Error font capture acrodist.exe starting Distiller

Adobe Acrobat 9 Standart Vers. 9.1.0
I can not create PDF get the error message more Error " font capture acrodist.exe starting Distiller"
I have Adobe deinstalled and reinstalled no solution.

Hallo *
registry key

Similar Messages

Font Capture: PhotoShopServer.exe error - Application Error

I recently installed Premiere Elements 10 and, after a couple of days, I get the following error on OS boot:
Font Capture: PhotoShopServer.exe - Application Error
The instruction at "0x103ed4b3" referenced memory at "0x00000a74". The memory could not be "read".
PE _seems_ to work, but does some strange things from time to time. I need to correct this error, and hope it resolves the strange PE behavior. I've seen other postings of the same error in PhotoShop and Encore forums with no resolution. Certainly someone at Adobe must know what causes this. Thoughts, anyone?
Running XP Pro 32 bit with SP3 on Dual Core 2.2GHz with 3GB RAM available.
Thanks for your suggestions!

Well we're all ordinary users here, so although occasionally an employee may post you cannot guarantee it. Your best bet is to contact Adobe Support using the buttons at the top of the page.
There are however some basics that you should look at first: PrE Hanging, or Crashing - Some Tips. If you need additional help then the following article will list the type of information we need: Got a Problem? How to Get Started
Cheers,
Neale
Insanity is hereditary, you get it from your children

Font Capture: PhotoshopServer.exe - Application Error (PSE 10) Any suggestions?

Font Capture: PhotoshopServer.exe - Application Error (PSE 10) Any suggestions?

First, go to Windows Update and select the Custom option so that you can install ALL of the latest updates -- including the non-critical ones. This will ensure you also have important updated drivers and software updates.
Then, for good measure, I recommend running Advanced System Care Free on your system to give it a good tune-up. An XP computer is between 5 and 12 years old, and that's a lot of time to gather up a lot of junk and temp files.
http://www.iobit.com/advancedsystemcareper.html
And of course ensure you have the latest version of Quicktime from Apple.com, per the program's requirements. And then go to the Help menu of any Adobe product and Check for Updates.
Then reboot.
If that doesn't fix it, it sounds like you may have a corrupted font. But that may take some troubleshooting to determine.

Font Capture: Illustrator.exe - エントリポイントが見つかりません

起動時にメッセージが出て起動しなくなりました。
【エラーメッセージ】
Font Capture: Illustrator.exe - エントリポイントが見つかりません
プロシージャエントリポイント ?DrawImage@SurfaceInterface@drawbot@dvaui@@QEAAXAEBUImageInterface@23@AEBV?$PointT@M@geom @dvacore@@M@Z がダイナミックリンクライブラリ dvaui.dll から見つかりませんでした。
OK
その後
「必要なプラグインが見つかりません。」
Expands
と出て、起動しません。
【環境】
windows7
Illustrator CS6 マスターコレクション
解決策をご存知でしたら教えて頂けるでしょうか。
よろしくお願いします。

考えられる原因として、Illustratorの一部プログラムファイルが破損しているか、
インストールされたフォントが正常に読み込みできないかのいずれかが考えられます。
前者の場合はIllustratorの再インストールが必要です。
後者の場合は最近入れたフォントがあれば、それを削除してみることになります。

Error font capture when start Flash CS5

I can't start Flash CS5, because this Error Message :
I dont's know about it, and try Reinstall 3 times but this error alwas appear.
I would be grateful if someone out there knows an answer to this or have a contact email for adobe support that i can email them direct.
Thanks in advance.
About my pc:
SYS: WIN XP
MEM : 2GB
VGA : 1G
FONTS : 898

Thanks kglad and i found an Instructions on eHow
"Instructions
    Windows XP and Vista
    1. Open the fonts folder on your computer. On Windows computers it is located in the "Windows" folder on your "C" drive.
    2. Right-click the folder to select "Details" from the "View" menu, if details are not already showing.
    3. Scan the "Size" column with your eyes for fonts with a "0" size, which indicates a corrupt file. You can delete these fonts and reinstall, if you desire.
Is this an righ Instructions for Find Corrupt Fonts.
Thanks in advance.

Font Capture: InDesign.exe - Entry Point Not Found

I have had problems loading the CS5 suite with a network user using a mandatory profile.
I have finally get InDesign working for the most part by renaming file extensions on certain plug-ins. However when I try to load the program there is still an error message that appears:
When I hit OK to this message the program still loads OK.
Please advise how to rid of this message. Public.dll is located in Renaming Public.dll to public.dll.old prevents the program from load so it must be an essential file.
Thanks in advance,
Kyle
EDIT:
I have visited the following posts and have not helped but they are near enough the same problems I am having.
http://forums.adobe.com/thread/391755#3692165
http://forums.adobe.com/message/2873262#2873262
I also delete the user I am testing with delprof to stimulate the user logging on a new machine (this means profile cache fixes will not work here but still willing to try).
Message was edited by: Bede Academy

Hi John,
I understand what you are saying with the javascript plugin that is why I got it to work by using version CS4 of the file. I have swapped it back to the CS5 version of the file but a Windows error report appears, in the details "mod name: support for javascript.rpln" for the restricted user with a mandatory profile. Tested with a domain admin however and the program loaded Ok so it would seem that is the problem we are dealing with.
Screenshot of problem below:
InDesign in installed locally onto the computer on the C:\ drive. I have updated with this patch:
http://download.adobe.com/pub/adobe/indesign/win/cs5/AdobeInDesign7_0_3_Patch-All.zip
I have also updated this file:
http://kb2.adobe.com/cps/845/cpsid_84586/attachments/AdobeNotificationsDllFieldReplacement Tool.zipKyle

InCopy CS5 crashes with "Font Capture..." error

I've installed InCopy CS5 on my Windows XP machine but somehow something is going wrong with saving the preferences.
I get an error:
Font Captur: InCopy.exe - Application Error
The instruction at "..." referenced memory at "...". The memory could not be "read".
I've done some searching and found this solution:
1.     Quit InCopy.
2.     Rename the InCopy Defaults file (for example, to InCopy Defaults .old) in the C:\Documents and Settings\[username]\Application Data\Adobe\InCopy\Version 7.0 folder.
3.     Rename the InCopy SavedData file (for example, to InCopy SavedData .old) in the C:\Documents and Settings\[username]\Local Settings\Application Data\Adobe\InCopy\Version 7.0\Caches folder.
4.     Start InCopy. InCopy creates a new preferences file.
But, this is only temporary, and has to be done every time when I want to work with IC.
Is there a permament solution for this problem?

That is a sign that your preference files are becoming corrupt. Something is wrong with your system if this is happening regularly.
Bob

Font Capture Error - Reader will not start

Hello Everyone,
I am currently having an issue with Adobe Reader 9.1 were the application will not run when you try and start reader you get the follow error message:
Font Capture: AcroRd32.exe - Application Error
The instruction at "0x0802fef9" referenced memory at "0x0000000c". The
memory could not be "read".
Click on OK to terminate the program
Click on CANCEL to debug the program
OK Cancel
I found the following information in regards to this error however it didn't solve the issue.
Clear temp file
Clear adobe arc files
check for spyware and virus
uninstall and and reinstall the app
replacing fonts folder in win dir
New profile for the user
If you have any information on this issue please comment solution.

You may want to try and ask in the Reader forum. This one is for Adobe Acrobat. Good luck.

Acrobat Distiller Application Error: acrodist.exe ntdll.dll

Hello All,
When submitting a doc to the distiller I intermittently get the follow error;
Faulting application acrodist.exe, version 8.2.2.217, faulting module ntdll.dll, version 5.2.3790.4455, fault address 0x0001b404.
Can anyone offer an explanaion for what might be causing this?
If you need more info just ask...
Thanks in advance....
Pit.

If this is a question about Distiller, please repost in the Acrobat forum. This forum is concerned with the Distiller SERVER product for Windows. Please include information about your OS, and the source of the postscript file being distilled as well as the job options file you are using when distilling.

Acrodist.exe version 9.0.0.332 application errors

We are running a Windows Server 2003 R2 server and are having trouble with Adobe Distiller. Below is the exact error we have:
Faulting application acrodist.exe, version 9.0.0.332, faulting module ntdll.dll, version 5.2.3790.4455, fault address 0x0001b404.
We are also getting the following. This is showing a information, not an error:
Reporting queued error: faulting application acrodist.exe, version 9.0.0.332, faulting module ntdll.dll, version 5.2.3790.4455, fault address 0x0001b404.
Any ideas?

After some research I found some threads that pointed to fonts being an issue. I changed the following:
Ignore True Type versions of standard PostScript fonts
Do not send fonts to "Adobe PDF"
The issue seems to have been resolved.

Adobe Reader 10.1.2 Font Catpure AcroRd32.exe - Applicaton Error in Windows XP

Hi All,
I installed Adobe Reader 10.1.2 in windows XP, and I will get the below error when I open the pdf file:
Font Capture AcroRd32.exe - Application Error
The instruction at "0X8af9311" referenced memory at "0x8a2f9311". The memory cound not be written"
Even I try to disable the protected mode at startup, I still get the aboe error randomly.
Any advice on this.

Sorry for the confusion. Please try the following steps:
1. Launch Notepad and type in following:
Windows Registry Editor Version 5.00
[-HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe]
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe]
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\OpenWithList]
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\OpenWithProgids]
"exefile"=hex(0):
2. Click on File > Save As
3. In the new dialog that appears:
Select All Files in the Save as type list, and then type C:\Exe.reg in the File name box.
Select Unicode in the Encoding list. Save it and remember the file location.
4. Open My Computer and double click on the C: icon
5. You will see a file by the name of "Exe.reg". Double click on the same and click Yes on any dialog that appears.
6. Once completed, restart the computer and your problem should be resolved.
Ankit

Font Capture Error on launching Illustrator CS3

Hi
When i try to launch Illustrator CS i always get this error and then the program crashes.
FONT CAPTURE:ILLUSTRATOR.EXE - FATAL APPLICATION EXIT
The specified module could not be found. C:\Program Files\Common Files\Adobe\Adobe Version Cue CS3\Client\3.0.0\VersionCue.DLL
i have tried reinstalling many times but i always get this error. Im running Win Vista Ultimate. Can anyone please help as its a pain not being able to run Illustrator. The other program in the suite eg Photoshop and Indesign all work perfectly and the error is just with Illustrator.
thanks

Try the solutions in this document: http://www.adobe.com/go/kb403266

Font Capture application error

I've just bought Adobe CS5 Design Standard, and while Photoshop and Ilustrator have installed perfectly, I get the following error when I try to open InDesign: Font Capture: InDesign.exe - Application Error.
I'm unable to uninstall and reinstall Indesign only, as it seems the entire Creative Suite is a single file in my file manager. Does anyone have advice for me?

Hi Peter
Many thanks for your response. I ended up on the phone to Adobe tech
support, and eventually (hours later) it seemed that all the InDesign
plugins on the disk I bought were faulty, so new plugins were downloaded to
replace the old ones, and now my InDesign is working.
I'm not sure if this is something that might affect all CS5 InDesign users
though.
Thanks again for your willingness to provide assistance, but the good news
is that the problem has been sorted out.

Font Capure: Acrobat.exe system error

Font Capture: Acrobat.exe System Error.
My Acrobat XI Pro will not open a document after a Malware attack. I get the "api-ms-win-downlevel-shell32-i1-1-0.dll" is missing.
I tried to repair by the original download, but did not work,

Sorry, for some reason I can't move this thread, but you should post here:
http://forums.adobe.com/community/acrobat/creating__editing_%26_exporting_pdfs

Error de aplicacion AcroRd32.exe

Buenos días
Desde hace unos días, en varias maquinas se me esta produciendo el siguiente problema con Acrobat Reader 6.0. Tras de tener un pdf abierto unos minutos, me saltan pantallas con 3 tipos de errores y se cierra el reader.
1.- Font Capture: AcroRd32.exe - Error de aplicación: La instrucción en "0x0044df13" hace referencia a la memoria en "0x02a00000". La memoria no se puede "written".
2.- AVToolTipview: AcroRd32.exe - Error de aplicación: La instrucción...
3.- DDE Server Window: AcroRd32.exe - Error de aplicación: La instrucción...
Ha alguien le ha pasado algo parecido?
Gracias por anticipado
Saludos

ivangelion wrote:
pues yo no pued iniciar acrobat 9, ya probe reinstalar luego de desinstalar limpiar el registro y nada. acrord32.exe y reader_sl me dan error 0xc0000034
trata de usar ingles dificl que te respondan asi
i cant start crobat 9, already tried to uninstall clean registry reboot and reinstall but no go, acrord32.exe and reader_sl gives me error 0xc0000034
Estás en un foro en español, respondiendo a un mensaje de hace más de cuatro años. Te sugiero abrir una nueva discusión, con un título descriptivo de tu problema, y una clara identificación de la plataforma, sistema operativo, y programas de los que estás hablando, así como sus versiones. Reader y Acrobat son dos programas diferentes.

Error font capture acrodist.exe starting Distiller

Similar Messages

Maybe you are looking for