Error : Form ZFi************* has incorrect page format

Hi guys,
Script: my requirement is to copy standard form and stanadrad prog to zprog and zform. and i want to add extra fields in form. for achiving i changed page format DINA4 Portrait to LETTER Landscape. i developed these things. it working fine in this server ( provided test data in this server).
now problem is they provided data in Test client in diffrent server. for testing purpose i download script by using RSTXSCRP progam and uploaded and i copied porgram also. but when i run the transaction in test client, giving error : error is Form zfi*** has incorrect page format.
please do the needful.
Thanks in Advance,
Raj.

I would check in SE71 to make sure the correct SAPscript layout is there and active.
You can check transaction SPAD. Be sure the LETTER in LANDSCAPE mode is supported for the specific device type assigned to the target printer in the test system.
As a last resort, you can purge the buffer for loaded layout sets with program RSTXDELL.

Similar Messages

Form FI_FAX_COVER_A4 has incorrect page format

I am getting error "form FI_FAX_COVER_A4 has incorrect page format" while executing the payment program RFFOEDI1 in batch mode.
This error message is not consistent. I am not sure how form FI_FAX_COVER_A4 is getting triggered by program RFFOEDI1.
Can any one help me on this issue.

Hi,
there are OSS notes
1. 0.370 FI-AR-AR-G 854148 Faxing correspondence: Cover sheet is always issued 20.06.2005
2. 0.300 FI-AR-AR-C 970870 RFDZIS00_PDF: Sending interest letter by fax or e-mail 26.09.2006
3. 0.300 FI-AR-AR-C 956981 FINT: Sending interest letter by fax or e-mail
They say you must use RFDZIS00_PDF or RFKZIS00_PDF program for this.
I don't know but it smells like customizing - Fax cover for EDI message?
Regards,
Clemens

Smartform form {T_HEADER} has wrong page format

I have a header window that contains a table for column headings just above my main window. Somehow in the process of inserting a column and adjusting the size, I caused the following error to continue each time I attempt to print preview the form:
Form T_HEADER has wrong page format.
I have reviewed the details of the table to verify the width and the total of the line type column widths match. The header window that contains the table also has the same width. I am confused as to why I continue to get this error, but it is keeping me from testing any other changes to the form. I am stuck here.
P.S. I searched this forum for "form has wrong page format" and found one similar post that did not answer my issue.
Thanks in advance.
-PA

hi Phillip,
the easiest thing is that you download your form and upload it here, so I got a chance to import it and have a look at exact the same dataset as you do. OF course, delete all the stuff you don't want to share and is unnecessary to fix this issue.
You can try one thing before, delete the table and create a new one with the same formats. Sometimes the compiler interpret it wrong because... I don't know why, but I realized that just delete helped
~Florian

JHeadstart 10.1.2 (27): Error: form.resetBreadcrumbs has no properties

I have generated master-detail-detail pages (JSP) with a global header. But when I click the link in the header I get a Javascript error saying:
Error: form.resetBreadcrumbs has no properties
Source File: http://10.17.21.128:8988/RBSAbos-context-root/jheadstart/form.js
Line: 1873
It seems a form is not loaded. I have tried to generate the pages with and without the breadcrumbs option but I keep getting this error.
Can someone help me with this?

Paskal,
I cannot reproduce this error. But I think it might be caused by an old version of routerForm.jsp. Can you check that the following line is included in routerForm.jsp:
<input type="hidden" name="resetBreadcrumbs"/>
If it is not, something probably went wrong during your migration from 10.1.2.0 to 10.1.2.1. Make sure you remove all .jsp files from the /common directory (make a backup first), and remove all .jjt files as well. When you then generate again, the 10.1.2.1 version of these files will be copied to your file system.
Steven Davelaar,
JHeadstart Team.

Error ' MEX2 USD has an invalid format' in FM 'AC_DOCUMENT_DIRECT_INPUT'

Hi Friends,
I see the error 'MEX2 USD has an invalid format' in FM 'AC_DOCUMENT_DIRECT_INPUT'.Do you guys have any idea as to why has this error occured.Please let me know.
Is this a config issue ?

can you check the currency key which your passing ..

En-CA Language has incorrect Date Format in SSRS report

When I set the Language on a Report to "en-CA", then dates are formatted as dd/mm/yyyy.
This differs from the OS default format of yyyy-mm-dd for en-CA.
Is there any way to tweak the date format for a specific Language in SSRS?
Please don't say I need to add Format() calls to all of the dates in the reports... What I want to do is just give SSRS the correct date format for "en-CA" and let it do the work of formatting automatically.
[url=http://www.spritehand.com]www.spritehand.com[/url] | [url=http://www.andybeaulieu.com]www.andybeaulieu.com[/url]

Hi Andy,
In Reporting Services, by default, formats for date are determined by the report server language at run time. The report server language is the language of the operating system on which the report server is installed. This language is determined by the regional
settings of the computer.
Generally, the report server language supports for all ten of the SQL Server languages. But the en-CA language is not supported by SQL Server. In this way, the report server uses the mostly closely matched language of the operating system as the language.
For example, the operating system is Canada English. Because Canada English and U.S. English are in the same language family, it chooses the SQL Server language resource that most closely matches Canada English (in this case U.S. English). So the date format
uses en-US format.
Reference:
http://msdn.microsoft.com/en-us/library/ms156493.aspx
Thank you for your understanding.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Need to print form in DINA4 page format, but in form it is specified ANY

Hi all.
There a form which has ANY page format in its basic settings.
But I need to print this form in DINA4 page format manually.
When print the form I am getting a spool. Let me know whether I can change thus to DINA4 format and print the same in DINA4 format on printer?
Please provide inputs.
Thanks a lot.
Bala

Hi,
You can change it but you have to check the windows whiche are defined in that page can fit in the Diana4 if it does not fit you have to adjust the windows size to fit into your required page format.
Thanks,
NN.

Cant print PO - wrong page format

Hi all
I have a smartforms to print PO.
I encounter this problem which some PO cant be print while some other PO can be printed.
Its quite confusing since only some cant be print.
Below is the message:
Form TXT_CONTACT has wrong page format.
Message no. SSFCOMPOSER026
Diagnosis
Form TXT_CONTACT has a different page format than the forms output previously but has been added to the same spool request.
System Response
Form TXT_CONTACT ist not processed.
Procedure
While forms are formatted (FM SSFCOMP_OPEN to FM SSFCOMP_CLOSE), the page format must not be changed. All forms within one spool request must have the same page format.
The first page format used, in this case paper format , is applicable to all subsequent forms.
Please guide me.
Thanks in advance

Hi,
Check the NEXT page's PAGE FORMAT what is used in the smartform and make it the same as that of the FIRST page.
I believe the POs which are not being able to print do spill over into the next pages.
Regards,
Ram

Multiple page format's

Hi ,
Multiple page formats is possible in script's
Regards
Suresh.D

Hi,
Yes..It is possible to display multiple page format..
Create a new form which has a different format...
Then in the print program..follow the steps
OPEN_FORM.
START_FORM with the FIRST PAGE FORMat form
end_form.
START_FORM with the SECOND PAGE FORMat form
end_form.
CLOSE_FORM
Thanks
Naren

Line item has incorrect Dr/Cr indicator for remaining amount

Hi all,
When I tried to clear the vendor payment in T.Code F-44, there are some exchange rate differences.So I used GL account to the difference amount for the automatic posting. And also already defined the GL account in OBA1, under key KDF. But there is no posting rules to be defined. Where the Dr/Cr indicator has be defined?. Because while simulating the document I got the error "Line item has incorrect Dr/Cr indicator for remaining amount"
I need help please.

Hi,
If you have defined the GL in OBA1 - KDF. Now double click on that GL, and assign Exchange Rate Diff a/c as gain and Loss
in Valuation tab page, also define Val Loss 1 and Val Loss 2 and Balance sheet adj. 1 account also.
I hope this found useful to you.
Regards,
jigar

Page formats in script its Urgent

Hello all,
I have created one page format through SPAD.. but its getting error :You have selected a page format YPO_PF for which there is no identical formatting type in the spool.
and i saved with same request no but while i was moving it to testing through scc1 i am getting error
please guide me to create page format....?
thanks
regards
aeda
Edited by: Aeda N on Mar 10, 2008 12:21 PM

Hi,
Although I have never done this before, but I hope the below link from SAP help site may help you.
http://help.sap.com/saphelp_nw70/helpdata/en/d9/4a959551ea11d189570000e829fbbd/content.htm
Regards,
Mayank

What is multiple page format?

hI
can anybbody tell me what does actually means of script doesn't support multiple page foramt & smart form will support Multiple page formats.
Plz tell me in details.
thanks.

Hi,
Scripts also supports multiple page format. You can go to edit and create new page and in layout there is a button for page properties(other attributes). Click it and give next page = page2.
So this led you to have multi page format script.
Example: For 1st page you require 6 variable window and 1 main window. From 2nd page onwards you require only 2 variable windows and bigger main window. So for page 2 select only two variable windows and increase the size of main window. And in command line give command
/: position window.
Hope this will help you.

PDF preview: incorrect page count

Hi there
I've noticed since I've upgraded to CS5 that my PDF previews in Bridge do not always show the correct number of pages. It has happened that a four-page PDF displayed only the first two pages, and a single-page PDF showed up as having two pages (the second page preview being the same as the first).
Any ideas on why this might be happening and how to fix it? I've tried refreshing the display.

> Any ideas on why this might be happening and how to fix it? I've tried
> refreshing the display.
Select a file that has incorrect page numbers, with right mouse click choose purge cache for selection and see if this solves the problem.
If so go to the menu tools/cache/purge cache for folder to refresh the cache for the whole foldercontent.
PS
This is the reply i send using email 4 hours earlier but there seems some delay, it is likely this message will appear a second time when retrieved from the digital labyrinth

A4 - letter page format change

Want to use several SAPscript forms "out of the box." Only change needed is the page format (changing A4 -> letter).
I think the only way to accomplight this is to create Z copies of these forms and change the page format in the copy. However, I want to confirm this. Is there any way to avoid this (perhaps through a printer setting) and just use the standard forms? This would elimnate the need for many custom forms. Anyone know if this is possible ?

There's a discussion of webpage widths in this old thread:
...Note that Apple says: +"Safari on iPhone also sets the viewport width to 980 pixels, *the width of most webpages*."+ And http://www.apple.com appears to use mostly a width of 980 pixels.

Smart Form Error Page format 2 with orientation 1 unknown

I have created smart form with Page Format DINA4 (297x210). While executing the smart form i am getting error as "Page format 2 with orientation 1 unknown".

Same Attributes on each page only Next Page is in increment order.

Error : Form ZFi************* has incorrect page format

Similar Messages

Maybe you are looking for