Error formatting / re-send the book?

Hello, I did a book on the application and sent it to apple review, they sent me a message to correct the formatting, I was checking and saw nothing wrong with the formatting, I wonder if there is some kind of guideline in the program for me to correct this. also want to know how I can re-send the corrected book? as a new book and tell them? or is there a hidden option for it? Thank you all!

See this KB article for instructions.
Michi.

Similar Messages

TS2516 an error occurred uploading my iPhoto Book order. It puts the book together and starts to send but at the very last moment comes up with an error message. but checking the book in iPhoto there are no problems to be found.

an error occurred uploading my iPhoto Book order. It puts the book together and starts to send but at the very last moment comes up with an error message. but checking the book in iPhoto there are no problems to be found.

This user talked to Apple Support personnel and confirms what Larry is suggesting:
crowland1066
Re: book upload fails
Nov 30, 2013 3:02 PM (in response to pablo123)
Just got off the phone with apple support. If the photo book completes the assembly process but fails during the upload process the problem is in their overloaded servers.They just started a free shipping promotion for the holidays which has increased the traffic dramatically. I bought a calendar a week ago and it went right through. I'm going to try again during less peak times.
Happy Holidays

Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything.

Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything. Any work around to fix this?

See this lnk for a fix, it worked for me!
http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

Azure Sql DB Export to Storage Container fails with "An error occurred while sending the request"

I've built a new VM from which I'm running PowerShell scripts to backup my databases. It had worked before on an old server for several months, and worked once on the new server, then I upgraded my Azure PowerShell cmdlets, and haven't been able to
get it to work again. The new version is 0.8.10.1.
Below is my source code, with sensitive stuff replaced with ?'s. When I display the $stctx and $dbctx, they seem to have reasonable values. I added the IP address of the server as an exception to the db firewall, and I've installed SQL Server
Mangement Studio and verified that I can connect to the database. I have a feeling there's something simple I've overlooked.
Here's are both error messages:
Start-AzureSqlDatabaseExport : An error occurred while sending the request.
At C:\Users\Public\PublicCmds\test.ps1:29 char:1
+ Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Start-AzureSqlDatabaseExport], HttpRequestException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Database.Cmdlet.StartAzureSqlDatabaseExport
Start-AzureSqlDatabaseExport : Error while copying content to a stream.
At C:\Users\Public\PublicCmds\test.ps1:29 char:1
+ Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Start-AzureSqlDatabaseExport], HttpRequestException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Database.Cmdlet.StartAzureSqlDatabaseExport
Here is the source code:
param($dbname)
if ($dbname -eq $null) {
write-host "Database code must be specified"
return
$password = "????"| ConvertTo-SecureString -asPlainText -Force
$servercredential = new-object System.Management.Automation.PSCredential("????", $password)
$dbsize = 1
$dbrestorewait = 10
$dbserver = "????"
$stacct = $dbname
$stkey = "????"
$stctx = New-AzureStorageContext -StorageAccountName $stacct -StorageAccountKey $stkey
$dbctx = New-AzureSqlDatabaseServerContext -ServerName $dbserver -Credential $servercredential
$dt = Get-Date
$timestamp = "_" + $dt.Year + "-" + ("{0:D2}" -f $dt.Month) + "-" + ("{0:D2}" -f $dt.Day) + "-" + ("{0:D2}" -f $dt.Hour) + ("{0:D2}" -f $dt.Minute)
$bkupname = $dbname + $timestamp + ".bacpac"
write-host "db context"
$dbctx
write-host "storage context"
$stctx
write-host "Backup $dbname to $bkupname"
Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx -StorageContainerName databasebackup -DatabaseName $dbname -BlobName $bkupname

Hi Brad,
Mentioned script, with appropriate values, works on my system.
I'm able to export an Azure SQL database to blob storage. Am using version 0.8.10.1 of cmdlets, so this the same version mentioned in this problem description.
Can you please try using Add-AzureAccount and check if that helps. This is indicated in a different third-party blog.
http://answers.flyppdevportal.com/categories/azure/azuretroubleshooting.aspx?ID=8aee89fe-430e-45fe-af54-7c8ed3ac60e1%29."http://answers.flyppdevportal.com/categories/azure/azuretroubleshooting.aspx?ID=8aee89fe-430e-45fe-af54-7c8ed3ac60e1
Does it work from a different machine with newly downloaded credentials.
Does it work for a newly created database (so minimal database size).
If above do not work, we may require additional details like RequestID, StorageAccountName, ServerName so an MS ticket may be more appropriate.
Girish Prajwal

After updating to 3.6.10 links in Outlook 2007 no longer open - "An error occurred in sending the command to the application"

After updating to Firefox 3.6.10 this morning, Outlook 2007 can no longer open up links embedded in emails. Normally when you clicked a link it would open up Firefox and send you to the website, but when you click on any link it now says:
General failure. The URL was: [url here]
An error occurred in sending the command to the application.
I don't know what happened. I didn't change any other settings on the computer.
I am running Windows 7 64 Professional, MS Outlook 2007 with latest updates, and Firefox 3.6.10

Please read this article to see if it helps:
https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=542907&comments_offset=20&comments_per_page=20&forumId=1
Also, you might try this first:
https://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

An error occurred while sending the message

I compose a email.When I click the send link ,an error occurs. The error page said "An error occurred while sending the message". Could anybody tell me what's wrong. Thanks.

Hi,
lsnrctl is not not able to start listener running on ports < 1024. Try starting the listener with the tnslsnr tool directly. My recommendation is to start it as root directly, so you don't have to set the s-bit.
<midtier_home>/bin/tnslsnr listener_es -u <uid> -g <grpid> &
Regards
Christian

I changed from IE to Firefox. When I click on a shortcut in an email, I get the message "an error occurred in sending the command to the application" in Outlook. It doesn't stop Firefox opening and going to the site, but is annoying.

I changed from IE to Firefox. When I click on a shortcut in an email, I get the message "an error occurred in sending the command to the application" in Outlook. It doesn't stop Firefox opening and going to the site, but is annoying.

See:
*http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

I'm a bit confused. Since my original camera format was 720/60p, and I converted the footage to Pro Res422 in order to edit in Final Cut Pro 7, should I convert back to a higher quality format before sending the file to DVD Studio Pro?

I'm a bit confused. Since my original camera format was 720/60p, and I converted the footage to Pro Res422 in order to edit in Final Cut Pro 7, should I convert back to a higher quality format before sending the file to DVD Studio Pro? If so, which Compressor codec is best to use in order to preserve the original 720/60p? How do I maintain the highest quality?

No...ProRes is a high quality format. Finishing format. Many TV networks take that as a final deliverable.
BUT...DVDs aren't high definition...they are SD. You cannot make a 720p60 DVD with DVD Studio Pro. Any DVD you make will be SD...720x480. The only HD DVD format out there is BluRay, and for that you need a BluRay burner.
As for making a high quality DVD...using the BEST QUALITY settings in Compressor will work:
#42 - Quick and dirty way to author a DVD
Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
1. Export a QT movie, either a reference file or self contained using current settings.
2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
3. Select the left blue one and hit delete.
4. Now, select the green one, right click on it and select the top option "first play".
5. Now drag your QT from the browser and drop it on top of the green monitor.
6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
THATS ALL!!!
NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.

Upgraded to Ver 8. When I am in Ms Outlook, and I click on a link, I received a message "An error occurred in sending the command to the application." Ffox did disable some Add-ons, so is this the problem?

Prior to the upgrade, with FFox open, I could click on a link in a message in the Ms Outlook 2010 program and then it would open in Ffox.
Now with every click, the full error message states "General failure. The URL was < url listed >. An error occurred in sending the command to the application." After the OK button another message asks "Was this information helpful?"
When click I received a choice of Yes, No, or Cancel with the response going to the Microsoft Customer Experience Improvement center.
It could be a Ms error but it started after the new version of Ffox.

See this lnk for a fix, it worked for me!
http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

Since upgrading to 4.0 I've been receiving irritating messages every time I click through via a link embedded in a document or an email. The message says "An error occurred in sending the command to the application". How can I remove it?

Since upgrading to Firefox 4.0 I've been receiving irritating messages every time I click through via a link embedded in a document or an email. The message says "An error occurred in sending the command to the application". How can I remove it?

Certainly!
This is the module in our eMac 1.42:
1GB PC2700 DDR 333MHz CAS 2.5 184 Pin DIMM
The vendor, Other World Computing, ships to the UK but I suspect the shipping would make it pricy. I also trust this vendor:
Apple G4 eMac 1.42GHz (184 Pin PC2700 DDR DIMMs)
Between the two vendor's description, you should have a good idea of the Specs
PPC Macs do not like hi-density PC RAM. That's why I linked these two; they send the right stuff to Mac users.
Crucial UK is usually cited as good but, like their US counterpart, seldom go against Apple's outdated specs. See:
http://www.crucial.com/uk/store/listparts.aspx?model=eMac%20(1.42GHz)&Cat=RAM
They show the max RAM for your model as 1GB--yesterday's news. However, if you order their offering for a G5 iMac, you get the larger modules. Here is a listing for a 2GB kit (2 x 1GB modules) of the right config:
http://www.crucial.com/uk/store/listparts.aspx?model=iMac%20(G5-1.8GHz%2C%2020-i nch)&Cat=RAM
Hope this didn't muddy the water!
Allan

When i click on a web link in an email, i receive a "general failure" message reading "an error occured in sending the command to the application". this has only started since my upgrade to 5.0

i have an HP Pavilion with Windows 7, Outlook 2007 and Firefox 5.0. since my upgrade to 5.0, i receive the following error message when clicking on a url in an email. message reads:
General failure. The URL was: [here it repeats the URL]. An error occurred in sending the command to the application.
what is the cause? what can be done to correct?
thanks in advance.

I have the same problem after updating to 6.0.2 on Win 7 Pro SP1. Did not have any problems prior to upgrade to 6.0.2. (setting IE as default browser - yuk - allows links to be clicked with no problem)

Error: 'Unable to send the request. Verify the URL ... is valid and the...

Hello,
I'm attempting to connect to Essbase from Visual Studio 2005 with the use of the DataServer component.
I'm using a URL;
http://<myserver>:13080/aps/APS
This URL seems to be valid if I plug it into a browser in that it returns a page listing the following information;
Hyperion Provider Services
Hyperion Provider Services - Release 9.3.1.0.0 Build 168
ESS_ES_HOME: C:\Hyperion\AnalyticProviderServices
domain file: C:\Hyperion\AnalyticProviderServices/data/domain.db
essbase.properties: C:\Hyperion\AnalyticProviderServices/bin/essbase.properties
log console enabled: false
log file enabled: true
log level: WARN
log file name: C:/Hyperion/AnalyticProviderServices/bin/apsserver.log
is trace enabled: false
However, if I try and use this same URL in the DataServer component (using the 'Sign On' task) I'm shown the following error;
'Unable to send the request. Verify the URL "http://<myserver>:13080/aps/APS" is valid and the servlet is running'
So, any suggestions are much appreciated!
Many thanks.

Hi John,
Yes, you're right. I've now installed the habnet server on the machine hosting Essbase and can access it via browser using;
http://<myserver>::22080/EssbaseObjects/Servlet
and this seems to be showing signs of life as it returns the following to the browser;
=============================================================================
Hyperion Habnet Servlet, Release 9.2.0
Copyright 1997-1998, 2001-2006 Hyperion Solutions Corporation. All rights reserved.
Hyperion Essbase Java API version 9.0.2
Configuration:
printXML=false
printRequests=false
connectionTimeout=300000
checkInterval=60000
forceMetadataCaching=false
cacheTimeout=300000
cacheInterval=60000
EDSUrl=http://localhost:11080/eds/EssbaseEnterprise (optional)
defaultEDSServer=localhost
defaultDomain=Essbase
defaultORBType=URL
defaultPort=8080
defaultUseConnectionPool=false
defaultConnectionPerOperation=false
defaultUseCluster=false
defaultConnectionReadOnly=false
netRetryCount=20
netRetryInterval=1000
testing configuration of required Java libraries:
Essbase Java API (ess_japi.jar) *** OLDER VERSION ***
Essbase Java API version detected - 9.0.0
Java memory configuration:
Maximum: 63 (Mb)
Allocated: 31 (Mb)
Free: 28 (Mb)
XML (xerces.jar) is subject to:
Apache Software License, Version 1.1
Copyright (c) 1999-2001.
The Apache Software Foundation.
All rights reserved.
SOAP (soap.jar) is subject to:
Apache Software License, Version 2.0
Copyright (c) 1999-2004.
The Apache Software Foundation.
All rights reserved.
=============================================================================
However.... when I try to connect using the DataServer I'm shown the same error message as beofre except for the change of URL. Can you remember if there were any other settings that needed to be made?
I've also noticed the line above ' EDSUrl=http://localhost:11080/eds/EssbaseEnterprise (optional) ', this says 'the page cannot be displayed' if i try to access it from the habnet machine but I'm really not sure if this is relevant or not.
Many thanks again for your time.
Steve

Error trying to open the book.

When I go to open a new book with Blurb application in InDesign I get a message that says: Error trying to open the book. What can I do about it?

It's the InDesign CC. I have a MacBook Pro. When I try to open a new book on the application Blurb I get a message saying the InDesign can't open it.

TS1424 I have bought a book from iBook and even though my gredit card was charged immediately and the book was downloaded the first 12 chapters are not there! It says there is an error ... and the book starts at chapter 13. What do I do? Where do I compla

I have bought a book from iBook. My credit card was charged and the book was downloaded. There is an error and the first 12 chapters are not there! The book has the prologue and info and then chapter thirteen. How do I get the whole book?

I have bought a book from iBook. My credit card was charged and the book was downloaded. There is an error and the first 12 chapters are not there! The book has the prologue and info and then chapter thirteen. How do I get the whole book?

I used iphotos to create a photobook. I want to send the book to my aunt in the states but it won't allow me to do that. I was just wondering why it won't allow me to put in her address so the book can go directly to her home.

I used iphoto to create a photobook. I want to send this book to my aunt in california but it won't allow me to put in her address. I would like to know how
i can have this book sent directly to her home.

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
iTunes Purchase Problems: How to Report a Problem to iTunes Support
http://tinyurl.com/7tscpa7
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Getting Refunds for your iTunes Store Purchases
http://www.labnol.org/software/itunes-app-store-refunds/13838/
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

Error formatting / re-send the book?

Similar Messages

Maybe you are looking for