Error from bex query while executing in portal

Dear Experts,
while executing the query bex analyzer, is working ok but the same query when executing in portal is throwing the following error:
error message:
The initial exception that caused the request to fail was:
Termination message sent
ABEND RS_EXCEPTION (000): The argument '0,01' cannot be interpreted as a number
  MSGV1: The argument '0,01' cannot be interpreted as a
  MSGV2: number
Messages
ABEND: The argument '0,01' cannot be interpreted as a number
ABEND: An exception with the type CX_SY_CONVERSION_NO_NUMBER occurred, but was neither handled locally, nor declared in a RAISING
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
I tried to find from existing blogs but did not get suggestions for similar issue.
Coud some be kind enought to analyse this error.
Inputs will highly been appreciated
Thanks in advance,

Hi,
Here I tried retransporting the depended bex queries accross the landscape.
Now the reports are OK from the Portal.
Thanks,
Mannu

Similar Messages

  • Settings for SAP Portal start page from BEx Query Designer

    Hi!
    In order to see queries I would like to use SAP Enterprise Portal from BEx Query Designer.
    When I push "execute" button within BEx Query Designer a wrong page will be shown in browser.
    I changed the settings in table RSPOR_T_PORTAL, but still get the wrong Portal page shown in browser.
    Question:
    What is the transaction/table/report to customize the portal start page using by BEx Query Designer?
    Thank you very much!
    regards
    Jürgen

    Hi Anton?
    Many thanks for your reply.
    But I mentioned that I changed the URL within table RSPOR_T_PORTAL and this does not help...
    Do you speak Russian? Me too
    Can you also help me with the following problem?
    Hi!
    I am about to implement SAP Best Practices scenario "B34: Accounts Receivable Analysis".
    Therefore I load the data from SAP ERP IDES system into SAP NetWeaver 2004s system.
    My problems are:
    when I try to load the transaction data for Infosources 0FI_AR_4 and 0FI_AR_6 from SAP ERP system the following happens:
    - the status is getting u201Cyellowu201D (194 from 0 records)
    - at the next day the status is getting u201Credu201D and I received the following error:
    Errors while sending packages from OLTP to BI
    Diagnosis
    No IDocs could be sent to BI using RFC.
    System Response
    There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
    Further analysis:
    Check the TRFC log.
    You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
    Error handling:
    If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
    Comment:
    I did not find any entries on "Environment -> Transact. RFC -> In source system"
    The Source system connection EC6CLNT100 is OK
    Can some one help me to solve this problem?
    Edited by: Jgen Pfeiffer on Feb 5, 2009 12:48 PM

  • Facing prolem  in Dashboard 4.1, while fetching data from Bex Query

    Hi Exports,
    I am facing an error message  " Failed to (de-)serialise data. (Xsl 000004)"  while fetching data in Dashboard from Bex Query.
    The query is getting connect. while drag n drop some dimensions and measures then going for Refesh or Run Query, geting this error.
    The same query is working fine with other comp like webi n crystal.
    Anybody having solution for this please let me know. I am stuck somewhere.
    Thank You

    Hi,
    Check the data in the infoProvider.Reduce the  Bex query Characteristics & Key figure fields.Try to identify due to which characteristsic adding in Bex Query ,are you facing the issue.Check that characteristic data in the infoProvider.
    Regards,
    Venkat

  • Bex query designer -- Execute Error

    Hello,
    when i am executing the Bex query designer -- > Execute. i am getting the following error.
    Service not attainable
    What has happened?
    The call of the URL http: // fe-pit-ttbw.company.com:8000 / irj/servlet/prt/portal/prtroot/pcd! 3aportal_content! 2fcom.sap.pct! 2fplatform_add_ons! 2fcom.sap.ip.bi! 2fiViews! 2fcom.sap.ip.bi.bex it was broken off, because the appropriate service is not available.
    Indication
    The demolition appeared on the system PIT and with the fault code 404 and the reason trouble(need) found. The selected virtual Host was 0.
    What can you do?
    Please, choose a valid URL. If you still dispose of no user's identification, you address your system administrator.
    Fehlercode:ICF-NF-http-c:000-u:SAPSYS-l:D-i:rb3pnk2_PIT_00-v:0-s:404-r:Notfound HTTP 404 - trouble(need) found your Internet SAP Communication Framework team
    Edited by: Ranga123 on Aug 5, 2010 1:14 PM

    hi
    have u checked if web service is active to open the report in web?
    use T-Code SICF
    also check if portal is up or not.
    also check below post:
    [SICF service - error code 404;
    Edited by: Gaurav on Aug 5, 2010 2:01 PM

  • BEx Query Designer - Execute pops up blank Internet Explorer session

    Hi gurus,
    From BEx Query Designer, I choose Execute, and it pops up a blank Internet Explorer window rather than the query.  It says about:blank in the URL and the page is white.
    I read some posts that say to run RSPOR_SETUP, but I don't have a Java system or Portal system so does that still apply to me?  I want the URL that pops up to point to the BW system which is an ABAP system.
    E_URL_PREFIX                    http://BWSAPF00.mydomain.com:8100
    E_URL_PATH                      /sap/bw/BEx
    E_URL_PROTOCOL                  http
    E_URL_SERVER                    BWSAPF00.mydomain.com
    E_URL_PORT                      8100
    E_SUBRC                         0
    Warm Regards,
    CM

    Hi,
    Please note that Java stack is mandatory for running Queries in web side
    or for executing the Queries using Transaction RSRT -> Java Web or
    for executing the Queries using Query Designer in Release 7.x .
    So, please install Java stack and use BI Java components for running
    Queries in web side here.
    Also, please refer the following note for details:
    917950 - SAP NetWeaver 2004s: Setting Up BEx Web
    Also keep a note of the following:
    Please check the following link:
    http://help.sap.com/saphelp_nwpi71
    /helpdata/en/45/61d5aaa0546628e10000000a1553f6/frameset.htm
    "With SAP NetWeaver 7.1, the Visual Administrator (VA) is replaced by
    the SAP NetWeaver Administrator, that is, all relevant functions of
    the VA are available in the SAP NetWeaver Administrator.
    The VA is no longer delivered as of SAP NetWeaver 7.1.  "
    The interface is a little bit different now, but the installation
    steps still follow the same logic as SAP NetWeaver 2004s.
    You can use manual steps to set up integration as per note 917950.
    Also, please don´t use report RSPOR_SETUP for configuration check
    between ABAP and Java for SAP NetWeaver 2004s.
    The report has been replaced by the support desk tool.
    Please have a look at note '937697 - Usage of
    SAP NetWeaver BI Diagnostics & Support Desk Tool'
    RSPOR_SETUP is obsolete in BI 7.x release and Supportdesk tool should
    be used in 7.x release.
    Also refer the following notes:
    1512988 - Frequently Asked Questions:BI Java 7.30 SP's/patches
    1512356 - Patches for NetWeaver 7.30  BI Java Support Package
    1506722 - Generic Note for BI Java Patches and Support Packages
    And, please note that Patch Level 0 is not supported for  BI Java components as per the following note:
    1789842 - Patch Level 0 for BI Java Installation
    Please do look at the note 1789842 for details.
    Please check the Support Desk Tool as per the note 937697 and if you find
    any RED signals in the file systeminfo.txt included in the file
    supportdesk.zip, please correct it as per the Solution mentioned
    there and check if it helps.
    Thanks & Regards,
    Sapna
    Message was edited by: Sapna J Gurudutt

  • BEx Query output in Enterprise Portal using "Information Broadcasting"

    Dear Experts,
    I am having BEx Query output in Enterprise Portal
    EP 6.0 and BW 3.5 version
    I am trying to send email attachments from
    Portal Query directly
    using "Information Broadcasting"  tab button
    ==================================
    Email gets triggered Okay,
    but Portal URL link is not showing correctly
    Here is an Online Link to the BI Document: http://mtv01spbw01.businesssap.com:8100/sap/bw/BEx?CMD=LDOC&INFOCUBE=0CRM_OPPH&QUERY=0CRM_C04_TESTQ001
    <b>The URL above is coming wrongly,
    I want it to point to
    http://mtv01spbw01.businesstree.com:8000/sap/bw/BEx?CMD=LDOC&INFOCUBE=0CRM_OPPH&QUERY=0CRM_C04_TESTQ001</b>
    Please help me to correct this error / wrong configuration
    any help links would also be appreciated
    Thanks,
    Aby Jacob

    Hi Jacob,
    Here, p/s refer to this links.
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm</a>
    <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm</a>
    OSS Notes : 760775
    Hopefully it can helps you a lot.
    Many thanks.
    Regards,
    Niel.
    (Many thanks for any points you choose to assign).

  • Unable to run query from BEx query designer

    Hello,
    I am connecting remotely to clients environment. I am not able to run query from Bex query designer. System generates IE window with URL
    http://server.com:50300/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCOPCM02_Q017&VARIABLE_SCREEN=X&DUMMY=9
    but query result isnt shown.
    Internet Explorer cannot display the webpage.
    What kind of setting do I need to change to get query working?
    thanks

    Hi Comandante,
    If you are not able to Execute the Query using Query designer, you can also execute the query using RRMX  or RSRT transaction for now until the issue with the query designer is solved ..
    Hope it helps!
    Regards,
    Pavan

  • RRI?  How to call ITS URL and pass field value from Bex Query.

    I am doing RRI from query to webaddress,
    i have defined jump(report type: webaddress and reicver report as url) from shopping cart bex query(SRM ) to webaddres.
    here url is SRM ITS base link for monitoring shoppingcart(http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN).
    jump is working from portal(from bex query ivew).
    but i want to pass value(shopping cart value) to above url and want to skip first screen.
    i have maintained assignment detail by assigning field name against shopping cart infoobject with type url parameter, but its not directly call reciver url with given input field.
    i tried the diffrent combination of url and field assignment as like below:
    1: web address url:http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN
    assigned field: GS_HEADER-OBJECT_ID
    but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
    http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN?GS_HEADER-OBJECT_ID='selected number value'
    2: web address url:http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc
    assigned field: flNUQVRFPTgzMTcuMDAyLjAxLjAx
    but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
    http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc?flNUQVRFPTgzMTcuMDAyLjAxLjAx='selected number value'
    I have seen the source code of that url(inital screen and after entring the value to that screen) too.
    how to call webadress(SRM ITS base shopping cart URL) with passing the one of field value of that url screen?
    Thanks and regards,
    Dushyant.

    Declare the gv_orderid in modulepool program.
    And Declare the parameter as import parameter in smartform.
    CALL FUNCTION  lv_form
       EXPORTING
    *   ARCHIVE_INDEX              =
    *   ARCHIVE_INDEX_TAB          =
    *   ARCHIVE_PARAMETERS         =
    *   CONTROL_PARAMETERS         =
    *   MAIL_APPL_OBJ              =
    *   MAIL_RECIPIENT             =
    *   MAIL_SENDER                =
    *   OUTPUT_OPTIONS             =
    *   USER_SETTINGS              = 'X'
         i_input                    =  gv_orderid
    * IMPORTING
    *   DOCUMENT_OUTPUT_INFO       =
    *   JOB_OUTPUT_INFO            =
    *   JOB_OUTPUT_OPTIONS         =
    * EXCEPTIONS
    *   FORMATTING_ERROR           = 1
    *   INTERNAL_ERROR             = 2
    *   SEND_ERROR                 = 3
    *   USER_CANCELED              = 4
    *   OTHERS                     = 5

  • Lsmw error 'Specify Files first' while executing option 'Read Data'.

    Hi All,
    while trying to create mass users through LSMW, i am gettign the error 'Specify Files first' while executing option 'Read Data'.
    I have specified file (.txt), manually created (with'1 tab space' between each term). i have used option 'On the PC(Frontend)'. No error while saving.
    Next- i have executed 'Assign Files', where the file appeared automatically.
    Next- Here, when i try to execute 'Read Data', i get the error 'Specify Files first'.
    Can anyone help in resolving this error.

    Hello Plaban,
    What is your purpose? Are you tring to upload the data with more file variant?                                                                               
    There are two possibilities to make file names more variable:                                                                               
    1.If you choose system dependent file names by setting the according flag (in the first step 'Maintain object attributes'), you can define file names for each system in step 'Specify files' by assigning the files to a specific system ID (with a double-click on the specified file).                                                                               
    2.You can use wildcards in the file names where you can assign several values.                                                               
    I hope this helps you.
    Regards,
    Blanca

  • Calling ABAP report from BEx query

    Good day!
    I want to call ABAP report from BEx query by right-clicking on the field and using context menu. I know that transaction RSBBS is used (sender-receiver connecting), but I don't know how to transfare data to ABAP program
    In ABAP program I want to know at least data from those cell in BEx query, that was right-clicked.

    Depending on your requirement and environment, you have the following options:
    1. Use an info spoke and make selections as you would in a query.
    2. USe FM RS_VC_GET_QUERY_VIEW_DATA_FLAT to send the data to a file and your ABAP can read this file.
    Ravi Thothadri

  • Error from ejbc: Compiler failed executable.exec

    Hi all,
    I am using weblogic server 8.1 and encounter an error when I build my project, could anyone give me a helping hand? Thank you.
    This is my Configuration:
    Application Type: Empty Application
    Project Type: EJB Project
    Project Name: LibraryEJBProject
    DataSource: LibraryDataSource using cgPool
    Table: Library_Book under Schemas\Weblogic\Tables of pointbase server
    EJB name: BookBean.EJB under LibraryEJBProject\book
    When I right click LibraryEJBProject and click build, the following error comes out:
    ======================================================
    Build project LibraryEJBProject started.
    BUILD STARTED
    build:
    Created dir: C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build
    check-env:
    WARNING: Checking to see if there is anything new to build...
    Created dir: C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_ejb_crc
    no-ejbgen:
    run-build:
    clean-modules:
    removed module 'LibraryEJBProject.jar'
    WARNING: Running EJBGen...
    Loading source file C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\/wlw_LibraryEJBProject_build/../wlw_ejb_crc//ejbgentemp/Book\BookBean.java...
    Constructing Javadoc information...
    EJBGen 2.16
    [Info:] Creating C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\/wlw_LibraryEJBProject_build/../wlw_ejb_crc//ejbgentemp\Book\Book.java
    [Info:] Creating C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\/wlw_LibraryEJBProject_build/../wlw_ejb_crc//ejbgentemp\Book\BookHome.java
    [Info:] Creating C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\/wlw_LibraryEJBProject_build/../wlw_ejb_crc//ejbgentemp\META-INF\ejb-jar.xml
    [Info:] null [Bean] MAKE CLASS NAME G:BookHome P:Book N:BookHome
    [Info:] null [Bean] MAKE CLASS NAME G:Book P:Book N:Book
    [Info:] Creating C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\/wlw_LibraryEJBProject_build/../wlw_ejb_crc//ejbgentemp\META-INF\weblogic-ejb-jar.xml
    [Info:] Creating C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\/wlw_LibraryEJBProject_build/../wlw_ejb_crc//ejbgentemp\META-INF\weblogic-cmp-rdbms-jar.xml
    [Info:] Creating C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\/wlw_LibraryEJBProject_build/../wlw_ejb_crc//ejbgentemp\ejbgen-build.xml
    post-ejbgen:
    clean-ejbc:
    Copying 7 files to C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build
    WARNING: EJBGen ok. Compiling...
    runjavac:
    Compiling 3 source files to C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build
    WARNING: All files compiled. Running ejbc...
    <Dec 3, 2004 12:18:44 PM CST> <Warning> <EJB> <BEA-010212> <The EJB 'Book(Jar: C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build)' contains at least one method without an explicit transaction attribute setting. The default transaction attribute of Supports will be used for the following methods: local-home[createQuery(), remove(java.lang.Object), findByPrimaryKey(java.lang.Integer), create(java.lang.Integer)] local[getBookID(), getIsbn(), getName(), setPublisher(java.lang.String), getPublisher(), setAuthor(java.lang.String), setBookID(java.lang.Integer), remove(), setIsbn(java.lang.String), getAuthor(), setName(java.lang.String)] >
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:76: cannot resolve symbol
    symbol : class BookBean
    location: interface Book.Book
    public final class Book_5wlu3i__WebLogic_CMP_RDBMS extends Book.BookBean
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:760: cannot resolve symbol
    symbol : class Book_5wlu3i_Intf
    location: interface Book.Book
    Book.Book_5wlu3i_Intf beanIntf)
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i_Intf.java:39: cannot resolve symbol
    symbol : class Book_5wlu3i_Intf
    location: interface Book.Book
    (java.sql.ResultSet rs, java.lang.Integer offset, Object __WL_pk, Book.Book_5wlu3i_Intf var)
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i_ELOImpl.java:15: cannot resolve symbol
    symbol : class Book
    location: interface Book.Book
    implements Book.Book, weblogic.utils.PlatformConstants, java.io.Serializable
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i_LocalHomeImpl.java:13: cannot resolve symbol
    symbol : class BookHome
    location: interface Book.Book
    implements Book.BookHome, weblogic.utils.PlatformConstants
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i_LocalHomeImpl.java:76: cannot resolve symbol
    symbol : class Book
    location: interface Book.Book
    public Book.Book create (java.lang.Integer arg0)
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i_LocalHomeImpl.java:101: cannot resolve symbol
    symbol : class Book
    location: interface Book.Book
    public Book.Book findByPrimaryKey(java.lang.Integer arg0)
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:244: cannot resolve symbol
    symbol : variable super
    location: class Book.Book_5wlu3i__WebLogic_CMP_RDBMS
    super.setEntityContext(arg0);
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:257: cannot resolve symbol
    symbol : variable super
    location: class Book.Book_5wlu3i__WebLogic_CMP_RDBMS
    super.unsetEntityContext();
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:269: cannot resolve symbol
    symbol : variable super
    location: class Book.Book_5wlu3i__WebLogic_CMP_RDBMS
    super.ejbActivate();
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:490: cannot resolve symbol
    symbol : class Book_5wlu3i__WebLogic_CMP_RDBMS
    location: interface Book.Book
    Book.Book_5wlu3i__WebLogic_CMP_RDBMS __WL_bean = null;
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:566: cannot resolve symbol
    symbol : class Book_5wlu3i__WebLogic_CMP_RDBMS
    location: interface Book.Book
    __WL_bean = (Book.Book_5wlu3i__WebLogic_CMP_RDBMS)__WL_pm.getBeanFromRS(__WL_pk, __WL_rsInfo);
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:763: cannot resolve symbol
    symbol : class Book_5wlu3i__WebLogic_CMP_RDBMS
    location: interface Book.Book
    Book.Book_5wlu3i__WebLogic_CMP_RDBMS __WL_bean = (Book.Book_5wlu3i__WebLogic_CMP_RDBMS)beanIntf;
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:763: cannot resolve symbol
    symbol : class Book_5wlu3i__WebLogic_CMP_RDBMS
    location: interface Book.Book
    Book.Book_5wlu3i__WebLogic_CMP_RDBMS __WL_bean = (Book.Book_5wlu3i__WebLogic_CMP_RDBMS)beanIntf;
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:922: cannot resolve symbol
    symbol : variable super
    location: class Book.Book_5wlu3i__WebLogic_CMP_RDBMS
    super.ejbLoad();
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:936: cannot resolve symbol
    symbol : variable super
    location: class Book.Book_5wlu3i__WebLogic_CMP_RDBMS
    super.ejbStore();
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:950: cannot resolve symbol
    symbol : variable super
    location: class Book.Book_5wlu3i__WebLogic_CMP_RDBMS
    super.ejbRemove();
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:1051: cannot resolve symbol
    symbol : class Book_5wlu3i__WebLogic_CMP_RDBMS
    location: interface Book.Book
    case 0: __WL_loadGroup0FromRS(rs, offset, __WL_pk, (Book.Book_5wlu3i__WebLogic_CMP_RDBMS)eb); break;
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:1167: reference to + is ambiguous, both method +(java.lang.String,java.lang.String) in and method +(java.lang.String,int) in match
    if(__WL_verbose) Debug.say("setting("+this+") 'author' using column " __WL_num ". Value is " + this.author);
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:1178: reference to + is ambiguous, both method +(java.lang.String,java.lang.String) in and method +(java.lang.String,int) in match
    if(__WL_verbose) Debug.say("setting("+this+") 'isbn' using column " __WL_num ". Value is " + this.isbn);
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:1189: reference to + is ambiguous, both method +(java.lang.String,java.lang.String) in and method +(java.lang.String,int) in match
    if(__WL_verbose) Debug.say("setting("+this+") 'name' using column " __WL_num ". Value is " + this.name);
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:1200: reference to + is ambiguous, both method +(java.lang.String,java.lang.String) in and method +(java.lang.String,int) in match
    if(__WL_verbose) Debug.say("setting("+this+") 'publisher' using column " __WL_num ". Value is " + this.publisher);
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:1663: cannot resolve symbol
    symbol : variable super
    location: class Book.Book_5wlu3i__WebLogic_CMP_RDBMS
    super.ejbCreate( arg0);
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:1702: cannot resolve symbol
    symbol : variable super
    location: class Book.Book_5wlu3i__WebLogic_CMP_RDBMS
    super.ejbPostCreate( arg0);
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:1847: cannot resolve symbol
    symbol : variable super
    location: class Book.Book_5wlu3i__WebLogic_CMP_RDBMS
    super.ejbRemove();
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:1907: cannot resolve symbol
    symbol : variable super
    location: class Book.Book_5wlu3i__WebLogic_CMP_RDBMS
    super.ejbLoad();
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:1938: cannot resolve symbol
    symbol : variable super
    location: class Book.Book_5wlu3i__WebLogic_CMP_RDBMS
    super.ejbStore();
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i__WebLogic_CMP_RDBMS.java:2072: cannot resolve symbol
    symbol : variable super
    location: class Book.Book_5wlu3i__WebLogic_CMP_RDBMS
    super.ejbPassivate();
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i_LocalHomeImpl.java:80: cannot resolve symbol
    symbol : class Book
    location: interface Book.Book
    return (Book.Book) super.create(md_ejbCreate_I,
    ^
    C:\DOCUME~1\NICHOL~1.LAB\LOCALS~1\Temp\wlw_LibraryEJBProject_build\Book\Book_5wlu3i_LocalHomeImpl.java:105: cannot resolve symbol
    symbol : class Book
    location: interface Book.Book
    return (Book.Book)
    ^
    30 errors
    ERROR: ERROR: Error from ejbc: Compiler failed executable.exec
    ERROR: ERROR: ejbc couldn't invoke compiler
    BUILD FAILED
    ERROR: ERROR: Error from ejbc: Compiler failed executable.exec
    ERROR: ERROR: ejbc couldn't invoke compiler
    ======================================================
    What would be the cause of the error, would it be related to the way I create the datasource and the table? Or other causes, please help. Thank you.
    Regards,
    Nicholas Lok

    It's difficult to tell solely by the messages. One there seems to be a problem finding a base class. One thing that I notice is that the package seems to contain 'book' with a lower case 'b' as in:
    EJB name: BookBean.EJB under LibraryEJBProject\book
    Whereas all the error messages are saying that they are having trouble finding something with a package name like 'Book' with a capital 'B'.
    Perhaps that is the problem, the package has to be consistently 'book' or 'Book' and can't be both.
    Hope I'm right and hope this helps.
    thorick

  • Error while connecting executing a webi report from Bex query.

    hi all,
    i need to create one webi report fron Bex query based on sab BW.
    But when I execute the query its shows "Unspecified error invoking method or accessing property "on change DocID"".
    i didnt get this msg.
    please help

    Hi Mohit Gupta,
    Degrade the java version to java 7 update 45 and also degrade the java security level to low from medium. Also delete the java temporary files and also clear your IE browser cache as well.
    This solved the issue for me.
    Thanks,
    Chaitanya Krishna

  • Error: No data available while executing BEx query

    Hi BI expert,
    Please help me out as I am very new in BI. I am getting error "No data available" after executing query in BEx query designer.
    thanks

    Hi,
    Pl check for the Filter Conditions of the query.Have the same filters data  as that in the Cube/ODS.
    Hw is the Data Flow ???
    A)From ODS to Cube to Query ????
    or
    B)From ODS
    or
    C)From Cube
    1)Check on which Infoprovider the Query is built.
    2)If it is Cube then Check the data in the Cube.Right click Cube ,Display data and Execute.
    3)If data is avaliable in cube then it shud come in Query except for the Filter conditions .
    4)then check for the Filter conditions of the query.
    5)If data is not avaliable in Cube then check in ODS ????
    6))If data is not avaliable in ODS then check in PSA
    7))If data is not avaliable in PFA then check in R/3.
    Also search in SDN as to how the Data flows
    A) both from Flat File and 
    B)R/3 and FULL and DElta Load.
    That will give clear uinderstanding  !!!!!
    Rgds
    SVU123
    Edited by: svu123 on Dec 15, 2008 2:15 PM

  • Error in BEx Web Application Iview in Portal

    Hello All,
    I am trying to access a query from the BI NW2004s (Ver 7.0)in EP 7.0 and i have created a BEx Web application Iview and have specified the proper Query/Template , but i am not able to preview the output on Iview and getting the following error in Iview
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    iView not found: com.sap.ip.bi.web.portal.integration.launcher.
    Exception id: 05:52_11/10/06_0006_17835450
    See the details for the exception ID in the log file
    Further to add is that when i access the same BI application using the URL Iview, it's wokring absolutely fine. Can somebody identify the problem with the BEx Web Application Iview and suggest a suitable remedy for the same??.
    Thanks in advance.
    Regards,
    Sarabjeet.

    Hello,
    You can download these components from Service Market Place (service.sap.com/swdc) and:
    Download -> Support Packages and Patches -> Entry by Application Group -> "Support Packages and Patches" -> "SAP NetWeaver" -> "SAP NETWEAVER" -> "SAP NETWEAVER 2004S" -> "Entry by Component" -> "BI Java":
    BI BASE SERVICES 7.00
    BI WEB APPLICATIONS 7.00
    You have to download the SP that equals your APAP SP.
    Normally, these SCAs will be installed with installation of "BI Usage Type" of the J2EE engine.
    Regards, Karol Kalisz
    SAP BI Development

  • Bex Query designer withour Enterprise Portal?

    Dear BW experts,
    After launching the Bex Query designer with BI7 system. After designing query, If I click on execute (Ctrl+R). It is launching internet explorer with error "Invalid Syntax error - Page cannot be displayed"
    It is launching the following URL
    http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCCQ20071048070001&VARIABLE_SCREEN=X&DUMMY=1
    I think it is looking for Enteprise Portal server. I dont have an EP server.
    What is the alternate way to execute this?
    Thanks in Advance...

    Hello to all of you,
    just to make sure that I do not missunderstand:
    As far as I know in BW3.5 (without EP installed) you were able to execute a query directly out of the query designer and it was shown as a web-query.
    Now I tried to do the same with a BI7-System the first time and I get the same symptom as Abdullah. We also do not have an EP installed on that system.
    As solution, you all describe that I have to open the query in analyzer to see it in excel - OK - BUT if I do not want to see it in excel but as a webquery (like in my good old BW3.5) instead ? Isn't that possible anymore ???
    Uwe

Maybe you are looking for