Error getting CSS support information for driver [com.hyperion.ap.hsp.HspAd

Hi everybody, I have the next message:
Error getting CSS support information for driver [com.hyperion.ap.hsp.HspAdmDriver]
when I try to make a DB connection from Financial Reporting Studio in my local machine. In the server everything works fine.
EPM 11.1.2.1
Oracle 11g
Windows Server 2008
Does anyone have an idea on how to fix it?
Thanks in advance.
Israel Fuentes
[email protected]

Did you ever get this resolved? I am having the same issue. I suspect firewall.
thanks,

Similar Messages

  • Error getting CSS support information for driver [HsvAdmDriver]

    Hi all,
    we have installed HFM on Win2003 x64 EE server. Everything is working correctly, but we are not able to create a connection to HFM data source in Web Analysis.
    Following error occurs:
    4010 Error: Error Getting CSS Support Information For Driver HsvADMDriver; Nested Exception Is: Com.Hyperion.Ap.APException:
    Does anyone know how to fix this?
    Regards,
    Vladino

    Hi Vladino,
    What version of HFM are you on?
    Do you have the ADM driver and HFM client installed on your Web Analysis server along with the HFM server and/or cluster being registered on the Web Analysis server?
    Regards,
    John A. Booth
    http://www.metavero.com

  • "Error getting CSS  support information for driver[HsvAdmDriver]" in HFM

    Can anyone suggest a workaround for the error message:
    "Error getting CSS support information for driver[HsvAdmDriver]"

    For anyone else experiencing this problem, install the ADM Client on the server(s) involved and restart the services. After this, we had no more problems in HFM

  • How do I get the user information for a page?

    I would like to display information about the person that created a page in CQ.  I know I can get the createdBy information from the page properties, but how can I turn that into a user object where I can get more detialed information about that user?

    If you are within an OSGi bundle you can use the SlingRepository Service. Now it depends how you develop your OSGi services and components. I use the maven scr plugin for this. With this plugin it is possible to get references to services with java annotaions.
    Example:
    @Component(name="SampleService",
            label = "SampleService",
            description = "SampleService",
            immediate = true, enabled = true, metatype = true)
    @Services({ @Service(value = SampleService.class) })
    @Properties({
    @Property(name = "service.description", value = "SampleService"),
    @Property(name = "service.vendor", value = ") })
    public class SampleServiceImpl implements SampleService
    @Reference(policy = ReferencePolicy.STATIC)
    private SlingRepository repository;
        public void openAdminSession() {
            Session session = null;
            if (repository != null) {
                try {
                    session = repository.loginAdministrative(null);
                    //do something here
                } catch (RepositoryException e) {
                    LOG.error("Unable to open admin session:" + e.toString());
                } finally{
                                              if(session != null){
                          session.logout();
    To access a service from a JSP page you can use the reference of the SlingScriptHelper. You have to use the <cq:defineObjects/> tag.
    Example jsp:
    <cq:defineObjects/>
    SlingRepository repository = sling.getService(SlingRepository.class);
    Session session = null;
            if (repository != null) {
                try {
                    session = repository.loginAdministrative(null);
                    //do something here
                } catch (RepositoryException e) {
                    LOG.error("Unable to open admin session:" + e.toString());
                } finally{
                                              if(session != null){
                          session.logout();

  • How to get the copyright information for an image?

    How would I get the copyright data from an image in the DAM?

    Assuming you are using image component[1] on a page and copyright is a string.    As a sample you could use [2] to get the copyright information.  I am not well versed with the API as there might be an better option to implement. But this just gives you an idea for the information you were looking for.
    [1] /libs/foundation/components/image/image.jsp
    [2]
    Node refNode = resource.getResourceResolver().getResource(ResourceUtil.getValueMap(resource).get("fileRe ference","")).adaptTo(Node.class);
    String copyRight = refNode.getNode("jcr:content/metadata").getProperty("dc:rights").getString() ;

  • Where do I get end of support information for SJSAS?

    I would like to get the release date of the application servers and date of end of support.
    Where could I get these information?

    Hi,
    You can find information about EOSL here:
    http://www.sun.com/service/eosl/
    If you want to know the list of EOL and EOSL'd product you need to contact your account rep or support.
    If you want to know the road map for GlassFish check GlassFish site:
    http://wiki.glassfish.java.net/
    Check:
    General Information
    Announcements
    RoadMaps - Upcoming releases
    Thanks
    -Yael

  • Error getting the EJB Handle for context name: User

    I am getting EJB Handle for context name: User.
    1) I specified ejb's and datasource in the ejb-jar.xml in the session tags.
    <session> </session>
    and I also included ejb's and datasource in the sun-ejb-jar.xml still I am getting the above error I am new to EJB how can I resolve this?

    What is the Oracle application server version?
    JDeveloper 11g supports direct deployment to Oracle Application Server 11g
    http://www.oracle.com/technology/products/jdev/collateral/papers/11/newfeatures/index.html

  • PBR Multiple Tracking Support information for Cat2960

                      Hello
    I have been investigating for PBR multiple tracking support devices specially Catalyst 2960.
    The following is very similar to this information. However it can not be applicable to Cat2960.
    [PBR Support for Multiple Tracking Options]
    http://www.cisco.com/en/US/docs/ios/iproute_pi/configuration/guide/iri_prb_mult_track_external_docbase_0900e4b1810fe379_4container_external_docbase_0900e4b181525fed.html#wp1056119
    But feature navigator can show the following information of this feature.
    [Feature Navigator for Cat2960]
    PBR Support for Multiple Tracking Options
    IOS:12.2(55)SE1
    Feature-Set:LAB-Base
    You can find it by using the research feature and filter by PBR.
    So which is correct ?
    Basically Cat2960 can not support PBR or there is any related information based on the feature navigator's info.
    Any information would be very helpful.
    Thank you very much and Best Regards,
    Masanobu Hiyoshi

    Hello Julio
    Thank you for your precious information!
    In my understanding it is conclution that the Catalyst 2960 & 2960S series
    basically do not support for PBR. So PBR multiple tracking also do not support right?
    Here is the output of Cat2960 and 3750X
    2960#sh sdm prefer
    The current template is "lanbase-routing" template.
    The selected template optimizes the resources in
    the switch to support this level of features for
    0 routed interfaces and 255 VLANs.
      number of unicast mac addresses:                        4K
      number of IPv4 IGMP groups + multicast routes:    0.25K
      number of IPv4 unicast routes:                              4.25K
        number of directly-connected IPv4 hosts:             4K
        number of indirect IPv4 routes:                            0.25K
      number of IPv6 multicast groups:                           0.375k
      number of directly-connected IPv6 addresses:        0.75K
      number of indirect IPv6 unicast routes:                  0.5K
      number of IPv4 policy based routing aces:             0
      number of IPv4/MAC qos aces:                            0.125k
      number of IPv4/MAC security aces:                      0.375k
      number of IPv6 policy based routing aces:             0
      number of IPv6 qos aces:                                     0.375k
      number of IPv6 security aces:                              127
    [3750X]
    As you know by default Cat3750X normally requires SDM template as routing for
    functioning PBR. Otherwise the number of IPv4 policy based routing aces
    does not increase.
    3750X(config-if)#ip policy route-map PBR
    Mar 30 01:34:21.869: %PLATFORM_PBR-4-SDM_MISMATCH: PBR requires sdm template routing
    3750X#sh sdm prefer
    The current template is "desktop routing" template.
    The selected template optimizes the resources in
    the switch to support this level of features for
    8 routed interfaces and 1024 VLANs.
      number of unicast mac addresses:                       3K
      number of IPv4 IGMP groups + multicast routes:    1K
      number of IPv4 unicast routes:                             10.875k
        number of directly-connected IPv4 hosts:           3K
        number of indirect IPv4 routes:                          7.875k
      number of IPv6 multicast groups:                        64
      number of directly-connected IPv6 addresses:      0
      number of indirect IPv6 unicast routes:                32
      number of IPv4 policy based routing aces:          0.5K
      number of IPv4/MAC qos aces:                          0.375k
      number of IPv4/MAC security aces:                   0.875k
      number of IPv6 policy based routing aces:          0
      number of IPv6 qos aces:                                  0
      number of IPv6 security aces:                           58
    So what could you think about the feature navigator's information related to this?
    Is it possible to modify it? or request to cisco for this?
    Best Regards,
    Masanobu Hiyoshi

  • NWDI Support Information for SAP MII

    Hi,
    The SAP MII application version 12.1 and beyond has integration with NWDI to manage query templates, display templates, transactions, and web pages. Does anyone know the correct component so the OSS tickets get directed to the right support groups?
    Any introduction information / links would help regarding transports as well.
    Thanks,
    Kevin

    Hello Kevin
    It is fine to raise a message in MFG-MII, and it will get rerouted to BC-CTS-DI if needed.
    The following article may be useful;
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0348c15-6ee6-2c10-f7a0-89c0fc2099ec?quicklink=index&overridelayout=true
    Thanks
    Kenny

  • HT3986 where do i get the support drivers for windows 7

    I am using boot camp assistan on my ty inch lion and it says i need drivers for windows7 where do i get them?

    Downloading the Windows Support Software is one of the first Boot Camp Assistant menu items. Start up Boot Camp Assistant again and select Download Windows Support Software.

  • Production order exist, but I can't get the detail information for order

    Hi expert,
        Today I met a question, when i create a production order, the number of the production order was created, but I couldn't search the production order number. In adddtion,  the production order can normally expolode routing and bom, and the message occured "The system updated,please delay".
       Expert, please help me solve the problem. I think there is something changes made in our sap system.
    Thanks a lot.
    George shi

    Is it a new program or an existing one that worked before?
    If it is new, possible that an error occurred during the creation, thereby the COMMIT WORK was not issued and saved in the database.  The document number was generated prior to the COMMIT WORK.
    Should get your abapper to have a look at it.
    Put a break-point after the Production Order is created, and prior to the COMMIT WORK.  Check for error messages that may have been captured by the program, but NOT reported to the user.

  • How to get the spool information for a job

    Hi,
    After a job is run, how to get the spool inforamtion. which API can be used.?
    Thanks in advance.
    Johnney.

    Hi,
    thanks for your reply.
    My requirement is as followings.
    1. Report Z_REPORT_TEST
    EXPORT RUNUUID = '****************' TO MEMORY ID sy-repid.
    2. In Funciton Module Z_FM_test
                create a job(Z_JOB_TEST) to run report 'Z_REPORT_TEST'.
                after the job is run successfully.
                question is
                how to get the RUNUUID exported from the report ????
    Thanks & Best Regards,
    Johnney.

  • How to get Sales rep information for each customer

    Hi
    For each record in ra_customers, I want to find associated Sales rep for each customer.
    Can some one please tell me what table stores this information?
    Thanks
    Aali

    Try
    SELECT rc.customer_name, rc.customer_number, jrs.NAME
      FROM jtf_rs_salesreps jrs, ra_customers rc
    WHERE rc.primary_salesrep_id = jrs.salesrep_idHope this helps,
    Sandeep Gandhi

  • In the search I phone screen how do you get rid of information for a particular contact. How do you erase that data

    In the search I phone screen the messages aren't deleting if I type a contacts name ther still listed.

    I would use a custom calculation script for each of the fields. Something like:
    // Calculation script for Baseline year
    (function () {
        // Get the value of the WCPYear field
        var v = getField("WPCYear").valueAsString;
        // Set this field's value. Set to blank if WCPYear is empty
        event.value = v ? v : "";
    // Calculation script for 5-year goal field
    (function () {
        // Get the value of the WCPYear field
        var v = getField("WPCYear").valueAsString;
        // Set this field's value. Set to blank if WCPYear is empty
        event.value = v ? +v + 5 : "";
    // Calculation script for 10-year goal field
    (function () {
        // Get the value of the WCPYear field
        var v = getField("WPCYear").valueAsString;
        // Set this field's value. Set to blank if WCPYear is empty
        event.value = v ? +v + 10 : "";

  • How do I get the following information for setting up AirPort Extreme?

    Getting these two messages when attempting to set up brand new Airport Extreme. Where do I get the information needed to resolve these problems?  Thank you

    The messages are related.
    What modem router do you have? Is it adsl and is it working in as router at the moment?
    The way apple run the Airport now is to try and take over as the main router.. this is not always possible and sadly because no choice is given you have to work through the setup again and deliberately force it to the correct setting.. ie off bridge mode.
    Assuming you do have a modem router..
    Click on edit settings on the bottom..
    Go to the internet tab and change it to dhcp.
    Go to the network tab.
    Change it from dhcp and nat to off bridge mode.
    The AE will then work as wireless AP and switch which is fine.
    Otherwise you need to bridge your modem and supply the pppoe info that the ISP passed to you.

Maybe you are looking for