Error generating reports.

While i'm trying to generate some reports it occurs an error.
"REP - 0157 DUNIT has to be an YES or NO"
I don't know why this occurs...

Set NLS_LANG to US format american_america.<charset>
Example: american_america.we8iso8859p1

Similar Messages

BI Publisher - PO_DISPATCH Error generating report output

Hi everyone,
Sorry for my bad english... having said that...
I need to modify the Purchase Order print. First, I wanted to see the standard version to get an idea of how much different it was. Well, I don't know because it doesn't work.
Error:
Error generating report output: (235,2309)
Error occurred during the process of generating the output file from template file, XML data file, and translation XLIFF file.
I know there are several topics on the web, but all of them are about new or custom reports, this is a standard one. When I preview the report on the report definition it works fine, so I assume there's a problem with the XML file generated. When I preview the report specifying an alternative XML I get the same error. The XML file I choose was the one generated by PeopleSoft when trying to view the printable version of the PO online.
So, I start cutting portions of the XML File. I started leaving only de Header Data and it works OK, when I add the Lines it failed. I add the Line Fields one by one to detect what was the problem... And finally it failed when I add AMT_LINE_MAX. Why? No idea, is it because its value is '0,000' instead of '0.000'? I don't think that should be the problem since there are other numeric fields on the header, all with ',' as a decimal separator...
Am I missing some configuration?
Thanks in advance.
Regards,
Veronica.

Have a look at the following doc:
"Error generating report output. (235,2309)" When Running the "PO XMLP Dispatch" XML Publisher Report (PO_DISPATCH) for a Purchase Order with a Ship To Location with Special Characters in the Address [ID 1299876.1]
https://support.oracle.com/epmos/faces/DocContentDisplay?id=1299876.1
Stating this happens for example when there is a location with special characters.

Error generating report job with the task name 'FSRM_Report_Task

Since this morning we have been having a problem with FSRM on Windows Server 2008 R2, it is no longer running storage reports (both scheduled and on-demand).
We get the following in the event logs:
Log Name: Application
Source: SRMREPORTS
Date: 09/06/2014 08:09:55
Event ID: 752
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: FILESERVER2.curriculum.riddlesdown.local
Description:
Error generating report job with the task name 'FSRM_Report_Task{3add1760-4e79-4141-baba-cb53391bef3e}'.
Context:
- Exception encountered = Invalid argument: StorageType = '101'
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SRMREPORTS" />
<EventID Qualifiers="0">752</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-09T07:09:55.000000000Z" />
<EventRecordID>42920</EventRecordID>
<Channel>Application</Channel>
<Computer>FILESERVER2.curriculum.riddlesdown.local</Computer>
<Security />
</System>
<EventData>
<Data>Error generating report job with the task name 'FSRM_Report_Task{3add1760-4e79-4141-baba-cb53391bef3e}'.
Context:
- Exception encountered = Invalid argument: StorageType = '101'
</Data>
</EventData>
</Event>
We have uninstalled and reinstalled the FSRM role service but are still having the same problem.
Anybody have any ideas?

Hi,
From the error message, it failed because of "invalid argument: storagetype = '101' ".
101 means the storage type is "system" + "cache". Is there any change on your storage before the issue occurs? For example whether the source storage is changed?
FsrmStorageModuleType enumeration
http://msdn.microsoft.com/en-us/library/dd392346(v=vs.85).aspx
If you have any feedback on our support, please send to [email protected]

Error generating report in Report writer (GR214, short dump)

Hello
We are making a report in GGR2. When generating the report group, we have dump with error:
Short text of error message:
Internal error.: SAPMGRW2, Include: MGRW2F20, FORM: GEN_DATAFI
ELD.
Long text of error message:
Technical information about the message:
Message class....... "GR"
Number.............. 214
Variable 1.......... "SAPMGRW2"
Variable 2.......... "MGRW2F20"
Variable 3.......... "GEN_DATAFIELD"
Variable 4.......... " "
I have generated as well via GR52 with the same result.
The report i try to generate has about 500 lines, uses a number of existing sets and has simple formulas in it. When i restrict the number of rows to say 400 I donu2019t have the issue. Is there a restriction to rows in report writer?
Thanks for your help
Kai

Hi,
The error you are receiving could be caused by a large number of row blocks in your report definition, (you can check the report definition with report RGRRDC00). A report should not contain too many row and column blocks. It is not possible to give an upper bound for the number of row blocks (since the length of the coding depends on other parts of the report as well). However, even a complicated Report Writer or Report Painter report should not contain more than 50 row blocks, and reports with more than 100 row blocks should not be defined.
In this case the report(s) have to be redefined. Please also refer to the note 387916 for further information regarding this issue.
When there are more than 30 variables in a report, please have a look at the note 332091.
Please reduce the number of row blocks in the report by using the function 'Edit' -> 'Rows' -> 'Explode' in the Report Painter
definition. This function enables several rows to be created for one row block (in the Report Painter definition one row block is just one row). Report Painter (and Report Writer) are designed to display hierarchical reports where the rows in the few row blocks are built up using the 'Explode' function.
regards
Waman

Error generating report - Program was terminated by signal 11

Hi All,
I am very new to XML Publisher reports and I am facing the following issue in a report - Program was terminated by signal 11
I created the data model in RDF and for this I created the corresponding RTF file.
When I see the preview of this RTF file in excel it was perfect without any issues, but when i tried running the report from the application, it gave me the error- 'Program was terminated by signal 11'.
Log file is as follows -
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
ORG_CODE='076'
FROM_DATE='2009/02/25 00:00:00'
TO_DATE='2009/02/25 00:00:00'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
/ehanoi/product/806/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /ehanoi/product/806/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
_AMERICA.UTF8
stat_low = B
stat_high = 0
emsg:was terminated by signal 11
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 11
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 23608833.
Review your concurrent request log and/or report output file for more detailed information.
Please can anyone help me with this.
Regards,
Shruti

Hi;
Search as in metalink emsg:was terminated by signal 11,there are 28 docs avaliable, i am posting someof them.
Please check below notes which could be helpful for your issue:
Report Fails To Produce Bitmap Reports After Patchset 19 . Emsg:Was Terminated By Signal 11 [ID 759456.1]
FVXYECER.RDF Program Was Terminated By Signal 11 [ID 730100.1]
T4A PDF PROCESS FAILING WITH SIGNAL 11 [ID 1078950.1]
Regard
Helios

Error while generating report in RAR

Hello,
We are getting error while generating reports in RAR.
RAR runs sucessfully, can see there are risk, but we cannot dowload those file, usally we use to get zip file.
or cannot see details ,
gives error cannt be displayed.
Thanks,
DK

Hello,
we had same issues, this happed because the disk was full.
Please check with your basis team if the disk is full.
Thanks,
Prasant

Generate report using Word Report Generation VIs error

When I Generate report using Word Report Generation VIs ,the error is generated.
This is my Vi
can somebody tell the error reason?
The attaché is Vi (one is 2011,other is 8.6)
Attachments:
report-8.6.vi ‏16 KB
report2.vi ‏33 KB
template.doc ‏40 KB

Hi Ben64
Thank you! The problem is solved.
BUT when I use the Word Easy Graph vi ,the result is
I want the Graph (curve),like as:
How Can I do get the picture.
I have other problem. I want to get default name for the new word file.
liang

Error While generating Report

Hi ,
I am facing 1 problem while generating Report.
I am trying to generate a report based on one Users global attribute.
I have customized the USER UI CONFIG and Uer Report task to generate a report like this.
I created a new report to generate report and in that report I have given the condition as that attribute equals to some value "true" / "False".
But there are some users who has this attribute value as true and whose accounts are not properly created in a resource LDAP So this User view is containing some error.
Hence when I try to run the newly created report as it tries to iterate on the user objects whose view is containg some errors ,the report is not properly getting generated and giving exception as error in calling the method getResourceobjects on LDAP.
What can I do now ? What is the alternative for me? I want to generate the report on that attribute only.....
It is very urgent for me and Can anyone please help me out....
it would be so great if there is any immediate reponse for this.

>
... ORA-00932: inconsistent datatypes: expected DATE got NUMBER ...
>
I believe the above error message is very descriptive.
HTH
Srini

Getting error while generating report from Siebel (Siebel/BI Publisher)

Dear,
I have completed the integration of siebel and BIP according to the oracle document, I successfully upload the sample template from siebel application to BIP server.
But now I am facing two issues,
I am getting error "Unauthorized access, Please contact the administrator." when I open report on BIP which I have uploaded from siebel.
When I try to generate report from siebel=>application=>Tables=>S_Contact I am getting the below error when click on table report from Report button.
(httptransport.cpp (1635)) SBL-EAI-04117: HTTP Request error during 'Submitting Data SendHTTP request': 'Status code - 500'
(httptransport.cpp (983)) SBL-EAI-04117: HTTP Request error during 'Submitting Data Send HTTP request': 'Status code - 500'
(soapbinding.cpp (675)) SBL-EAI-04304: Unknown Part ':oracle.xdo.webservice.exception.InvalidParametersException' for operation 'runReport' exists in SOAP message.
(outdisp.cpp (247)) SBL-EAI-04308: Operation 'runReport' of Web Service 'http://xmlns.oracle.com/oxp/service/PublicReportService.PublicReportServiceService' at port 'PublicReportService' failed with the following explanation: "oracle.xdo.webservice.
Invalid User Name and Password for BIP Server
(xmlpadaptersvc.cpp (2287)) SBL-RPT-50529: Verify BI Publisher Server Userid and Password.
Error in generating Report Output file /siebel8/sea81/siebsrvr/siebel8/sea81/siebsrvr/xmlp/reports/Rept11-3U7M403.PDF in the XMLP Engine
(xmlpadaptersvc.cpp (2983)) SBL-RPT-50524: BI Publisher engine failed to generate report.
Object manager error: ([0] BI Publisher engine failed to generate report.(SBL-RPT-50524) (0x95c55c))
( (0) err=2818155 sys=9815388) SBL-OMS-00107: Object manager error: ([0] BI Publisher engine failed to generate report.(SBL-RPT-50524) (0x95c55c))
(bsvcmgr.cpp (1392) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
(bsvcmgr.cpp (1236) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
(smireq.cpp (425) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
Please help to resolve this issue.
Regards,
Soahil

This specifically means that the destinations have not been configured in the Crystal Job Server. If you're running 4.x, this may be part of the "Adaptive Job Server" instead of or in addition to a Crystal Job Server. If you're using 3.1 or earlier, you'll also have to set up the destination in the Destination Job Server.
You'll have to log in to the CMC, go to Servers, right-click on the correct job server and go to "Destinations". You'll then add something like "File" or "Unmanaged Disk" to the available destinations and save. Stop the job server, start it again, and your error should go away.
Please be aware that unless you're using specific credentials to schedule the report or you're saving to the server where BO is installed, you'll need to make sure that the BO services are running under a network "Services" account that has access to the folder you're scheduling the report to. By default during installation it's set to run under the "Local Services" account that doesn't have access to the network.
-Dell

Error while generating Report through XL Reporter.

Hello..
I am using microsoft excel 2003.I have installed XL Reporter 2005SP1. While i am trying to generate report throgh excel reporter i get the following error.
Security setting in microsoft excel prohibit XL Reporter from running.
For more information click Help.
I also tried by making security level low in microsoft excel -->Tools > Macros> Security.But still problem there.
Thanks,
Arpit

Hi Arpit,
As well as setting the macro security to Medium or lower, you need to tick the options 'Trust all installed add-ins and templates' and 'Trust access to Visual Basic Projects'. These options appear at the bottom of the Trusted Publishers tab in the Macro Security window.
Hope this helps,
Owen

FREC Error while Generating Reports in Quality Center

Hi,
We usually generate reports using Dashboard module of Quality Center . While generating reports on a particular PC, we are getting the following error.
The SQL Query <sheet1> has failed to run, with the following error:
Returned Result is not valid FREC.
We are able to generate the same report on a different PC.
Does anyone encounter this issue earlier? Could someone help us out in solving this issue.

Issue popped up with me a few times and seemingly uncontrolled.
I resolved one query with replacing quotes in the string i.e. replace single with double by replace([field],chr(39),chr(34))

Unable to view settings tab in one GPO. "An error occurred while generating report: Object reference not set to an instance of an object."

I am the owner of this GPO and I can view the settings tab in any other GPO. But, I get the following message when I try to view the settings tab in one particular GPO:
An error occurred while generating report:
Object reference not set to an instance of an object.
Other posts I look at reference the same error, but with different circumstances, and thus, they specify that the hotfix is for to fix the error under
those circumstances.
I'm accessing GPMC on a Win 7 SP1 machine. DC is Server 2012 Standard.

> Since I have to go through Edit to see the settings, and peruse the
> entire massive folder of settings to try to identify the bad one, it has
> been slow-going and I haven't found it yet.
You can filter ADM templates to show configured ones only, and you can
use the "show all settings" node. This will speed the work up - a little
bit at least :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

GPM Custom GPO-Settings: An error occurred while generating report: Object reference not set to an instance of an object.

Hello,
As you can tell from the title of this question, I am no expert with GPO's. Before I begin, I spent a few minutes to an hour searching and reading in hopes of finding the solution and avoid putting myself out there as a "GPO Newb". While
I found several posts and answers that were similar and were related, the questions and answers were more advanced and did present the solutions providing the person had initial knowledge already. That is not necessarily my case and I would ask for a
little patience and a bit of 'hand-holding' for what I need.
I run SBS 2011, and in Group Policy Management I have a custom GPO. In this GPO I define all my settings. I understand this may not be the best or most practical method of applying policies, but I am not very strict and have few settings. This
policy existed prior to my joining the company, and was migrated in to this SBS '11 from SBS '03. That may be the issue, but before making any changes I am seeking expert advice.
When I select that GPO, named "Main GPO", and click on the tab at the top "Settings" I see the error: "An error occurred while generating report: Object reference not set to an instance of an object."
I saw that when I right click the GPO > View > Options and select the tab "Reporting" that it states that for reporting to work the location of the .adm files must be specified. I see that my option for the location is set to "Default"
which by my guessing would be located in the C:\Windows\sysvol directory. Below is what I see there:
C:\Windows\sysvol\domain
C:\Windows\sysvol\staging
C:\Windows\sysvol\staging areas
C:\Windows\sysvol\sysvol
I think the problem is that my custom GPO are not inside the default location, which I speculate is: C:\Windows\sysvol\domain\policies (which I do see some objects there).
But instead I also see items in this folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just typed 'JOHN.LOCAL' is my actual local domain).
To further this, when I edit that custom GPO, then at the very top of the tree I right click on it and select Properties, I see a Unique Name listed there as a long string of numbers and letters, similar to a registry entry. I searched my server for
that same Unique Name and found it listed inside the folder: C:\Windows\sysvol\domain\policies
If I am correct with my assumption and basic knowledge, I should move all objects as follows:
-Move FROM: C:\Windows\sysvol\domain\policies
-Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
My concerns are that I am not correct at all, that I will break something, that there may be an easier fix than moving anything, or that I am overlooking something causing this error altogether.
Thank you for anyone's help and time with assisting me with this request.
John Fester

> top "Settings" I see the error: "An error occurred while generating
> report: Object reference not set to an instance of an object."
That's due to a security setting (most possibly) your current OS does
not understand. Hard to find out wich exact setting it is... To resolve
this issue, we need the gtpptmpl.inf file residing in the policiy's
sysvol folder. To open this folder, edit the policy, move to computer
settings - policies - windows settings - scripts - startup, press "show
files". Then move two folders upwards and back down to
.\microsoft\windows nt\secedit. There you'll see the gpttmpl.inf - post
its contents and we'll have a look at it.
> location, which I speculate is: C:\Windows\sysvol\domain\policies (which
> folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just
That's perfectly ok - JOHN.LOCAL in fact is a symlink pointing to "domain".
> all objects as follows:
> -Move FROM: C:\Windows\sysvol\domain\policies
> -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
No.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Error messages while generating reports

I am using CR XI SP4 and i get the following message when generating reports:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unknown Database Connector Error
Error in File D:\Temp\{67475350-F4E8-466A-B1E9-414965812A20}.rpt:
Unknown Database Connector Error---- Error code:-2147482942 Error code name:failed
     at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException (Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.t.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.z.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ak.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ad.int(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.bk.for(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.w.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.w.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
In the RAS log file i see:
ErrorLog 2009 7 21 17:45:16.188 732 3648 (\servers\ras\dtsagent\cdtsagent.cpp:3113): CDTSagent::doOneRequest reqId=250: CSResultException thrown.   ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:13209 ErrorCode:706 ErrorMsg:"Unknown Database Connector Error
Error in File D:\Temp\{67475350-F4E8-466A-B1E9-414965812A20}.rpt: Unknown Database Connector Error"
Any assistance would be appreciated
Thanks

hi,
You are able to login in to application, Means your authentication is working.
Open RPD in online mode and try to view data.
Check your connection pool setting in General tab.
Check you have selected appropriate Data Source Name, Call Interface.
Thanks,
Sainath Baludu.

Error when generating report in exe built from LV8.6

Hi all,
Using LV8.6 and report generation toolkit 1.1.3 i have one application in that i am generating report in 'word' and 'exel'. I have built that application as a EXE. in that exe i am unable to generate report. i am getting following error:
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface.
Complete call chain:
Get LV Class Default Value.vi
NI_report.lvclass:New Report.vi
Conditionally Formatted Word Table.vi
r.vi
Regards,
Santhosh M

yes i have includeed all the class and dependents but still it is giving problem i will send my code pls build the exe and run it, thentel about that...
Regards,
Santhosh M
Attachments:
Test.zip ‏11 KB

Error generating reports.

Similar Messages

Maybe you are looking for