Error Freight cost "Copy From"

Hi.....
this is my problem with the SAP 8.81 PL9.
I must create an A/P invoice by copying data from a goods receipt PO. The goods receipt has, in some lines, also the freight costs.
From the invoice, the supplier selected, I click on button "copy from". Through the wizart, the first time, I select all the items and take them all on the invoice.
The freight costs are correct in this case.
If I are not interested to some items, without deleting the lines from the invoice, i click again to "copy from" and from the wizard, this time, I select only the articles of interest.
In this case, the freight costs that are contained in the invoice are wrong and they don't correspond to freight cost inserted in the goods receipt.
Thanks.
missNissm

Hi
HERE IS AN EXAMPLE OF MY SITUATION:
my GRPO have
item1 frigth 2,50u20AC
item2 frigth 3,00u20AC
item3 frigth 0
item4 frigth 2,50u20AC
item5 frigth 0
item6 freigth 0........
In The first step, when I copy all items in the Invoice, i Have:
item1 frigth 2,50u20AC
item2 frigth 3,00u20AC
item3 frigth 0
item4 frigth 2,50u20AC
item5 frigth 0
item6 freigth 0........
It's correct, but......
If I are not interested to some items, without deleting the lines from the invoice, i click again to "copy from" and from the wizard, this time, I select only the articles of interest. I have:
item2 frigth 3,00u20AC
item4 frigth 2,50u20AC
item5 frigth 2,50u20AC
I hope that I explained.
Thanks
missN

Similar Messages

Landed Cost - copy from Good Received PO

Dear Experts,
I have Created a AP/Reserve Invoice and already done its Good Received PO. Unfortunately, the item prices for all the items were wrong. (Thank GOD i have not done the Landed Costs ).
I tried to Copy the Good Received PO to AP Credit Memo, but this option was not available, and was not also able to copy to Goods Return for the same.
I tried the Vice Versa, i.e. went to the Goods Return and "copy from" but i did not find the Good Received PO for that supplier. I also went to the AP Credit Memo and tried "copy from" Good Received PO, but this option did not have the "copy from" Good Received PO in the list.
I came across an alternative solution which was to create Goods Return and then Copy that to AP Credit Memo. I have already done this.
Unfortunately, when i go to Landed Costs and select "copy from" Good Received PO, the OLD (and wrong) Good Received PO also appears in the list. I tried to reconcile the BP in the BP->Internal Reconciliation->Reconciliation, but still the Good Received PO appears in the Landed Costs "copy from" list.
Is there a way in Landed Costs "copy from" Good Received PO i can have the already reconciled BP's Good Received PO not appear in the list?
Any help will be highly appreciated.
Thank you.
regards,
Feroz Dosani.

Dear Dosani,
Firstly, it is normal that you cannot create an ap Credit Note directly from the GRPO. When the user needs to revert a GRPO s/he needs to close it with a Goods Return.
Secondly, what we have to establish now is why you cannot create a goods return PO based on the GRPO even if the GRPO is still open.
Do you receive any error messages? Is the option G. Return grayed out?
Please, give us some more information and we will try to help.
Thank you.
Marcella Rivi
SAP Business One Forums Team

Error message when copying from Acrobat Reader

Error message when copying from Acrobat Reader - any file, any time (Win 7, Adobe many versions until recent).
Copy works, but causes a needless and useless error message that has to be clicked away every time.
This problem is published on the web for a million times without a working solution. And even in the Adobe forum no qualified answer (http://forums.adobe.com/thread/441370)
When can I expect a solution?

"101 Views 0 Replies
Was this helpful?"
Of course not.
But thank you anyway, I talked to my admin and we changed the whole company to Foxit.
It can be that easy.

HP OfficeJet J4680 All-in-One getting Copy error message when copying from front panel.

I get this message when I try to copy from the front panel: Incorrect paper size. Load different media or change copy paper size settings. It does not matter what I am trying to copy. I have checked the paper size and media and they are set on what I want -- Letter size and plain paper. It started after I cleared a paper jam from the back of the copier. Hope someone can help me. Thanks Klb

I am also having the exact same problem. I tried resetting it back to default settings (power on, unplug power cord, hold the # and 3 buttons while plugging back up). However, this has not helped. So far the only solution I saw is to upgrade to another printer, but copying seems to be such a simple function for this problem to be so hard so solve. Unfortunately, I've seen no other answers, so upgrading may be my only option even though I have no other problems :-(

Error whille Order copy from 11i to R12: INV-RSV TARGET ROW EXISTS

Hi Gurus,
I have copied the order from 11i to R12 using OE_ORDER_PUB.process_order api.
Once the order is copied to R12, I am making the changes in 11i and now while the order is copying with the changes to R12 api is failing with the error message,
"A reservation record with the same item, organization, demand souce, and supply source already exists. Please use transfer reservation if you still want to make the changes."
Could you please help me out in resolving this issue.
Appreciate in Advance....

Hi,
I am also same problem while creating the Sales Order.
Did you find any solution for this problem??
Thanks,
-- Eric.

Error message while copying from iTunes to iPod

My daughter's iPod shuffle (1st gen) was not charging so I updated it to the lastest software (1.1.5). While doing so, iTunes required an upgrade as well (7.5). Both are updated. But it is still not charging. That's my first problem.
I decided to see if it was a problem with my computer. So I tried using my other daughter's iPod. It was charging and playing music. While I was at it, she wanted to add new songs. For some reason I had difficulties so I updated her iPod software to 1.1.5 as well.
When I went to put songs on it from iTunes, I get an error message "<song name> was not copied to the iPod "<ipod name>" because it cannot be played on this iPod.
I now have an iPod that has no music on it. (Plus a second iPod that's not charging.) Both iPods are about 15 months old. They are shuffles (1st gen) and we have XP on our computer.
Can anyone help.

Some formats that play in iTunes are not compatible with the 1st generation iPod shuffle, Aiff and Apple Lossless for instance. Apple Lossless is not supported on the 2nd generation shuffle: iPod shuffle: Compatible audio formats
I don't use a shuffle but it has a function that other iPods don't have, on-the-fly conversion, the option to "Convert higher bit rate songs to 128 kbps AAC". You should check this out, this should save you converting your lossless files in iTunes. You can find details on pages 12 and 13 of the manual: iPod shuffle User Guide
Quote: "If this option is selected, songs encoded in AIFF or Apple Lossless format are
converted to 128 kbps when transferred to iPod shuffle (the song files in iTunes aren’t
affected). Otherwise, iPod shuffle doesn’t play songs encoded in those formats"

Copy error -36 when copying from Time Machine disk to Mac

Since using OS X 10.6.(.6), I can't copy certain files from my Time Machine disk to the Mactintosh hard disk without getting a copy error -36. The error doesn't occur with all files: for example pdf files will copy without problems, but Filemaker Pro files and iCal files don't. May be it's important to mention that when I retrieve files from the Time Machine disk, I have to mount the "sparse bundle" with my user files first and then drag the files to the desktop or an other place. This is because I'm running File Vault. If I try to retrieve files that were backed up under OS X 10.5, I get no copying errors at all. So it looks as if Snow Leopard has something to do with it. Is there anybody who has seen this problem before and knows how to solve it?

Ok, I finally was able to complete the Disk Utility Repair, and it says everything is ok. Still the problem in restoring presists.
One thing I noticed is that most files that Time Machine restore chokes on have an added set of permissions added to the file or folder with the same user name as mine, and the permissions level says "Custom". Thus it has 2 sets of permissions defined with the same user name, one with Read/Write and another with the same name that says "Custom." Am I explaining this well? Maybe this is a clue?

Getting error -36 while copying from mac HD to usb HFS+ drive

Hi
first off, id did google this stuff.. but couldn't find a solution. i tried all the dot_clean stuff without result.
i'm running the latest update of snow leopard 10.6.7
so here's the situation:
i've got this 1TB FAT32 usb-drive filled with backups that i wanted to re-format to HFS+ so i could fit files >4GB on it. So i backed up that backups to some other USB drives (HFS+ formatted) and formatted the 1TB to HFS+ using disk utility.
After formatting, I start to refill the newly formatted 1TB HFS+ from the other HFS+ drives...
and always, after copying about 90GB my 1TB starts making noises like it's trying to read/write something to/from the disk. short typical HD-activity sounds quickly following each other. this continues for about 30s and after that i get the error -36.. the disk is then 'unproperly removed'. when i remount the 1TB afterwards, it acts like nothing's happened. the 90 GB of files that were written to it before the crash are still there and readable, a can even create a new folder on the drive but as soon as i try to write say a 1GB file to the drive BANG some stuff.. that horrid -36...
I've already used the dot_clean command on all the folders i backed up from the 1TB, I can't seem to find any .._DSstore files..
I am starting to think this might be a hardware related problem..?
thanks so much in advance
lars

First, check that the USB cables are securely seated at both ends. If possible, use different cables; if not, switch the cables between drives.
Is the 1 TB drive partitioned in GUID format? You determine this by selecting the drive icon (above the volume icon) in Disk Utility, and looking at the bottom of the window for the "Partition Map Scheme." If not, partition it in that format. Erase the HFS volume with the option of writing zeros to it ("Security Options..."). This will cause any bad sectors on the drive to be mapped out. It will take much longer than a simple formatting. Then run Verify or Repair Disk on the other USB drive.
Try the copying operation again. If you still get error -36, then either the enclosure or the mechanism of the 1 TB drive has failed -- almost certainly not both.

Error message while Copying from one External HD to another

Hi all, I am trying to copy my music library to a new external HD from my old one, they are the same drive but one is bigger. My collection is about 300 gb. When I go to copy it it will get a few gigs into the transfer then an error saiy, "-36 error some of the data in a particular file cannot be read or written.
I thought I may have corrupt files so I tried to play the track in itunes, the track crashed about 15 sec in and made itunes frreeze. So I deleted it. I continued to do this for each track that had issues, but It seems like its going to be a long time.
I also got the error message for one track that played perfectly in itunes, so now i dont know what the problem is.
Does anyone know of a program I can use to determine if tracks are corrupt? Or a solution to this issue?
I also went into disk utility and it says both drives are working OK.
I would aprreciate any help, thanks

Use Get Info on both the volumes in question - assuming neither are your system or time machine disks. If there is an option for ignoring ownership - way at the bottom of the Get Info window - select it to cause ownership to be ignored. Try copy again.
I am about 100% sure this might possibly perhaps kind of hopefully help. But it wont hurt either... and I am also assuming you have used disk utility to repair both disks. And if one is a new drive... go ahead and reformat it first.

Error message when copying from Itunes to 3rd gen. Ipod

The message says "Attempting to copy to the disk My Ipod failed. An unknown error occurred. (-69) What does this mean and what do I do about it? Ive restored my Ipod several times, am running the appropriate updated copy of everything. Help!!!

This is the main iTunes support page
http://www.apple.com/support/itunes/index.html
And this is the main iPod support page
http://www.apple.com/support/ipod/
There is a search box over on the right to use.

PLEASE HELP!!! Error - 36 when copying from powerbook to iMac/Lacie HDs

I'm working on a film and have captured to my powerbook G4 in FCP. I am now trying to transfer my scratch disk to either my iMac (intel 2.4GHz) or my Lacie HD extreme 500 GB / Lacie 250 GB.
When I drag the folder over, it starts copying and then at some point (normally about half way through) it says:
"The Finder cannot complete the operation because some data in shot 9 could not be read or written (error cose -36)"
It does this for a number of different files in the folder. I have tried copying them one by one, and a few will copy then I'll get to a file and the same error will occur. The files on the powerbook are intact and open and play as expected. I have tried using my powerbook in TD mode with iMac and linking to both Lacie drives with FW400, FW800 and USB.
I haven't tried copying over my network yet but am reluctant to do this as firstly there is over 30GB of material and secondly I worry about the accuracy of a copy over wifi.
I recently had my logic board replaced on powerbook and have done an erase and install of OSX Leopard and am running 10.5.6 on both machines.
I found very little on these boards about error 36 and so would massively appreciate any help on this - this is my first really important scary project and I have a looming deadline!!!
Cheers

You should use Disk Utility to verify both the source and destination disks. Post the error messages here if you see any.
How is the LaCie formatted? It really should be Mac OS Extended. FAT formatted disks have file size limitations which can cause all kind of problems.

PLEASE HELP!!! Error -36 when copying from powerbook to iMac/Lacie HD

I'm working on a film and have captured to my powerbook G4 in FCP. I am now trying to transfer my scratch disk to either my iMac (intel 2.4GHz) or my Lacie HD extreme 500 GB / Lacie 250 GB.
When I drag the folder over, it starts copying and then at some point (normally about half way through) it says:
"The Finder cannot complete the operation because some data in shot 9 could not be read or written (error cose -36)"
It does this for a number of different files in the folder. I have tried copying them one by one, and a few will copy then I'll get to a file and the same error will occur. The files on the powerbook are intact and open and play as expected. I have tried using my powerbook in TD mode with iMac and linking to both Lacie drives with FW400, FW800 and USB.
I haven't tried copying over my network yet but am reluctant to do this as firstly there is over 30GB of material and secondly I worry about the accuracy of a copy over wifi.
I recently had my logic board replaced on powerbook and have done an erase and install of OSX Leopard and am running 10.5.6 on both machines.
I found very little on these boards about error 36 and so would massively appreciate any help on this - this is my first really important scary project and I have a looming deadline!!!
Cheers

Joey,
A -36 error is an I/O error. My first though would be a bad cable, but you have apparently tried several of these, over several different busses (the buss could also be a culprit). That leaves a potential disk error.
OK, so you captured this footage on the Powerbook. You did this post-format/reinstall, right? You captured this to the Powerbook's internal drive, right? DV footage (or worse, HD footage) uses huge amounts of disk space. How much? How close to completely full is this internal hard drive? If you allowed the available space to approach zero, especially when running something like FCP, this may have caused the disk error.
Assuming you still have some space left on the Powerbook's internal drive, are you able to make an internal copy of one of these "troublesome" files using just the Powerbook in isolation? If not, and where you cannot, you have a corrupted file. Corrupted by a disk error. Yes, you may be able to access them just fine, and they may actually play within FCP, but they are incomplete in some way; they are missing some bytes, Kbytes, or Mbytes. If you find this to be the case, you might consider that you need to re-capture.
If they can be copied internally, there is probably something else going on here. If they can be copied internally, you should be able to copy them to some external media.
Scott

Error Downloading Digital Copy from Purchased Blu-Ray

Having Trouble downloading digital copy of purchased Blu-Ray. I am logged in, have active internet, and i get an error with a -50 code. It says please check that the connection to the network is active. I'm confused

If those films are only in HD in the store then you will only be able to get the HD versions - what options do the films have against them in the store (HD only, HD and SD ?), and (if the SD version is in the store) if you go to the Purchased link Quick Links on the right-had side of the iTunes store homepage on your computer's iTunes do you get the option of downloading an SD version of them ?
The 'sync SD' version setting only works if you have the SD and HD versions in your iTunes library, if you don't then it will only sync what you have i.e. the HD version.

Solar_Project_Admin copy from implementation to maintenance

Dear All,
when we try to copy an implementation project (documents and scripts ecatt) into maintenance one the system (solar_project_admin) gives us an error "You cannot copy from to Maintenance Project
Message no. SOLAR_SPROJECT192". How can we solve and copy an implementation project with all its documents and scripts into maintenance one?
Regards
Bob

Hello Bob:
I think that the right procedure is create first a solution based on your implementation project (there you will copy all of your stuffs), after that creat an empty maintenance project, then every time you need to maintain a node of your solution, you will check it out to your maintenance project.
Hope that helps,
Federico.

WHERE TO FIND Freight cost

Hi Gurus,
I am working on a report .
i need the information of freight cost. from where we can get the exact freight cost for item wise.
Becoz my client is very particular about the freight cost for each item in PO LEVEL and DELIVERY LEVEL and INVOICE LEVEL.
points will be awarded for sure.
REGARDS,
DULI.

Hi Friend,
Freight cost against condition type is store in KONP table, link is condition record no.
So, if it is purchase and frieght cost is maintained at item level, then you will get condition record number in EKPO table against each line item.
For same as delivery it will be in LIPS table.
Link these condtion record number and condition type with KONP table, you will get exact freight value.
Hope it will solve your problem.
Regards
Krishnendu

Error Freight cost "Copy From"

Similar Messages

Maybe you are looking for