
Please let me know any one help me.
I would need to get file from FTP Server.
Thanks,
Madhu

Yes I have done that. But In FTP Server I cannt read file, because no previliges. Only I need to copy file from FTP Server to local server then only I can read that file.
I tried all options using FileConrol(getFiles(),read()).
getFiles() - It wont copy the file, it give information about file.
read() - I dont have previliges to read the file.
Please tell me any other procedure would be there for getting file from FTPServer.
Thanks,
Madhu

[HELP] Download file from FTP server

hi,
I want to write a java program that can download and upload files from ftp server. Currently I only manage to upload a file to ftp server but i cant download file from ftp server. Here is the source code that only allow user to upload file. Anyone can give me some guidelines so that my program can download and also upload file? thx.
import java.io.*;
import java.net.*;
public class FTPUpload {
private static final int CTRLPORT = 21;
private static Socket ctrlSocket;
private static PrintWriter ctrlOutput;
private static BufferedReader ctrlInput;
private static byte[] localHostAddress;
public final static String DIR = "C:\\zip\\";
public static void main(String[] args) {
try {
String host = "192.168.1.1";
String loginName = "testuser";
String password = "password";
String dirName = "/home/testuser";
String fileName = "hello.zip";
ctrlSocket = new Socket(host, CTRLPORT);
localHostAddress = ctrlSocket.getLocalAddress().getAddress();
ctrlOutput = new PrintWriter(ctrlSocket.getOutputStream());
ctrlInput = new BufferedReader(new InputStreamReader(ctrlSocket.getInputStream()));
ctrlOutput.println("USER " + loginName);
ctrlOutput.flush();
ctrlOutput.println("PASS " + password);
ctrlOutput.flush();
ctrlOutput.println("CWD " + dirName);
ctrlOutput.flush();
ctrlOutput.println("TYPE I");
ctrlOutput.flush();
FileInputStream fis = new FileInputStream(DIR + fileName);
Socket dataSocket = dataConnection("STOR " + fileName);
OutputStream outstr = dataSocket.getOutputStream();
int n;
byte[] buff = new byte[1024];
while ((n = fis.read(buff)) > 0) {
outstr.write(buff,0,n);
dataSocket.close();
fis.close();
ctrlOutput.close();
ctrlInput.close();
ctrlSocket.close();
}catch (Exception e) {
e.printStackTrace();
private static Socket dataConnection(String ctrlcmd)
throws IOException,UnknownHostException {
String cmd = "PORT ";
ServerSocket serverDataSocket = new ServerSocket(0,1);
for (int i=0;i<4;i++) {
cmd = cmd + (localHostAddress[i] & 0xff) + ",";
cmd = cmd + (((serverDataSocket.getLocalPort())/256) & 0xff)
+ ","
+ (serverDataSocket.getLocalPort() & 0xff);
ctrlOutput.println(cmd);
ctrlOutput.flush();
ctrlOutput.println(ctrlcmd);
ctrlOutput.flush();
Socket dataSocket = serverDataSocket.accept();
serverDataSocket.close();
return dataSocket;
}

Or just use a java.net.URL("ftp://...) ..., get its input stream, and away you go ...

Upload XL file from FTP server

Hi All,
Can anybady help me, how to upload Excel file from FTP server.
Thanks
Sri
Edited by: srikanthn on Apr 14, 2010 6:31 PM

Hello
How about using SAPFTP?
I hope SAP note 130106 will guide you on this.
Thanks
koju

Regaring file from FTP server to application server

Hi frnds,
Below is my code where i am transferring Presentation server file to FTP server.
Now i want to transfer that file from FTP server to application server.
any help. below i am providing my code.
<code>
*& Report demo
report z_demo_ftp.
Variables declaration
data : mi_handle type i,
       pwd       type char30,
       slen      type i,
       key type i value 26101957,
       it_file2 type filetable,
       w_file2 like   line of it_file2,
       l_rc type i,
       v_index type i,
       v_file(30) type c,
       v_path(100) type c,
       v_path_tmp(100) type c.
*Internal table declaration
data: begin of mtab_data occurs 0,
       line(132) type c,
      end of mtab_data.
Selection scree parameters
parameters: p_file type string default 'C:\'.
Get the file path
at selection-screen on value-request for p_file.
data: p_file1 type string.
p_file1 = p_file.
call method cl_gui_frontend_services=>file_open_dialog
    exporting
      default_filename        = p_file1
    changing
      file_table              = it_file2
      rc                      = l_rc
    exceptions
      file_open_dialog_failed = 1
      cntl_error              = 2
      error_no_gui            = 3
      not_supported_by_gui    = 4.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
    read table it_file2 into w_file2 index 1.
    p_file = w_file2-filename.
    clear w_file2.
    refresh it_file2.
    split p_file at '\' into table it_file2.
    describe table it_file2 lines v_index.
    read table it_file2 into w_file2 index v_index.
    concatenate 'put' w_file2-filename into v_file separated by space.
    delete it_file2 index v_index.
    clear w_file2.
    loop at it_file2 into w_file2.
    if sy-tabix = 1.
    v_path = w_file2-filename.
    endif.
    if sy-tabix ge 2.
    concatenate v_path '\' w_file2 into v_path.
    endif.
    endloop.
    concatenate 'lcd' v_path into v_path_tmp separated by space.
endif.
Start of selection
start-of-selection.
pwd = 'file456'.
slen = strlen( pwd ).
call function 'HTTP_SCRAMBLE'
exporting
    source      = pwd
    sourcelen   = slen
    key         = key
importing
    destination = pwd.
Connect to FTP
call function 'FTP_CONNECT'
exporting
    user            = 'client'
    password        = pwd
    host            = 'saturn'
    rfc_destination = 'SAPFTP'
importing
    handle          = mi_handle
exceptions
    not_connected   = 1
    others          = 2.
if sy-subrc = 0.
Excute FTP command
call function 'FTP_COMMAND'
    exporting
      handle        = mi_handle
      command       = 'cd staff
    tables
      data          = mtab_data
    exceptions
      tcpip_error   = 1
      command_error = 2
      data_error    = 3
      others        = 4.
Excute FTP command
      call function 'FTP_COMMAND'
    exporting
      handle        = mi_handle
      command       = v_path_tmp
    tables
      data          = mtab_data
    exceptions
      tcpip_error   = 1
      command_error = 2
      data_error    = 3
      others        = 4.
Excute FTP command
call function 'FTP_COMMAND'
    exporting
      handle        = mi_handle
      command       = v_file
    tables
      data          = mtab_data
    exceptions
      tcpip_error   = 1
      command_error = 2
      data_error    = 3
      others        = 4.
if sy-subrc = 0.
    loop at mtab_data.
      write: / mtab_data.
    endloop.
endif.
endif.
*FTP disconnect
call function 'FTP_DISCONNECT'
exporting
    handle = mi_handle
exceptions
    others = 1.call function 'FTP_DISCONNECT'
exporting
    handle = mi_handle
exceptions
    others = 1.
      end-of-selection.
</code>
so what more code shuld i write.
regards,
kamal

Hi Che Eky ,
                      Actually the above code is for putting the presentation server file to FTP Server.
But now i need to Put the same file present in the FTP server to Application server.
So any help or code which will be helpful.
regards,
kamal

Error files at ftp server

Similar Messages

Maybe you are looking for