Error - Generating WebI report with Multi-Source universe (.unx)

Hello ,
While creating WebI report from multisource universe (.unx) , created using
relational connection with SAP BW JCO connector , following JCO exception is
cropping up
Database error: [Data Federator Driver] [Server] [Connector 'Test_RCN_01'] SAP
NetWeaver BW has reported an exception: com.sap.conn.jco.JCoException: (101)
JCO_ERROR_CONFIGURATION: Server configuration for DF_SERV-bitest-3300-NOSNC is
already used for a running server. (IES 10901) (WIS 10901)
Steps followed for Multi-source universe creation
1. creating relation connection ( Passed)
2. Creating Data foundation using this connection (passed)
3. Mapping two parameters (programIDMapping, hostname ) with RFC destination and
BW FQDN ( passed )
4. Creating Business layer for this Data foundation (passed)
5. Open webintelligence with SSO and while creating the reports using the .unx ,
the above error is coming
already implemented SAP note no 1638647
System used
SAP BW 7.1 with EHP 1 and SP 10
SAP BI 4.0 SP2
Data federation service admin tool version 14.0.2
thanks,
Rajib

Hi,
try with this.
Starting the Gateway Service on the Message Server resolved this issue.
There have also been reports of this issue when name resolution issues occur between the client and the Message Server machine.  As a test, you can add the Message Server name and IP address to the Windows\System32\Drivers\etc\hosts file.
Or check SAP note 1590518.
Thanks,
Amit

Similar Messages

  • Problem in WEBI Report with PCM OLAP Universe (PCM MDX Connector)

    We need to create reports in Web Intelligence from our PCM Models (Business Objects Profitability and Cost Management). We are able to create the olap universe using PCM MDX Connector and we have no problems creating the reports in webi. The problem is when we execute the report (run query): all the data from PCM model is loaded correctly (dimensions, levels, etc.), except the Measures. I mean, the values of all the measures are always zero (0). No matter the way we change the query (adding filters, adding or chopping dimensions, drilling levels, etc.) the value for every measure is zero.
    We've checked the aggretation method of each measure in BO universe designer and are all correctly configured.
    The model in PCM is calculated and even when we run the queries in PCM Model Builder tool directly to the model, the results are retrieved Ok and the measures have correct values (Revenue, lineitem values, etc.).
    Any ideas of what is going on?

    Hi Henry… thanks for your answer…
    The reports we are creating of PCM are not from BW universes, but PCM OLAP Universes. PCM have its own cube OLAP files, and BO universes for those OLAP models use the Business Objects PCM MDX Driver.
    Nevertheless I will try to catch the MDX statement, as you suggest, and see if something is wrong with it.
    The versions we have are: “Business Objects Enterprise 12.3 build 601” and “Business Objects Profitability and Cost Management (PCM) 7.5.11”
    Thanks again.
    Vladimir.

  • Not able to access the multi-source universe in WebI

    Hi
    I am not able to access the multi-source universe in WebI, getting below error message.
    [Data Federator Driver] Unexpected exception: com.crystaldecisions.thirdparty.org.omg.CORBA.UNKNOWN: null | [Data Federator Driver] Failed to connect to any of the provided 'Central Management Server' hosts.
    And also Not able to perform anything to designing multi-source universe in business Layer.
    Universe back-end is
    Oracle 11g and
    SQL2008 DB
    Version IDT: 4.1 Support Pack 2
    SAP BusinessObjects BI Platform 4.1 Support Pack 2,

    Hi Sreeni,
    You can create a new APS in CMC containing the Data Federation Service with
    -Xmx2g -> 8g (This is the suggested range)
    Make sure you remove this service from the existing APS and then create a new one.
    You could refer SAP KBA 1694041 - BI 4.x Consulting:- How to size the Adaptive Processing
    Server (APS) which would assist you in sizing the APS.
    Regards,
    Manpreet

  • Error when trying to open a WEBI report with OpenDocument.jsp

    I have a weird problem, i'm trying to open a WEBI report with OpenDocument.jsp and I get the following error message
    An error has occurred: Could not find the document.
    the weird thing is that this error only occurs when i use Internet Explorer.  When i use the same link with Google Chrome, i see my report.
    How do I make this work, our standard web browser is Internet explorer.
    here is a sample link i use to call my report.
    http://<server>:8080/OpenDocument/opendoc/openDocument.jsp?iDocID=AVGrgQALGJZGipKCfjPPZ3g&sIDType=CUID
    Our BO environment is :
    BO XI 3.1 sp2 fp 2.3
    tomcat 5.5 front-end

    Hi,
    I don't know how much this solution will help you but it is worth trying.
    SAP Note: 1198844
    [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3131393838343426]
    Regards,
    Bashir Awan

  • Migrating Crystal and Webi Reports with Universe from 1 folder to different folders

    Hi There
    Does anybody know of a way to do the following
    this is for BOE XI 3.1 SP 6 FP 6.2 on Windows 2008 R2
    We have multiple Crystal and Webi reports developed from 1 universe and we need to copy these Crystal and Webi  reports to different folders in the same CMS  for example
    Universe Dev > Universe Folder Dev -  Crystal and Webi Reports set in Dev Folder
    Create a copy of the Dev Universe to Universe Folder Test – Copy the Dev Crystal and Webi Reports to Folder Test we need to Map it to the universe in the Test Universe folder(Copy of the Dev Universe)
    Create a copy of the Dev Universe to Universe Folder UAT– Copy the Dev Crystal and Webi Reports to Folder UAT we need to Map it to the universe in the UAT Universe folder(Copy of the Dev Universe)
    Create a copy of the Dev Universe to Universe Folder PROD – Copy the Dev Crystal and Webi Reports to Folder PROD we need to Map it to the universe in the PROD Universe folder(Copy of the Dev Universe)
    The reason for this is each of these universe are connected to a different database i.e Test, UAT, Prod and we have over 200 reports and at the moment we have to manually map each report to the new universe individual which take up hours.
    I have tried Lifecycle manager but came to the conclusion it cannot achive this
    You cannot change the universe attached to the Crystal and Webi reports
    you cannot promote Reports and Universes in the Same CMS to different folders
    you cannot change the folder even if you promote jobs between servers
    Does anybody know of a way to do this

    Hi,
    The way you should do this is to have 4 different BO systems, Dev, Test, UAT and Prod.
    Having this will allow you to use the same universe across all systems, but the connection to the database will be different on each system.
    Not only will this allow you to smoothly report off different data sources, but you will also be able to upgrade and make configuration changes without impacting your production system.
    Cheers,
    Josh

  • Unable to schedule webi report with Test user

    Hi All,
    I get the below error when i try to schedule a WEBI report with user id.
    I can schedule with my developer id.
    Error Message: Sorry, you do not have the right to 'Edit objects' (ID: 6) for 'sudes_errors' (ID: 45941). Please contact your administrator if you require this right. 
    Any inputs greatly appreciated.
    Thanks

    Error clearly showing that, Test user need access rights defined @ CMC.
    Contact BO admin, to assign Schedule/Full control rights for that Test user.
    Thank You!!
    H2H

  • Error generating Web service /BIC/CQZDS_WEB00001000 how to over come this?

    HI,
    Experts,
    I have created Web service source system by taking: target system BI and source system XI.
    After creation of Info objects i have created data source in RSA1 there will no error displayed while CHECK but while activating the data source it was displaying errors like:
    1) Error generating Web service /BIC/CQZDS_WEB00001000
    2) Error when activating DataSource ZDS_WEBSERVICE                BIDCLNT100
    what will be the reason for this error plezase provide me good idea or provide step by step web service scenarious.
    Thank you,
    Shabeer Ahmed.

    Hi
    Web AS 6.40 you can create a Web Service Proxy directly in Transaction SE80. Create a new package and right click on it. Choose Create -> Enterprise service / Web service -> Proxy object. Now you can choose how you want to provide the WSDL Source.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80fa3dff-ce76-2a10-3f94-f3df8f2db5a2

  • Designing the multi-source universe taking long time

    Hi
    I'm facing problem with IDT, when designing the multi-source universe time. It's so slow when I tried to click on dimension to change description in Business Layer.Universe backend is Oracle and SQL DB.
    How should I do to increase IDT performance at design time?
    Version IDT: 4.1 Support Pack 2

    Hi Sreeni,
    Do we have a single Adaptive Processing Server containing all services?
    How is the APS split and sized?
    Regards,
    Manpreet

  • BOXIR2 FP4.6 -WebI report with merged dimensions: Incorrect data

    Issue: BOXIR2 FP 4.6 -WebI report with merged dimensions: Max value of an object from second query is displayed in the report even when the formula is based on the object from the first Query.
    Data displays properly on BOXIR2 SP2.
    Steps to reproduce.
    1.Use u2018Island Resort Marketingu2019 Universe to create a WebI report.
    2. Create a Query with objects u2018Reservation Dateu2019 and u2018Future guestsu2019 and apply a query filter where the u2018Reservation Dateu2019 is between 1/1/2001 and 31/1/2001 an Run the query.
    3. Add a second Query with the same objects i.e. u2018Reservation Dateu2019 and u2018Future guestsu2019 and apply a query filter where the u2018Reservation Dateu2019 is between 1/1/2001 and 31/12/2001.
    4. Create a report variable MaxDate using the syntax "=Max([Query 1].[Reservation Date]) In Report"
    5. Use the objects u2018Reservation Date Query 2u2019, u2018Future guests Query 2u2019 and u2018MaxDateu2019 variable to create a table in the report.
    You will find the Maxdate column displays Max date values of u2018Reservation Date Query 2u2019 instead of u2018Reservation Date Query 1u2019.
    Could you please advice me on this issue.

    Hi Hiteshwar,
    MaxDate variable returns a maximum of Reservation date  from Query 1 i.e. 1/15/01 which is correct. If you put that variable separately it will display that date correctly but you are grouping it along with objects from the query2 thatu2019s why it is displaying correct value for Query 2 where it finds 1/15/01, but for other values WEBI canu2019t group this value as it refers its formula which contains Query 1 reservation date.
    Hence we canu2019t say it is displaying values from Query 2 it is taking values from Query1 itself  for 1/15/2001 and for remaining values it is taking non matching values from Query 2 with which it is grouping.
    If you put that variable with objects from Query1 it wonu2019t display 1/15/01 but all values reservation date from query 1 contains because it is grouping based on reservation date though it is single max value.
    Even when you write "=Max(Query 2.Reservation Date) formula and use it with objects from query 1 though it contains so many values it matches (Groups) only the values from reservation date from Query 1.and displays only those values i.e. 1/1/2001 and 1/15/01.
    MaxDate returns 1/15/01 as Maximum Date value from Query 1 but Query 2 contains value far more greater than 1/15/01 hense that will be more incorrect data if WEBI displays maxdate as 1/15/01 along with Query 2 objects.
    Here we can avoid this behavior by Custom SQL but MaxDate is a report level variable hence we canu2019t edit SQL.
    If your data contains some duplicate values WEBI will repeat MaxDate value like
    Reservation date     Restaurant           Future_Guests    Total Guests 
    1/1/01                          ABC                         3                   3     
    1/15/01                       XYZ                          4                   8    
    1/16/01                       XYZ                          4                   8  
    By default, WEBI Groups Total Guests based on the Restaurant and Reservation Date, but if we want we can group those values based only on Restaurant which will duplicate Total Guest values for Restaurant XYZ. But you report contains only one dimension with all unique Values we canu2019t group those.
    I hope this is clear.
    Thanksu2026
    Pratik

  • How to create Webi Reports with SAP BW Objects

    Hi,
    I have no knowledge on creating webi reports with SAP BW Objects like (InfoCube, DSO, MultiProvider, Infoview, MasterData Infoobject).
    As per my understanding Webi reports can be developed with universe which is created on BEx Queries or OLAP BAPI interface, unfortunately i don't have BEx App installed. So, i have to create OLAP universe in this case.
    Here my question is can we create universe with all the available BW objects like InfoCube, DSO, MultiProvider, Infoview, MasterData Infoobject.
    Please, Can anyone suggest a solution
    Thanks,
    Siva
    Edited by: siva@chinni on Apr 25, 2010 4:45 PM

    Hi,
    Yes we can create WebI on the top of SAP Objects - InfoCube, DSO, Characteristics etc...
    But we have to keep in mind that for WebI we must create Universe.
    When we create universe we make direct connection with SAP Objects but we get less functionality - such Calculated Key Figures, Restricted Key Figures, formulas etc. Now you have to achieve all these missing components at Universe Level and at WebI level.
    If you are creating your universe on the top of DSO and InfoObject then make sure they set for reporting.
    There are some online documentation which tells that what functionality you can achieve.
    Check the following document to have a bird's eye view.
    [http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/100369a7-033e-2c10-94a4-f254f8578153?quicklink=index&overridelayout=true]
    There is another document in PPT which I could  not find online. It is very helpful document. It is:
    II. SAP BusinessObjects BI Solutions XI 3.1 and SAP NetWeaver BW 7 Current risks, approach, and mitigating strategies for Client Partners, License Sales, and Consulting Delivery Managers
    Partner Enablement Seminar
    Regards,
    Bashir Awan

  • Webi Reports with BEx Limitations

    Hi,
    I want to know the limitations of Webi reports when the underlying universe is built on top of BEx Queries. For example, would the following in BEx queries work with Webi reports?
    Text variables in BEx Queries.
    Cell restrictions
    Authorization variables
    Thanks.

    Text variables in BEx Queries.
    You cannot use Text Variables in WebI snce they are not imported into SAP Universe.
    Cell restrictions
    Cell restriction again do not come Universe that is why the are not applied to WebI.
    Authorization variables
    I am not sure about authorization variable.
    Regards,
    Bashir Awan

  • How to connect Already created WebI reports with Xcelsius Dashboards

    HI Experts,
    My requirement it to bring data from already in use WebI reports to a consolidated Dashboard. I am aware of connecting universe with Dashboard with the help of QaaWS.
    Is there is any other way that we can connect our dashboard?
    We are thinking to publish those dashboards on the SAP Enterprise BI Portal.
    Thanks in advance!!!
    Edited by: BIBO_Apprentice on Aug 13, 2011 7:40 AM

    Hi,
    One can connect WebI reports with Xcelsius dashboards in 3 ways:
    1. Using QaaWS : connects universe with Dashboard. Dashboard uses the WSDL link to get data that works on SOAP (that works on exchanging web structures).
    2. Using Live Office Connection: With the help of Live Office one can connect the WebI reports directly. One can take advantage of the scheduled instances of the WebI reports. So it is good for time consuming reports.
    3. Using BI Web Services: Here custom web services are created of intended report instances. Publication is done from CMS side.
    after that WSDL is used as any other web services.
    Get back if you need any further clarification.

  • Scheduling WEBI reports with API

    Is it possible to schedule a WEBI report with an external API?
    Explanation: our customers can view their data on our internet site. We want to show a list of reports where they can subscribe. For example: report X with parameter Y each monday morning in Excel format to mailadress Z.
    This subscribtion is stored in our Oracle database. The database sends an API to the BO enterprise server. BO schedules and sends the report to the customer.
    Regards,
    Emiel

    Hi
            What is the API ? Is it a Text file ? if so then you can schedule the reports based on an event in BO .
    Regards
    Prashant

  • Building a JSP-based Web Report with a Parameter Form

    Hi,
    I tried in building a report as shown in the example in OTN under reports in the url
    http://otn.oracle.com/products/reports/htdocs/getstart/examples/ParameterFormJSP/index.html
    i.e for Building a JSP-based Web Report with a Parameter Form. The directions in this document were not clear and if any one document which is clear with instruction will be useful to me. In this example it is shown with search criteria with sigle text box and if any one had idea & code to place an combo box and population of the record group in the combo box.
    Thank you in advance.

    hi,
    we will be releasing a new example w.r.t creating a parameter form using the reports JSP within the next month.
    as for your request for a combo box. this widget is not available via regular HTML form elements. you can either have a select list or dropdown list.
    for a regular select list you would use the following (only pseudo-code)
    <select ...>
    <rw:foreach>
    <option value="<rw:field .../>">
    </rw:foreach>
    </select>
    to populate a select list.
    regards,
    philipp

  • Saving WebI report with links to desktop in pdf format

    I have a user who is asking if a WebI report with drill down links can be saved to his desktop as a pdf and still have the links work. Has anyone had the same request?

    it´s ocurrs because the drill down that you have in the query, try with another query and export this to a PDF and if you can access ... is that is not possible to use the link for a drill down in a PDF.
    good luck!

Maybe you are looking for