Error for faulty schedule items in PO with message no.MEPO001

HI,
We made some Purchase requisition and created one PO with respect to these PR then we deleted all item in PO( because created in wrong order type) and trying to create PO again with other order type and with same existing PR but sustem giving error message of MEPO001, we do not understand if initial PO deleted and all PR not used then why system giving error , please give me some solution , because we can't create other PR, also find attachment for your reference . Same thing we tested in our quality client , its working.
Waiting for your valuable suggestion
Thanks,
Dharmveer

closed

Similar Messages

Error while creating Multiple Items Shopping Cart with Asset Assignment

Hi All,
I am creating Shopping Cart with multiple items for different Assets.
Example: I have Two Assets (Asset A with the budget of $1000 and Asset B with the Budget of $1500) in the back end system.
Asset A assigned to Order 102649996 (value - $1000) and Asset B is assigned to Order 102645121 (Value - $1500).
I am trying to create Shopping Cart with Two Items for Asset A and Asset B (which are available in Back End).
I created First item (001) in the Shopping Cart for Asset A and Value $750.
I copied the First Item Details to Second Item (002) and changed the Asset as B and Value $1000.
When I click on Check tab in Shopping Cart Browser, the SRM System is giving the Error Message like
Item 001 Order 102649996 budget exceeded
Item 002 Order 102649996 budget exceeded
I am getting the above error, only when I copy the first item details to the second item while creating Shopping Cart.
Actually the Budget is not exceeded (Asset A Budget is $1000 - First Item and Asset B Budget is $1500 - Second Item) and SRM system is taking the order 102649996 (which is assigned to the Asset A) for the Second Item 002 also.
Kindly let me know the Solution or Please let me know do we have any OSS note to resolve the issue.
Thanks a lot in advance.
Best Regards,
Sudarsan
Edited by: KOYYA SUDARSANA NAIDU on Aug 18, 2008 8:22 PM
Edited by: KOYYA SUDARSANA NAIDU on Aug 19, 2008 6:29 AM

Hi. It is a "feature" of SRM.
I asked SAP about it and did not get a good response.
If you enter Asset A, it will copy the internal order number from that asset into the cart. You can not see the internal order in the web, but you can see it in BBP_PD.
If you then change the asset to asset B, it will not refresh the internal order number.
This means you get internal order A on asset B.
It happens any time you change asset number, so if you copy a line then change you will get this problem.
We ended up using the BBP_DOC_CHANGE_BADI to RFC into R/3 and update the internal order number.
Regards,
Dave.

LT12 TO confirmation error for multiple line items

Hi Experts,
We recently upgraded to ECC 6 DIMP EP6. We are not able to confirm TO with multiple line items. It is failing with an error message VL 198 that 0 quantity of material is available. We are able to confirm TO line items one by one. This TO is created for a delivery picking request. We tried with a configuration change for the delivery line item category availability check as Y as mentioned in this note 1653018. But still not working fine. Please let me know any relevant SAP note for this issue.
Thanks
Rijil

Please run CO09 and enter material numbers to see the available quantity and see if there is some inconsistency there.
Also check MD04 for those materials to see if there is something wrong there.
If you can you can also post the screens here, if you are not sure about CO09 and MD04 interpretation.

When NOT using icons on the toolbar, side-bar drop-down for additional toolbar items has disappeared with Firefox 4 and accessing these items requires clicking 'Bookmarks', then 'Show all bookmarks' then 'Toolbar'--ugh, what a pain.

On older versions of Firefox, Toolbar links ran across the top of my screen, with a drop-down to the far right which would show additional Toolbar items for which there was not room on the screen.
With Firefox 4, if I'm not using icons (text only), the dedicated Toolbar drop-down is gone and I have to first click 'Bookmarks' to the right of the Toolbar ribbon, then 'Show All Bookmarks', then 'Toolbar' in order to access my additional Toolbar links. Could anyone have made it any harder?
Why doesn't someone just restore the drop-down at the far right of the Toolbar so that all of my Toolbar items (which I prefer to keep separately from the regular Bookmark items, else I would have just plain bookmarked those items in the first place) are readily accessible?

You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden (View > Toolbars > Customize or right-click a toolbar).<br />
If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
You only see the Bookmarks menu button if the Menu bar is hidden.

How to execute 261 goods issue for REM order items other than with MFBF?

Our users are looking for an easy way to post a 261 goods issue for a single component of a repetitive manufacturing order without using the MFBF transaction where they have to deselect all other components of the order.
The ideal situation would be to use a transaction similar to MB1C or MB11 to simply enter the planned REM order, component material id, and its respective quantitiy and then post.
Any information you can provide will be helpful.

Strat,
Thank you for your response but LT01 does not seem to provide the functionality that I am looking for.
To clarify, our users would like to complete a 261 movement for a single component within a particular repetitive manufacturing, without going into the MFBF transaction and having to deselect all of the unnecessary components just to single out one.
So ideally we would like to use the MB1C transaction for a 261 movement. Enter in a REM order, the material id, and the quantity to be issued and simply post a single material. Currently when we attempt to do this with MB1C we receive the error M7162 that our order, which is a product cost collector, cannot be processed with this transaction.
Hope this helps clear it up and thanks again for your response.
- Nick

Error for class in use running wsdlc with packageName

Running wsdlc on a wsdl... Using type=JAXWS. Works fine without a package name... The default will be used from namespace.
However when i specify packageName getting a long stream of errors regarding class collisions for xsd generated classes!
I know that there are multiple imports for same xsd schema in various files, but could not find a solution for this, and seems basic enough to be previously encountered by others.
[wsdlc] [ERROR] A class/interface with the same name "MyClass" is already in use. Use a class customization to resolve this conflict.
thanks,
Stefan

actually looking at the link you sent found the explanation for my initial error!
thanks again!
The way wsdlc/packageName is used between JAX-RPC vs JAX-WS is completely different!!
With second option all classes will end-up with same package name, which is why did not see the collision with first one.
For me the difference looks fairly drastic, surprised there is not an option just to generate the same way...
Here's the actual documentation:
<<
Depending on the type of partial implementation you generate (JAX-WS or JAX-RPC), the Java package name of the generated complex data types differs, as described in the following guidelines:
• For JAX-WS, if you specify the packageName attribute, then all artifacts (Java complex data types, JWS interface, and the JWS interface implementation) are generated into this package. If you want to change the package name of the generated Java complex data types in this case, use the <binding> child element of the wsdlc Ant task to specify a custom binding declarations file. For information about creating a custom binding declarations file, see "Using JAXB Data Binding" in Getting Started With JAX-WS Web Services for Oracle WebLogic Server.
• For JAX-RPC, if you specify the packageName attribute of the wsdlc Ant task, only the generated JWS interface and implementation are in this package. The package name of the generated Java complex data types, however, always corresponds to the XSD Schema type namespace, whether you specify the packageName attribute or not.
>>

DBMS_JOB Not running for the scheduled time, but run with .run fucntion.

Hi all,
I am executing a job every 15 minutes which have to delete the rows created in every 30 minutes.
========================================
Jobs Submitted as -
begin
sys.dbms_job.isubmit(job => 202,what => 'del_test_info_p;',next_date =>sysdate,interval => 'sysdate + 15/1440');
commit;
end;
==================================
Procedure that is running in Job -
CREATE OR REPLACE procedure del_test_info_p is
cnt number;
begin
select count(*) into cnt from test where ((created_at+30/1440)<=systimestamp);
update jobcount set cnt=cnt+1 ;
delete from test where ((created_at+30/1440)<systimestamp);
update jobcount set cnt=cnt+1 ;
commit;
dbms_output.put_line (cnt ||' ROWS DELETED');
end del_test_info_p;
=====================================
PROBLEM - Job is running in every 15 minutes as per user_jobs but rows are not deleteing from the test table whose created time is more then 30 minutes from systimestamp. Even the views are not having logs of any job run.
Checked the queries and run the job Manually using dbms_job.run.. gives correct output and deletes the row.
Please suggest where is the problem and how I can correct it.
With Regards
Amit Nanote

HI All,
I have found solution for this. Dont use Systimestamp in the DML's if using in a job (scheduled).
There is a statement in procedure del_test_info_p
delete from test where ((created_at+30/1440)<systimestamp);
Here usage of systimestamp restricting that procedure to execute.
Create procedure as -
CREATE OR REPLACE procedure del_test_info_p is
tstamp timestamp;
begin
select systimestamp into tstamp from dual;
delete from test where ((created_at+30/1440)<tstamp);
commit;
end del_test_info_p;
Thank You.

RCA:Database Monitoring error for SAP Systems on OS/4000 with DB4

Hello Experts,
We are trying to add ECC systems in DATABASE monitoring(DBACOCKPIT) in RCA workcenter of solman 7.0 ehp1 sp26, the DBSID of the systems are shown as *LOCAL.hence the system is not getting added .This is the case only for system on OS/400 and DB4.
The DBSID in RCA is fetched from SMSY-Which is fetched from SLD->The data supplier in ECC pushing the data to SLD
The DBSID in System(Menu)-Status is showing as LOCAL, hence this DBSID(LOCAL) is reported in SLD->SMSY
any pointers on this?

Hi Nilesh,
Please have a look into below SAP note
1887354 *
[ODBC SQL Server Driver] Associated statement is not prepared
Hope this helps.
Regards,
Deepak Kori

Change Schedule Lines values for Each Item for a Scheduling Agreement ?

Hii
I want to change the Schedule Line Schedule Qty for Each Line item for a
Scheduling Agreement .
I cannot use BAPI_PO_CHANGE as this is for PO only and gives error for
a scheduling agreement.
I am on 4.6c so i SAP does not have BAPI_AGREEMENT_MAINTAIN .
Please help me out on using a BAPI or FM to do this.
Regards
Gaurav

Hi,
isn't the Schedule Line a special case of SALES order that might be changed with a BAPI_SALESORDER_MAINTAIN.... If ther is no BAPI for this in your system, you might create new contracts with reference to existing ones using BAPI_CONTRACT_CREATEFROMDATA.
Regards,
Clemens

QueryError "It is error for context item undefined when using[err:XPDY0002]

Hi,
I a beginner for DB XML with python, below is my script and i have error
"def next(*args): return _dbxml.XmlResults_next(*args)
RuntimeError: Error: It is an error for the context item to be undefined when using it [err:XPDY0002], <query>:1:12" when i executed my scripts. Pls advice. Thank you.
import sys
from dbxml import *
from bsddb3.db import *
class DbXml:
def createEnvironment(self, home):
""" Create DBEnv and initialize XmlManager"""
try:
environment = DBEnv()
environment.open(home, DB_RECOVER|DB_CREATE|DB_INIT_LOCK|
DB_INIT_LOG|DB_INIT_MPOOL|DB_INIT_TXN, 0)
except DBError, exc:
print exc
sys.exit()
try:
mgr = XmlManager(environment, 0)
except XmlException, se:
print se
sys.exit()
return mgr
def closeEnvironment(self):
""" Close DBEnv environment"""
environment = DBEnv()
environment.close()
def createContainer(self, mgr, containerName):
""" Create/open a node container"""
if mgr.existsContainer(containerName) != 0:
mgr.removeContainer(containerName)
try:
return mgr.createContainer(containerName,
DBXML_TRANSACTIONAL|DBXML_ALLOW_VALIDATION,
XmlContainer.NodeContainer)
except XmlException, ex:
print ex
sys.exit()
def putDocument(self, mgr, cont, file, DocName):
""" put xml document in database"""
self.docName = DocName
f = open(file)
q = f.read()
f.close()
try:
# all Container modification operations need XmlUpdateContext
uc = mgr.createUpdateContext()
txn = mgr.createTransaction()
try:
docName = cont.putDocument(txn, self.docName,
q, uc) #, DBXML_GEN_NAME)
txn.commit()
except XmlException, ex:
print ex
txn.abort()
txn = mgr.createTransaction()
doc = cont.getDocument(txn, self.docName)
name = doc.getName()
docContent = doc.getContentAsString()
txn.commit()
print "Document name: ",name,"\nContent: ",docContent
except XmlException, inst:
print inst
if txn:
txn.abort()
def query(self, mgr, cont, queries):
""" Query"""
myQuery = r"collection(" + cont + ")" + "/" + queries
myContainer = mgr.openContainer(cont)
qContext = mgr.createQueryContext()
qContext.setEvaluationType(XmlQueryContext.Lazy)
results = mgr.query(myQuery, qContext)
for value in results:
document = value.asDocument()
name = document.getName()
content = value.asString()
print name, ":", content
if __name__ == "__main__":
dbxml = DbXml()
mgr = dbxml.createEnvironment(".")
cont = dbxml.createContainer(mgr, "test.dbxml")
dbxml.putDocument(mgr, cont, "C:\Documents and Settings\uidc0998\Desktop\\books.xml", "books.xml")
dbxml.query(mgr, "test.dbxml", "bookstore/book/title")
dbxml.closeEnvironment()
Edited by: user10951778 on Mar 31, 2009 5:47 PM

Hi rucong.zhao,
Below is my xml, may i know what type of namespace or what i should put for namespace? Thank you.
<bookstore>
<book category="COOKING">
<title lang="en">Everyday Italian</title>
<author>Giada De Laurentiis</author>
<year>2005</year>
<price>30.00</price>
</book>
<book category="CHILDREN">
<title lang="en">Harry Potter</title>
<author>J K. Rowling</author>
<year>2005</year>
<price>29.99</price>
</book>
<book category="WEB">
<title lang="en">XQuery Kick Start</title>
<author>James McGovern</author>
<author>Per Bothner</author>
<author>Kurt Cagle</author>
<author>James Linn</author>
<author>Vaidyanathan Nagarajan</author>
<year>2003</year>
<price>49.99</price>
</book>
<book category="WEB">
<title lang="en">Learning XML</title>
<author>Erik T. Ray</author>
<year>2003</year>
<price>39.95</price>
</book>
</bookstore>

Error while sending the mail( Database error for ADDR_PERS_COMP_COMM_GE)

Hello guys,
I am facing the error    " Database error for <ADDR_PERS_COMP_COMM_GET> <0> " as a pop-up message.
below is my program.
types: BEGIN OF t_p0002,
        pernr type PERSNO,       "Personnel number
        nachn TYPE PAD_NACHN,    "Last Name
        VORNA TYPE PAD_VORNA,    "First Name
        gbdat TYPE gbdat,        "Date of Birth
      END OF t_p0002.
*******************Data of an object which can be changed**************************************
data   S_maildata type SODOCCHGI1.
*******************Text field length 255: texts***********************************************
data : IT_MAILTXT1 type table of SOLISTI1 , "Internal table will contain texts of mail header
       WA_MAILTXT1 TYPE SOLISTI1,
       IT_MAILTXT2 type table of SOLISTI1 , "Internal table will contain texts of contents in the mail
       WA_MAILTXT2 TYPE SOLISTI1.
*******************Structure of the API Recipient List*****************************************
data : IT_MAILREC type table of SOMLRECI1,
       WA_MAILREC TYPE SOMLRECI1.
DATA : it_pa0002 TYPE TABLE OF t_p0002,
       wa_pa0002 type t_p0002.
data Header_text type c LENGTH 15.
CONSTANTS content_text type c LENGTH 35 VALUE 'Tomorrow is the birthday of'.
*******************Event start of selection***************************************************
start-of-selection.
PERFORM get_birthdate.   " will give birthday details
PERFORM document_details. " will give text and mail details
*&      Form get_birthdate
      text : subroutine to get employee birthdate details
form get_birthdate.
data : l_date like sy-datum.
refresh it_pa0002.
l_date = sy-datum + 1.
SELECT pernr nachn vorna gbdat
    from pa0002
    INTO TABLE it_pa0002
    where gbdat = '19650302'.
ENDFORM.                    "get_birthdate
*&      Form document_details
      text : subroutine to get texts and mail details.
FORM document_details.
CLEAR: Header_text,
          wa_MAILREC.
REFRESH IT_MAILREC.
S_maildata-obj_name = 'Birthday Reminder'.
s_maildata-obj_descr = 'Birthday Reminder'.
s_maildata-obj_langu = sy-langu.
READ TABLE IT_MAILTXT1 INTO WA_MAILTXT1
WITH KEY WA_MAILTXT1-line .
WA_MAILTXT1-line = 'Birthday Reminder'.
append WA_MAILTXT1 TO IT_MAILTXT1.
CLEAR WA_MAILTXT1.
LOOP at it_pa0002 INTO wa_pa0002.
    READ TABLE IT_MAILTXT2 INTO WA_MAILTXT2
     WITH KEY WA_MAILTXT2-line .
    CONCATENATE content_text ' ( ' wa_pa0002-pernr ' ) ' wa_pa0002-nachn wa_pa0002-vorna
    INTO WA_MAILTXT2 SEPARATED BY ' '.
    append WA_MAILTXT2 TO IT_MAILTXT2.
    CLEAR WA_MAILTXT2.
    CLEAR wa_pa0002.
ENDLOOP.
   LOOP AT IT_MAILREC INTO WA_MAILREC.
WA_MAILREC-RECEIVER = 'Any mail id'.
WA_MAILREC-rec_type = 'U'.
append WA_MAILREC TO IT_MAILREC.
   ENDLOOP.
********************Function Mofule:To Send new Document*****************************************
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
EXPORTING
document_data = S_maildata
DOCUMENT_TYPE = 'RAW'
PUT_IN_OUTBOX = ' '
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
tables
OBJECT_HEADER = IT_MAILTXT1
OBJECT_CONTENT = IT_MAILTXT2
CONTENTS_HEX =
OBJECT_PARA =
OBJECT_PARB =
receivers = IT_MAILREC
   EXCEPTIONS
   TOO_MANY_RECEIVERS = 1
   DOCUMENT_NOT_SENT = 2
   DOCUMENT_TYPE_NOT_EXIST = 3
   OPERATION_NO_AUTHORIZATION = 4
   PARAMETER_ERROR = 5
   X_ERROR = 6
   ENQUEUE_ERROR = 7
   OTHERS = 8
IF sy-subrc = 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "document_details
After I pressed the exit button the program is getting terminated but still this mail is comming to sost transaction code.
If I will comment the message code which is after sy-subrc the popup will not come and program will work without any interruption.
Can anybody please solve this problem?

Resolved

Provision that MRP is not be considered for specific line item of Sales Ord

Is their any provision that MRP is not be considered for specific line item of Sales Order in MRP run? (Ex: Planned order is also generated for free/ADC sample quantity entered in Sales order)

Dear
Go to Sales and distribution--> Sales --> Sales Documents -->Schedule Lines --> Assign schedule line categories.
Choose the item category (eg. TAN) which is coming in the sales order and enter CN - No. Mat. Planning in the the manual schedule line category (MSL Ca) for MRP type PD.
This will enable you to choose while creating sales order in the Tab procurement column SL Ca.
Choose CN - No mat.planning for the schedule items which you don;t want MRP.
Regards
Soundar

Error Purchase order item 00010 still contains faulty schedule lines

Hi All,
when reprocessing an inbound IDOC for PO i am getting these errors
1) Purchase order item 00010 still contains faulty schedule lines and
2) No instance of object type PurchaseOrder has been created. External refer.
This error is getting during inbound processing and the status sets to 51.
please help me in solving this
Thanks,
Hari kishore

That ID in Return table is the Message Class of the message you get in return line (check in transaction SE91).
You can build the text as this:
CALL FUNCTION 'MESSAGE_TEXT_BUILD'
       EXPORTING
            msgid               = return-id
            msgnr               = return-number
            msgv1               = return-message_v1
            msgv2               = return-message_v2
            msgv3               = return-message_v3
            msgv4               = return-message_v4
       IMPORTING
            message_text_output = built_msg_text
       EXCEPTIONS
            OTHERS              = 1.
As for the message itself, i don't know what it may be.
Read Schedule lines parameter documentation in SE37, maybe there you have a clue.
Regards
Please reward points if helpful

Error in modifying Schedule Agreement with reference to contract

I have created a Schedule Agreement with reference to a contract manually.The contract is of type MK, while the SA is of type LP.
The contract contains one Material which was successfully added to the SA.
Now I am trying to automate the same using BAPI BAPI_SAG_CHANGE. This causes a short dump in the system -
Runtime Errors       MOVE_CAST_ERROR
Exception              CX_SY_MOVE_CAST_ERROR
Short text              Dynamic type conflict when assigning references
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_MOVE_CAST_ERROR', was not caught in procedure "GET_CREQS" "(METHOD)", nor was it propagated by a RAISING clause. Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated. The reason for the exception is: It was tried to assign a reference to a rereference variable using the
    'CAST' operation ('?=' or 'MOVE ?TO'). However, the current content of the source variable does not fit into the target variable.
    source type: "\FUNCTION-POOL=MEOUT \CLASS=LCL_OUT_ITEM_SA"
    target type: "\FUNCTION-POOL=MEOUT\CLASS=LCL_OUT_ITEM_CON"
Information on where terminated:
    Termination occurred in the ABAP program "SAPLMEOUT" - in "GET_CREQS". The main program was "RS_TESTFRAME_CALL". In the source code you have the termination point in line 105 of the (Include) program "LMEOUTP2F". The termination is caused because exception "CX_SY_MOVE_CAST_ERROR" occurred in procedure "GET_CREQS" "(METHOD)", but it was neither handled locally nor declared in the RAISING clause of its signature. The procedure is in program "SAPLMEOUT "; its source code begins in line 101 of the (Include program "LMEOUTP2F ".
The following data was populated before calling the BAPI:(along with itemx table also)
item-item_no
item-agreement
item-agmt_item
The entire logic consists of updating the contract first with a new line item and then adding a line item in SA with reference to the new item in the contract.
The contract updation is working correctly [BAPI_CONTRACT_CHANGE].

Hi Bahrat,
I am also facing the same issue now. Is this issue resolved for you?
Please send the threads if any.
Can anyone plz respond for the issue?

"No connectivity with the server" error for one document but not the other, in the same document library

We have a number of users all of a sudden getting "No connectivity with the server. The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
just by clicking the link and selecting the "Read Only" option. If they select the "Check Out and Edit" option, they can open the document no problem. One of my customers gets the error on one document but not the other, in
the same document library! The older document (a weekly report) was copied and renamed as per standard procedure. She can read the older document, but not the new one.
It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error. We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
created profile does not experience the error for these people. Renaming the profile back restores all their personal settings but the error reappears. When we copied the old profile's folder structure into the new profile, many of the user settings
were restored (but not all, like Dreamweaver settings) but the error did not appear. We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy. We are rebooting between
logons to make sure all files are unlocked.
The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
2005 SP4. SharePoint is 64bit MOSS 2007 with the latest CU.
We've checked the logs on the client as well as on the server and there aren't any helpful entries. We've also run Process Monitor, also with no helpful entries. We're planning to run something like Fiddler next.
It's not everyone, because there are many people are accessing the SharePoint system and the same files. It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes. One person experiencing
the errors is a Site Collection Admin. That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file. They were able to open it Read Only no problems that day, but the next day, the same
file gave them an error. In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
We've tried lots of things including:
Deleting IE cache
Deleting SharePoint Drafts and webcache folder contents
Running IE without add-ons
Upgrading and Downgrading IE
Uninstalling and re-installing IE
Reinstalling our SSL certs
Repairing Office
Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool
Deleting all HKLM and HKLU Office registry settings
Toggling IE Compatibility Settings
Toggling the IE Automatic Logon option
Toggling the location of checked out files
Adding the site in the trusted sites list
Adding the site to the WebClient\Parameters registry locations
Making sure the WebClient service is started
Rebooting the machine (lol :)
This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing. There aren't
"check out" workarounds for some of those macros.
We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next. Thanks!
-Richard.
PS I think this needs to be in the "General" forum instead?

It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes. It helped tremendously that my own machine was throwing the error. I have scheduled a couple of users to work with me to test the
various fixes, to see which one works best, so the story isn't over yet.
I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done. I made a copy of the profile folder and was using that for awhile,
but then made another copy where I had deleted a lot of content out of it so that the copies would go faster. Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
to get back to work. Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore. The concept was to keep as much as the users profile
in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error. I then tried xcopy, but got the "can't read file" error. Then I tried robocopy, and ran into the "junction" problem.
I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
So the process went as follows:
Reboot and log into the machine as another user
Delete the profile and associated registry key
Reboot and log into the machine as the affected user, creating a new profile, and there is no error
Reboot and log in as the other user
xcopy the contents of the skinned-down backed-up profile to the newly created profile
Reboot and log in as the affected user, and the error occurs
Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring. That was strange, because we've cleaned out the cache folders
before which didn't fix the issue.
So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
One way to do this was to:
Reboot and log in as another user
Rename the c:\users profile folder
Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
Reboot and log in as the affected user, confirm that there is no error
Reboot and log in as the other user
Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
Delete new profile folder, and rename the backup to be the production folder
Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
Reboot and log in as the affected user, confirm that there is no error
We've tried this on a couple machines and it works. I had to run Windows Explorer as Administrator to access the other profile's folders.
We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
We may attempt to script this, but the self-help instructions are only 5 lines long:
Reboot and log into the affected computer with another account
Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
Run Windows Explorer as Administrator
Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
Reboot and log into your normal account, and confirm the error is gone
I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it.

Error for faulty schedule items in PO with message no.MEPO001

Similar Messages

Maybe you are looking for