Error generic data source for table VBAK in SAP R/3  7.01

Hi
When I was trying to create  generate data source(RSO2) from table VBAK. The system replies that
Invalid extract structure template VBAK of Data Source ZSD_SALES
You tried to generate an extract structure with the template structure VBAK. This operation failed, because the template structure quantity fields or currency fields, for example, field ZZLFAMT refer to a different table.
Use the template structure to create a view or DDIC structure that does not contain the inadmissable fields.
Regards
Anand Reddy

Hi,
use 2lis_11_vahdr instead.
But in addition, you need to create a view on vbak and the reference table/s of the keyfigure units, add the unit fields as well as all fields of vbak to the view and use the view for the generic datasource instead of the table.
Siggi
Edited by: Siegfried Szameitat on Oct 5, 2010 2:46 PM

Similar Messages

  • Doubt in Generic data sources for hierarchy & text

    Hi All,
    I have a couple of doubts as mentioned below.
    1 . Why we canu2019t generate generic data source for hierarchy?
    2. While creating Generic datasource for text there is one more option is available i.e. "Extraction from domain"
           what is domian please explain .
    Thanks & Regards,
    Saurabh Bansal

    Hi,
    1.We can't maintain Hierarchies in ECC, Because the Database design of the OLTP system is based on ERM(Entity Relationship       Model),i.e Tables are connected via Primary and Foriegn key relationships, Whenever we need 1: Many connection divide the data in different tables,connect  them using the primary and foriegn key relationships.
    2. Domain will provide the technical properties of the Field of the R/3 table.
    for Eg: length,data type of the field.

  • Generic Data Source for Hierarchies

    Hi guyz,
    Can any body tel how to create generic data source for hierarchies, plz give me the steps to do it.
    Thanks & Regards
    Veera

    1. Generate the DataSource for FI-SL sets using the BW IMG (Transaction BW07).
    2. FI-SL sets are not compounded in OLTP. If you want to extract FI-SL sets for a coumpound characteristic in BW, proceed as follows:
    a) Select the 'BW InfoObject (characteristic) is compounded' field and enter a data element (compound information of the meta data).
    b) After generating the DataSource, execute compounding in a customer exit. To do this create, a project for the SAP enhancement RSAP0001 in Transaction CMOD, and program EXIT_SAPLRSAP_004 (ZXRSAU04) as described in the attachment.
    3. Execute the following steps in BW:
    a) Update the meta data for the FI-SL sets in the InfoSource tree.
    b) Maintain the transfer structure and transfer rules.
    c) If the extracted set hierarchies contain intervals, you must allow intervals in hierarchies for the characteristic in BW. Check the hierarchy properties of the characteristic in Transaction RSD1 and set the "Intervals in hierarchies allowed"
    4. With this solution you can only extract sets created in Transaction GS01 (set class 0000).
    If the hierarchy list in BW for the set data source is empty, first check in the OLTP system whether set class 0000 contains suitable sets at all. To do this, start Transaction GS02 (not GS03!). Field Set class may be displayed; if this is the case, enter 0000 there. Position the cursor on field Set name and select F4. Enter the table and field name you specified in Transaction BW07 in popup "Select sets" and select "Continue (Enter)". If message GR003 "An appropriate object was not found" is displayed, the hierarchy list in BW is also empty.
    5. For CO groups (set class 01xx), the following DataSources are contained in the standard delivery
    ·     0ABCPROCESS_0107_HIER                    Business process
    ·     0ACCOUNT_0109_HIER                       Account number
    ·     0ACTTYPE_0105_HIER                       Activity type
    ·     0COORDER_0103_HIER                        Order
    ·     0COSTCENTER_0101_HIER                    Cost center
    ·     0COSTELMNT_0102_HIER                     Cost element
    ·     0PROFIT_CTR_0106_HIER                    Profit Center
    ·     0STKEYFIG_0104_HIER                      Stat. key figure
    On principle, sets can also be created for the DDIC fields of these objects in R/3 GS01.
    From Release 4.0, this no longer makes sense since the CO groups can then be used anywhere in FI-SL.
    With regard to the conversion of sets to CO groups in Release 4.0, please refer to the FI-SL-VSR Release Information for 4.0A and Notes 92029 and 51132.
    6. For other set classes, no DataSources are delivered.

  • Finding the Generic data source for vendor master.

    Hi,
    I am trying to find the generic data source for 0VENDOR Infoobject on R3. But I am not able to find the exact match. Can any one help me? I just started on BW!!.
    Thank you

    Hi Tippireddy,
        you want to extract the vendor information through the business content then go through the following navigation...
      T.code RSA5 -> MM-IO (Master data Materials Management in general) -> 0VENDOR_ATTR or 0VENDOR_LKLS_HIER or 0VENDOR_TEXT these three are the standard data source for vendor.
    Regards,
    PRK

  • What is a Standard Data Source for table T006A?

    Dear Experts,
    As a part of one requirement I need to pull the data from Table T006A which is available in BW as well.
    I did many search on forums before posting the same but didnt get clear idea.
    I am aware how Units are being updated withing BW but I need to pull the text for all Units within BW.
    Do we have any standard Data Source which pulls the data from T006A table?
    Thanks in Advance,
    Nilesh

    Dear Raf Boudewijns,
    Requirement is to load the Unit texts(available in table T006A) into one custom InfoObject.
    I know this table is already pulled within BW and frequently being updated but didnt get any Standard Data Source which fetches the data from T006A table.
    I can create a new Generic Data Source within BW itself based on table T006A. But would like to use Standard Data Source if its available else will have to create a new generic Data Source.
    Thanks,
    Nilesh

  • BW Master data delta generic data source for further update in BW

    Hi BWers,
    I am looking for an option to load delta from Master data to another master data within BW. Export data source option for master data only has full load option but no delta update possible.
    I tried creating generic data source delta enabled on view of master data (/BI/M). But the problem I am facing now is master data contains quantity field as attribute and this field refers another table RSDKYF for unit. To be able to create data source on view / table no field should refer field in another table.
    Did anybody create delta for master data for further loading within BW or came across similar issue with key figures, please let me know the best procedure in this scenario? Appreciate your quick response.
    Regards,
    Madhav

    In your master data attribute have a date field which will be filled by the R/3 load as sy-datum - then create an export datasource and in the infopackage - give a selectoion for the date field as sy-datum and sy-datum -1..
    Not exactly a delta but then usually master data is not kept as delta because the volumes are usually less - you can achieve delta by this method...

  • Data Source for Table CRM_KNVH_TEMP

    Hello Experts,
    I have an issue related to the Hierarchy of Partner number. I have checked the data source like :-
    0CRM_BP_SALES_HIER
    0BPARTNER_HIER
    in the 0BPARTNER_HIER hierrachy, i didnt get the required data but in hierarchy 0CRM_BP_SALES_HIER there is the required data but when i executes the info package, it throws an error message of duplicate records. please tell me that how can i handle the duplicacy in the hierarchy. is there any data source for the table CRM_KNVH_TEMP so that i can directly use that Hierrachy DS for the info object
    also let me know whether it is possible if i can use the data souce 0CRM_BP_SALES_HIER in the info object 0BPARTNER.
    Thanks in advance
    neha

    Hi Pradeep,
    Please also check the following link,
    http://help.sap.com/saphelp_sm40/helpdata/EN/ab/bcc99b16db422e86af45b659712912/content.htm
    Regards,
    Amit

  • Generic data source for muliple level BOM

    Hi Bhanu & everyone,
    Whats the best way to create a gereic data source for muliple level BOM (STKO, STPO & MAST tables) in BW? I also need to maintain the history.
    Thanks,
    Aniruh.

    Hi Anirudh,
    You can create a view of those tables using transaction se11 and then create a datasource using transaction rso2.
    Hope this helps.
    Regards,
    Diego

  • How to create the generic data source for Labour costs report in BI (actual& plan costs)?

    Hello Guru's
    My requirement is to get the total labour costs in BEx analyzer.So i need to create custom DS for that. But i am not sure about the FICO tables which are having the Labour info..
    I'm having the GR10 report from R/3 sidepls look at the document. But i am not sure about the report, how that built,and giude me on the report.
    Please help on this to going forward.

    Hi,
    There are COOM data source which may suits your needs.
    please check data source
    0CO_OM_WBS_6
    0CO_OM_WBS_3
    Base tables are COSP and COSS.
    Check about coom data source, if not suitable then go for custom data source.
    About table cross verify with your source team.
    Thanks

  • Data Source for Table J_1IEXCDTL  & J_1IEXCHDR

    Hi,
    I suppose to extract data from J_1IEXCHDR & J_1IEXCDTL table to BI system.
    Can any body tell me is there any SAP provided Data Source is available for these table.
    As these tables are created during some patch upgradation only.
    Thanx in Advance.
    Point will be awarded for Good suggestion.

    Hey Kiran and Kumar....
    Do U got any solution.....  please do share....
    Is there anyone who can help.... as i am facing the same issue....
    ur assistance is rewarded....

  • Data Source for table CRMD_PARTNER

    Hi,
    Is there a standard BC data source in SAP CRM for getting partner function values for sales orders.
    (Partner Function, Sales order header, Sales Order Item, Business Partner,..)
    Thanks
    Pradeep

    Hi Pradeep,
    Please also check the following link,
    http://help.sap.com/saphelp_sm40/helpdata/EN/ab/bcc99b16db422e86af45b659712912/content.htm
    Regards,
    Amit

  • Need Data source for Table MARD with field LABST

    Hi,
    I am having field LABST from Table MARD.Can you just tell me from which data source This field exists.

    Check this thread :
    How to get the field from extract structure to datasource
    Regards
    Kiran Sure

  • How to get Delta field while going for a generic data source

    Hi all,
    We want to create a generic data source for tables involving MSEG,MKPF,SER03,OBJK and EQU by creating a view on these tables.
    fields we are mapping are ...
    MKPF          MSEG         SER03        OBJK       EQUI
    MBLNR        MBLNR       MBLNR     
    MJAHR        MJAHR        MJAHR
                       ZEILE          ZEILE
                                          OBKNR        OBKNR
    Can  any help us out in finding/creating a delta specific field,so dat we do deltas in BW after initial initialisations?
    Thanks all,
    Doug

    HI
    Try to use some time characterstic.
    Generic data will support the following delta's.
    Time stamp
    Calender day
    Numeric Pointer(for exmple doccument number,counter etc)
    regards,
    Chandra.

  • Error while testing Generic Data Source extraction

    I've created generic data source for Texts and Attributes in R/3 based on VIEW (Z table)
    I get  error "Error 6 in function module RSS_PROGRAM_GENERATE" while trying to test the data sources through RSO2
    I guess there can be a lot of reasons... Please name me anybody who knows them...
    thanx in advance

    Hi,
    Please Check the OSS note 328948 and it provides solution to same error what you have. Additionally you can have a look into this OSS note 705212 too.
    Syntax error in the generated extraction program Symptom
    You notice the error by one of the following symptoms:
    The loading of transaction data from an R/3 system terminates with a syntax error in the generated extraction program. The monitor displays the error messages:
    R3027 "Error & during the generation of the data transfer program"
    RSM340 "Error in the source system"
    The extraction within the extractor checker terminates with error message RJ028 "Error 6 in function module RSS_PROGRAM_GENERATE".The activation of transfer rules ends in BW with error message RG102 "Syntax error in GP$ERR$, row... (-> long text)" from the source system. Usually, the diagnosis in the long text of the error message is: "...could not be interpreted. Possible error causes: Incorrect notation or... "
    Other terms
    OLTP, extractor, data extraction, DataSource, Service API, SAPI,
    R3 027, R3 27, RSM 340, RJ 028, RJ 28
    Reason and Prerequisites
    The error only occurs in the source system, if this contains Basis Release 3.1I and Service API (SAPI) 3.0C Support Package 6. SAPI 3.0C Support Package 6 is contained, for example, in PI 2003.1 Support Package 7 (see attached composite SAP note 673002).
    Solution
    To correct the problem you need service API 3.0C Support Package 7 in the affected source system. The attached composite SAP note 704971 explains in which software components service API 3.0C is contained, and what the corresponding Support Packages of these components are.
    Alternatively, you can also copy the advance correction from the appendix.
    Hope it helps.
    Regards

  • Generic Data Source Error

    Hi
    when i want to create a Generic data source for T001S table by using the Extraction from View.
    when i saved it is thorowing Error Pool or Cluster Table is not allowed.
    Please let me know how i can create data source for Pool or cluster table.
    question 2   how i can create data source from Extraction from Query.
    how i can create Infoset Query.
    Regards
    Atul
    Moderator message: BI related, please ask in the appropriate forum.
    Edited by: Thomas Zloch on Oct 27, 2010 6:12 PM

    Hi,
    first go to ROOSFIELD and
    NEter your datasource name in oltpsource and check your field BPRME. what is its status in Selection.
    You have to make it 'X'.
    For that,You need to create an ABAP program in se38 and execute the attached code.
    update roosfield
    set selection = 'X'
    where oltpsource = V_PROD_TRADE
    and   field      = BPRME
    and   selection  = 'A'
    and   objvers    = 'A'.
    Hope i m clr.
    Regards,
    San!

Maybe you are looking for

  • Hard disk test failed on HP Pavillion dv6-1100eo notebook

    I have a HP Pavilion dv6-1100eo Entertainment Notebook PC  (P/N: NR597EA) with Vista 32-bit.  Unfortunately no warranty left in and general I have been very happy with this notebook. However suddenly Wondows would not start up - and it did not even f

  • Mail account name error

    I had some problems with an email account in Mail.app so i deleted the account. When i wan't to add a new account and give it the same name the account i deleted had it gives me the message; Error You already have an account named: "xxx". I tried del

  • Why does my iPad 1 not hold a charge

    For past couple of days ipad1 won't hold it's charge for more than an hour or so, charged it overnight and seemed to be ok but quickly drained. Any advice would be welcome.

  • I need help with an iCal error that I'm getting!

    I am getting the following error message: "Dates to iCal run.app Could not run this script because..." The rest of the error message is written in characters that I don't understand. It may be binary code. I would appreciate any help you can provide.

  • After a recent software update my iphoto program no longer responds and freezes  the my imac

    After a recent software update I opened iphoto and was asked if I would like my photos geographic location used for mapping where photos were taken, I answered no and now Iphoto no longer responds and freezes all computer functions. Unable to force q