Error FZ085 tcode fbwe
Hi gurus,
When i run the t code FBWE i cant . have the following error: Error in accounting immediately creates batch input data set, Message: FZ085.
what is the reason??
Hi Nereab
As per my understanding the problem is that Batch input is generated
in FBWE even though "immediate posting" flag is selected.
In that case, please consider the following info:
As per standard behaviour, each time the System is not able to post
directly by FBWE (which may be due to a customizing reasons) then the
System will give a message as below and create batch session
FZ085 > Error during immediate posting; Batch input session created
Also another probable reason can be as mentioned in the note 951873 i.e.
"The problem occurs when the screen resolution is very low or when the
window is very small."
br, Guido
Similar Messages
-
hey guys i m tryin to create a server proxy but getting a runtime error in tcode sproxy GETWA_NOT_ASSIGNED.
any idea where is the problem?
thanx
ahmadAhmad,
Check this thread where your issues is discussed very clearly:
Is There....
---Satish -
Dear experts,
I am new to Bill Of exchange functionality in SAP. Please let me know the usage of tcode FBWE.
Regards,
VijayHi,
ST03n in expert mode should give you the details. Probably the task type is the field which will let you know the mode in which the work process was executed. The different modes are:
D Dialog,U Update,S Spool,I Batch input,B Batch,E Enqueue.
For more details: please refer http://help.sap.com/saphelp_nw70/helpdata/EN/d7/7de93a2176a418e10000000a11402f/frameset.htm -
Error in TCode iview Select a line or position the Cursor correctly
Hi All,
I am getting the below error while selecting the row in Tcode iview
Select a line or position the Cursor correctly.
You have not selected a delivery or a delivery item for processing and the cursor is not positioned on a valid line, even after i am
selecting the Delivery and click on the execute button
My system config :
NW04s SP 20
Thanks&Regards
MurthyHi Murthy,
Create the Iview again.Hope the issue will resolve.
Thanks,
Arun -
hi,
i have some issue regarding FI area.
when i use tcode fk01 for creating vendor master data .
system shows rumtime error .
i attached snapshots related to this error .
pls help me out from this problem.
rgds,
Meenakshi ChitrodeThe "deep" data are the dynamic data objects - strings, internal tables and boxed components as well as data and object reference variables. Could it be that some structure that is part of WPLFA1 has been enhanced with a deep component on your system?
I'm not 100% sure what and where the problem is... let's try to isolate it.
Are there any customer append structures added directly to WPLFA1? Is there any other structure besides LFA1 "included" directly in WPLFA1, in other words?
Does the check on LFA1 show errors as well? Then we have to work down from LFA1...
cheers
Janis
Message was edited by: Jānis B -
Hi,
I excute Tcode AJAB to close Fiscal year of 2008 for FI-AA but i get this error :
" Depreciation Area number 31 is already closed for Fiscal year 2008 "
Please how to solve this ?
Regards.Hi,
is the message number AC 424?
Then the source of the problem seems to be an incorrect closed fiscal year (T093B-ABGJA) in table T093B.
In case the above is correct my proposal would be either to use OAAR as stated before, or if OAAR is not possible to update the database T093B temporary to change the last closed fiscal year directly.
Regards,
Markus -
Error in tcode: crmc_r3_org_generate
Hello sap gurus,
I am getting an error message in Tcode :crmc_r3_org_generate,when i am trying to generate R3 org structure to CRM system.
So Could please say me that where can i find the error which is associated with it.
Is there anything where i need to configure?
Thanks and regards,
Divya.Hi sapgipsy!
Check the Note 437477 - Initial download Customizing organizational data R/3 --> CRM
Regards, Kostya -
Run time error In TCODE FAGLL03
Hi Expert,
when I execute the code FAGLL03 with these single input ( GL Account, Company Code, Profit center ). after 20 and 25 mintue it went into run time error. What is the error in run time analysis is below mention.
Program Name: SAPLFAGL_ITEMS_SELECT
Trigger Location of run time error.
program: SAPLFAGL_ITMES_SELECT
Include: LFAGL_ITMES_SELECTU07
row: 329
Module Type : (FUNCTION)
Module Name: FAGL_GET_ITMES_BSAS
DESCRIBE TABLE < it_itab_data> LINES LD_FAGLPOSE_LINES.
if LD_FAGLPOSE_LINES gt 0.
perform complete_data changing
lT_FAGLPOSE[].
APPEND LINES OF lT_FAGLPOSE TO C_T_FAGLPOSE.
ENDIF.
ELSE
ASSIGN: lr_tab_data->* to <lr_tab_data>
lr_struc_data ->* to <ls_struc_data>
refresh <lt_tab_data>
328 line
=== FETCH NEXT CURSOR I_CURSOR
APPENDING CORRESPONDING FIELDS OF TABLE <lt_tab_data>
PACKAGE SIGE id_MAXIMUM_LINES
DELTA_DBCNT = SY-DBCNT - OLD_DBCNT.
OLD_DBCNT = SY-DBCNT.
DESCRIBE TABLE < it_itab_data> LINES LD_FAGLPOSE_LINES.
if LINES LD_FAGLPOSE_LINES gt 0.
if i_read _bseg is initial.
perform convert _data using
<lt_tab_data>
Ir_struc_flexa
Ir_struc_table1
lr_struc_data
lr_tab_data
changing
lt_FAGLPOSE[].
refresh <lt_tab_data> " 987950
please tell me hoe can i resolve this problem so that when we run this tcode it will not go in run time error.
Thanks.
Edited by: Rob Burbank on Jul 19, 2010 2:54 PMHi Eric,
Since the runtime is caused by a time-out, did you investigate if the following notes is applicable?
[Note 1135916 - Line items: Help for analysis for long runtime|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1135916]
This note outlines on how to analyze this transaction and its course of action.
Kind regards,
Robert -
Hi
I am getting an error while running Tcode FNFR.
Number range object <Company Name> <Object>: Interval not found
I tried to increase the intervals.
Please suggest.
ThanksI think Jeremy's suggestions are good. I just wanted to add that as the message says the interval is not found, if we take this at face value then there should be a missing interval for the number range object. If you go to SNRO and enter the object in the message you will be able to check the intervals. I'm not familiar with this transaction but some objects have differnt intervals for periods such financial year, if this is a very intermittent activity it could be that no one has created the new interval for the new period.
-
Hi,
When I execute Tcode PRFI, I get the following error 'Number range object HRTR_PDOC : Interval not found'. When I check in th eTcode SNUM for the number range object, I find it there.
What could be the probable reason for this error?
Please help.
Thanks in Advance.
Regards
JaspreetHi,
create Travel no ranges as per path
financial accounting new> travel management>set up trip number ranges.
Regards
Devi -
Hi gurus,
im getting the following error in the tcode KOK3 (Collective Disp. Internal Orders , part of FI/CO package, KAUF), after applying the new support pack. Error is as follows:
System error: Error in routine T021Q_SON_LESEN SAPMKAUFORC 0
Message no. F4308
Diagnosis
An internal error has occurred.
System Response
Processing cannot be continued.
Procedure
Contact SAP to clarify whether the error can be corrected by a program adjustment or by changes in the parameters.
In order to clarify the error situation, specify the routine T021Q_SON_LESEN in which the error occurred, as well as any other parameters (if specified in the message) which could refer to a key which does not exist.
It tried to find the routine T021Q_SON_LESEN (may be due to its inactivation), but was unable to do find that.
Pl reply.
Thanx,
Naveen VishalIt was resolved due to support pack.
-
Error Running tcode RSMDCNVEXIT
Hi All, While running tcode RSRV in BW stage(upgraded to 7.0) to check consistency of infoobject 0RT_SEAYR, I got inconsistency error:
"There are 1 values with the wrong internal format in the SID table"
when I run <b>RSMDCNVEXIT</b> to Convert Inconsistent Internal Characteristic Values. I get the below <b>error</b>.
<b>Data conversion functions are no longer supported</b>
Both Dev & Stage BW environments have this error. BW producion which is on 3.5 doesn't have this error.
Kindly help
PKI went back and reviewed the doc on RSMDCNVEXIT as I have been struggling with trying to cleanup our MD before we convert to 7.0.
The Help for RSMDCNVEXIT says something to the effect that with 3.0, the BW's consistency checks are strict enough that you should have inconsistencies any more. But there are different things that can still cause MD inconsistencies, such as MD load failures, or a new Note that indicates running MD reorgs can cause problems ( <b>Note 1071894 - Master data inconsistent after master data re-organization</b> recommends not running any MD reorgs until they fix the bug).
For inconsistencies that can not be corrected via RSRV my only suggestion is to try to the Delete Master Data. Maybe the inconsistency is for a value that is not in any transactions. If nothing else a review of the MD Delete log in SLG1 should tell you what the first (and hopefully only) InfoProvider is that it found the SID in question. From there, perhaps you could perform a Selective Deletion and then reload that transaction witha good SID value. Maybe you just live with inconsistency if it won't effect user's queries.
Might be a good question to open a Customer Message with SAP about. What do they recommend to correct a MD inconsistency. I'd like to see SAP's response. -
Bill of Exchange List TCode FBWE - Missing Bank Data
Hi...
We have an error when executing the Bill of Exchange List. The Bank Data has not been populated for one Doc. I think this is because there are two Bank Accounts defined in the Customer Master.
Question is.....is it possible to get the Bank Data into FBWE now, or will the Doc need cancelling? And also, if it is indeed cancelled, how can the problem be eradicated in the future for Customer Masters with multiple Bank Accounts?
Thanks...........Dear Lolu jo
I have assigned the special gl account as you said but it is giving errors. I have defined accounts as follows :
Reconciliation account type k 100501 under sundry creditor
Alternative recon ac type k for boe payables K 100591 under sundry credito
Alternative recon account type k for statistical posting 200169 under current assets
In OBYM, for k s i have assigned 100501 and 100591
for automatic offsetting entry check/boe i have assinged ks : 200169.
for end user steps i am doing F-43, then when i am doing fbw6, system is giving error that sga ks account determination is missing.
Kindly inform me whereva I am wrong
Regards
keyin.12345 -
Hi,
We are using OHTs with destination type file.
We have created a logical path.when we are trying to assign this logical path to the file,we are getting a dump.
Runti.e Errors ASSI6N_SUBSTRIN6-N0L.ALL0WED
Date and T1ne 06/1i812009 22:56-:350
Short text
ASSI6N to a substring not allowed.
What happened?
Error in the A8AP Applicat1on Program
The current ABAP progran SAPLOSFNu201D had to be terminated because it has
cone across a statenent that unfortunately cannot be executed.
Error analysis
A field symbol should have been set to a substring.
However, this is not alliowed..
Maybe a substring was intended to be used 1n a paraneter transfer
This Is not possible, either.
Trigger Location of Runtine Error
Progran SAPLOsFN
Include LOSFNIO1
Row 223
Module type (M0DuLE PAI)ASSIGN_SUBSTRING_NOT_ALLOWED
Please help with this.
Thanks,GirishPlease apply the SAP Note 1297989 and it will fix the issue.
Thanks. -
Error in TCode S_ALR_87013431 "Confirmation Using Operation List" selection
Hello Experts,
I think I have encountered an error in the functionality of the S_ALR_87013431 "Confirmation Using Operation List" in ECC 6.0.
When I select the "collective time confirmation" checkbox, the intended functionality is (form the transaction help) "If you select this field, the report program enters the selection result directly in the collective entry screen, without previously displaying a list of results from which you can reselect."
However, if I check the box, the results still don't appear directly in the collective entry screen, but still as a list of results.
Is there some configuration missing? Have you encountered a similar error?
Thanks!
Andreashi
i think there is some problem with the transaction ,in easy access menu it is displayed as S_ALR_87013431 confirmation with operation selection.
i think same screen it has incorporated
you can use IW48 which fullfil your requirement
regards
thyagarajan
Maybe you are looking for
-
TS3899 I changed from an Iphone to a Android. I can't get my email from other Iphones
I changed from an Iphone to a Android. Now I can't recieve emails from other Iphones.
-
House bank with three currencies for bank statement
Hi, I need to know, how I can customize a house bank that has one account with thee different currencies (usd,gbp and eur) for the bank statement ?? Thak you, OSCEL
-
NB520, Replaced display, only work with AC power, not work with battery
Hi I just replaced a broken display on my 7 months old Toshiba NB520 and now it only works with AC power. The battery icon shows 52% but not charging. When I plug out the AC power, it turns off. Help
-
Yet another "MacBook Air vs. Pro" question, now with specifics!
I'm upgrading from an older Mac Mini 2GB purchased in '08. I've looked at some recent comparicson threads here, but help me clarify my thinking for my specific situation... I'm strongly considering the 13" MacBook Air. Aside from Web surfing and ema
-
I have installed flash player and also I have installed flash video downloader. i cant download videos how to download videosu