Error from BAPI_ALM_CONF_CREATE - "YOU HAVE NO AUTHORIZATION FOR T-CODE"

Hi guys.
I am getting an error message from the BAPI_ALM_CONF_CREATE with the DETAIL_RETURN returning "You have no authorization for the t-code".
The error is arising from the form AUTH_CHECK_TYPE.
AUTHORITY-CHECK OBJECT 'C_AFKO_ATY'
ID 'ACTVT' FIELD tmp_actvt
ID 'AUTYP' FIELD act_autyp.
Thanks in advance.

Hi,
This might be beacuase you do not have authorization to that Tcode.
Go to SU53 tcode and check authorizations You have for your User name. Ask Basis people to provide authorization to the Tcode for your User id.
Regards,
Karuna

Similar Messages

You have no authorization for this transaction in plant: M7120

Hi guys.
I am getting the error message(M7120) "You have no authorization for this transaction in plant XXXX" when performing 101 movement for production order using MIGO.
/nsu53 doesn't return any object. Why?

Hello Arun,
It is a standard message. SU53 should show the exact authorization object which has been blocked. Or you can also try to check this with T code ST01.
Refer the below threads & seek help from your basis consultant to get this resolved.
Authorisation missing
authorization error in mbbs transaction | SCN
Regards
Mangesh S

BPS You have no authorization for the requested data

We are implementing Hierarchy node based security for our BPS.
When the user tries to display the planning layout, they get the error message "You have no authorization for the requested data "
I have given authorization to the relavant Infocubes, also checked the all the Authorization Relavant Info Objects and added theses Info Object to the custom authorization created in RSECADMIN.
Also added the info objects 0TCAACTVT, 0TCAIPROV, 0TCAVALID to the custom authorization.
In pfcg, this authorization has been added to S_RS_AUTH. I have also given activity 02, 03, 16 values and a * to planning areas, functions, packages, groups, levels, folders, ... to the objects R_AREA
R_BUNDLE
R_METHOD
R_PACKAGE
R_PARAM
R_PLEVEL
R_PM_NAME
R_PROFILE
But still we get the same error.
Has anyone encountered this problem? Can you please provide me some clues to resolve this issue

Thank you very much Grevaz, but that template does not help.
I did run both ST01 trace and BI RSECADMIN trace. RSECADMIN Trace shows the below authorization failure
Subselection (Technical SUBNR) 1
Supplementation of Selection for Aggregated Characteristics
No Check for Aggregation Authorization Required
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Quantity
Characteristic Contents
0FUNDS_CTR
0TCAACTVT
SQL Format:
FUNDS_CTR BETWEEN '4012001000'
AND '4012001999'
AND TCAACTVT = '03'
Characteristic Contents
0FUNDS_CTR Node 1 I EQ #
I EQ :
0TCAACTVT I EQ 02
I EQ 03
Partially Authorized (Average)   Characteristic Contents
0FUNDS_CTR
0TCAACTVT
SQL Format:
FUNDS_CTR > '4012001000'
AND FUNDS_CTR <= '4012001999'
AND NOT FUNDS_CTR IN ('4012001001','4012001002','4012001003','4012001004','4012001005','4012001006','4012001007','4012001008','4012001009','4012001010')
AND TCAACTVT = '03'
Value selection partially authorized. Check of remainder at end
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Quantity
Characteristic Contents
0FUNDS_CTR
0TCAACTVT
SQL Format:
FUNDS_CTR > '4012001000'
AND FUNDS_CTR <= '4012001999'
AND NOT FUNDS_CTR IN ('4012001001','4012001002','4012001003','4012001004','4012001005','4012001006','4012001007','4012001008','4012001009','4012001010')
AND TCAACTVT = '03'
Characteristic Contents
0FUNDS_CTR Node 1 I EQ #
I EQ :
0TCAACTVT I EQ 02
I EQ 03
Not Authorized
All Authorizations Tested
Message EYE007: You do not have sufficient authorization
No Sufficient Authorization for This Subselection (SUBNR)
Following CHANMIDs Are Affected:
206 ( 0FUNDS_CTR )
Authorization Check Complete
We have created custom authorization and trying to restrict based on hierarchy node.
One point I observed is, when I give access to all nodes with a wildcard * in the custom authorization, then the error disappears and the layout is visble. But our point here is to try to restrict based on the nodes and we cannot give display access to all nodes.

You have no authorization for the requested data. Message no. UPC217

Hi All,
When i execute a BPS planning function i am getting the following error.
'You have no authorization for the requested data. Message no. UPC217'
Plz let me know how to rectify the problem asap.
Thank you all in advance
Kiran

Hello,
Your Function/level makes use of an authorization relevant InfoObject without restriction (or at least no restrictions enough).
Check that the Level is restricted correctly regarding the authorizations.
regards,

You have no authorization for Cont Acct Cat. 02

Hi Experts,
When creating a Contrat Account CAA1, I face the following error:
You have no authorization for Cont Acct Cat. 01.
Where can I get granted to this Contract Acct Cat.
I try solving this issue by created my own Cont Acct Cat. 02. But the issue still ramain unsolved.
Can you please assit with ?
Thanks in advance,
Tierno

Hi,
This is a Security set-up issue.
I would suggest doing an SU53 screen dump after you get this error.
Then send the screen dump to your Basis Security person. They should be able to decipher the Security violations and authorisation objects etc.
Regards,
Ivor M.

Hi guys, I have a problem with my new macbook pro 15". I tried to updtate the apps (iPhoto, iMovie and Garageband), but an error was displayed "You have updates available for other accounts". I don't have other accounts!!! :(

Hi guys,
I have a problem, I have a new macbook pro. I updated the software without problems; then I tried to update iPhoto, iMovie and Garageband, but an error was displayed "You have updates available for other accounts". I don't have any other account, i tried everything found on the net but nothing seems to work...Please help me!!!!

Same thing for me it writes "To update this application, sign in to the account you used to purchase it."

You have no authorization for the requested data

Hi Gurus,
While trying to display data in manual layout it shows the erros as
You have no authorization for the requested data.
Any reason behind that.
Thanks,
Debasish

Hi Debasisha
I faced the same problem yesterday, as Ivan told apply the transaction code rssm. In Business Information Warehouse Authorizations window go to checks for InfoProvider and select your Cube and click the change button. in that window you can see the which infoobjects are selected under switched on column deselct the checkboxes for authorization obj. save - refresh
and go to BPS screen execute your layout you can find your layout. I solved my problem like that.
Hope it helps you.
Regards,

TS3694 I just received the unknown software error (6) do you have a resolution for this issue? Occurred after install of software and firmware in the final validation phase. I have a 4S

I just received the unknown software error (6) do you have a resolution for this issue? Occurred after install of software and firmware in the final validation phase. I have a 4S

http://lmgtfy.com/?q=iPhone+error+code+6

Error when Executing the Report - No Authorization for Multiprovider

Hello Experts,
After the upgrade has carried out in my Quality system, I'm unable to execute a query because of the authorization issue with Multiprovider. But earlier the same Authorization was assigned to the my ID.
The Role in Q and the Role in P is same. Right now P is with 3.1 and Q is with BI7.
In both the system I have the same Role. But in Q it says that: Error You have no Authorization for Multiprovider XXXX
This is happening for only one Multiprovider in Quality system. There is no change in the Multiprovider from earlier structure to the present structure.
Can anyone give me any idea as to how to solve this issue?
Many thanks in Advance..
Thanks
Raman.. This is Emergency for me..

Ok,
Pick up a test user (or your user) and go to transaction su01.
Check the roles that are assigned.
Double-click in each one and choose display. Go to tab authorizations and click on the glasses icon of displaying authorizations data. Then go to menu->Utilities->Technical names On.
You should see the tree with the node name Business Information Warehouse (technical name RS), if you don't see this in this role, than the issue it's not in this role, go back to su01 and check another role the same process until you find this node.
If you expand this node you'll see another nodes, one of them is called Data Warehousing Workbench - InfoCube (technical name S_RS_ICUBE). And you probably can't find another node called Data Warehousing Workbench - MultiProvider (technical name S_RS_MPRO), this is the new node you want.
In the node S_RS_ICUBE expand it and you'll see the authorizations given to InfoCubes with activity, InfoArea and InfoCube. In the older system BW 3.x this object was used to give access to InfoCubes, but also to MultiCubes. So you have to find the role that has this object with InfoCube with the value of MultiCube or with all values, for example, you could have this node in your role with the following values:
Activity                       03
InfoCube Subobject     DATA
InfoArea                     ZFI*
InfoCube                    ZFIAA_C11, ZFIAA_C13, ZFIAA_M02
or with:
Activity                       03
InfoCube Subobject     DATA
InfoArea                     ZFI*
InfoCube                    *
or with:
Activity                       03
InfoCube Subobject     DATA
InfoArea                     ZFI*
InfoCube                    ZFI*
Something like that. The first example give access to specific InfoCubes and one MultiCube, the second one you'll have all the InfoCubes and MultiCubes inside the InfoArea started with name ZFI and the third one you'll have all InfoCubes and all MultiCubes started with name ZFI that belongs to the InfoArea started with name ZFI also.
Got the picture?
So in BI 7 MultiCubes are now controlled by the new object S_RS_MPRO instead of the older object S_RS_ICUBE. What you should do is go to transaction pfcg and insert the role you want to include (or change these new values, i.e., the role that has the access to the MultiCube values inside the object S_RS_ICUBE which the query is built on) the new object S_RS_MPRO and click on change. Go to tab authorizations and click on change authorization data. Then click on manually (ctrlshiftF9) and insert the object S_RS_MPRO. Inside this new object you should insert the authorization data for accessing your multiproviders.
In the 3 examples above you should create these 3 entries:
Activity                          03
InfoArea                         ZFI*
MultiProvider                  ZFIAA_M02
MultiProvider Subobject DATA
or with:
Activity                          03
InfoArea                        ZFI*
MultiProvider                  *
MultiProvider Subobject DATA
or with:
Activity                         03
InfoArea                        ZFI*
MultiProvider                 ZFI*
MultiProvider Subobject DATA
Therefore you continue to have the object S_RS_ICUBE to control only the InfoProviders plus the new object S_RS_MPRO to control the MultiProviders.
Now generate the profile(s), save the role(s) and test it again!
Diogo.

Accessing RSA1 issueYou have no authorization for basic types (activity 01)

We are experiencing the following issue with RSA1
While accessing this it comes back with error
You have no authorization for basic types (activity 01)
This was working before and no authorizations got changed. Appreciate your feedback.

Hi,
This is realted to authorizaion problem. please contact your basis team.
Assign points if it helps.
Cheers,
Malli.

For my user id, I have the authorization for the transaction, but still iam getting the error that, you don't have authorization, plz suggest?

Hello ,
For my user id, I have the authorization for the transaction, but still iam getting the error that, you don’t have authorization, plz suggest?????
Thnks

Hello Sampath,
after you have received the error message about the no authorization, run transaction SU53.
This transaction shows which authorization has failed last time.
Best regards,
Laszlo

Can't update Xcode – "You have updates available for other accounts" and other errors.

I have 2 Macs, a 2008 Mac Pro running 10.8.5 and a 2009 MacBook Pro running 10.9.0, soon to be downgraded to 10.8.5. I can't install the Xcode update on either Mac, and I can't update MacTracker on my Mac Pro, which suggests that no updates work at all.
When I try to update, it says "You have updates available for other accounts" and "Sign in to ________ to update applications for that account." I'm already signed into that account. I tried logging out, closing the App Store, and logging back in. Then I tried logging out of both the App Store and iTunes as per a fix I found online, and it gave me "Unknown error" once I tried to update.
Is there a fix for this or at least a regular .pkg I can just install? Honestly, it's easier to update stuff in Debian Linux than on OS X 10.8 and up now.

Please try each of the following steps you haven't already taken, until the issue is resolved. After each step, relaunch the App Store and try again.
1. Follow the instructions in this Apple Support article.
2. If any App Store purchases were made under a different Apple ID, or if the bundled iLife applications were accepted under a different ID, sign in to the App Store with that ID to update.
3. Alternatively, delete the probem applications and re-download them with the ID you're using now. If you haven't already purchased them with that ID, you'll have to do that first, because purchases can't be transferred from one account to another.
4. Select the Purchased tab in the App Store window. If you see an item in the list marked "You have 3 apps to accept," click Accept.
5. Triple-click anywhere in the line below on this page to select it:
/Library/Caches/com.apple.appstore/adoption.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window may open with a file selected. If it does, delete the selected file. You may be prompted for your login password.
Then repeat step 4.
6. Select
Store ▹ View My Account
from the App Store menu bar, then select View hidden purchases. If you're trying to update any hidden purchases, unhide them.
7. Launch iTunes and select
Store ▹ Authorize This Computer
from the menu bar.
8. If you've moved any App Store apps out of the Applications folder, or into a subfolder, put them back. Never move or copy those applications. If you have backup copies of the apps on another volume, unmount it and try to update again.
9. Contact Account and Billing Support.

Can't dowload new OS this error comes up. "You have updates available for other accounts" Anyway of getting around this or fixing issue ? I logged myself as new admin with my apple id already.

bought a used mac book and can't dowload new OS this error comes up. "You have updates available for other accounts" Anyway of getting around this or fixing issue ? I logged myself as new admin with my apple id already.
the guy i bought it from told me he would take car of any issues and of coarse the first one that comes up he hasn't been helpful at all.
anyway of updating or is there something i did wrong or haven't done as far as switching ownership with apple id and admin.
thxs

Boot into Internet Recovery and erase the hard drive, then reinstall the OS.
That will install the original OS that the Mac shipped with. You can then register it under your AppleID and upgrade to Mavericks.
http://support.apple.com/kb/ht4718

Do you have a fix for error 7 windows error 193 for itunes

Do you have a fix for error 7 (Windows error 193) when I try to open my itunes? I have uninstalled, reinstalled. Still does not work

Since you weren't able to deactivate your software before the hard disk crashed, you'll need to get assistance from our support staff. You can contact them through chat at http://www.adobe.com/support/contact/?issue=myOptions_activate
Be sure to have whatever serial numbers you have on hand (and make sure to register them).

Getting error "You have insufficiant priviliges for the current operation"

Hi,
we are calling one seeded self service page from one custom self service page. But it is showing error like *"You have insufficiant priviliges for the current operation. Pls contact your system administrator."* Pls advice how to resolve this issue.
Thanks in advance,
Hanimi.....

Hanimi
This can be possible that in the instance in which it is working, In that the user with which you are testing the page is having access to that particular responsibility to which this page is attached.
So try to assign this page's responsibility to your user and try again.
Thanks
AJ

Error from BAPI_ALM_CONF_CREATE - "YOU HAVE NO AUTHORIZATION FOR T-CODE"

Similar Messages

Maybe you are looking for