Error from RFC adapter

Hi,
I encountered an error while sending RFC from ECC5.0 to XI using RFC sender communication channel and TRFC. The error in the TRFC monitor is
com.sap.aii.af.rfc.afcommunication.RfcAFWEx
: lookup of alternative
Does anyone have an idea what might be causing this?
thanks.
James Chang

Hi,
Is it solved?
If not just check with RFC Destinations(SM59- Tcode). Also check with Cache Refresh.
RFC Sender Error
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Hope it helps,
Regards,
Moorthy

Similar Messages

Obiee start page error : Error 500 internal server error---- From RFC 2068

Hi,
Atlast after 100s of attempts(it took around 2 months) I successfully installed Obiee 11g on my laptop (simple install type)
(lot of errors and lot of issues).
Now the problem is whenever I start the BI services "http://systemname:7001/analytics/saw.dll?bieehome"
it won't open some time especially when system is not connected to internet... and whenever I connect to internet it works properly..
( I installed Microsoft Loopback Adapter for static IP)....
The error I am getting when I am not connect to internet is " Error 500 internal server error---- From RFC 2068 Hypertext Transfer Protocol-- HTTP/1.1:
10/5/500 Internal Server Error
The server encounterd an unexpected condition whcih prevented it from fulfilling the request"
Does Obiee 11g definitely need internet connection(for standalone systems) to work properly..?
Thanks and Regards,
Sri..

it works some time ......

Error 500--Internal Server Error From RFC 2068 Hypertext Transfer Protocol

We are encountering the following error while navigating the dashboards/ reports through OBIEE: "Error 500--Internal Server Error From RFC 2068 Hyperion Transfer Protocol"
While navigating from one dashboard page to another this error is encountered or we get kicked out of the session and need to log back in.
Any one experienced the same before?

Thanks Srini.
They issue we are facing is not post-installation specific. The environment functions fine but when we navigate dashboard pages, then this error pops up. It is intermittent and applicable to certain dashboards and reports. Not sure if you have ever encountered the dashboard/ report design causing this?
Ganesh

Error while doing commint from RFC Adapter

Hi,
We have a SOAP-PI-RFC synchronous scenario. Through this Soap request comes to PI and passed on to BAPI via RFC adapter. This BAPI saves the transaction & return the document number. We are using " PI PI parameter u201CCommit Handling for single BAPI' in RFC receiver Channel.
While this setup works for 1 posting, when we do the mass load ( Say 20 Documents) half of the documents are not able to Save. Although BAPI, returns the document number but on checking the document does not exists in SAP. To do further test, we created a program in ECC and try calling BAPI in loop and calling BAPI Commit.
This way program works fine and there is no error
So in nutshell, when we PI do the commit, half of the documents are not saving where as when the ABAP program commits no error. Is there any special way that PI calls this commit work.
PS: We created a wrapper BAPI which calls the orgirnal BAPI and Commit BAPI & called this from PI but still the same problem is coming.
Appreciate help on this.
Regards,
Harish

Are there any error messages in the RFC Reciever channel in Runtime Workbench?
RWB -> Component monitoing -> Adapter Engine -> Comm Channel -> filter for type RFC
Please try to give some more details on why the system says the messages are failing.

Error in RFC adapter

Hello All,
I am working on File to RFC Asynchronous Scenario. I am getting Error in M receiver RFC adapter. It is displaying in Adapter Monitoring as
- Error: 2007-10-03 05:28:38 EDT: Message processed for interface BAPI_CUSTOMER_CREATEFROMDATA1: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was
Can any help how to resolve this.
Regards

Hi,
The RfcAdapter trys to find a Sender Agreement for this RFC call but the lookup failes. The values used for this lookup are:
 Sender Party/Sender Service: The values from Party and Service belonging to the sender channel.
 Sender Interface: The name of the RFC function module.
 Sender Namespace: The fix RFC namespace urn:sap-com:document:sap:rfc:functions
 Receiver Party/Receiver Service: These fields are empty. This will match the wildcard '*'.
Chilla

Error from BPE Adapter using in Async Sync scenario

Hi,
I'm trying to use a Asyn Sync pattern with BPM:
1)File adapter get a file from AS400, split it several XML messages and send to XI(Async)
2)XI get each message and forward to BPM using XI adapter
3)BPM has to send the message to R/3 via BAPI (Sync)
4)R/3 reply the result message to BPM(Sync)
5)BPM has to send the result message to e-mail system if an error had occurred in BAPI call (Async)
When I send directly from File adapter to R/3 works like a charm, but when I want use the BPM, a soap header error says to me, that cannot identify a data type that Im using in the message sent by File adapter.
The error that I'm getting is BPE Adapter UNKNOWN_MESSAGE in soap header.
Regards,
Eduardo

I got the same problem after installing new patches.
This is what I had to do:
Go to SXI_CACHE
- Choose Business Processes
- select your Buisness Process
If your buisness process has Return Code 99
- Click "Repeate Activate" button
- On the next screen, click Activate again.
This worked for me. Good Luck!

Error in RFC Adapter PI 7.10 maximum size of requests for one LUW

Hello all,
I have a big issue on our Development - SAP PI 7.10 System. If I try to push a RFC from a Client System
I get follow error messagei in the Runtime Workbench (RWB) back:
processing error to be caused by: com.sap.aii.adapter.rfc.core.server.RfcServerException: maximum size of requests for one LUW has been reached (1). handling of request for tRFC (TID: 0AA001B8712C49D35D4D06C2) not possible (server: RfcServer[PKG_R3_D07_600_RFC_SND]1)
But I don't know why. I checked follow OSS Notes:
730870 and 774705 w/o success. It will be nice somebody can help me.
Thanks
S. Kohler
P.S. We have the same scenario in our Quality SAP XI System and there works. I couldn't find any
differences between the Adapters. Is there a problem with the parameters ????

Hello Tarang Shah,
okay. Here again ( I thought I mentioned above):
in Q50 (SAP PI 7.10 System) we create a RFC Server with the program ID RFC_Q50.
in D64 (SAP PI 7.10 System) we vreate a RFC Server with the program ID RFC_D64
in D07 (SAP R/3 4.7 x110) we create a RFC Connection to D64 with the program ID RFC_D64.
The testconnection works well. I see in our Dev. SAP PI System (D64) that the connection works.
The problem is here, if you start in the application (System D07) the push, you get the error :
maximum size of requests for one LUW has been reac hed (1). handling of re
in Q50 (SAP R/3 4.7 x110) we create a RFC Connection to Q50 with the program ID RFC_Q50.
The testconnection in Q17 works well. Also the push from the application (System Q17.)
This means, the functionallity is okay on both sides (Q17 and D07) only the application sending
process from D07 makes trouble ( you see in Transaction SM 58 on Client Site, the error as I mentiond above and in SAP PI side.) It seems that SAP PI could't accept more as one LUWs
in the same time. Q50 (Q- System) accepted.
So, this is the reason in my point of view, that the problem isn't the connection, seems more
an paramter problem in D64 side. But I don't know which parameters. I checked the OSS Note 730870 and 774705 w/o success.
Thanks
S. Kohler

Error when RFC adapter calling the BAPI

Hi freinds
Today when I was executing my scenario ( File -- XI -- RFC ), I got following error ::
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception while calling Z_BAPI_POS_AUTOMATION in remote system (RfcClient[RFC_Connection_SAPR3_DEV]):com.sap.mw.jco.JCO$Exception:(104) RFC_ERROR_SYST
Before this error I executed my scenario 2-3 times without any errors.
I found that in RWB the message status was "Waiting". SO I checked the Component monitoring & found this error in Self Test Status ( the symbol was RED )-->
java.lang.ArrayIndexOutOfBoundException: -1 ( Not copied from the original error message )
I clicked the "Repeat Self Test" button & the status become green so I checked my message again. Now it was successfull but in 2 retries it was giving the JCO error & after the Self test ( 3rd retry) it went fine.
I didn't change anything else other than Self test.
This happened two times with me today. Can anyone tell me the reason behind this & what will be the permanent solution of
this. Is this related to some memory dumping ? Is their anything like clearing memory for adpaters in XI.
Best Regards
Lalit

Could you pls check whether a short dump occured in the target system.
Go to ST22 in the target system and check.
Thanks,
Renjith

Receiving "Invalid char in text." error from file adapter

I'm testing a file adapter and am receiving the following error:
Invalid char in text.
The invalid character seems to be the ascii Record Separator character, Hex 1E, HTML 

Is it possible for me to modify the file adapter schema to handle this character?

The HTML description should have been this (minus space characters)
& # x a ;

RFC adapter not started (Error starting AS Java Service XPI Adapter)

Dear Experts,
We have recently Upgraded our sustem from XI3.0 to PI 7.1, and have encountered a peculiar error in RFC adapter which could not be started
error says: Error starting AS Java Service XPI Adapter: RFC
corresponding instance when started says
Error starting AS Java Service XPI Adapter: RFC on DVEBMGS00
Hence our RFC channels are not functioning
Please help
Regards,
Rana De

can you try to restart XPI Adapter:RFC in NWA. if still it throws error then try to restart java stack.

Error 403--Forbidden- From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1

I am getting the following error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.4 403 Forbidden
The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
It throws an error when I click on a button which in turn calls form authentication[edit.do] and it fails. LDAP server is configured for group- My Admin. We are using AMAgentFilter
Its currently working in PRODUCTION WL8 with given configurations, please be noted that we have not changed anything in config files[web.xml/weblogic.xml]
WEBLOGIC is configured for LDAP Server , i used same credetials to login , i am able to login to welcome screen, but when there is FORM AUTHENTICATION [edit.do], it fails.
This edit button calls [edit.do]. It fails there. What we need to check for making it working . We are upgarding from WL 8 to WL 10. its working fine in WL8.
Do we need to provide anything in WEBLOGIC server to configure the group name My Admin
WEB.XML
 
 <filter>
 <filter-name>Agent</filter-name>
 <display-name>Agent</display-name>
 <filter-class>com.sun.identity.agents.filter.AmAgentFilter</filter-class>
 </filter>
 <filter-mapping>
 <filter-name>Agent</filter-name>
 <url-pattern>/*</url-pattern>
 </filter-mapping>
<security-constraint>
 <web-resource-collection>
 <web-resource-name>saveAction</web-resource-name>
 <url-pattern>edit.do</url-pattern>
 <url-pattern>update.do</url-pattern>
 <http-method>POST</http-method>
 <http-method>GET</http-method>
 </web-resource-collection>
 <auth-constraint>
 <role-name>Admin</role-name>
 </auth-constraint>
</security-constraint>
<security-role>
<description>Admin</description>
<role-name>Admin</role-name>
</security-role>
WEBLOGIC.XML
<security-role-assignment>
<role-name>Admin</role-name>
<principal-name>My Admin</principal-name>
</security-role-assignment>
please provide me the checklist to find out the reason for this error.
1, weblogic server configuration checklist
2. LDAP Server configuration checklist
Thanks

Hi Sandeep M.
Thanks for your replay,
Another place means Purchase order standard page is there in that "orders" and " aggriments" two tab's are there under orders Tab when user click on submitt button
ex :Go
when user click on Go button Destination URI=OA.jsp?page=/xxiff/oracle/apps/icx/webui/XXIFFUcmPG&pgType=OrderPG&param={@PoHeaderId}
same as under aggriments tab
when user click on Go button
Destination URI=OA.jsp?page=/xxiff/oracle/apps/icx/webui/XXIFFUcmPG&pgType=BlanketPG&param={@PoHeaderId}
This custom page is being called using absolute page path and name not AOL funcation name

Error 404--Not Found From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

I installed 9.1 HCM with peopletools 8.52.
Everything was working fine - I sat up the process schedulers and reports were posting ,I built few pages ,menu etc and registered them and inserted data etc.
Then I decided to setup the Integration broker.
First I ran datamover script - appmsgourgeall.dml to clear the application messaging queue.
and I renamed the local node from PSFT_HR to YACINE_PC_HCM
and I configured the gateway
http://yacine-pc:8000/PSIGW/PeopleSoftListeningConnector
and the status was active.
then loaded the connectors successfully.
In the final step I went to the gateway propreties and I put the app server url //yacine-pc:9000.
user name:PS and pass:PS etc
and added the new node name - I clicked on Ping and it failed but I saved it anyway.
and from there the PIA stopped working .
I restarted the app server the PIA and I even reinstalled the PIA but it always gives me the same error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

For the record
I did fix this error shortly after posting this Thread.
I edited integrationgateway.propreties and I removed the node definition then I redid the setup of the node by adding authentication to it.
Removed lines
#ig.isc.HCM_YACINE_PC.serverURL=//yacine-pc:9000
#ig.isc.HCM_YACINE_PC.userid=PS
#ig.isc.HCM_YACINE_PC.password={V1.1}swDhibXvfL0=
#ig.isc.HCM_YACINE_PC.toolsRel=PT8.52

Difference and usage of Bapiname_Input and Bapiname_Output class from RFC

Hi,
When we create a model from RFC adaptive model we will get 2 classes for every RFC as Bapiname_Input and Bapiname_Output. What is the difference between these two. Most of the time we only use Bapiname_Input class for calling rfc by setting the import parameters from webdynpro.when we apply template on component controller and model, it always creates a function
executeBapiname_Input() which does the calling of the rfc using model.execute.So what are the difference between Bapiname_input and Bapiname_output classes and in which case which is used.
Thanks.

Hi,
BAPI_Input : has all the input parameters to the BAPI and also the table parameters.
BAPI_Output : has all the output parameters from the BAPI and also the table parameters. Table is a two way communication, so it is available both in Input and Output Nodes.
Usually we use BAPI_Input because all the import and table parameters are available in this node.
But, when we have to use the export parameters (like the error flags, message text etc) you will have to use the BAPI_Output.
Hope this helps.
--MLS

Sender RFC Adapter - Data to be sent from R/3

I am working on a scenario where I have to send data from an RFC-enabled function module from R/3 to a file server via XI. The entire scenario is asynchronous.
Sender: RFC Adapter
Receiver: File Adapter
I have done all design and the configuration. Both communication channels are working. I have the RFC destination also set up correctly in R/3.
However, when I run my ABAP program where the RFC-enabled function module is called, I get a shortdump with the message "senderAgreement not found: lookup of binding via CPA-cache failed for".
Plus: " The error occurred during an RFC call to another system."
Could someone kidly help?

Hi,
Follow these steps :
1. import the ECC_ Server into ID if not done
2. Refresh Cache : Tcode SXI_CACHE
3. Please check for Sender agreement config
4. Check out the parameters when R/3 calls back XI, it passes the SYS-ID and client number and checks the same in the Integration Configuration Under Business System Service-> Adapter Specific Identifiers. The R/3 System ID and the client Number
Also check out these blogs..
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
regards
Aashish Sinha
PS : Reward points if helpful

Error in Reciever RFC Adapter

Hi All,
While working with JDBCXIRFC, the only error with Reciever RFC Adapter is as
follows.
ZBAPICUSTOMER_DETAILS: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declaration(2)
In SXMB_MONI, the messages are queued up.
How to debug this error?
Regards
Pavan

1. Map all the mandatory fields..
I have mapped all the mandatory fields. If i enter same kind of values in the same fields of BAPI manually (in se37), the table gets updated.
how you can say that data is getting into the right tables...when you are sending the same data.....may be the data is old only..
Perform the Message Mapping and Interface Mapping test in IR only...
3. Kindly check the Sender_MM Mapping once more...If it is fine...reactivate and Update the cache..
Its fine and reactivated and even updated cache.
Now one doubt....
In Message mapping, the sender mesage type is as follows.
sender_mt 1:1
->Row element 1:unbounded
> zkunnr element xsd:string 1: unbounded
> zname1 element xsd:string 1: unbounded
> zstras element xsd:string 1: unbounded
> zadrnr element xsd:string 1: unbounded
> ztelf1 element xsd:string 1: unbounded
I have mapped ROW with ZBAPI_DETAILS.
the root of sender message type SENDER_MT is left as it is....
Is there anything need to be done (mapped) with this root of sender message type?
No i don't think so, what i can get from your approach is that you want to receive n similar type of records in a Message and want 2 create n different messages for each record from source structure.. 
With this status, i have tested the Test Configuration in Integration Directory. Still getting same error message as follows...
Kindly let me know the name of BAPI.
Perform the Message Mapping and Interface Mapping test in IR only...
java.lang.NullPointerException thrown during application mapping com/sap/xi/tf/_sender_mm_:
Regards,

Error from RFC adapter

Similar Messages

Maybe you are looking for