"Error from PSA" error message when loading InfoCube

Hi all,
I am getting the following error message when loading transaction data to an InfoCube.
***Error from PSA***
This is not MD or Hierarchies (like previous messages in the forum)
Please advise.
Thanks,
Miki

Hi Miki,
Before just loading data into the infocube. Catchup PSA table and see the data into it.
Then u may find the solution.
But as ronald said this shouldnot be the complete error statement.
bye.

Similar Messages

**** Error from PSA **** while loading 0comp_code (processing- info obejct)

Hi,
I am getting error **** Error from PSA **** while loading info object attributes for company code (0comp_code). I am not using oly info obejct in processing.
below is the error message.
Error from PSA ****
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Scheduler
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
I checked in SM37 in both source system and BW. I do not see any matches. I have tried loading other master data (for eg. customer) and all were successful. That clearly indicates that connection between ECC and BW systems correct (RFC connection, logical systems etc).
please advise.

Thank you for your answers and points assigned.
I am not using PSA in my data transfers i am using info object only option. I am also getting same error even if I use PSA . no change in error message.
when i click on psa in monitor. i am getting below error message.
-No data packet numbers could be determined for request.
detailed error message: (all are in red color)
Requests (messages): Errors occurred (RED)
      -Data request arranged (GREEN)
     - Error in the data request (RED)
Extraction (messages): Missing messages (RED)
        -Missing message: Request received (YELLOW)
       -Missing message: Number of sent records (YELLOW)
      -Missing message: Selection completed (YELLOW)
Transfer (IDocs and TRFC): Missing messages (RED)
Processing (data packet): No data (RED)
please advise and points will assigned. thanks for your help.

Firefox does not open at all - error message when loading firefox 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program in English

I cannot open firefox at all. I have removed and re-installed but it has made no differenct. I just get an error message when loading firefox - as follows - 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program.
Can anyone help me sort this out? If I log in as someone else Firefox works?
== This happened ==
Every time Firefox opened
== the computer shut down unexpectedly ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

You can o a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

Error msg when syncing ipad "The disk could not be read from or written to" when loading photos. Does anyone have any idea how to fix?

? I get an Error msg when syncing ipad "The disk could not be read from or written to" when loading photos. Does anyone have any idea how to fix?

You have posted in the Mac forum for problems & questions usting the iTunes store. You will probably find more help in the following forum.
http://discussions.apple.com/forum.jspa?forumID=800

While loading master data into PSA, the eorror is 'Error from PSA"

Hi All,
While loading master data into PSA, the eorror is 'Error from PSA"
Could you anybody please help in this reagard.
Thanx,
Sridhar.

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

Removal of error from psa

hi friends
can any one tell me how can we remove an error from psa
thanks in advance
with regards
kalyan

Hi,
   Using the Error Handling function on the Update Parameters tab page in the scheduler, you can control the behavior of the BI system if data records with errors occur in the data flow with 3.x objects (use of transfer and update rules) when you are loading data using the PSA.
The system checks for data records with errors:
      in the transfer rules
      in the update rules
      when data is updated to the master data tables, text tables, or hierarchy tables
      when data is updated to the InfoCube
      when checking for referential integrity within an InfoObject against the master data tables or DataStore objects on the communication structure level.
Features
Incorrect records arising in transfer rules, update rules, when updating to a data target, or when checking for referential integrity, are highlighted and returned to the error handler. The error handler locates the original PSA records and writes the corresponding log. This function is not yet available for updating to DataStore objects.
Using the Error Handling function on the Update Parameters tab page in the scheduler, you can control how the system responds to incorrect data records.
Activities
       1.      Define how the system should react to incorrect data records
a.       No update, no reporting (default)
If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. However, the system continues to check the records.
b.       Update valid records, no reporting (request red)
This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that have not been updated and manually releases the request (using a QM action, that is, by setting the Overall status on the Status tab page in the monitor).
c.       Update valid records, reporting possible
Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
With option a), the incorrect records are marked in red in the PSA maintenance. You can display the relevant error messages amodally, edit the records, and update the request manually. If it was not possible to write to the PSA (hierarchy or transfer method IDoc), an application log is written instead.
With options b) and c), a new request that is only updated to the PSA is formed from the incorrect records. Here you can edit the records of the new request in the PSA and start the update manually.
If errors arise when an InfoCube is updated, new requests are generated for incorrect records for each InfoCube combination. Among these requests, the incorrect records are updated to the PSA. These new requests have entered as data targets the InfoCubes for which there were incorrect records. If, for example, a record was updated to two InfoCubes by mistake, a request is generated for this record that contains both InfoCubes as data targets. In the PSA tree, the requests appear as successfully updated in the PSA. These new requests can then be triggered again for updating to the InfoCubes.
       2.      Specify the maximum number of incorrect data records that are allowed before the system terminates the load process. In the PSA, you can display the errors that have arisen up to that point. If you do not specify the maximum number of incorrect records after which termination should occur, the handling of incorrect data records is inactive and the update terminates after the first error.
       3.      Define how the BI system should react if the number of data records received by the BI system is not the same as the number of data records updated in BI.
A difference between the number of received and updated records can occur:
         in the transfer rules
         in the update rules
         when updating
Records are sorted, aggregated, or added.
If you set the No Aggregation Permitted indicator, the request is deemed incorrect if the number of received records is not the same as the number of updated records.
Regardless of this indicator, an error occurs if the number of selected records is not the same as the number of records received in the BI system.
Result
The monitor directs the user to the relevant error case and enables a direct navigation into the PSA or the respective error request.
If you want to continue processing the incorrect data records in a program that you have written yourself, you can use the method GET_ERRORS of class CL_RSSM_ERROR_HANDLER. The use of this method is documented in the RS_ERRORLOG_EXAMPLE.
To perform complex checks on data records, or to carry out specific changes to data records regularly, you can use delivered function modules (PSA-APIs) to program against a PSA table.
If you want to execute data validation with program support, select Tools ® ABAP Workbench ® Development ® ABAP Editor and create a program.
If you use transfer routines or update routines it may be necessary to read data in the PSA table afterwards.
Employee bonuses are loaded into an InfoCube and sales figures for employees are loaded into a PSA table. If an employees bonus is to be calculated in a routine in the transformation, in accordance with his/her sales, the sales must be read from the PSA table.
       1.      Call up the function module RSSM_API_REQUEST_GET to get a list of requests with request ID for a particular InfoSource of a particular type. You have the option of restricting request output using a time restriction and/or the transfer method.
You must know the request ID, as the request ID is the key that makes managing data records in the PSA possible.
       2.      With the request information received so far, and with the help of the function module, you can
         read RSAR_ODS_API_GET data records from the PSA table
         write RSAR_ODS_API_PUT changed data records in the PSA table.
RSAR_ODS_API_GET
You can call up the function module RSAR_ODS_API_GET with the list of request IDs given by the function module RSSM_API_REQUEST_GET. The function module RSAR_ODS_API_GET no longer recognizes InfoSources on the interface, rather it recognizes the request IDs instead. With the parameter I_T_SELECTIONS, you can restrict reading data records in the PSA table with reference to the fields of the transfer structure. In your program, the selections are filled and transferred to the parameter I_T_SELECTIONS.
The import parameter causes the function module to output the data records in the parameter E_T_DATA. Data output is unstructured, since the function module RSAR_ODS_API_GET works generically, and therefore does not recognize the specific structure of the PSA. You can find information on the field in the PSA table using the parameter E_T_RSFIELDTXT.
RSAR_ODS_API_PUT
After merging or checking and subsequently changing the data, you can write the altered data records into the PSA table with the function module RSAR_ODS_API_PUT. To be able to write request data into the table with the help of this function module, you have to enter the corresponding request ID. The parameter E_T_DATA contains the changed data records.

*** Error from PSA ****RSAODS

I am facing the issue in 0HRPOSITION_TEXT Master Data Load that "**** Error from PSA ****(RSAODS) " again and again and
the PSA is also not present for this specific load .
What to do for this.?

Also,
Check sm58 in sorce system and if any entries with your BW source system then select it and Goto Execute LUw and execute it. This happens when some datapackets does not reach PSA.
Another solution might be the one described in note 968504: running the program 'RS_TRANSTRU_ACTIVATE_ALL'.
Thanks
Neetha

I'm getting an error Out of memory message when I try to render - There's lots of memory

I'm getting an error Out of memory message when I try to render - there's lots of memory and I've never gotten this before - any ideas?

Thanks - I did go through and change all the profiles to Apple RGB, there are several to choose - but I'm still having problems - I think it has to do with corrupt images - Im backing up and starting over - I've worked with images large and small for years and never had this problem - thanks

I am getting an Error 5.7.1 message when I send emails on Firefox; but not on Internet Explorer. Why?

I am receiving an Error 5.7.1 message when I try to send emails, or respond to emails on Firefox; but not on Internet Explorer. It just started doing this today.

iCloud also doesn't do tunes with bitrates below 96 Kbps.

I get a download error. tap to retry message when I try to download a movie I rented?

I get a "download error. tap to retry" message when I try to download a movie I want to rent?

for me i backed up and restored my ipod/ipad and it started downloading right away.

My final cut studio keeps giving me this error out of memory message when ever i try to render a piece of footage and its closing unexpected. Does anybody know the reason?

My final cut studio keeps giving me this error out of memory message when ever i try to render a piece of footage and its closing unexpected. Does anybody know the reason?

I had this problem about 2 months ago and, as others have suggested in this thread, eventually traed it backed to some stills I had scanned and brought into the project. Accidentally I had changed the scanner settings, with the result that a couple of skills were well beyond 1980 x 1020 pixels. I resampled the stills and everything was fine again. Hope this might help.

Error writing to file messages when itunes installation is removing files

I receive almost error writing to file messages when the itunes installation is removing files. I simply click on the retry button without making any access changes and the installation moves on. All of the .rbf files (the first 10 are listed below) are in C:\Config.Msi that errors. Please tell me how to prevent these errors in Windows Vista.
3f9ad5.rbf
3f9af2.rbf
3f9b08.rbf
3f9b0a.rbf
3f9b0b.rbf
3f9b47.rbf
3f9b50.rbf
3f9b55.rbf
3f9b71.rbf
3f9b7b.rbf

The nearest I can find is there is a conflict between the Windows Backup program (which creates zip files) and Stuffit, which also creates zip files. Have you been using both those programs?

Error from debugger: Error launching remote program: security policy error

Hi all,
I bought yesterday the license for Iphone Developer, I'm programming
an app and would like to start testing it on my iPhone (EDGE, OS 2.1).
I'm using osx 10.5.5 on a MacBookPro, and latest SDK. Developing
and testing on simulator is ok, I followed all the procedure for requesting
certificates, downloading them, the provisioning file and dragged on
Xcode, I can see the iPhone with my provision name enabled for developing
in the Organizer view, and I followed instructions to configure Xcode to develop
on my device changing relevant options in the targets as explained online.
When I try to develop on device I get all the process, file is transferred
on device, but when launching I receive the error
Error from debugger: Error launching remote program: security policy error
Also when I try to launch the app from the phone it says there was
an error and it's not possible to lauch the app. Is that an error in my
steps configuring Xcode or is it something else?
Thanks,
Giancarlo

Never mind, I found it out, if you follow the exact guideline of apple, you will... get this error always
What you need is to make sure you have filled out the proper fields such as your bundle ID, although apple says it's auto-filled, it's not, in my case. you will need to change it from 'com.yourcompany....' to the one you set up on iphone dev site, such as 'com.toughgamer.testApp' in my case.

How do I stop AE from changing my workspace when loading a project?

How do I stop AE from changing my workspace when loading a project? I've looked everywhere and can't find it. I work on a lot of projects that a peer works on and his screen size is smaller and his workspace is different than mine. Is there a setting I can change so that when I open one of his projects my AE window doesn't change?

No. That behavior is intended. The problem is probably that your colleague uses the "Standard" workspace in a custom configuration and since it is matched by name, it emsses up your "Standard" workspace as well. Therefore advise your colleague to create his own workspace with a custom name and/or create your own custom workspace to be able to more quickly reset things.
Mylenium

" Error when inserting in PSA table RSTSODSPART" when loading into PSA

Hello,
Did anyone encounter something similar, and found a solution ?
BI 7.0 - EnhP 1 - SP5
When loading data from R/3 into PSA, we encounter following error message:
" Error when inserting in PSA table RSTSODSPART"
===============================================================
- the first datapackage is written successfully to PSA,
but from the second datapackage onwards the error message pops-up
" Error when inserting in PSA table RSTSODSPART"
- The original dataselection in the infopackage is somewhere stored
If the selection in the InfoPackage is reduced (e.g. only one document i.o. a period)
it stil starts loading according the original selection (the month)
- If we create a new InfoPackage and select very few data (only one datapackage)
then we can load to PSA succesfully, but when we load to DSO we can't activate the DSO.
- We remarked that:
Two versions of the PSA exist for that datasource 0FI_GL_40:
a Table(/BIC/B0000555000) in version 1 exists,
a Table(/BIC/B0000555001) in version 2 exists
Thanks in advance,
Best regards

Hello All,
We had a problem similar to what Ilse Depoortere describes. The problem happens in our BW QA system a few days/weeks after it has been copied from Production. Data loads start failing with these two error messages:
RSM2 851 - Error when writing in PSA (Caller 32)
RSAR 130 - Error 7 when adding to PSA (Caller 70)
We have just implemented the fix described in note 1340371 (replaced the LIB_DBSL with patch level 247), and the problem is gone. Failed data load process chains can be restarted and finish successfully.
This has been a really useful discussion, thanks all! And thanks to my coworker Bob who found it.
Vince Vajda

"****Error from PSA****" error message when loading InfoCube

Similar Messages

Maybe you are looking for

"Error from PSA" error message when loading InfoCube