ERROR: Final Cut cannot read the file just captured.

I get this message whenever I attempt to capture via DV NTSC using Capture Now.
I have used basic A/V, capture settings.
Please advise.

Perhaps you are capturing to a drive not formatted as Mac OS Extended.
x

Similar Messages

  • Routine FDPREP cannot read the file APXAECTR.rep

    When i tried to generate report from AP, i found this error
    Routine FDPREP cannot read the file /d01/oracle/SVIPROD/apps/apps_st/appl/ap/12.0.0/reports/US/APXAECTR.rep.
    as i checked the specified directory, the file was not there.
    Where to get the file?
    Please advise
    Thanks

    Hi,
    Hi there is no APXAECTR.rdf in the directory, how can i download or install this in my server?I believe I have explained this in my previous reply.
    If you have a backup or any other identical instance, just restore/copy the file.
    If this is the only instance you have, run adadmin and generate the report (select "Generate reports files" option from adadmin).
    For details about adadmin, please refer to:
    Oracle Applications Maintenance Procedures
    http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121admp.pdf
    Thanks,
    Hussein

  • 41810-error creating the menu,cannot read the file

    While creating the menu i am getting the following error
    "41810-error creating the menu,cannot read the file".PLease help to rectify this error.

    It is probably attached to the Forms module (see the library node in the navigator window).
    In a general way, try to know where are youe design modules (*.pll, *.mmb, *.fmb), look at the FORMS_PATH variable to see what directories are part of this environment variable, compile every design time module to get the executable versions *.plx, *.mmx and *.fmx, then put these executable files in one of the directories pointed by the FORMS_PATH variable.
    Francois

  • I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

    I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

    Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
    You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X  or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

  • Error message: "iTunes cannot read the contents of the iPod."

    I wanted to get my dad a new iPod for Xmas and transfer all his music from his ancient Classic. But when I connect to my MacBookPro, I get the error message: "iTunes cannot read the contents of the iPod." I see that 90% of the ipod drive is used, but I don't see any songs listed either on the iPod screen or in iTunes, which is worrying. Is there anything I can to save the music? He will be so upset that it's all gone...

    My suggestions, when Restoring the iPod.
    Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
    Stop the Antivirus program
    Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC.
    Disconnect all other USB devices, except the mouse and keyboard.
    Stop all other programs except iTunes.
    Good Luck!

  • When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?!

    When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?! and then I'd like to erase the original files since the space requirement is huge!!!! Why is upgrading software iPhoto such a pain. I've gotta get a presentation done and all I get for my money is roadblock!!!

    hello, it sounds like the library is damaged.
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 

  • HT3775 I have a video file that is under quick play .mov and my macbook is telling me that it cannot read the file?

    I am trying to record something on my desktop and I recorded it with an application called iscreen recorder lite. I downloaded it off of the application store thinking it would save under a file my computer would recognize. When I tried to play the recording back again, my computer tells me it cannot read the file and I should see if the formatting is right. I checked and the file is under .mov which should be supported by mac. Please help!

    I have this exact same problem, only on Snow Leopard. What's the right answer?
    Thanks, Mark

  • While signing a .XML file a message "cannot read the file for signing" is displayed. What is the solution.

    An official site incometaxindiaefiling.gov.in requires .XML files to be uploaded. When .XML files are uploaded without digital signatures there is no problem. When digital signatures are required for signing the same a message 'CANNOT READ THE FILE FOR SIGNING" is displaced. It happens with CHROME and IE also. The solution which I have devised is that I copy the .XML files in a folder called FAKEPATH in C: drive and pick the file for signing from this folder. The browser allows the file to sign with digital signatures. What is the solution.
    Ashish Goel

    Ashish,
    You might want to submit this feedback at https://incometaxindiaefiling.gov.in/e-Filing/Services/Feedback.html instead.

  • Getting an error message "itunes cannot read the contents of the iphone" ever since I used Sharepod. Do I need to restore back to factory settings?

    Getting an error message "itunes cannot read the contents of the iphone" ever since I used Sharepod. Do I need to restore back to factory s

    Did you every get a fix on this?
    Thanks

  • Using Lightroom 4 w/ Windows 7.  Recently started shooting w/ Sony camera .arw files.  Lightroom cannot read the files.  Loaded Adobe converter program onto the computer and this program cannot read the files either.  Any suggestions?

    Using Lightroom 4 w/ Windows 7.  Recently started shooting w/ Sony camera that shoots .arw files.  Lightroom cannot read the files.  Loaded Adobe converter program onto the computer and this program cannot read the files either.  Any suggestions?

    Thnx again for the reply.  The version of Lightroom I have is 4.0  (working w/Windows 7)  This computer and all media files are kept off-line After doing more research, I downloaded DNG Converter 7.1This loaded into a .zip folder, which I am planning to install into the off-line computer andrun.  Where does this folder go?
    And will this set up work with my version of Lightroom?
    What a pain.  Makes me wanna go back to shooting .nef files for all stills
    Thnx

  • Error Message "Setup cannot copy the file gp.ocx".

    When I try to download Reader X to new Dell laptop running Windows 7 Pro, I get the error message as follows.
    Setup cannot copy the file gp.ocx.  Ensure that the locations specified below is correct, or change it and insert (Unknown) in the drive you specify.
    c:\Users\Bill\AppData\Local\Temp\1DC2.tmp
    Can anyone help me with how to proceed? Thanks.

    Bummer!  I read something about getting this error due to insufficient permissions, but I attempted to install as local admin and didn't work either.  So I just uninstalled Adobe reader from the servers I was having this issue with, at least until a solution is available (?).  I'm not happy, it is not convenient if I have to use another machine to view PDFs, but I'd rather be inconvenienced than have unpatched servers.  Thanks for responding...let's hope Adobe responds...

  • Final Cut X read "The selected SAN location is already in use". Now will not even open. Any advice would be really grateful.

    Initially while working on two projects I began to run out of disk space on the external hard drive. Soon I was given this message:"The selected SAN location is already in use" To try and remedy the situation I decided to move one project to another harddrive that I use for another project. Initially it then showed nothing(projects and events) on either harddrive after that. Now FCX won't even boot up at all. Please help. I'm approching deadlines on all of these projects.
    Thank you for any advise.

    RE : "The selected SAN location is already in use"
    I spent 2 hours with Apple technical support and  even did a remote session as they looked at my desk top live.
    1st the bad news, there is no real solution nor is there an answer as to why this happens. The SAN is supposed to only work through fiber optics and is strictly designed for multiple users accessing the same drives … It should only be activated manually and only through fiber optics . No one at Apple could understand why this is happening, why did my thunderbolt disk appear to be on a SAN and unexplainably unable to be accessed by my computer because it was being accessed by my computer. A conundrum indeed
    The semi good news is that I was able to open the original session eventually.
    Here is the workaround… And it ain't pretty .
    If you can access the disk on the desktop copy the whole content of the disk to another drive , this is because you will have to reformat the drive which is giving you the problems.
    Format the original problematic drive and after you have cleared all of the user preferences for Final Cut X relaunch Final Cut.
    Final Cut should now see the drive without any of the SAN issues.
    Start a new event on the original reformatted drive and give it a somewhat generic name so as not to confuse it with the original event that went bad.
    Reimport into this new fresh event all of the original media ( video/audio/graphic ) files and copy them to the reformatted drive.
    Do not start a new project related to this new event
    Shutdown Final Cut X
    Now go to the drive in which you have copied all of your original files and copy the original problematic Final Cut Projects folder right next to the Final Cut Events folder at the root level of the newly formatted drive.
    The new drive should only have 2 folders in it now, one is the new Final Cut Events folder that you created by copying over all of original media  and the 2nd one should be the Final Cut Projects folder which you just copied back from the backup drive.
    I only had to copy the one project which started giving me problems with the SAN issue, because it was the only FCX on my drive at the time therefore I kept intact the original Final Cut folder hierarchy, theoretically even if you have many different projects inside that Final Cut Projects folder it should work, but if that doesn't work try only copying the problematic Final Cut Project.
    Start Final Cut again and it should read everything except that the media will be off-line ( unlinked ) and you should be able to re-link all of the media if the files had not change names somewhere along the process.
    The one caveat about this is that my edits were off against the music. It almost seems like there was some kind of format issue. Something was lost in translation . My project was only 2 min. long and it had about 50 edits. The 1st three edits were completely off after that it was hard to tell ,some would be on some would be off.
    Now I was going on about 2 hours of sleep so i am a bit blurry but what I am certain is that the 1st few edits were 100% off by at least 60 frames.
    Again this may have just worked in my instance and it may not be applicable every time this problem pops up.
    BTW whenever I connected an older drive everything worked fine there were no SAN issues.
    I am on an iMac 27 inch mid 2011, 3.4 GHz Intel core i7 with 16 GB of RAM
    running Mac OS X version 10.7.4
    and Final Cut X 10.0.4 and
    my drive is a Western Digital my book thunderbolt Duo 4 TB formatted in RAID 0
    as a final note I tried everything I read on every forum before calling Apple.
    Hope this helps someone
    Giorgio
    new root level drive look

  • Windows Vista cannot read the file in my ipod touch

    I am using windows vista and I have 2 separate problems with my ipod touch:
    1. Itune recognizes my ipod and all the songs that are on it but not the photos.
    2. Windows cannot display the files that are on the device. When I go to my computer the ipod is not listed as one of the available drive.
    What am I doing wrong?

    Hi Garry296,
    I'm happy to assist you today, with your problem! Let's take it step by step...
    Garry296 wrote:
    1. Itune recognizes my ipod and all the songs that are on it but not the photos.
    So you mean you can sync music, but not photos? How are you doing it? See if this articles helps you: http://docs.info.apple.com/article.html?path=iTunesMac/7.5/en/789x.html
    Garry296 wrote:
    2. Windows cannot display the files that are on the device. When I go to my computer the ipod is not listed as one of the available drive.
    That's not a problem. It is just like that! iPod Touch and iPhone cannot be used as a Storage drive. Apple removed this feature from this devices.
    Hope this helps!
    !http://signatures.mylivesignature.com/54486/122/A57996D55BE7ABB4A67DE686D381A27 4.png!

  • FCP5: Capture ERROR: "FCP was unable to read movie file just captured"

    Something I've never had trouble before has just happened: I get the following error message when I try to capture DV footage as soon as it has completed the capture: "FCP was unable to read the movie file just captured" It doesn't matter what length the file is.
    I am using a Sony Z1 and have captured hundreds of hours of footage. I tried capturing HDV footage and it works fine. My sequence and capture settings all match what's on tape.
    When I try in iMovie HD, it captures DV fine.
    I checked software update and there's nothing for me right now. The only thing that has changed on my system is updating to OS 10.5.4 along with the Quicktime and iTunes updates. Could that be the problem? But why does iMovie work fine then?
    Any ideas would be mucho appreciado

    Forgot to add, if I capture that same HDV tape but downsample it to DV within the camera, it also does not save the captured file. Thanks

  • After upgrading to MAC OS X 10.10.2 Lightroom 5 has an error that it cannot read the card when trying to import photos.  The card is fine as I can import into iPhoto so any ideas?

    After upgrading to MAC OS X 10.10.2 Lightroom 5 cannot read the card (RAW files , converting to DNG) when importing.  The card is fine as I can import into iPhoto - any ideas?

    It’s usually necessary to trash the prefs after updating OSX to Yosemite. Start by quitting Lightroom 5.
    Launch Finder and click the Go menu whilst holding down the Option (alt) key. Then go to:
    Library >> Preferences
    clear everything relating to LR5 which usually means deleting the following files:
    com.adobe.Lightroom5.plist
    com.adobe.Lightroom5LSSharedFileList.plist
    Then re-launch Lightroom.

Maybe you are looking for