Error found at the time of posting of t code : FAGL_FC_VAL

Hi guru,
At the time of posting through said T code,the following errors are coming:
Document no: ERROR 15
Doc Error 015 does not exist in co code 1000 or has been archived.
Due to that error i am unable to post it .
Pl advise.
Regards,
Samar

Hi Gurus,
Kindly advise.
Regards,
Samar

Similar Messages

I am getting the below dump error at the time of posting F-02.

Hi ,
Can any body help on the below issue .
I am getting the below dump error at the time of posting F-02.
Runtime Errors         RAISE_EXCEPTION
Date and Time          26.08.2009 13:12:09
Short text
     Exception condition "WRONG_PARAMETERS" raised.
What happened?
     The current ABAP/4 program encountered an unexpected
     situation.
Error analysis
     A RAISE statement in the program "SAPLGLT2" raised the exception
     condition "WRONG_PARAMETERS".
     Since the exception was not intercepted by a superior
     program, processing was terminated.
     Short description of exception condition:
     For detailed documentation of the exception condition, use
     Transaction SE37 (Function Library). You can take the called
     function module from the display of active calls.
Trigger Location of Runtime Error
     Program                                 SAPLGLT2
     Include                                 LGLT2F07
     Row                                     52
     Module type                             (FUNCTION)Line SourceCde
   22         E_SPLIT+000016(000010) = I_ACCIT-KOSTL .
   23       ENDIF.
   24     ENDIF.
   25     IF NOT i_accit-PRCTR IS INITIAL.
   26       E_SPLIT+000026(000010) = I_ACCIT-PRCTR .
   27     ENDIF.
   28     IF I_BS_FIELDS IS INITIAL.
   29       IF NOT i_accit-PS_PSP_PNR IS INITIAL.
   30         E_SPLIT+000036(000008) = I_ACCIT-PS_PSP_PNR .
   31       ENDIF.
   32     ENDIF.
   33     IF NOT i_accit-SEGMENT IS INITIAL.
   34       E_SPLIT+000044(000010) = I_ACCIT-SEGMENT .
   35     ENDIF.
   36     IF NOT i_accit-PARGB IS INITIAL.
   37       E_PARTNER+000000(000004) = I_ACCIT-PARGB .
   38     ENDIF.
   39     IF NOT i_accit-PPRCTR IS INITIAL.
   40       E_PARTNER+000004(000010) = I_ACCIT-PPRCTR .
   41     ENDIF.
   42     IF NOT i_accit-PSEGMENT IS INITIAL.
   43       E_PARTNER+000014(000010) = I_ACCIT-PSEGMENT .
   44     ENDIF.
   45     E_BALANCE+000000(000004) = I_ACCIT-GSBER .
   46     E_BALANCE+000004(000010) = I_ACCIT-PRCTR .
   47     E_BALANCE+000014(000010) = I_ACCIT-SEGMENT .
   48     E_SPL_PAR+000000(000004) = I_ACCIT-GSBER .
   49     E_SPL_PAR+000004(000010) = I_ACCIT-PRCTR .
   50     E_SPL_PAR+000014(000010) = I_ACCIT-SEGMENT .
   51   ELSE.
>>>>>     RAISE WRONG_PARAMETERS.
   53   ENDIF.

Hello,
I guess, you activated document splitting.
Please refer OSS note below,
Note 1295877 - RAISE_EXCEPTION when navigating to Cust. for doc. splitting
Note 985672 - Subsequently posting FI docs: Runtime error WRONG_PARAMETERS
Regards,
Burak

I d/l your mozilla firefox today and now I get the error 0x80070002 all the time...how do I fix that?

I downloaded mozilla firefox today and now I get the error 0x80070002 all the time, and I cannot use system restore because of it. How do I fix that so that my computer works right again. I was restoring because after I d/l your mozilla today, I lost all of my contacts in my msn email...just been tearing my hair out over this and it is soo darn frustrating. Tell me how to fix this. Marilyn

Hi,
The error is totally unrelated to Firefox. Please see [http://support.microsoft.com/kb/910336 this]. The [http://answers.microsoft.com/en-us Windows OS forum] will also be helpful.
Please also check the downloaded file by right-clicking > Properties > Digital Signatures, which should say '''Mozilla Corporation''' and '''This digital signature is ok''' in '''Details'''. You can download Firefox from a known site like e.g. https://www.mozilla.org/en-US/firefox/new/
You can try to Reset Firefox which would hopefully display the missing features, all (contacts, emails, settings etc.) of which are actually stored at the MSN site and are temporarily displayed by Firefox every time the site is accessed.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

"Errors found during the burning process"

Hello,
I created an iDVD project that includes:
1. 108-minute movie
2. 6-minute movie
3. 3-minute movie
4. 12-minute slide show (3 four-minute slide shows)
The project worked fine in the iDVD Preview. I then attempted to burn the DVD right from iDVD, and after 8 hours of encoding, I got the "Errors found during the burning process" message.
I've read so many posts here with a hundred different possible solutions, but what is the best place to start to try to determine what the errors are and how to fix them?
Following one suggestion, I am now creating a Disk Image first, but if errors still exist with a Disk Image, what do I do then?
I'm working on a Powerbook G4 with the iLife upgrade. Thanks for any advice.
Larry

Larry,
Here's my philosophy on iDVD troubleshooting, largley based upon my experience here at this forum, with heavy doeses of input from Ken Tidwell, Len Goff, Old Toad, F Shippey, with more recent input from SDIllini, Hui Cheng, and Beverly M.......
#0 - always use "Save as Disk Image" instead of burning when troubleshooting iDVD
#1 Try the easy usual suspect fixes first! After all if these don't work you can always try the hard fixes!
Check the list on this download:
http://dvd.kentidwell.com/iDVDUOFAQ2005.pdf
But here are easy solutions IMHO:
Get free space on the startup drive -20GB recommended
Delete the iDVD plist file com.apple.iDVD.plist
Repair Disk Permissions
Clear Cache Files (CacheOutX, TigerCacheCleaner, Onyx)
Do you have 12 bit audio - check your camcorder.......if not 16 bit you will have problems
Fix Chapter Markers-don't put one at the beginning in iMovie (iDVD will do it for you)
Chapter Markers - don't put one at the end.
Chapter Markers - don't put one within 2 secs of a transition
Delete other corrupt preference files (try using Preferential Treatment)
#2 When the easy fixes don't work, you need to divide and conquer. The suspects are your a) your project media, b)your hardware, c)your system/user preferences, d)iDVD.
A good test for a&d is to build a simple test project with other photos/movies/themes/audio and see if you can "save as disk image" the test project. The iDVD4 tutorial project is great if you've ever had iDVD4 installed on your machine. If this works it suggests that iDVD is working OK, and that something in your project is causing the hiccup.
The most common problems in projects are CMs, audio and transitions. One way that sometimes clears them up is to export to full quality DV (or to tape!) and re-import into iDVD. In slideshows, funny JPEGs can bring iDVD down. The only method here is to try different groups to find the bad actor.
OK let's assume that you can't burn (I mean "Save as Disk Image") the test project or the tutorial. This suggest that your hardware/system/iDVD is having problems and your project is probably fine. Then what?
c) Hardware: if you can make a disk image but can't burn it, or it plays badly, then try creating a data DVD - if you can't do that I'd suspect your DVD drive. Try different brands of DVD-R (and I'd stick to -R, not +R nor +RW), I like Verbatim. Next on the suspect list is RAM. iDVD is the best test for RAM known to mackind. Try pulling non-Apple supplied modules and try again.
OK, let's assume you can make data DVDs, but you can't make a good disk image, and you've tried pulling all non-Apple RAM. What next?
Try creating a new user. New users have more limited sets of fonts and all new preference files and caches, not only for iDVD but for everything, and few (if any) third party plug-ins installed.
Finally try reinstalling iDVD.......
If you've done all this, a new system install might be in order, but come here first for advice from others before going that far!
john b

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased?

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

Passing validation(ob28) for particular company code at the time of posting

Hi Gurus,
My business requirement is creation of new company code for recalculation of accrual amount. where in these recalculated amount will be posted to new company code, however we had defined some validation (ob28) for document posting. so my query related to is it possible to pass all the validations for this new company code at the time of posting?
your response will be highly appreciated
Thanks & Regards,
Jamuna

Hi,
My requirement is to create new company code, and whenever the document will be posted during the posting whatever validations has been defined with respective to document posting should be restrict for new company code.
so wheneever business will try to post the document for new company code all the existing validations will be by pass for document posting.
Thanks,
Jamuna

Cess on TDS is not calculating at the time of posting F-47

Dear All,
Cess on TDS is not calculating at the time of F-47 (vendor Down payment Requst)
Mean system is deducting TDS amount only, not deducting Cess amount on TDS . at the time invoice posting Cess & TDS calculating in this company code (1111)
But in other (2222) companycode,system calculating cess on TDS at the time F-47 . both company codes under the same system. if we apply perticular notes on above issue is there any affect to other (2222)company code settings ?
Plse give me advise urgant.
Raja

Hi
In the withholding tax settings Define Withholding Tax Type for Invoice Posting
and Define Withholding Tax Type for Payment Posting for CESS ,check whether you selected in <b>calculation part</b>: tax amount as base for calculation and selected inherit base.
If this is not done system will not calculate the Cess.
Regards
Aravind
Assign points if useful

ERRORS found during the burning process #-34506...any idea what this means?

ERRORS found during the burning process #-34506...any idea what this means?
This one project I want to copy to DVD keeps saying this when I go to burn (that is after nearly 2 hrs of processing). There is nothing wrong with the movie so i don't know why i'm having such a problem burning it. i guess to start i'd need to know what this code means (I couldn't find it in iDVD help).
thanks in advance
Jeremiah

First I'd be certain that I had changed the preferences from best quality to best performance.
Did you follow the chapter rules?
*Make sure no chapter markers are within two seconds of the start or end of the timeline.
*Make sure no chapter markers are within a transition.
*Make sure no chapter markers are within two seconds of the end of a transition.
You may have already done this, but
Quit iDVD. Search for the file named com.apple.iDVD.plist and trash it. (A new one will be created next launch of iDVD.) Or look in: User/Library/Preferences. This may solve project loading errors too. Restart and use Disk Utility to Repair Permissions.
:)Sue

Error at the time of posting goods by using 561 movement type

Hi All
I am getting the following error at the time of doing MB1C tcode..
Fld selectn for mvmt type 561 / acct 10001 differs for Ext. GA amount in LC (023)..
Kindly help..
Rgds,
Pavan.

Hi,
Simply go to OMJJ
Go to movement type 561
Then double click on FIELD SELECTION (from 201)/batch search procedure
Then select your relevant movement and click on DETAIL
Then go to or double click on MATERIALS MANAGEMENT then you will see field Ext. GA amount in LC tickmark to SUPRESS and save
Kapil

Error User not found at the time of new group creating

Dear All,
It's quit urgent i am getting an error while creating the new group in sharepoint
System.ArgumentException: User cannot be found.
at Microsoft.SharePoint.SPList.GetItemById(String strId, Int32 id, String strRootFolder, Boolean cacheRowsetAndId, String strViewFields, Boolean bDatesInUtc)
at Microsoft.SharePoint.SPList.GetItemByIdSelectedFields(Int32 id, String[] fields)
at Microsoft.SharePoint.ApplicationPages.PeoplePage.GetCurrentGroupListItem(String field)
at Microsoft.SharePoint.ApplicationPages.PeoplePage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Just for an update i found another thing the same error arrive when i try to change the following
1) Assign new primary administrator through the specific site collection
2) Assign site collection administrator through site settings
I already test the thing with new web application & site collection in other site collection every thing works fine ?
Please if any one know answer it ASAP
RB

The problem is likely in the user info list on the site collection. Each site collection has its own user info list, and people are added to this with an ID that is unique to that person on that site collection. Go to the following url of your site
collection and check the list.
http://sitecollection/_catalogs/users/detail.aspx
The list of
users of the
site collection _catalogs/users/detail.aspx also
be seen as
/_layouts/people.aspx?MembershipGroupId=0
You can test
whether the
user is
there?
You may also restart the User Profile Services and see id this is resolved.

Trying to save file, but get one of two errors 50% of the time

Here's a breakdown of my issue.
I'm a 3d artist working on some texture files for my models. I'm constantly saving the file to make quick changes and fixes, doing so quite rapidly. So much so I now have actions recorded to cut down on having to go to the directory to save over the older file. Now for the issue. I'll try saving over the file, but then I'll either be giving an error message saying "Could not save a copy as ________ because the file name was not valid" or "Could not save a copy as _________ because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the Properties command in the Windows Explorer to unlock the file".
This is my personal pc so I do have the permissions enabled. If I open up the directory where the file is saved after I get these errors the file is then gone. These errors go away if I wait about 6 seconds in between getting the error to save then it has a better chance of working. That's not all of the time though. Sometimes I have to go in and just save manually, which is a real pain when I have actions recorded. It's almost like the relay between Photoshop and my directory isn't fast enough or something's just internally wrong. I've been dealing with this for a year. 11 months and 29 days too long. Help please!!!

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Error message at the time create new Hierarchy for Cost Centers (OKEON)

Dear Experts,
we have create new company code with reference to old company code. at the time create new Hierarchy for Cost Center with t code OKEON system given the error message "Overlapping intervals or identical values have occurred".
we have already checked the duplicate entry but not found the same.
Please help.
Regards
BK GAIKWAD

the long text to the message is:
Diagnosis
You want to use cost center together with activity type . For this combination, however, no master data record was created in fiscal year . The record is defined in CCA during activity type planning.
System Response
Procedure
1.Create the master data record.
Activity type planning
1.Or, check your entries.
I think you should discuss it with your functional consultant

I have subscribed to convert PDF to Excel and Word, I have followed your instructions and I get an error message all the time.

I have subscribed to convert PDF file to an Excel or Word . I have followed your instructions to do so but I always get an error message. I have chated with one representative who suggested that I wait 24h before I try it again implying that my subscription is in process. the time span has elapsed and when i try it, I still get the error message. HELP ME or REFUND me the money

"an error message" really doesn't tell us much.
[topic moved to ExportPDF forum]

Error while entering the time card

Hi,
while entering the time card,I am getting the error in APPS.PA_OTC_API api.
oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-20020: Pa_Otc_Api ::: ->Validate_Otc_Data->Validate_Process :: Check for quantity being negative. : ORA-06502: PL/SQL: numeric or value error: NULL index table key value
ORA-01403: no data found

Hi
Please clarify where are you entering the time card.
Is it on a form of Preapproved expenditures? Are you using OTL, or any other time application?
Are you are trying to load transactions thru the PA interface?
Dina

Error Showing at the time of Installing new License in the Trial Version

Hi,
At the time of Installation I have given my system id: ABP. when I am trying to install the license and it shows the message below:
This is system "ABP", but there is a license key for system "NSP" in the license key file.
So I have change the license txt file and make SAPSYSTEM=NSP to SAPSYSTEM=ABP
then it shows the message below:
rc of SsfLibVerify: 5 = SSF_API_SIGNER_ERRORS = there are signer errors.
uResult = 27 = SSF_API_SIGNER_NOT_OK/SSF_API_RECIPIENT_NOT_OK = Signature not valid / operation not okay for recipient.
Can anybody give me any solution?
Thanks in advance.

Hi Mahbub,
You need to register ABP on SAP Marketplace with following information to fill in
Installation number
System ID,
System number
Hardware key
Current release
Once registered then it will show up in the list and then generate the license key for ABP.
The license key you have it for NSP might have different hardware key.
If you are trying to install ABP on same machine where NSP was then you might have to reinstall the SAP with NSP and apply the license key. (provided you have same h/w)
Since it is trial version then it will be good if you use same SID as mention for trial i.e. NSP.
Regards,
Pinkle
Edited by: Pinkle Naik on Jul 4, 2011 6:18 AM

Error found at the time of posting of t code : FAGL_FC_VAL

Similar Messages

Maybe you are looking for