ERROR: FMS Server did not return correctly!

We have several adobe connect HOST meeting rooms. Lately, some users have sent us their complaints arguing:
"Unable to connect - FMS server did not return corrently"
I asked them to send me the test's details.
"App-Server returned: code:ok, servers=rtmp://fmwebserversec:1935/_rtmp://localhost:8506/,rtmpt://fmwebserversec:443/_rt mp://localhost:8506/"
I know, this threat has been post at this forum, but I don't find a solution for my users. The Adobe Connect Support is trying to give a solution, but at the moment, I haven't recieve any solution.
I' ve tried: disconnect firewall, anti-virus,... and they keep unable to connect. (using adobe connect hosted ver 7.5)
Thanks for your advice and help.
Rafael

Obviously this topic creates controversy

Similar Messages

Avoid JDBC sender error: Execute statement did not return a result set

Hi!
My JDBC sender adapter towards MS SQL server works fine, with an Execute statement calling a stored procedure that returns the source data needed. The stored procedure itself updates the status of database table records, so that only the unread records are returned each time the stored procedure is called.
However, the communication channel monitoring sets a red flag for the JDBC sender adapter, when there are no values to fetch from the database table (using the stored procedure). Message says: "Database-level error reported by JDBC driver while executing statement 'EXECUTE FetchMessage 1, 9000'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor."
This is not an error situation, as I do not expect there to be any values to fetch from the database at all times.
I do not see how to change the stored procedure to avoid this error.
Is there a parameter to be set on the JDBC adapter that I can use, so the red flag is avoided?
Thanks for any input!
Regards,
Oeystein Emhjellen

Hi Oeystein Emhjellen.
The problem is Store Procedure that has to generate always a ResultSet (or cursor). If it doesn't have a output, you have to generate an Empty ResultSet.
Like a SELECT Statement:
If there are data, SELECT get an output result but if it get nothing the SELECT Statement get a empty ResultSet.
Ask to your database team.
I hope it helps you.
Bruno.

Error: The resource did not process correctly. How do I get rid of it?

I continue to receive an error everytime I log in to my college student email. The error says The resource did not process correctly. I desperately need help with this problem the error shows this as well java.lang.NullPointerException

Is that with Angel LMS from Blackboard?
That software doesn't seem to work with Firefox 7.
*http://helpdesk.oneonta.edu/xoops/modules/smartsection/item.php?itemid=167

Bizzare error - datasource and getdate not returning correct day of week

Hi,
This is on CFMX 7.0.2,142559.
I have a data source pointing to a MS SQL server. There is a
simple query that access a date off the database and extract the
values of:
-. Current timestamp
-. Day of week
-. First day of week
The query has been running for years and suddenly it gives me
the wrong Day of week and First day of week, but the timestamp is
correct! The result of the calculation for the Day of Week suddenly
became one day ahead, the @@DATEFIRST switched between 6 and 7
(being 7 as the correct value).
Here is the code:
<cfquery name="dte0" datasource="test123"
SELECT getdate() dte, DATEPART(dw, getdate()) dteDW,
@@DATEFIRST dteFirst, @@language LanguageVersion
</cfquery>
<cfdump expand="Yes" label="Query Dump" var="#dte0">
I tried to delete and recreate this data source, restart CF
and flush the cache with no success.
The really bizarre thing is for a few minutes after I restart
CF, it returnes the correct data, but then it suddenly moves one
day ahead - and again, only the Day of week. The DATEFIRST
sometimes returns 6 (instead of the correct value of 7) The
timestamp is ALWAYS correct.
I then created a second data source with exactly the same
parameters and named it "test456" and it works perfectly every
time!!
I am baffled as how this happened and how to fix it.
Does anyone know if somehow the datasource "test123" is
cached somewhere? Appreciate any advice/suggestions/ideas.
Aditya.

> The query has been running for years and suddenly it
gives me the wrong Day of
> week and First day of week, but the timestamp is
correct! The result of the
> calculation for the Day of Week and First day of week
suddenly became one day
> ahead.
>
> Here is the code:
>
> <cfquery name="dte0" datasource="test123"
> SELECT getdate() dte, DATEPART(dw, getdate()) dteDW,
$$DATEFIRST dteFirst,
> @@language LanguageVersion
> </cfquery>
> <cfdump expand="Yes" label="Query Dump"
var="#dte0">
When CF encouters the string within a <cfquery> tag,
all it does is resolve
any CF expressions (there are none in your example), and then
passes the
finalised string to the DB and patiently waits for the DB to
respond, at
which point CF converts the DB-specific result set to a CF
recordset, and
returns it to the calling code. There is very little
involvement on the
part of CF other than that: the DB does most of the work, and
is providing
all the data.
All that said, it does seem weird that one DSN returns one
thing, and
another returns something else. Is your test rig like this:
<cfquery name="dte0" datasource="test123"
SELECT getdate() dte, DATEPART(dw, getdate()) dteDW,
$$DATEFIRST dteFirst,
@@language LanguageVersion
</cfquery>
<cfdump expand="Yes" label="Query Dump" var="#dte0">
<cfquery name="dte0" datasource="test456"
SELECT getdate() dte, DATEPART(dw, getdate()) dteDW,
$$DATEFIRST dteFirst,
@@language LanguageVersion
</cfquery>
<cfdump expand="Yes" label="Query Dump" var="#dte0">
IE: both queries to each DSN within the same CF template,
executed at the
same time.
(note: you have a syntax error in your <cfdump>
statement, so that actually
*isn't* the code you're running, because it would error).
If you run the query via some other client (like Query
Analyser, or SQL
Studio), what do you get? Does it differ from what CF
presents?
Adam

How can I download itunes when I get the following errors...have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up..ituneshelper did not install correctly error 7

How can I download itunes when I get the following errors ..ituneshelper did not install correctly error 7..I .have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up.
This has been a problem for 6 weeks now, I retry when I have time and patience and use my other laptop which is also Windows 7 and runs with no problem.
Every attempt fails when all seems fine on the desktop and I try to log on to Itunes I get the errors.
Any help greatly appreciated.
billymac

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (If this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

External Content Typ: "Connection manager did not return valid connection."

Hi,
I created an external content typ in the sharepoint designer which takes my custom WCF Service as a data source. I sucessfully added all my required operations and created a new list based on the new content typ. At first I had a security issue which I got
resolved by editing my BDC configuration in the Central Administration. Now I face a new issue. When I open my external list the BDC Service gives me the following error message:
"Connection manager did not return valid connection."
Has someone a solution for this kind of message?
Thanks,
Eric

Hi,
   I got the same error "Connection manager did not return valid connection.". In the error log it shows
09/17/2010 12:21:35.28 w3wp.exe (0x13FC)                       0x0F60 Business Connectivity Services Business Data
a5t8 Medium Chose 'PassThrough' auth mode cb34d6ff-663a-4872-9022-21782a7be122
09/17/2010 12:21:35.28 w3wp.exe (0x13FC)                       0x0F60 Business Connectivity Services Business Data
a5uo Medium Initialized WcfSystemUtility for LobSystemInstance with Id '144'. cb34d6ff-663a-4872-9022-21782a7be122
09/17/2010 12:21:35.28 w3wp.exe (0x13FC)                       0x0F60 Business Connectivity Services Business Data
a5up Medium Wcf Service AuthN Mode: PassThrough cb34d6ff-663a-4872-9022-21782a7be122
09/17/2010 12:21:35.28 w3wp.exe (0x13FC)                       0x0F60 Business Connectivity Services Business Data
f8dk Medium Checking for current connection to SystemInstance: NewCustomer cb34d6ff-663a-4872-9022-21782a7be122
09/17/2010 12:21:35.28 w3wp.exe (0x13FC)                       0x0F60 Business Connectivity Services Business Data
a5s9 Medium Creating ClientBase object with type : BCSServiceProxy.WCFCustomerClient cb34d6ff-663a-4872-9022-21782a7be122
09/17/2010 12:21:35.29 w3wp.exe (0x13FC)                       0x0F60 Business Connectivity Services Business Data
a5tz Unexpected System.MissingMethodException: Method not found: 'Void Microsoft.BusinessData.SystemSpecific.Wcf.IBdcClientBase.set_ActAs(Boolean)'.     at Microsoft.SharePoint.BusinessData.SystemSpecific.Wcf.WcfConnectionManager.ConfigureCredentials(Type
clientBaseType, Object clientBase)     at Microsoft.SharePoint.BusinessData.SystemSpecific.Wcf.WcfConnectionManager.CreateClientBase()     at Microsoft.SharePoint.BusinessData.SystemSpecific.Wcf.WcfConnectionManager.GetConnection()
at Microsoft.SharePoint.BusinessData.SystemSpecific.Wcf.WcfSystemUtility.ExecuteStatic(IMethodInstance methodInstance, ILobSystemInstance lobSystemInstance, Object[] args, IExecutionContext context) cb34d6ff-663a-4872-9022-21782a7be122
Can you help me on this?
Thanks in advance
Thybu

Error in iCal: The server did not recognize your user name or password for account "Gmail."

To keep my iCal up to date on two computers, I export an Archive in one and import it to the other. Yes, I know I should use the Cloud, but humour me.
Export of iCal from my MacBook Air (OS 10.7.5) no longer works when imported to my desktop (OS 10.6.8). It returns an error saying "The server did not recognize your user name or password for account “Gmail.” Make sure you enter them correctly."
After dismissing this dialogue box twice (it offers no other options, iCal crashes.
I've turned off the option on my MacBook that asks to use my Gmail account, but since I can no longer launch iCal on my desktop, it can't import new data. How can I clean out the brain of iCal on the desktop so that it will open -- blank -- and perhaps accept a new version of my iCal data?
Thanks,
Bruce

iCal
MobileMe
Apple Support

TS3212 Today, 01/23/2014, I tried updating iTunes, as I got a messsage that update was available. The update did not download correctly the message to uninstall iTunes and reinstall it. After the uninstall and reinstall I got an error message, please hel

Today, 01/23/2014, I tried updating iTunes, as I got a messsage that update was available. The update did not download correctly I got the message to uninstall iTunes and reinstall it. After the uninstall and reinstall I got an error message, that stated: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program fo fix. then I got the message, iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) I have had iTunes since I purchased the iphone in 2012. I have only updated the product since then until today when I did the uninstall ans reinstall as stated in above directions. I am not sure what is different now. please help

I had this problem as well but found the soultion on another post from turingtest2 - it worked for me:
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or by right-clicking the downloaded installer and selectingRun as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I am using iPhoto version 9.6 and I can no longer get an email sent with a photo attached. I get an error message saying the email did not go through because the server did not reply. I can send the photo with Mail. Help!

I have upgraded to Yosemite and also updated the iPhoto application to version 9.6. I am no longer able to send a photo from iPhoto via email. I get an error message saying the server is not responding. But, when using the same server in Mail, I can attach the photo and send it. My wife is using the older version of iPhoto and it works fine.
I have checked the settings for the outgoing server, etc. and the Mail settings match those in iPhoto.
Could this be due to either the Yosemite upgrade or the iPhoto upgrade?

This solution is for those of you using 2-step verification for your Apple ID and are using iCloud as the mail server that you are trying to mail photos with.
I too had this issue. The problem in my case occurred because I had setup 2-step authentication for my Apple ID. If you have done this then you will get the error message "the mail server did not recognize your email/password...". To solve the problem go to:
https://appleid.apple.com
Click "Manage Your Apple ID"
Verify your identity with the device you selected (if this step does not show up then you have not likely set up 2-step authentication and this is not your solution)
Click Password and Security in the left column
Click Generate an app-specific password
Enter iPhoto as the name of the app
Copy the password and paste this into the password box in iPhoto where you would normally enter your apple ID (in the mail account section in iPhoto preferences).
And...voila' (I hope)

I have tried to download ITunes 11on Windows 7 but I keep getting error message 5 telling me it did not install correctly and to install again. Can anyone help?

I have tried to download ITunes 11on Windows 7 but I keep getting error message 5 telling me it did not install correctly and to install again. Can anyone help?

HI there,
I would recommend taking a look at the troubleshooting steps found in the artilce below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W

BC Ecommerce SOAP Error: Server did not recognize the value of HTTP Header SOAPAction

I am trying to add a product to an ecommerce site with this soap action: Product_UpdateInsert
I have followed this very brief instruction: https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx?op=Product_UpdateInsert
I have a html page in a secure area with a jQuery ajax soap script.
I get the this error when I run the script:
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><faultcode>soap:Client</faultcode><faultstring>Server did not recognize the value of HTTP Header SOAPAction: https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice/Product_UpdateInsert.</faultstring><detail /></soap:Fault></soap:Body></soap:Envelope>
I have also tried to add a header with the Soap action with the beforeSend in the ajax call.
This must have been solved before I suppose?
Here is my script:
<!DOCTYPE html>
<html lang="en">
<head>
<title>Test SOAP Request</title>
    <script type="text/javascript" src="//code.jquery.com/jquery-1.10.2.min.js"></script>
    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/jquery-cookie/1.3.1/jquery.cookie.min.js"></script>
    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/underscore.js/1.5.1/underscore-min.js"></script>
    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/backbone.js/1.0.0/backbone-min.js"></script>
    <script type="text/javascript" src="//cdn.worldsecuresystems.com/bcapi/bcapi-0.0.1.min.js"></script>
</head>
<body>
<script>
var wsUrl = "https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx";
var soapRequest =
'<?xml version="1.0" encoding="utf-8"?> \
<soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope"> \
<soap12:Body> \
    <Product_UpdateInsert xmlns="https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice"> \
      <username>myEmailAdress</username> \
      <password>mySecretPassw</password> \
      <siteId>1894001</siteId> \
      <productList> \
        <Products> \
          <productCode>ZJAWEyuuyN</productCode> \
          <productName>My test product</productName> \
          <description>Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.</description> \
          <smallImage>/images/product1/small.jpg</smallImage> \
          <largeImage>/images/product1/large.jpg</largeImage> \
         <cataloguesArray> \
             <string>/Store/</string> \
          </cataloguesArray> \
          <pricesSaleArray> \
            <string>US/19.95,3/17.96,7/16.96</string> \
          </pricesSaleArray> \
          <pricesRetailArray> \
            <string>US/20,5/19,8/20</string> \
          </pricesRetailArray> \
          <pricesWholesaleArray> \
            <string>US/20,5/19,8/20</string> \
          </pricesWholesaleArray> \
          <wholesaleTaxCodeArray> \
            <string>US/0.00</string> \
          </wholesaleTaxCodeArray> \
          <taxCodeArray> \
            <string>GB/VAT</string> \
          </taxCodeArray> \
          <groupProducts> \
            <string>580H0036BL</string> \
            <string>ACAI60</string> \
            <string>ABC-123</string> \
          </groupProducts> \
          <groupProductsDescriptions> \
            <string>Lorem ipsum dolor sit amet</string> \
            <string>consectetur adipisicing elit</string> \
          </groupProductsDescriptions> \
          <supplierEntityId>1234</supplierEntityId> \
          <supplierCommission>0</supplierCommission> \
          <weight>30</weight> \
          <tags>NEW!</tags> \
          <unitType>string</unitType> \
          <minUnits>0</minUnits> \
          <maxUnits>2</maxUnits> \
          <inStock>43</inStock> \
          <onOrder>3</onOrder> \
          <reOrder>2</reOrder> \
          <inventoryControl>true</inventoryControl> \
          <canPreOrder>true</canPreOrder> \
          <custom1>Text in custom field 1</custom1> \
          <custom2>Text in custom field 2</custom2> \
          <custom3>Text in custom field 3</custom3> \
          <custom4>Text in custom field 4</custom4> \
          <popletImages>/images/image1.jpg;/images/image2.jpg;</popletImages> \
          <enabled>true</enabled> \
          <deleted>false</deleted> \
          <captureDetails>true</captureDetails> \
          <downloadLimitCount>20</downloadLimitCount> \
          <limitDownloadsToIP>0</limitDownloadsToIP> \
          <isOnSale>true</isOnSale> \
          <hideIfNoStock>true</hideIfNoStock> \
          <productAttributes>Size*|5|Y:L||UK/2|US/20,S||UK/1|US/10</productAttributes> \
          <isGiftVoucher>false</isGiftVoucher> \
          <enableDropShipping>true</enableDropShipping> \
          <productWeight>0</productWeight> \
          <productWidth>0</productWidth> \
          <productHeight>0</productHeight> \
          <productDepth>0</productDepth> \
          <excludeFromSearch>false</excludeFromSearch> \
          <productTitle>My product title</productTitle> \
          <cycletypeId>3</cycletypeId> \
          <cycletypeCount>-1</cycletypeCount> \
          <slug>my-product</slug> \
          <hasVariations>true</hasVariations> \
          <variations> \
            <ProductVariation xsi:nil="true" /> \
            <ProductVariation xsi:nil="true" /> \
          </variations> \
        </Products> \
      </productList> \
    </Product_UpdateInsert> \
</soap12:Body> \
</soap12:Envelope>';
$.ajax({
     type: "POST",
     beforeSend: function(xhr){xhr.setRequestHeader('SOAPAction', 'https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice/Product_UpdateInsert');},
     url: wsUrl,
     contentType: "text/xml",
     dataType: "xml",
     data: soapRequest,
     success: processSuccess,
     error: processError
function processSuccess(data, status, req)
   if (status == "success")
   alert("Success!");
function processError(data, status, req)
   alert("Failed!");
   alert(req.responseText + " " + status);
</script>
</body>
</html>

This line is a target namespace so it should not be changed: <Product_Retrieve xmlns="http://tempuri.org/CatalystDeveloperService/CatalystEcommerceWebservice"> It is very easy to think that it's a placeholder and that it should be replaced with your own url, which it should not and which will fail.
This works now:
<!DOCTYPE html>
<html lang="en">
    <head>
        <title>Test 7 SOAP Request</title>
        <script type="text/javascript" src="//code.jquery.com/jquery-1.10.2.min.js"></script>
    </head>
    <body>
        <script>
            var SoapMessage = '<?xml version="1.0" encoding="utf-8"?> \
<soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope"> \
<soap12:Body> \
<Product_Retrieve xmlns="http://tempuri.org/CatalystDeveloperService/CatalystEcommerceWebservice"> \
<username>Your Email</username> \
<password>Your password</password> \
<siteId>1894001</siteId> \
<productCode>HHKDKXS5MB</productCode> \
            </Product_Retrieve> \
            </soap12:Body> \
            </soap12:Envelope>';
            var url = "https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx";
            $.support.cors = true;
            $.ajax({
                type: "POST",
                url: url,
                data: SoapMessage,
                dataType: "xml",
                processData: true,
                contentType: "text/xml; charset=\"utf-8\"",
                success: function (msg) {
                    alert("suc: " + msg);
                error: function (msg) {
                    alert("Failed: " + msg);
        </script>
    </body>
</html>

ICal error "server did not recognize your user name"

I recently was added to the MobileMe calendar beta, and now my iCal calendar doesn't sync with MobileMe. iPhone works fine. Error message when I launch iCal says "server did not recognize your user name"
Any thoughts, suggestions would be appreciated.

iCal/Preferences/Accounts/Password

Getting error System.Web.Services.Protocols.SoapException: Server did not r

I am trying to acces my web service using this code
Call call = new Call ();
SOAPMappingRegistry soap = new SOAPMappingRegistry();
call.setTargetObjectURI ("http://tempuri.org/");
call.setMethodName ("EarnNValue");
Vector params = new Vector ();
params.addElement (new Parameter("customer_id", String.class, "gauravbehl",Constants.NS_URI_SOAP_ENC));
params.addElement (new Parameter("channel_id", String.class, "C0002",Constants.NS_URI_SOAP_ENC));
call.setParams (params);
Response resp = call.invoke(new URL("http://203.199.76.2/api/earnnvalue.asmx"), "http://tempuri.org//EarnNValue") ;
if (resp.generatedFault ())
Fault fault = resp.getFault ();
System.out.println (" Fault Code = " + fault.getFaultCode ());
System.out.println (" Fault String = " + fault.getFaultString ());
else
Parameter result = resp.getReturnValue ();
System.out.println (result.getValue ());
out.println (result.getValue ());
and i am getting the the following error
Fault Code = soap:Client
Fault String = System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: http://tempuri.org//EarnNValue.
at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest()
at System.Web.Services.Protocols.SoapServerProtocol.Initialize()
at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)
Please help.
Thanx
GB

<%@ page language="java" import="java.util.*, java.io.*, javax.mail.*, java.net.*, org.apache.soap.util.xml.*, org.apache.soap.encoding.soapenc.BeanSerializer, org.apache.soap.encoding.*,org.apache.soap.*, org.apache.soap.rpc.*"%>
<%
try
out.println ("Starting");
System.out.println("heree");
Call call = new Call ();
System.out.println("here");
SOAPMappingRegistry soap = new SOAPMappingRegistry();
call.setTargetObjectURI ("http://tempuri.org/");
call.setMethodName ("EarnNValue");
call.setEncodingStyleURI("http://schemas.xmlsoap.org/soap/encoding/");
Vector params = new Vector ();
params.addElement (new Parameter("customer_id", String.class, "gauravbehl",Constants.NS_URI_SOAP_ENC));
params.addElement (new Parameter("channel_id", String.class, "C0002",Constants.NS_URI_SOAP_ENC));
params.addElement (new Parameter("category_id", String.class, "club",Constants.NS_URI_SOAP_ENC));
params.addElement (new Parameter("transaction_date", String.class, "16/07/04 14:41:20",Constants.NS_URI_SOAP_ENC));
params.addElement (new Parameter("parameter_id", String.class, "login",Constants.NS_URI_SOAP_ENC));
params.addElement (new Parameter("parameter_value", String.class, "1",Constants.NS_URI_SOAP_ENC));
call.setParams (params);
Response resp = call.invoke(new URL("http://203.199.76.2/api/earnnvalue.asmx"), "http://tempuri.org//EarnNValue") ;
if (resp.generatedFault ())
Fault fault = resp.getFault ();
System.out.println ("Something is wrong");
System.out.println (" Fault Code = " + fault.getFaultCode ());
System.out.println (" Fault String = " + fault.getFaultString ());
else
Parameter result = resp.getReturnValue ();
System.out.println (result.getValue ());
out.println (result.getValue ());
catch (Exception e)
System.out.println ("********Exception*******");
System.out.println (e);
out.println ("Ending");
%>

I get this error message when I try to email photos using iPhoto: Your email did not go through because the server did not reply.

I get this error message when I try to email photos using iPhoto: Your email did not go through because the server did not reply. How can I get this to work when my internet is connected?

Are you able to email from Mail with those two accounts? If so:
1 - go to iPhoto's Accounts preference pane and delete both accounts. Now add them back and try again.
2 - a better solution IMO is to set Mail as the email client for iPhoto is iPhoto's General preference pane. This gives you better access to your contacts, a sent copy of all emails and, if you want a layout similar to iPhoto's, photo layouts located in Mail's stationary.

Itunes did not install correctly. windows error 126

After being prompted to update to the latest version of iTunes, I did so. After the download I was given the following message: itunes did not install correctly error 7 windows error 126 - please attempt to re-install. I have attempted uninstall and deleting the software followed by new download and re-install. Same results each time. Please suggest a fix for this issue. Thank you.

Hi dchamp,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden

ERROR: FMS Server did not return correctly!

Similar Messages

Maybe you are looking for