Error FRM 0008 when it's trying to import universe to BOE XI R2 repository

When I try to import a universe to BOE XI R2 repository, Designer displays the following message: "You are not authorized to use this document (FRM00008)"
Problem: when re-install of BOE XI R2 on a new repository without access to the old repository.
Solution: http://jorgelorenzo.org/SBO/repair_universe_cms_import.doc

Hi Gavin,
Also... you could try creating the BIAR file by only selecting a few objects and see if this works. As Tim has mentioned, size also becomes a problem.
I has this before, exporting everthing from enterprise into the BIAR file and then when I wanted to import it back to the same server i.e used it as a backup, the BIAR file size on disk was big, but when I wanted to get access to the content, it there was nothing... just a big file.
If the small selections are working for you, then created seperate BIAR files for the objects etc.
Regards
Jacques

Similar Messages

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured. File activity incomplete. 1 file(s) or folder(s) were not completed. Files with errors: 1 /html

Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
Mylenium

I keep getting error code 4450 when I'm trying to burn a CD from itunes. It keeps my CD and won't eject it and says "cancelling burn" forever then itunes locks up and my cd is ruined and NO songs on it.

i can't burn cd's in iTunes anymore. I get error code 4450 when I'm trying to burn a playlist. Songs from my own cd's, or bought in iTunes (have not burned 7x's as I can't BURN any cd's at all!), Then my cd gets stuck in the drive. and it says "cancelling burn" forever and then itunes freezes up. I have a Dell with Windows 7.
-I've slowed down the burn as slow as it can go
-I have bought 3 different brands of cd's
-i have the latest version of iTunes.
Can someone help me?

I have Windows 7 on a Dell. Open and play iTunes in the compatability mode and use Windows XP (service pack 2). Disregard any messsages to disable the compability mode. This has worked for me. I have also reinstalled iTunes and played with burn speeds etc. These ideas did not work. Compatability mode works.

My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my

My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my phone on my computer it would begin the processes then half way through it would say IPHONE has been disconnected, now it won't recognize it or anything. what can i do? This is a brand new phone!!!

Hello jraff21,
I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
iOS: Restore errors 4005, 4013, and 4014 - Apple Support
You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
The iPhone [device name] could not be restored. An unknown error occurred (4005).
The iPhone [device name] could not be restored. An unknown error occurred (4013).
The iPhone [device name] could not be restored. An unknown error occurred (4014).
Try these steps to resolve the issue:
Install the latest version of iTunes.
Restart your computer.
Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
Restore using another USB cable.
Learn more about updating OS X.
Learn more about updating Windows.
Restore your device on another computer.
If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
Learn more about other update and restore errors.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Error FRM:30312 when compiling webutil.pll

Error FRM:30312 when compiling webutil.pll
I download the webutil_1_6.zip, and implementing the configuration instructions arrived to the point that states to compile the webtutil.pll file, the compiler generates the error: FRM-30312: Failed to compile the library. Any idea.
The environment:
OAS: 9.0.4
OS: UNIX TRU 64 ver 1.5.b
Considerations:
I execute the create_webutil_db.sql in the required database.
Other pll and fmb files of my application compile without problems.
I configure the Webutil 1.6 in a Windows 2000 machine with Developer Suite 9.0.4 without problems.

Michael I follow your recommendations, make the compilation in the local machine, and change the command line, but the error still appear:
I execute the following command line:
f90genm.sh module=webutil.pll userid=comun/comun@chirripo
module_type=library compile_all=yes
It generate this:
Forms 9.0 (Form Compiler) Version 9.0.4.1.0 (Production)
Forms 9.0 (Form Compiler): Release - Production
(c) Copyright 2001 Oracle Corporation. All rights reserved.
Oracle9i Enterprise Edition Release 9.0.1.4.0 - Production
With the Partitioning option
JServer Release 9.0.1.4.0 - Production
PL/SQL Version 9.0.1.5.0 (Production)
Oracle Procedure Builder V9.0.3.5.0 Build #0 - Production
Oracle Virtual Graphics System Version 9.0.1.11.0 (Production)
Oracle Multimedia Version 9.0.4.1.0 (Production)
Oracle Tools Integration Version 9.0.4.0.0 (Production)
Oracle Tools Common Area Version 9.0.2.12.0
Oracle CORE 9.0.1.2.0 Production
Compiling library WEBUTIL...
Invalidating Package Spec WEBUTIL_UTIL......
Invalidating Package Spec WEBUTIL_SESSION......
Invalidating Package Spec WEBUTIL_SEPARATEFRAME......
Invalidating Package Spec WEBUTIL_HOST......
Invalidating Package Spec WEBUTIL_FILE_TRANSFER......
Invalidating Package Spec WEBUTIL_FILE......
Invalidating Package Spec WEBUTIL_DB_LOCAL......
Invalidating Package Spec WEBUTIL_C_API......
Invalidating Package Spec WEBUTIL_CORE......
Invalidating Package Spec WEBUTIL_CLIENTINFO......
Invalidating Package Spec WEBUTIL_BROWSER......
Invalidating Package Spec JAVA_SYSTEM......
Invalidating Package Spec JAVA_FILE......
Invalidating Package Spec JAVA_EXCEPTION......
Invalidating Package Spec JAVA_APPSERV_WRITER......
Invalidating Package Spec JAVA_APPSERV_READER......
Invalidating Package Spec DELIMSTR......
Invalidating Package Spec CLIENT_WIN_API_PRELOAD......
Invalidating Package Spec CLIENT_WIN_API_ENVIRONMENT......
Invalidating Package Spec CLIENT_WIN_API_DEBUG......
Invalidating Package Spec CLIENT_WIN_API......
Invalidating Package Spec CLIENT_TOOL_ENV......
Invalidating Package Spec CLIENT_TEXT_IO......
Invalidating Package Spec CLIENT_OLE2......
Invalidating Package Spec CLIENT_IMAGE......
Invalidating Package Body WEBUTIL_UTIL......
Invalidating Package Body WEBUTIL_SESSION......
Invalidating Package Body WEBUTIL_SEPARATEFRAME......
Invalidating Package Body WEBUTIL_HOST......
Invalidating Package Body WEBUTIL_FILE_TRANSFER......
Invalidating Package Body WEBUTIL_FILE......
Invalidating Package Body WEBUTIL_DB_LOCAL......
Invalidating Package Body WEBUTIL_C_API......
Invalidating Package Body WEBUTIL_CORE......
Invalidating Package Body WEBUTIL_CLIENTINFO......
Invalidating Package Body WEBUTIL_BROWSER......
Invalidating Procedure Body SHOW_WEBUTIL_INFORMATION......
Invalidating Package Body JAVA_SYSTEM......
Invalidating Package Body JAVA_FILE......
Invalidating Package Body JAVA_EXCEPTION......
Invalidating Package Body JAVA_APPSERV_WRITER......
Invalidating Package Body JAVA_APPSERV_READER......
Invalidating Package Body DELIMSTR......
Invalidating Package Body CLIENT_WIN_API_PRELOAD......
Invalidating Package Body CLIENT_WIN_API_ENVIRONMENT......
Invalidating Package Body CLIENT_WIN_API_DEBUG......
Invalidating Package Body CLIENT_WIN_API......
Invalidating Package Body CLIENT_TOOL_ENV......
Invalidating Package Body CLIENT_TEXT_IO......
Invalidating Package Body CLIENT_OLE2......
Invalidating Package Body CLIENT_IMAGE......
Invalidating Procedure Body CLIENT_HOST......
Invalidating Function Body CLIENT_GET_FILE_NAME......
Compiling Package Spec WEBUTIL_UTIL......
Compiling Package Spec WEBUTIL_SESSION......
Compiling Package Spec WEBUTIL_SEPARATEFRAME......
Compiling Package Spec WEBUTIL_HOST......
Compiling Package Spec WEBUTIL_FILE_TRANSFER......
Compiling Package Spec WEBUTIL_FILE......
Compiling Package Spec WEBUTIL_DB_LOCAL......
Compiling Package Spec WEBUTIL_C_API......
Compiling Package Spec WEBUTIL_CORE......
Compiling Package Spec WEBUTIL_CLIENTINFO......
Compiling Package Spec WEBUTIL_BROWSER......
Compiling Package Spec JAVA_SYSTEM......
Compiling Package Spec JAVA_FILE......
Compiling Package Spec JAVA_EXCEPTION......
Compiling Package Spec JAVA_APPSERV_WRITER......
Compiling Package Spec JAVA_APPSERV_READER......
Compiling Package Spec DELIMSTR......
Compiling Package Spec CLIENT_WIN_API_PRELOAD......
Compiling Package Spec CLIENT_WIN_API_ENVIRONMENT......
Compiling Package Spec CLIENT_WIN_API_DEBUG......
Compiling Package Spec CLIENT_WIN_API......
Compiling Package Spec CLIENT_TOOL_ENV......
Compiling Package Spec CLIENT_TEXT_IO......
Compiling Package Spec CLIENT_OLE2......
Compiling Package Spec CLIENT_IMAGE......
Compiling Package Body WEBUTIL_UTIL......
Compiling Package Body WEBUTIL_SESSION......
Compiling Package Body WEBUTIL_SEPARATEFRAME......
Compiling Package Body WEBUTIL_HOST......
Compiling Package Body WEBUTIL_FILE_TRANSFER......
Compiling Package Body WEBUTIL_FILE......
Compiling Package Body WEBUTIL_DB_LOCAL......
Compiling Package Body WEBUTIL_C_API......
Compiling Package Body WEBUTIL_CORE......
Compiling Package Body WEBUTIL_CLIENTINFO......
Compiling Package Body WEBUTIL_BROWSER......
Compiling Procedure Body SHOW_WEBUTIL_INFORMATION......
Compiling Package Body JAVA_SYSTEM......
Compiling Package Body JAVA_FILE......
Compiling Package Body JAVA_EXCEPTION......
Compiling Package Body JAVA_APPSERV_WRITER......
Compiling Package Body JAVA_APPSERV_READER......
Compiling Package Body DELIMSTR......
Compiling Package Body CLIENT_WIN_API_PRELOAD......
Compiling Package Body CLIENT_WIN_API_ENVIRONMENT......
Compiling Package Body CLIENT_WIN_API_DEBUG......
Compiling Package Body CLIENT_WIN_API......
Compiling Package Body CLIENT_TOOL_ENV......
Compiling Package Body CLIENT_TEXT_IO......
Compiling Package Body CLIENT_OLE2......
Compiling Package Body CLIENT_IMAGE......
Compiling Procedure Body CLIENT_HOST......
Compiling Function Body CLIENT_GET_FILE_NAME......
FRM-30312: Failed to compile the library.
Thanks.

HT201302 When I am trying to import pictures from my iphone to PC, I get the message'No new pictures of videos were found on this device'. There are lots of pictures which i can see on the iphone. I have a 4S. Is there a way to get around that?

When I am trying to import pictures from my iphone to PC, I get the message'No new pictures of videos were found on this device'. There are lots of pictures which i can see on the iphone. I have a 4S. Is there a way to get around that?

It sounds like you are using an application to import. You can do it manually.
Start > Computer (on the right) > scroll to the bottom and you will see your iPhone under Portable Devices > Open it and you will see a Drive, open that and there will be a DCIM folder. That is where your photos will be (There may be other folders each holding photos).

HT4792 So I have a question for this: I folowed this procedure, but when I'm trying to import the IOS from IMovies in my laptop I receive a message that states that the IMovie version installed doen't supports IOS files, although I have the last version i

So I have a question for this: I folowed this procedure, but when I'm trying to import the IOS from IMovies in my laptop I receive a message that states that the IMovie version installed doen't supports IOS files, although I have the last version installed with all the updates... Any ideas, thoughts?
Thanks

I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul

Error FRM-41816: When creating a territory based on territory type

Hi, guys!
So the problem is: I have a territory type for usage in Oracle Service, there are 3 transaction types defined - Service Request, Service Request and Task, Task - in this territory type.
So when I try to create territory based on this territory type, I get an Error FRM-41816: Attempt to create existing timer: POST_BLOCK_TRANX.
If I'm not using territory type to create a territory, this error doesn't show up.
Any solutions, would be greatly appreciated.
JAN

Shira,
Sorry, just re-read your post. Am I correct in thinking that you want to use the Controllers assigned within SPM to act as the approvers in CUP?
If so, what support pack version are you on as I believe that this only works in SP08 due to a technical bug. This also impacts the SPM Owners acting as approvers.
You may also wish to check the connectors and authorisations of the connector IDs as without being able to read the tables, the approvers may not be found.
Simon
Edited by: Simon P Persin on Nov 16, 2009 4:37 PM

Error FRM-91500 when compile from remote host

Dear all,
I have a problem when compiling forms from remote using 'frmcmp.sh'. It creates error :
"FRM-91500: Unable to start/complete the build."
and when I try to compile from remote host using 'frmcmp', it creates error:
"frmcmp: error while loading shared libraries: libjvm.so: cannot open shared object file: No such file or directory"
The problem is also occured when I use vnc, ssh, telnet. So I can't complie forms when I login from remote host.
But,
the problem doesn't occured if I compile forms by login FROM SERVER directly. There's no firewall between me and the server, network connection is good, and I already try some advice from this forum using:
export ORACLE_TERM=vt220
export DISPLAY=202.181.18.31
But It still doesn't work. I try export DISPLAY using my local Ip-address, using my gateway ip-address, but none of them works. Please help me solve this problem so I can compile from remote host
The server specification:
Pentium 4
RAM 1 GB
OS Enterprise Linux AS release 4 (October Update 4)
server IP adddress:x.x.x.x
with product:
Oracle DB 10g
Oracle Apllication Server 10gR2
My own IP address:192.168.13.34
server see me as : x.x.x.x
Regards,
firman

your DISPLAY isn't correct,
it should be something like
export DISPLAY=203.81.184.30:0.0
where 0.0 stands for your local display and the virtual screen on it ..
(or something like that ... )
in any case I first would check the X-Session using some standard X-application
like xterm or xclock
as long as they don't work, your compile will fail
hope that helps
Volker

Why does lightroom 5 do not read or can't find my raw files when I'm trying to import my images from my camera to light room

It just started happening out of the ordinary. I had a photo shoot done today. I came home plugged my camera usb to my mac lap top and tried to import my raw files as i usually do into light room 5 to edit my images. This time the same error message popped up stating it couldn't read or my files weren't found over and over again. Neither the new ones nor the old pictures was able to import them. Please Help!

I just bought Lightroom and have the same problem - MacBook Pro with OS X 10.10.1. LR actually displays the photos properly when previewing but fails when starting the import. Also, a couple of times it would start but would hang up. I think it may be a Yosemite problem. I was having trouble importing with Aperture too. The fail message from LR was:
The following files were not imported because they could not be read. (6)
    IMGP7941.JPG
    IMGP7942.JPG
    IMGP7944.JPG
    IMGP7943.JPG
    IMGP7945.JPG
    IMGP7946.JPG
I can copy the folder from the camera to my desktop and then import. That works but of course I shouldn't have to do that.

Geting an error trying to import a data file into OWB repository

Hi,
We're using OWB 11.1.0.7.0
I'm trying to import a new data file and I'm getting an error.
When I go to The Project/Files/ I right click on the module I want to add the files to,
I get a 'Wizard' titled 'Welcome to the Import Metadata Wizard'.
I click next.
I get the 'Filter Information' screen that asks if I want to select 'All Data Files' or a specific file.
I pick 'All Data Files' and click 'next'.
I get the 'Object Selection' screen that has a left and right panel. The left side is titled 'Available' and the right side is titled Selected.
The 'Available' panel had the directory in Linux (/etl/datafeeds/dev) where our data files are stored with a plus sign next to it.
When I click the plus sign, I get an error message that says:
API2836: Directory
/etl/datafeeds/dev does not exist.Has anyone seen this? What is the work around? Is it a bug? How do I import a data file into OWB if this isn't the way to do it?
Thanks,

Hi, is there any obligation to use import wizard?
can you use right click and import view/table?
Ugur MIHCI
www.ifslibrary.com

I can't get the album info when I'm trying to import songs from a cd. Any Help?

When I click on advanced-get track names it says Server Error. And when I import anyways and go to library and try to get info again it says can't connect to gracenote database or cddb is not available for some of these items. Which I know is not true because they are not hard to find cd's or whatever. I try with a few other cd's and still nothing same problem. What do I do? Reinstall Itunes or what?

Hi there,
I have included a couple of article below that should cover the process for importing the CDs and then syncing those to your iPhone. I would recommend reviewing it thuroughly as a lot has changed in iTunes 11.
iTunes 11 for Windows: Import songs from CDs
http://support.apple.com/kb/PH12486
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
-Griff W.

How do I stop CD's disappearing when i am trying to import

When I try to import a CD into iTunes
1 the CD shows up on the desktop as audio CD
2 iTunes goes off and queries Gracenote and downloads the track details which flash up in iTunes
3 suddenly the disk disappears from the desktop and cannot be seen as mounted in either Finder or iTunes so I can't get it out
4 I have to restart OSX and then the CD reappears and can be successfully dragged into iTunes but this is all rather tedious
Is this a Leopard or new iTunes problem - or something else

I want to put in my 2 cents as well in hopes that Apple will start to notice this based on the number of people that are posting the problem. I am having the same problem, which I will describe as well as to what I have seen. I have iTunes open already and insert an audio CD. It appears briefly on the desktop as "Audio CD" and then iTunes accesses information on the CD from the web. It then looses the information and the disk and the CD unmounts completely in the finder. I am certain of the timing, as one CD I inserted had multiple different possible matches found and when I chose one, it unmounted as soon as I chose the right item from the the dialog box. It happens sporadically with no pattern that I can see. Some disks work and others do not. I have been keeping Disk Utility open and when it happens, I just click on the CD in there and click on "Mount Disk" and then iTunes proceeds to import it just fine and then ejects it, as I have set the options. It started to happen after I upgraded to Leopard and also iTunes 7.5. I don't think I tried to import anything between doing those 2 updates.

Itunes continues to freeze when i am trying to import my music. I have rough 600gb of music and it continues to freeze on processing album artwork

When trying to import my music (about 600gb worth) itunes keeps freezing on processing artwork. Any ideas on how to maybe bypass the art work? or anything to keep this from happening.

I had the same a long time ago, and the reason why it happened to me was of 1 corrupt mp3 file.
I imported the files in batch (but maybe this will take to long with 600gb of music files) and then found the corrupt mp3 file, after I repaired it with Mp3val everything was alright again

Getting Error ID 4625 when one service tries to access a shared path on another machine

Hi guys .. I have a scenario where there are two machines involved, both of which are using
Windows Server 2008 Standard. One is called the IS Server (has IP 10.1.1.89 and machine name bxtwmistv1) and the other is called the
MWS Server (has IP 10.1.1.88 and machine name bxtwmmwstv1). They are both part of the
infosix.root domain. Their users are also part of this domain. On the IS server, there is a drive, R:\, which is shared on the network through the UNC path
\\bxtwmistv1\R. On MWS server, there is a service called
MWS Service, which is supposed to access that shared folder \\bxtwmistv1\R. The MWS service is running using a domain username to start itself:
[email protected] On the IS server, I have given Full Control rights for the domain user [email protected], for the shared drive.
However despite doing all the above, MWS service is unable to access the shared folder, and when it tries to access it, I get the following error on IS Server's Event Viewer:
An account failed to log on.
Subject:
Security ID:
NULL SID
Account Name:
Account Domain:
Logon ID:
0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID:
NULL SID
Account Name:
svcWebDev
Account Domain:
bxt1
Failure Information:
Failure Reason:
Unknown user name or bad password.
Status:
0xc000006d
Sub Status:
0xc000006a
Process Information:
Caller Process ID:
0x0
Caller Process Name:
Network Information:
Workstation Name:
BXTWMMWSTV1
Source Network Address:
10.1.1.88
Source Port:
55768
Detailed Authentication Information:
Logon Process:
NtLmSsp
Authentication Package:
NTLM
Transited Services:
Package Name (NTLM only):
Key Length:
0
I've tried my best to try and figure out what's wrong here, but I can't. Can someone tell me what might be the problem ?
Also, I tried logging into the MWS Server using the [email protected] domain user account (which the MWS service is using to start itself), and I was able to access the shared folder, and write to it as well.

According to the post of the error, the wrong domain name is specified for the service:
Account For Which Logon Failed:
Security ID:
NULL SID
Account Name:
svcWebDev
Account Domain:bxt1
But you said the accounts were: "They
are both part of the infosix.root domain"
Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years.

Error FRM 0008 when it's trying to import universe to BOE XI R2 repository

Similar Messages

Maybe you are looking for