Error: Get ProcessList FAoled 80004005, When I start the MMC

Hi Everyone,
I am to sap. Present Env is WIndows,oracle8.1.7,sap4.7EE
when i am going start sap server it is giving
Error:Get ProcessList FAoled 80004005,Unspecified error. How to fix this. Thank u for replies in advance.

Hi:
Open MMC, ignore the error and then wait a few seconds and start the instance, after that point to your SID (select the SID) and SAVE the MMC snap-in.
This should fix your problem.
Regards,
Federico

Similar Messages

Why is the error console is opening now when i start the browser. It has a series of entries in it.

The error console opens on top of the Browser window when I first open it and has a series of entries in it.

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

When I start the Mozilla Firefox I get error message "ReferenceError: Globalstorage is not defined." How to solve this problem?

When I start the Mozilla Firefox I get error message "ReferenceError: Globalstorage is not defined." How to solve this problem?
-Vinayak

Disabling Samsung Caster add-on solved this issue for me.

Hi all, I'm trying this morning to make the backup of my iPhone from 32 gigabytes. When I start the synchronization and backup I get written'' iTunes could not back up iPhone because an error occurred. I tried it on another iphone (4) and everything works

Hi all, I'm trying this morning to make the backup of my iPhone from 32 gigabytes. When I start the synchronization and backup I get written'' iTunes could not back up iPhone because an error occurred. I tried it on another iphone (4) and everything works fine. I can not reset the device because I have too much important data on it. Please help me.
Salve a tutti, sto cercando da stamattina di effettuare il Backup del mio IPhone da 32 gigabyte. Quando avvio la sincronizzazione e il Backup mi esce scritto '' iTunes non ha potuto eseguire il backup di Iphone perche si è verificato un errore. Ho provato su un altro iphone (4) e tutto funziona correttamente. Non posso ripristinare il dispositivo perchè ho troppi dati importanti sopra. Vi prego aiutatemi.

Ok I tried to delete the backup by using your location via preferences, but I did not find any file, maybe because I've already deleted following the path to the disk. I repeat that I have 2 devices and the problem only occurs on one

My time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

my time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

A "clicking noise" is often a sign that a hard drive is malfunctioning. Suggest that you power down the device and take it to an Apple store to have them take a look, or contact Customer Service at Apple for instructions.

I get this message when i start the computer :" error : unable to start the bluetooth stack service"

i get this message when i start the computer :" error : unable to start the bluetooth stack service"

If a power cycle of the TC works then the issue is simply Lion.. and there is as yet no fix.. and may never be..
Apple do not seem to acknowledge the issue but plenty of people have it.. It doesn't happen with SL.. one very good reason to not bother with Lion.. Maybe ML will fix it.. without Apple having to ever admit an issue.
In the meantime, if possible downgrade TC to 7.5.2 .. it has less issues than 7.6 or later.
Reset the TC and change all names, TC and wireless names, to short, no spaces, no special characters.
If it is the main router, set the dhcp lease to a short time.. 10min I recommend.
The above will probably not fix the issue.. but it might go a bit longer before a reboot is needed.. going back to SL would fix it.

SOA_INFRA application not getting initialized when I start the soa_server

Hi,
I have created a Weblogic Domain, with SOA server and BAM server. After starting the Admin Server, when I start the Managed Server (soa_server). I get the following exception in the console:
<Jan 21, 2011 8:38:09 PM IST> <Error> <Deployer> <BEA-149205> <Failed to initia
ize the application 'soa-infra' due to error java.lang.ClassNotFoundException:
avax.wsdl.WSDLException.
java.lang.ClassNotFoundException: javax.wsdl.WSDLException
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: javax.wsdl.WSDLException
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
Truncated. see log file for complete stacktrace
>
Though the soa_server is up and running I do not see the SOA tree structure of Farm_<domain_name> from the EM.
Please advice as to what can be done to get the library having WSDLException class or is it someother problem ?

Make sure that you have installed SOA 11.1.1.3.0 on Weblogic 10.3.3
Post the version of softwares you have installed, here?
Regards,
Anuj

When i open a new tab i get a tab with 2 blue bars, instead of one - the one on top of the site - and a little firefox dropdown - and when i start the next session firefox crashes???

When clicking a link - a new tab opens. But the new tab which opens looks wired: There are 2 blue bars - the one you get on each session(where the red x is which closes everything) - I don`t know how you call this. This 2nd blue bar is located directly under the "normal" one and has got - on the left hand side- a firefox dropdown menue(when you click it you get: New Tab, Start private browsing, edit, save page as and so on.
I can close the session as always but when i start the next session a view hours or a day later then firefox opens all the tabs from the session before as individual windows - and then it crashes. This happens 2 or 3 times - then i see a window where i am asked to either restore the old session(which doesn`t work - it always crashes again) or start a new session - which works.
This is very annoying. Please tell me what to do.
Thank you
richard

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js [2] and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well. 
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js

Why do I get a black screen when I start my macbook pro?

why do I get a black screen when I start my MacBook pro?

Hello szimmerli2 and welcome to Apple Support Communities,
It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.

HT3986 I installed windows 7 successfull, but when I start the mac in windows I does not see the wifi, and others things. How do I get the drivers?

I installed windows 7 successfull, but when I start the mac in windows I does not see the wifi, and others things. How do I get the drivers?
I remember that with Snow Leopard you could download them from the Apple website.
Cheers!

Read the Boot Camp Documentation while you run Boot Camp Assistant to download the Windows Support Software which was the first step in the Boot Camp Setup procedure.

One node is up but when we start the crs on node 2 then ASM instance killed.

Hi Friends
i am facing below strange problem
one node is up but when we start the crs on node 2 then ASM instance killed. i found that one ip 169.254.98.19 is binding with private interconnect IP rathter than assigned IP.
Please help me

Hi Pradeep ,
Oracle S/W verstion is 11.2.0.3. Actually , we start the CRS and DB on node 1 but when we try to start on node 2 , getting below error.
[gpnpd(18284748)]CRS-2328:GPNPD started on node ggnetp04.
2013-09-03 19:48:29.162
[cssd(17694820)]CRS-1713:CSSD daemon is started in clustered mode
2013-09-03 19:48:30.557
[ohasd(13697160)]CRS-2767:Resource state recovery not attempted for 'ora.diskmon' as its target state is OFFLINE
2013-09-03 19:48:41.013
[cssd(17694820)]CRS-1707:Lease acquisition for node ggnetp04 number 2 completed
2013-09-03 19:48:42.490
[cssd(17694820)]CRS-1605:CSSD voting file is online: /dev/rhdiskpower0; details in /opt/app/11.2.0.3/grid/log/ggnetp04/cssd/ocssd.log.
2013-09-03 19:48:45.483
[cssd(17694820)]CRS-1601:CSSD Reconfiguration complete. Active nodes are ggnetp03 ggnetp04 .
2013-09-03 19:48:47.257
[ctssd(18022612)]CRS-2403:The Cluster Time Synchronization Service on host ggnetp04 is in observer mode.
2013-09-03 19:48:47.632
[ctssd(18022612)]CRS-2407:The new Cluster Time Synchronization Service reference node is host ggnetp03.
2013-09-03 19:48:47.633
[ctssd(18022612)]CRS-2401:The Cluster Time Synchronization Service started on host ggnetp04.
[client(16056466)]CRS-10001:03-Sep-13 19:48 ACFS-9391: Checking for existing ADVM/ACFS installation.
[client(16056468)]CRS-10001:03-Sep-13 19:48 ACFS-9392: Validating ADVM/ACFS installation files for operating system.
[client(16056470)]CRS-10001:03-Sep-13 19:48 ACFS-9393: Verifying ASM Administrator setup.
[client(16056472)]CRS-10001:03-Sep-13 19:48 ACFS-9308: Loading installed ADVM/ACFS drivers.
[client(16056478)]CRS-10001:03-Sep-13 19:48 ACFS-9154: Loading 'oracleadvm.ext' driver.
[client(16056486)]CRS-10001:03-Sep-13 19:48 ACFS-9154: Loading 'oracleacfs.ext' driver.
[client(16056494)]CRS-10001:03-Sep-13 19:48 ACFS-9327: Verifying ADVM/ACFS devices.
[client(16056498)]CRS-10001:03-Sep-13 19:48 ACFS-9156: Detecting control device '/dev/asm/.asm_ctl_spec'.
[client(16056504)]CRS-10001:03-Sep-13 19:48 ACFS-9156: Detecting control device '/dev/ofsctl'.
[client(16056508)]CRS-10001:03-Sep-13 19:48 ACFS-9322: completed
2013-09-03 19:48:59.667
[ctssd(18022612)]CRS-2409:The clock on host ggnetp04 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
2013-09-03 19:50:53.936
[cssd(17694820)]CRS-1662:Member kill requested by node ggnetp03 for member number 1, group DB+ASM
2013-09-03 19:50:57.493
[/opt/app/11.2.0.3/grid/bin/oraagent.bin(16777322)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/opt/app/11.2.0.3/grid/log/ggnetp04/agent/ohasd/oraagent_grid/oraagent_grid.log".
2013-09-03 19:50:57.494
[/opt/app/11.2.0.3/grid/bin/oraagent.bin(16777322)]CRS-5011:Check of resource "+ASM" failed: details at "(:CLSN00006:)" in "/opt/app/11.2.0.3/grid/log/ggnetp04/agent/ohasd/oraagent_grid/oraagent_grid.log"
2013-09-03 19:50:58.828
[/opt/app/11.2.0.3/grid/bin/oraagent.bin(16777322)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/opt/app/11.2.0.3/grid/log/ggnetp04/agent/ohasd/oraagent_grid/oraagent_grid.log".
2013-09-03 19:50:58.943
[/opt/app/11.2.0.3/grid/bin/oraagent.bin(16777322)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/opt/app/11.2.0.3/grid/log/ggnetp04/agent/ohasd/oraagent_grid/oraagent_grid.log".
2013-09-03 19:50:59.235
[/opt/app/11.2.0.3/grid/bin/oraagent.bin(16777322)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/opt/app/11.2.0.3/grid/log/ggnetp04/agent/ohasd/oraagent_grid/oraagent_grid.log".
2013-09-03 19:53:00.252
[cssd(17694820)]CRS-1662:Member kill requested by node ggnetp03 for member number 1, group DB+ASM
2013-09-03 19:53:03.101
[/opt/app/11.2.0.3/grid/bin/oraagent.bin(16777322)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/opt/app/11.2.0.3/grid/log/ggnetp04/agent/ohasd/oraagent_grid/oraagent_grid.log".
2013-09-03 19:53:03.102
[/opt/app/11.2.0.3/grid/bin/oraagent.bin(16777322)]CRS-5011:Check of resource "+ASM" failed: details at "(:CLSN00006:)" in "/opt/app/11.2.0.3/grid/log/ggnetp04/agent/ohasd/oraagent_grid/oraagent_grid.log"
2013-09-03 19:53:05.430
[/opt/app/11.2.0.3/grid/bin/oraagent.bin(16777322)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/opt/app/11.2.0.3/grid/log/ggnetp04/agent/ohasd/oraagent_grid/oraagent_grid.log".
2013-09-03 19:53:05.539
[/opt/app/11.2.0.3/grid/bin/oraagent.bin(16777322)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/opt/app/11.2.0.3/grid/log/ggnetp04/agent/ohasd/oraagent_grid/oraagent_grid.log".
2013-09-03 19:53:05.815
[/opt/app/11.2.0.3/grid/bin/oraagent.bin(16777322)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/opt/app/11.2.0.3/grid/log/ggnetp04/agent/ohasd/oraagent_grid/oraagent_grid.log".
2013-09-03 19:55:07.436
[cssd(17694820)]CRS-1662:Member kill requested by node ggnetp03 for member number 1, group DB+ASM
2013-09-03 19:55:09.673
[/opt/app/11.2.0.3/grid/bin/oraagent.bin(16777322)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/opt/app/11.2.0.3/grid/log/ggnetp04/agent/ohasd/oraagent_grid/oraagent_grid.log".
2013-09-03 19:55:09.674
[/opt/app/11.2.0.3/grid/bin/oraagent.bin(16777322)]CRS-5011:Check of resource "+ASM" failed: details at "(:CLSN00006:)" in "/opt/app/11.2.0.3/grid/log/ggnetp04/agent/ohasd/oraagent_grid/oraagent_grid.log"
2013-09-03 19:55:12.007
[/opt/app/11.2.0.3/grid/bin/oraagent.bin(16777322)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/opt/app/11.2.0.3/grid/log/ggnetp04/agent/ohasd/oraagent_grid/oraagent_grid.log".
2013-09-03 19:55:12.115
[/opt/app/11.2.0.3/grid/bin/oraagent.bin(16777322)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/opt/app/11.2.0.3/grid/log/ggnetp04/agent/ohasd/oraagent_grid/oraagent_grid.log".
2013-09-03 19:55:12.389
[/opt/app/11.2.0.3/grid/bin/oraagent.bin(16777322)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/opt/app/11.2.0.3/grid/log/ggnetp04/agent/ohasd/oraagent_grid/oraagent_grid.log".
2013-09-03 19:55:12.405
[ohasd(13697160)]CRS-2807:Resource 'ora.asm' failed to start automatically.
2013-09-03 19:55:12.405
[ohasd(13697160)]CRS-2807:Resource 'ora.crsd' failed to start automatically.
2013-09-03 20:23:32.040
[ctssd(18022612)]CRS-2409:The clock on host ggnetp04 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.

TS1440 Flashing question mark when I start the MacBook

Hello!, I have a MacBook Pro but there was a flashing question mark when I start the MacBook, it does not go away, I have read the tips on you all site, but I can't find anything, it is for the Mac, not for a MacBook. Can anyone help me please?? Thanks!

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I downloaded the last version of Flash Player this morning (in Europe) but when I start the Install Adobe Player.app it crashes every time !

I downloaded the last version of Flash Player this morning (in Europe) but when I start the Install Adobe Player.app it crashes every time (I already unsinstalled the last Flash version and re-installed the new version many times but it doesn't work) and I always get this message (it's a summary because the real one is very very long - if you want the long version to help me with all the " facts ", just ask - thanks in advance " :
Process:         Install Adobe Flash Player [1292]
Path:            /Volumes/VOLUME/Install Adobe Flash Player.app/Contents/MacOS/Install Adobe Flash Player
Identifier:      com.solidstatenetworks.awkhost
Version:         3.3.6.0 (3.3.6.0)
Code Type:       X86 (Native)
Parent Process: launchd [206]
User ID:         501
Date/Time:       2013-02-08 15:28:46.957 +0100
OS Version:      Mac OS X 10.8.2 (12C60)
Report Version: 10
Interval Since Last Report:          2909 sec
Crashes Since Last Report:           10
Per-App Interval Since Last Report: 15 sec
Per-App Crashes Since Last Report:   3
Anonymous UUID:                      9F1AAA7D-58CF-CECE-AA15-31385DEBF4E2
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
VM Regions Near 0:
--> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL /Volumes/VOLUME/Install Adobe Flash Player.app/Contents/MacOS/Install Adobe Flash Player
    __TEXT                 0000000000001000-0000000000050000 [ 316K] r-x/rwx SM=COW /Volumes/VOLUME/Install Adobe Flash Player.app/Contents/MacOS/Install Adobe Flash Player
Model: MacBookPro6,1, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.57f16
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54333531533641465238432D47372020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54333531533641465238432D47372020 "

I went on the Adobe website and I found this which helped me completely (thank to you Kaolay001) :
17.
Kaolay001
8 feb. 2013 07:20   in reply to Hmalina
http://forums.adobe.com/message-abuse!input.jspa?objectID=5057993&objectType=2
Report
How i solved:
1 Mount the Flash Player installer .dmg file
2 Copy the "Install Adobe Flash Player" file to desktop or any other directory as preferred
3 Open terminal and cd to desktop or the other directory
4 Run the following command on terminal: sudo ./Install\ Adobe\ Flash\ Player.app/Contents/MacOS/Install\ Adobe\ Flash\ Player
5 Insert the password when asked

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

When I start the program I instantly see this message: "Adobe Bridge encountered a problem and is unable to read the cache, please try purging the central cache in cache preferences to correct the situation". I have tried this and it only results in a s

When I start the program I instantly see this message: "Adobe Bridge encountered a problem and is unable to read the cache, please try purging the central cache in cache preferences to correct the situation". I have tried this and it only results in a stalled/locked program. I have tried restarting my machine multiple times and tried reconfiguring how the cache is managed. Do you have anyone who could walk me through each step to correct this problem which just started two days ago. I have owned this program for at least a year now...

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Error: Get ProcessList FAoled 80004005, When I start the MMC

Similar Messages

Maybe you are looking for