Error : FRF-00007 Unable to open RFC connection
Hi All,
I'm installing SAP BW 3.5 for oracle 9.2 and patch 10.1 on AIX 5.3server.
The end of installation 'Starting RFC jobs" i got the error.
Log Details:
ERROR 2008-07-28 19:20:02
FRF-00007 Unable to open RFC connection.
ERROR 2008-07-28 19:20:02
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failedConnect_PM GWHOST=biqci, GWSERV=sapgw00, ASHOST=biqci, SYSNR=00
Can anybody help me to solve this issue
Regards,
M.M Selvakumaar
09739798709
subject changed by moderator!... Read the "Rules of Engagement"
Edited by: Juan Reyes on Jul 28, 2008 4:03 PM
Hi juan,
Thanks for Ur reply
As per ur advice : I checked the path etc/services
Everything is fine there
Then
Solution:
I stopped the sap service and restart the service then I continued the installation without error
After installation I checked T-code: SICK there I got one error
Error Details:
SAP System Check
OS release AIX 3 5 00C5E98B4C00 is not supported with this kernel (640)
Severe problems were detected during initial system check.
Please, do not use that system before fixing these problems.
So please help me to solve the issue
Regards,
MM.selvakumar
Similar Messages
-
SAP R/3 installation - FRF-00007 Unable to open RFC connection
Hi all
I install SAP R/3 Enterprise SR1 with SuSE Linux Enterprise server 9 and SAPDB 7.3.28. At the end of the installation exactly on the " Starting RFC Jobs (post processing" the following problem begins.
<b>in the LOG INSTALLATION PROGRESS</b>
See '/sapmnt/RRP/exe/startsap all DVEBMGS00' output in '/sapinstdb/startsap.log'.
INFO 2006-07-27 16:50:47
'/sapmnt/RRP/exe/startsap all DVEBMGS00' returned with '0'.
PHASE 2006-07-27 16:50:49
Prepare Starting RSWBOINS, RADDBDIF
INFO 2006-07-27 16:50:49
RFC parameter CLIENT was set to value 000.
INFO 2006-07-27 16:50:49
RFC parameter USER was set to value DDIC.
INFO 2006-07-27 16:50:49
RFC parameter LCHECK was set to value 1.
INFO 2006-07-27 16:50:49
RFC parameter PCS was set to value 1.
INFO 2006-07-27 16:50:49
RFC parameter LANG was set to value EN.
INFO 2006-07-27 16:50:49
RFC parameter ASHOST was set to value rpone.
INFO 2006-07-27 16:50:49
RFC parameter SYSNR was set to value 00.
INFO 2006-07-27 16:50:49
RFC connection information checked successfully.
ERROR 2006-07-27 16:50:59
FRF-00007 Unable to open RFC connection.
ERROR 2006-07-27 16:50:59FRF-00063 RFC logon failed with message: Connect to SAP gateway failedConnect_PM GWHOST=rpone, GWSERV=sapgw00, ASHOST=rpone, SYSNR=00
ERROR 2006-07-27 16:50:59
FJS-00012 Error when executing script.
<b>IN THE SHELL - KONSOLE</b>
TRACE [iaxxccntrl.cpp:595]
CController::stepExecuted()
The step StartSAPSystem with key SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPInstancePrepare|ind|ind|ind|ind|ind|0|StartSAPSystem|ind|ind|ind|ind|ind|0|StartSAPSystem has been executed successfully.
TRACE [iaxxejsexp.cpp:138]
EJS_Installer::writeTraceToLogBook()
t_SAPComponent_SAPSystemLogon_SHARED.insertRow(), inserting
TRACE [iaxxccntrl.cpp:595]
CController::stepExecuted()
The step sCopytSAPSystemsLogon with key SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Rfc_Jobs|ind|ind|ind|ind|ind|0|sCopytSAPSystemsLogon has been executed successfully.
PHASE 2006-07-27 16:50:49 [iaxxccolwk.cpp:328]
CCheckCollectingWalker::printPhaseInfo()
Prepare Starting RSWBOINS, RADDBDIF
TRACE [iaxxclib.cpp:56]
load()
Opened iamodrfc.so
TRACE [iaxxejsexp.cpp:138]
EJS_Installer::writeTraceToLogBook()
Connect to SAP gateway failed
Connect_PM GWHOST=rpone, GWSERV=sapgw00, ASHOST=rpone, SYSNR=00
LOCATION CPIC (TCP/IP) on local host
ERROR connection to partner broken
TIME Thu Jul 27 16:50:59 2006
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -6
MODULE niuxi_mt.c
LINE 1237
DETAIL NiPRead (0.0.0.0/0)
SYSTEM CALL recv
ERRNO 104
ERRNO TEXT Connection reset by peer
COUNTER 3
Transaction begin ********************************************************
TRACE [iaxxbrfc.cpp:119]
CIaRfc::CIaRfc
Instance for SAP system module was created.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT was set to value 000.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER was set to value DDIC.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK was set to value 1.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS was set to value 1.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG was set to value EN.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST was set to value rpone.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR was set to value 00.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:571]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
ERROR 2006-07-27 16:50:59 [iaxxrfcimp.cpp:481]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE [iaxxrfcimp.cpp:482]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE [iaxxrfcimp.cpp:485]
CAbRfcImpl::openRfcConn
Connect to SAP gateway failed
Connect_PM GWHOST=rpone, GWSERV=sapgw00, ASHOST=rpone, SYSNR=00
LOCATION CPIC (TCP/IP) on local host
ERROR connection to partner broken
TIME Thu Jul 27 16:50:59 2006
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -6
MODULE niuxi_mt.c
LINE 1237
DETAIL NiPRead (0.0.0.0/0)
SYSTEM CALL recv
ERRNO 104
ERRNO TEXT Connection reset by peer
COUNTER 3
ERROR 2006-07-27 16:50:59
CJSlibModule::writeLogEntry()
FRF-00063 RFC logon failed with message: Connect to SAP gateway failed
Connect_PM GWHOST=rpone, GWSERV=sapgw00, ASHOST=rpone, SYSNR=00
LOCATION CPIC (TCP/IP) on local host
ERROR connection to partner broken
TIME Thu Jul 27 16:50:59 2006
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -6
MODULE niuxi_mt.c
LINE 1237
DETAIL NiPRead (0.0.0.0/0)
SYSTEM CALL recv
ERRNO 104
ERRNO TEXT Connection reset by peer
COUNTER 3
Transaction end **********************************************************
TRACE [iaxxejsbas.hpp:156]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown exception
ERROR 2006-07-27 16:50:59 [iaxxejsctl.cpp:241]
EJS_ControllerImpl::executeScript()
FJS-00012 Error when executing script.
TRACE [iaxxgenimp.cpp:428]
processUserInput()
got notification...
TRACE [iaxxsubjct.cpp:58]
notify()
releasing notifyLock
DO YOU HAVE SOME IDEA; HOW I CAN SOLVING THIS PROBLEM
Thanks
Jose MarcosHi Johanes
Thank you very much fot your email
Sorry Im new in this Installation
I have some questions.
I see the SPdent, and I dont have any SP Installed
<b>In the etc/host I have</b>:
hosts This file describes a number of hostname-to-address
mappings for the TCP/IP subsystem. It is mostly
used at boot time, when no name servers are running.
On small systems, this file can be used instead of a
"named" name server.
Syntax:
IP-Address Full-Qualified-Hostname Short-Hostname
127.0.0.1 localhost
special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix
ff02::1 ipv6-allnodes
ff02::2 ipv6-allrouters
ff02::3 ipv6-allhosts
192.168.101.29 rpone.local rpone
I need to install the SP?
What IP I need to delete ?
Regards
Jose -
FRF-00007 Unable to open RFC connection.
I am trying to install SAP R/3 Enterprise 4.70 on Windows Server 2000, database Oralce 9.2 and I want to install entire SAP system in 1 Computer.
I have been installed Oracle 9.2 and SAP's center service successfully.
But when i install SAP's database service it throws error as below and
teminated.
ERROR 2006-12-04 01:01:08
FRF-00007 Unable to open RFC connection.
ERROR 2006-12-04 07:03:21
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failedConnect_PM GWHOST=diane, GWSERV=sapgw00, ASHOST=diane, SYSNR=00Hi,
I had a similar error, with windows 2000 advanced server, oracle 9.2.0.6, SAP BW 3.1.
To resolve this error please upgrade your kernel.
download the kernel. say 640
uncar the files sapdbexe.sar and sapexe.sar using the sapcar.exe
on dos prompt go to the particular directory where u have downloaded the above sar files using "cd" command.
SAPCAR -xvf <your-SAR-file> to uncar the files.
shut down sap using the MMC.
then in services stop saposcol
oracle service sapserviceSID
and the sapSID_##
now just copy the new kerlnel files you have uncared above into the /usr/sap/SID/exe/run/ directory.
start the services you stopped and start SAP using the MMC.
Now you should be able to logon. Somtimes the MMC shows the yellow status due to missing workprocess status. However the system should work fine.
Manmath. -
Unable to open RFC connection - Err message
I all
I am trying to install SAP ERP 2004 SR1 on Microsoft Windows Server 2003, SQL Server 2000. I have successfully installed the Central Instance but when I try to install the Database instance after the database loading the following error is given:
FRF00007 - Unable to open RFC connection.
I have also tried to start the sap system. The message_server and igswd processed run ok, but the disp+work process is stopped.
I am also sending you the developer trace for this process.
Thank you a lot
Vasil
trc file: "dev_disp", trc level: 1, release: "640"
Mon Jul 27 11:24:48 2009
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, Unicode
pid 2668
***LOG Q00=> DpSapEnvInit, DPStart (01 2668) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Mon Jul 27 11:24:53 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 058C0040, size: 3192688)
DpShMCreate: allocated sys_adm at 058C0040
DpShMCreate: allocated wp_adm at 058C1B58
DpShMCreate: allocated tm_adm_list at 058C4478
DpShMCreate: allocated tm_adm at 058C44A0
DpShMCreate: allocated wp_ca_adm at 05B6B0E8
DpShMCreate: allocated appc_ca_adm at 05B70EA8
DpShMCreate: allocated comm_adm_list at 05B72DE8
DpShMCreate: allocated comm_adm at 05B72E00
DpShMCreate: allocated vmc_adm_list at 05BB9AD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05BB9AF8
DpShMCreate: allocated wall_adm at 05BB9B00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1131 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
***LOG Q0K=> DpMsAttach, mscon ( upayweb1) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Jul 27 11:24:54 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Mon Jul 27 11:25:33 2009
ERROR => W0 (pid 3740) died [dpxxdisp.c 12187]
ERROR => W1 (pid 3748) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3756) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3764) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3772) died [dpxxdisp.c 12187]
ERROR => W5 (pid 3780) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3792) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3800) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3740 (SIGUSR2)
ERROR => DpWpKill(3740, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3748 (SIGUSR2)
ERROR => DpWpKill(3748, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3756 (SIGUSR2)
ERROR => DpWpKill(3756, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-3764 (SIGUSR2)
ERROR => DpWpKill(3764, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3772 (SIGUSR2)
ERROR => DpWpKill(3772, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3780 (SIGUSR2)
ERROR => DpWpKill(3780, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3792 (SIGUSR2)
ERROR => DpWpKill(3792, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-3800 (SIGUSR2)
ERROR => DpWpKill(3800, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:43 2009
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Jul 27 09:25:43 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3740 Ended no 1 0 0
1 DIA 3748 Ended no 1 0 0
2 UPD 3756 Ended no 1 0 0
3 ENQ 3764 Ended no 1 0 0
4 BTC 3772 Ended no 1 0 0
5 BTC 3780 Ended no 1 0 0
6 SPO 3792 Ended no 1 0 0
7 UP2 3800 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jul 27 09:25:43 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Mon Jul 27 09:25:43 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jul 27 09:25:43 2009
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:48 2009
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3724) (SOFT_KILL)
Stop icman
killing process (3732) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3724 HANDLE:1592)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:49 2009
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3724 HANDLE:1592)
[DpProcDied] Process died (PID:3732 HANDLE:1584)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'upayweb1'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1596
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2668) [dpxxdisp.c 8495]
Good Bye .....Hi Juan <br>
I am sending you the log from dev_w0 <br>
<br>
Thank you a lot,<br>
Vasil
<br> <br>
<br>
<br>
trc file: "dev_w0", trc level: 1, release: "640"<br>
<br>
*<br>
ACTIVE TRACE LEVEL 1<br>
ACTIVE TRACE COMPONENTS all, M<br>
*<br>
B <br>
B Mon Jul 27 11:24:53 2009<br>
B create_con (con_name=R/3)<br>
B Loading DB library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' ...<br>
B Library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' loaded<br>
B Version of 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.43)<br>
B New connection 0 created<br>
M systemid 560 (PC with Windows NT)<br>
M relno 6400<br>
M patchlevel 0<br>
M patchno 43<br>
M intno 20020600<br>
M make: multithreaded, Unicode<br>
M pid 3740<br>
M <br>
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3740) [dpxxdisp.c 1160]<br>
I MtxInit: -2 0 0<br>
M DpSysAdmExtCreate: ABAP is active<br>
M DpSysAdmExtCreate: JAVA is not active<br>
M DpShMCreate: sizeof(wp_adm) 10528 (1316)<br>
M DpShMCreate: sizeof(tm_adm) 2780232 (13832)<br>
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)<br>
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)<br>
M DpShMCreate: sizeof(comm_adm) 290000 (580)<br>
M DpShMCreate: sizeof(vmc_adm) 0 (372)<br>
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)<br>
M DpShMCreate: SHM_DP_ADM_KEY (addr: 060C0040, size: 3192688)<br>
M DpShMCreate: allocated sys_adm at 060C0040<br>
M DpShMCreate: allocated wp_adm at 060C1B58<br>
M DpShMCreate: allocated tm_adm_list at 060C4478<br>
M DpShMCreate: allocated tm_adm at 060C44A0<br>
M DpShMCreate: allocated wp_ca_adm at 0636B0E8<br>
M DpShMCreate: allocated appc_ca_adm at 06370EA8<br>
M DpShMCreate: allocated comm_adm_list at 06372DE8<br>
M DpShMCreate: allocated comm_adm at 06372E00<br>
M DpShMCreate: allocated vmc_adm_list at 063B9AD0<br>
M DpShMCreate: system runs without vmc_adm<br>
M DpShMCreate: allocated ca_info at 063B9AF8<br>
M DpShMCreate: allocated wall_adm at 063B9B00<br>
X <br>
X Mon Jul 27 11:24:54 2009<br>
X EmInit: MmSetImplementation( 2 ).<br>
X <ES> client 0 initializing ....<br>
X Using implementation flat<br>
M <EsNT> Memory Reset disabled as NT default<br>
X ES initialized.<br>
M <br>
M Mon Jul 27 11:24:55 2009<br>
M calling db_connect ...<br>
C Thank You for using the SLOLEDB-interface<br>
C Using dynamic link library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll'<br>
C dbmssslib.dll patch info<br>
C patchlevel 0<br>
C patchno 43<br>
C patchcomment View with literal containing (0x60) (786638)<br>
C np:(local) connection used on UPAYWEB1<br>
C Using Provider SQLNCLI<br>
C OpenOledbConnection: MARS property was set successfully.<br>
C Provider Release:9.00.1399.06<br>
C Using Provider SQLNCLI<br>
C OpenOledbConnection: MARS property was set successfully.<br>
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 1000 dynamic statements (5672000 bytes), total 37192068 bytes<br>
C Using shared procedure name cache UPAYWEB1_UFTUFT_UFT_MEM initialized by another process.<br>
C Connected to db server : [UPAYWEB1] server_used : [np:(local)], dbname: UFT, dbuser: uft<br>
C pn_id:UPAYWEB1_UFTUFT_UFT<br>
C Not using MARS (on sql 8.0)<br>
B Connection 0 opened<br>
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost <br>
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090727 112454 UPAYWEB1 <br>
C The IRow interface is supported by this OLEDB provider<br>
M db_connect o.k.<br>
I MtxInit: 0 0 0<br>
M SHM_PRES_BUF (addr: 0AD60040, size: 4400000)<br>
M SHM_ROLL_AREA (addr: 5EF60040, size: 160563200)<br>
M SHM_PAGING_AREA (addr: 0B1A0040, size: 72417280)<br>
M SHM_ROLL_ADM (addr: 0F6C0040, size: 1603610)<br>
M SHM_PAGING_ADM (addr: 0F850040, size: 525344)<br>
M ThCreateNoBuffer allocated 540152 bytes for 1000 entries at 0F8E0040<br>
M ThCreateNoBuffer index size: 3000 elems<br>
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0F970040<br>
X EmInit: MmSetImplementation( 2 ).<br>
X <ES> client 0 initializing ....<br>
X Using implementation flat<br>
X ES initialized.<br>
C <br>
C Mon Jul 27 11:24:58 2009<br>
C The IRow interface is supported by this OLEDB provider<br>
B db_con_shm_ini: WP_ID = 0, WP_CNT = 8<br>
C Using Provider SQLNCLI<br>
C OpenOledbConnection: MARS property was set successfully.<br>
B dbtbxbuf: Buffer TABL (addr: 146900C8, size: 30000000, end: 1632C448)<br>
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1<br>
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5<br>
B dbtbxbuf: protect_shm = 0, force_checks = 0<br>
B dbtbxbuf: tsize_retry = 14304000<br>
B ***LOG BB0=> buffer TABL started with length 30000000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]<br>
B dbtbxbuf: Buffer TABLP (addr: 163300C8, size: 10240000, end: 16CF40C8)<br>
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1<br>
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5<br>
B dbtbxbuf: protect_shm = 0, force_checks = 0<br>
B dbtbxbuf: tsize_retry = 5047296<br>
B ***LOG BB0=> buffer TABLP started with length 10240000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]<br>
B dbtbxbuf: Reading TBX statistics:<br>
B dbtbxbuf: Opening C:\usr\sap\UFT\DVEBMGS01\data\tbxnew failed (No such file or directory).<br>
B dbtbxbuf: Renaming C:\usr\sap\UFT\DVEBMGS01\data\tbxnew to C:\usr\sap\UFT\DVEBMGS01\data\tbxstat failed (No such file or directory).<br>
B dbtbxbuf: 0 object entries precreated<br>
C sloledb.cpp [ParamStmtExec,line 11888]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.<br>
C Procname: [##Y3UPAYWEB1uft00000037400000000002112455]<br>
C sloledb.cpp [ParamStmtExec,line 11888]: Error/Message: (err 208, sev 16), Invalid object name 'DDLOG'.<br>
C Procname: [##Y3UPAYWEB1uft00000037400000000002112455]<br>
C ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT MAX(SEQNUMBER) AS c FROM DDLOG ]<br>
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112017<br>
C DbSlRead - Error 103 (dbcode 208) on open<br>
C DbSlRead - <##Y3UPAYWEB1uft00000037400000000002112455><br>
C DbSlRead - Error 103 (dbcode 208) on fetch<br>
C DbSlRead - <##Y3UPAYWEB1uft00000037400000000002112455><br>
B ***LOG BZY=> unexpected return code 103 calling SEL [dbsynseq#1 @ 255] [dbsynseq0255 ]<br>
B db_syinit failed<br>
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 252]<br>
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 1901]<br>
M ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1359]<br>
M in_ThErrHandle: 1<br>
M *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 9413]<br>
M <br>
M Info for wp 0<br>
M <br>
M stat = 4<br>
M reqtype = 1<br>
M act_reqtype = -1<br>
M rq_info = 0<br>
M tid = -1<br>
M mode = 255<br>
M len = -1<br>
M rq_id = 65535<br>
M rq_source = 255<br>
M last_tid = 0<br>
M last_mode = 0<br>
M int_checked_resource(RFC) = 0<br>
M ext_checked_resource(RFC) = 0<br>
M int_checked_resource(HTTP) = 0<br>
M ext_checked_resource(HTTP) = 0<br>
M report = > <<br>
M action = 0<br>
M tab_name = > <<br>
M <br>
M *****************************************************************************<br>
M *<br>
M * LOCATION SAP-Server upayweb1_UFT_01 on host upayweb1 (wp 0)<br>
M * ERROR tskh_init: ThIPCInit<br>
M *<br>
M * TIME Mon Jul 27 11:24:58 2009<br>
M * RELEASE 640<br>
M * COMPONENT Taskhandler<br>
M * VERSION 1<br>
M * RC 17<br>
M * MODULE thxxhead.c<br>
M * LINE 9589<br>
M * COUNTER 1<br>
M *<br>
M *****************************************************************************<br>
M <br>
M PfStatDisconnect: disconnect statistics<br>
M Entering TH_CALLHOOKS<br>
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP<br>
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]<br>
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252]<br>
M Entering ThSetStatError<br>
M Entering ThReadDetachMode<br>
M call ThrShutDown (1)...<br>
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3740) [dpnttool.c 357]<br> -
Unable to open RFC connection to SAP System NSP
Hi all,
During installation i am getting an error which is as follows,
"Unable to open RFC connection to SAP System NSP.
Solution: Start the system."
And the second problem is that there are no connections shown in SAPGUI.
Please help me out.
Thanking you,
KranthiHI Kranthi,
Have you checked this thread NW Preview Installation error?
Regards -
ORA-28575: unable to open RPC connection to external procedure agent
Hi everybody,
Could you please help me with this problem? I'm trying to configure Oracle XE 11g for external procedures, this because I have to access some procedures in a DLL made in Delphi 6.0, but even with the simplest of the dll I make, like a sum made in C, I can't get pass this error ORA-28575: unable to open RPC connection to external procedure agent.
This is my listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS = (PROTOCOL = TCP)(HOST = myPC)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
and this is my tnsnames.ora:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = myPC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Do you know what could be wrong? I'm out of ideas and google search...
Also, is there any difference in a calling for a DLL made on VB and one made in Delphi??
Thanks and Regards,Hello,
This error could appear due to issues with configuration of your listener, database or with extproc. First check that the permissions on extproc in your Oracle_home specified in your listener.ora file are valid:
Run the following ./extproc and it should display the banner.
If above is ok, then check for the domain name. One probable reason could be that if default_domain is set and that domain is not appended to the service name in tnsnames.ora, the connection fails.
regards
fahdmirza.blogspot.com -
Error when opening RFC Connection
Hello SAPers,
I have configured PDA in my ECC6.0 --- XI (ABAP+JAVA) Which was successful.
In my Web Dyno Pro Content Administrator
I have performed the JCO Destinations test which was successful
when I go to the URL
http://server:port/webdynpro/dispatcher/sap.com/isisrsrsmenapp/MainApp
entered the store number
In the next menu
Inventory Lookup when I enter the Article number and press Go Button
It is giving me error " Error when opening RFC Connection "
Rest of them working perfectly...
Do I need to do any configuration In Visual Admin?
Could anyone advice
Thanks In Advance
HariKrishnaThanks it got solved it was an error in RFC, I have changed the RFC now it is working fine
Thanks
Hari -
"COMMUNICATION FAILURE" during JCo call. Error opening RFC connection
Hi
I am trying the following scenario
/people/varadharajan.krishnasamy/blog/2007/05/11/how-to-use-digital-certificates-for-signing-encrypting-messages-in-xi
In SM 59 test connection of AI_RUNTIME_JCOSERVER throws error " Error opening RFC connection"
Do I need to activate any service in SICF and do I need to do any IE configuration (sxmb_adm)
pls let me know the steps to solve this
thanks
manianHi Manian,
pls chk with ABAP system tha tu have given the correct PWD and CLNT No
Use
You need to create the following RFC destinations with both transaction SM59 (ABAP) and the Visual Administrator (Java):
● AI_RUNTIME_JCOSERVER
Points from the Integration Server to the mapping runtime. The program ID corresponds to the entry under JCo RFC provider for the J2EE Engine (used for the mapping runtime, value mapping, and the exchange profile).
● AI_DIRECTORY_JCOSERVER
Points from the Integration Server to the Integration Builder. The program ID corresponds to the entry under JCo RFC provider for the J2EE Engine (used to refresh the runtime cache).
● LCRSAPRFC
The RFC destination LCRSAPRFC is required for the connection to the System Landscape Directory (SLD). It is used to read the exchange profile.
● SAPSLDAPI
The RFC destination SAPSLDAPI is required for the connection to the SLD. It is used by the ABAP API.
Depending on your client settings, it may be necessary to log on to your Integration Server host as SAP system user with the authorization to maintain customizing tables and to release transport orders.
User SAP* or DDIC does not have these authorizations
Thanx
Sampath -
Hello,
I had installed ore 1.3.1 windows server 2008 on top of Oracle DB 11.2.0.3 ,but when I connect the database,it didn't work.
That is my code and error code.
ore.connect(user = "rquser", sid = "db11g", host = "....", password = "....", all = TRUE)
Got error as below:
error.oci.GetQuery(conn, statement, data = data, prefetch = prefetch, :
ORA-28575: unable to open RPC connection to external procedure agent
ORA-06512: at "RQSYS.RQEVALIMPL", line 17
ORA-06512: at "RQSYS.RQEVALIMPL", line 14
ORA-06512: at line 4
Also i have follwed the below link:
///ORE1.3-ore-server-win-x86_64-1.3,error ORA-28575: unable to open RPC connec
But failed to resolve the problem.
Below are the TNS and Listener file entry:
# listener.ora Network Configuration File: F:\OracleDB\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = EXTPROC)
(ORACLE_HOME = H:\ORA11G\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:H:\ORA11G\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.168.11.69)(PORT = 1521))
ADR_BASE_LISTENER = H:\ORA11G
-============================
# tnsnames.ora Network Configuration File: F:\OracleDB\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = EXTPROC)
(PRESENTATION = RO)
DB11G =
(DESCRIPTION =
(ADDRESS_LIST=
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.168.11.69)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = DB11G)
====================================================
Thanks
SandyHi Sandy,
If you set EXTPROCS_DLLS=ANY in the listener and then restart the listener, does it fix the problem?
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = EXTPROC)
(ORACLE_HOME = H:\ORA11G\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ANY")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.168.11.69)(PORT = 1521))
Sherry -
Set up Tape Drive and Library on Sun/Sparc: unable to open qlm connection
Hi There:
Having closely followed OSB documentaion, w/ success ... we have come upon a "qlm connection" problem, on our Sun/Sparc platform:
uname -msrvapi
SunOS rsc1appsvr1 5.10 Generic_125100-04 sun4u sparc SUNW,Sun-Fire-480R
If you please, can you suggest a solution, below is error and details from obtool>
ob> lsvol -L tc-lib
Error: unable to open qlm connection - device not found in external table
ob> lsdev
library tc-lib in service
drive 1 tc-tape in service
ob>
ob> lsdev rsc1appsvr1
Error: can't resolve device rsc1appsvr1 - name not found
ob> lsdev rsc1appsvr1
Error: can't resolve device rsc1appsvr1 - name not found
ob> lsdev -l
tc-lib:
Device type: library
Model: [none]
Serial number: [none]
In service: yes
Debug mode: no
Barcode reader: default (hardware-selected)
Barcodes required: no
Auto clean: no
Clean interval: (not set)
Clean using emptiest: no
UUID: 68bf05e0-d0de-1029-9c8b-cbb22d367641
Attachment 1:
Host: rsc1appsvr1
Raw device: /dev/obl0
tc-tape:
Device type: tape
Model: [none]
Serial number: [none]
In service: yes
Library: tc-lib
DTE: 1
Automount: yes
Error rate: 8
Query frequency: 1645915KB (1685417328 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Use list: all
Drive usage: [not set]
Cleaning required: [unknown]
UUID: ae73d426-d0de-1029-9c8b-cbb22d367641
Attachment 1:
Host: rsc1appsvr1
Raw device: /dev/obt0
ob>more info:
SERVER> tar -cvf /dev/obt0 *
a add_drv.txt 1K
a envosb 1K
a ident_install/ 0K
a ident_install/Disk4/ 0K
a ident_install/Disk4/stage/ 0K
a ident_install/Disk4/stage/Patches/ 0K
a ident_install/Disk4/stage/Patches/oracle.tg.tg4ifmx/ 0K
a ident_install/Disk4/stage/Patches/oracle.tg.tg4ifmx/10.1.0.4.2/ 0K
a ident_install/Disk4/stage/Patches/oracle.tg.tg4ifmx/10.1.0.4.2/1/ 0K
a ident_install/Disk4/stage/Patches/oracle.tg.tg4ifmx/10.1.0.4.2/1/DataFiles/ 0K
a ident_install/Disk4/stage/Patches/oracle.tg.tg4ifmx/10.1.0.4.2/1/DataFiles/bin.2.2.jar 227K
tar: write error: I/O error
elcaro@rsc1appsvr1> -
Fail Safe adding database to group gives error "FS-10006: Unable to open.."
Environment:
Fail Safe 3.4.2
Oracle 11.2.0.1 64bit
Windows 2008 Server 64bit
Two nodes in an active/passive cluster using windows clustering and oracle fail safe.
Problem:
We have created the windows cluster, installed fail safe on both clustered nodes, installed the database software, verified the cluster, created a group and added a virtual address to the group. We also managed to verify the stand alone database instance without any issues. However, when we try to add the database to the group we get the following errors:
Versions: client = 3.4.1 server = 3.4.2 OS =
Operation: Adding resource "THORD" to group "EO_THORD_GRP"
Starting Time: Jul 26, 2010 16:23:04
Elapsed Time: 0 minutes, 2 seconds
1 16:23:04 Starting clusterwide operation
2 16:23:05 FS-10370: Adding the resource THORD to group EO_THORD_GRP
3 16:23:05 FS-10371: ClusterNode1 : Performing initialization processing
4 16:23:05 FS-10371: ClusterNode2 : Performing initialization processing
5 16:23:05 FS-10372: ClusterNode1 : Gathering resource owner information
6 16:23:05 FS-10372: ClusterNode2 : Gathering resource owner information
7 16:23:05 FS-10373: ClusterNode1 : Determining owner node of resource THORD
8 16:23:05 FS-10374: ClusterNode1 : Gathering cluster information needed to perform the specified operation
9 16:23:05 FS-10374: ClusterNode2 : Gathering cluster information needed to perform the specified operation
10 16:23:05 FS-10375: ClusterNode1 : Analyzing cluster information needed to perform the specified operation
11 16:23:05 >>> FS-10652: ClusterNode1 has Oracle Database version 11.2.0.1 installed in OraDb11g_home1
12 16:23:05 >>> FS-10652: ClusterNode2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home1
13 16:23:05 FS-10376: ClusterNode1 : Starting configuration of resource THORD
14 16:23:05 FS-10378: ClusterNode1 : Preparing for configuration of resource THORD
15 16:23:05 FS-10380: ClusterNode1 : Configuring virtual server information for resource THORD
16 16:23:05 ** ERROR : 0x138F: The cluster resource could not be found.
17 16:23:06 ** ERROR : FS-10006: Unable to open the resource
18 16:23:06 ** ERROR : FS-10012: Failed to bring the cluster resource online. Check the Windows event log for messages
19 16:23:06 ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource THORD
20 16:23:06 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
21 16:23:06 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
22 16:23:06 FS-10488: ClusterNode1 : Starting rollback of operation
23 16:23:06 FS-10489: ClusterNode1 : Completed rollback of operation
24 16:23:06 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
25 16:23:06 Please check your Windows Application log using the Event Viewer for any additional errors
26 16:23:06 The clusterwide operation failed !
FS-10006: Unable to open the resourceAll the cluster resources seem to be online. We're all out of ideas here, can someone please shead some light on this or have any ideas how we can go on about this.
Your help is highly appreciated.
ThanksI am getting into the issue (step-6) when I run standalone resource verify after successful step-5 and need your advice.
I will give you information about the infrastructure -
NODE1-2K8-ORADBND1
NODE2-2K8-ORADBND2
Cluster IP-
Virtual IP on NODE1 and NODE2 host file -
OS - Windows 2008 R2 64 bit
Oracle Database - 11gR2
Oracle FailSafe - 3.4.1.6
Oracle SID- ORA11
(ORA11 is up and running on NODE1 active node while running add to group option from - Groups/Standalone Resources to verify the instance and it gets error)
Here is the error log -
Versions: client = 3.3.3 ; server = 3.4.1 ; OS =
Operation: Adding resource "ORA11" to group "Available Storage"
Starting Time: Sep 02, 2010 12:50:06
Elapsed Time: 0 minutes, 1 seconds
1 12:50:06 Starting clusterwide operation
2 12:50:06 FS-10370: Adding the resource ORA11 to group Available Storage
3 12:50:06 FS-10371: 2K8-ORADBND1 : Performing initialization processing
4 12:50:06 FS-10371: 2K8-ORADBND2 : Performing initialization processing
5 12:50:07 FS-10372: 2K8-ORADBND1 : Gathering resource owner information
6 12:50:07 FS-10372: 2K8-ORADBND2 : Gathering resource owner information
7 12:50:07 FS-10373: 2K8-ORADBND1 : Determining owner node of resource ORA11
8 12:50:07 FS-10374: 2K8-ORADBND1 : Gathering cluster information needed to perform the specified operation
9 12:50:07 ** ERROR : FS-10791: The Oracle Database resource provider failed while gathering cluster information for resource ORA11
10 12:50:07 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
11 12:50:07 Please check your Windows Application log using the Event Viewer for any additional errors
12 12:50:07 The clusterwide operation failed !
Thanks for your help! -
ERROR http: 5: Unable to initialize ssl connection with server, aborting co
HI EXPERTS,
one of my database give me below error when i start its dbconsole. and after failure it give me meassge
TZ set to Asia/Karachi
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://test:5500/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ..............................................................
........ failed.
Logs are generated in directory /u01/oracle/product/10.2/cnichol_cpuplt/sysman/log
and in trace file name "emdctl.trc" below error is logged.
ERROR http: 5: Unable to initialize ssl connection with server, aborting connection attempt
ERROR ssl: nzos_Handshake failed, ret=29024
and trace file named "emagent.trc" give below error
2010-10-04 19:12:25 Thread-88238992 ERROR http: 11: Unable to initialize ssl connection with server, aborting connection attempt
2010-10-04 19:12:25 Thread-88238992 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://test:5500/em/upload/: retStatus=-1
2010-10-04 19:12:38 Thread-88238992 ERROR upload: Error in uploadXMLFiles. Trying again in 300.00 seconds.
dbconosle URL is
https://test:5500/em/console/aboutApplication
Operating system is Redhat linux AS 5.3
what is the possible cause of this failure any one can guide me.
thanx in Advance
regards,
Edited by: AMIABU on Oct 4, 2010 7:28 AMoracle@bcm-laptop:~$ emctl
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Oracle Enterprise Manager 10g Database Control commands:
emctl start | stop dbconsole
emctl status | secure | setpasswd dbconsole
emctl config dbconsole -heap_size <size_value> -max_perm_size <size_value>
emctl status agent
emctl status agent -secure [-omsurl <http://<oms-hostname>:<oms-unsecure-port>/em/*>]
emctl getversion
emctl reload | upload | clearstate | getversion agent
emctl reload agent dynamicproperties [<Target_name>:<Target_Type>]....
emctl config agent <options>
emctl config agent updateTZ
emctl config agent getTZ
emctl resetTZ agent
emctl config agent credentials [<Target_name>[:<Target_Type>]]
emctl gensudoprops
emctl clearsudoprops
Blackout Usage :
emctl start blackout <Blackoutname> [-nodeLevel] [<Target_name>[:<Target_Type>]].... [-d <Duration>]
emctl stop blackout <Blackoutname>
emctl status blackout [<Target_name>[:<Target_Type>]]....
The following are valid options for blackouts
<Target_name:Target_type> defaults to local node target if not specified.
If -nodeLevel is specified after <Blackoutname>,the blackout will be applied to all targets and any target list that follows will be ignored.
Duration is specified in [days] hh:mm
emctl getemhome
emctl ilint
Em Key Commands Usage :
emctl config emkey -emkeyfile <emkey.ora path> [-force] [-sysman_pwd <sysman password>]
emctl config emkey -emkey [-emkeyfile <emkey.ora path>] [-force] [-sysman_pwd <sysman password>]
emctl config emkey -repos [-emkeyfile <emkey.ora path>] [-force] [-sysman_pwd <sysman password>]
emctl config emkey -remove_from_repos [-sysman_pwd <sysman password>]
emctl config emkey -copy_to_repos [-sysman_pwd <sysman password>]
emctl status emkey [-sysman_pwd <sysman password>]
Secure DBConsole Usage :
emctl secure dbconsole -sysman_pwd <sysman password> [-passwd_file <abs file loc>]
[-host <slb hostname>] [-sid <service name>] [-reset] [-secure_port <secure_port>]
[-root_dc <root_dc>] [-root_country <root_country>] [-root_state <root_state>] [-root_loc <root_loc>]
[-root_org <root_org>] [-root_unit <root_unit>] [-root_email <root_email>]
[-wallet <wallet loc>] [-wallet_pwd <wallet pwd>] [-trust_certs_loc <certs loc>]
emctl secure status dbconsole
Register Targettype Usage :
emctl register oms targettype [-o <Output filename>] <XML filename> <rep user> <rep passwd> <rep host> <rep port> <rep sid> OR
emctl register oms targettype [-o <Output filename>] <XML filename> <rep user> <rep passwd> <rep connect descriptor> -
ID CS3 "Error Code 5" Unable to open, file damaged beyond recovery. HELP!
System: Apple Dual 500 Mhz PowerPC G4, 1.75 GB SDRAM, Mac OSX 10.4.11.
I have a 36pg ID CS3 document, which is over 2gb because of embedded images. Workflow: create doc using links; when finished, embed all images then unembed to new folder to consolidate. then simply resave the ID CS3 file using the new links. sadly, having embedded, i was unable to save. so, i closed without saving. Now i am unable to open the file.
no problems before embedding, now get "error code 5, unable to open..."
I am painfully aware (now) that this is a bad workflow, as am i aware of several ways to improve this workflow. I do not need advice on a better workflow, i already know i did a stupid thing. i need help on how to recover the damaged file. quick. please. :)
does anyone have a workaround?Thanks for the tip, Bob. i spoke with a marketing guy at Markzware who asked me to forward it on, he was kind and helpful.
-
Error: sp2-0310 unable to open file c:\desktop\oracle\table.sql
I am not able to open any files that I have downloaded and put into a file path. I keep getting the error sp2-0310 unable to open file. I made sure to save my files in a path with no spaces. What can I do to resolve this error message.
Thanks.As already said, you need to verify you've really got the correct path. After that, you can also check to see that the file name is really table.sql. If you created the file in a simple text editor, sometimes the editor will append .txt to the file name. But if you have "Hide Extensions" turned on in Windows Explorer, then you wouldn't see the .txt extension. Check the file name and make sure it really is as you think and doesn't have another extension on it.
Finally, how are you trying to use the file in SQL*Plus? If the path and file name are correct, you should be able to do this:
SQL> get c:\desktop\oracle\table
and it should bring up the file into the SQL*Plus buffer. Or, you should be able to use:
SQL> @c:\desktop\oracle\table
to execute the contents of the file.
If you are simply using:
SQL> @table
then you could add the SQLPATH environment variable to point to c:\desktop\oracle and that would allow you to skip entering the path.
Hope this helps,
Karen -
Error while saving web template in WAD? Error in opening RFC Connection?
Hi All.
In BI 7.0, While trying to save an web template using BEx WAD resulting an error as mentioned below:
" Java communication error : Error when opening an RFC connection "
Who provides this RFC connection?
- By Basis guy or BI Guy or EP guy or helpdesk.
Please reply.
Thanks in Advance.Hi,
Kindly review the notes 917950 and 888687 and ensure that all your web configuration settings are proper.
Award points if helpful.
Thank you.
Regards
Suresh
Maybe you are looking for
-
Is there a way of passing a mixed cluster of numbers and booleans to teststand
Hi, I have a labview VI that contains an output cluster containing both numeric and boolean results and would like to pass this to Teststand. At the moment I have coverted all my boolean results to '1/0' so that I can create a numeric array and can
-
When I open a photo to edit it; why is it not high quality?
My photo is great when I open or view it in any other application. Why does it look low quality in pse 11? Also when I make edits and save them as jpegs, they look great again outside of pse11. Is there a setting I am missing?
-
Buffer overrun with rxtx API (serial communication)
Hi, I've succesfully installed the rxtx API (http://www.rxtx.org) and I really love it. I do however experience a problem. When I connect my serial device (a USB device which enumerates as a virtual COM port) and communicate with it, then there's no
-
Time Machine continually tells me that it needs over 500 GB of space to do a back up when I only have 125GB used on my iMac disk and that is if it takes everything. I can't seem to figure out what it's pulling and from where to limit it.
-
HT4914 How do I unsubscribe to iTunes Match?
Hi, I want to change my country location in iTunes but I can't with active iTunes Match account, how can I unsubscribe?