Error: getting dev info for Tape - unrecoverable error

Hi,
I have configured a Oracle Secure Backup version 10.4.0.1.0_LINUX64.
It was working corretly until yesteday that i can't mount the tape because this error appears:
Error: getting dev info for Tape - unrecoverable error
I run this command with obtool:
ob> lsdev -lvg
***0 wst__set_mode: bus 0, target 0, lun 0: IBM,ULTRIUM-HH4,B6W1
***0 wst__get_sn: code=0x0
***0 wst__info: infolen=0xd8, info=0x7fff007bf050
***0 wst__dev_state...
***0 wst__exec: op=0 (nop), buf=0x0, count=1 (0x1), parm=0x0
ioctl_op=0x3, to=300, datalen=0x0, buf=0x0
cdb: 00 00 00 00 00 00 tur
***0 wst__exec: op=2 (sense), buf=0xd1e2ec0, count=96 (0x60), parm=0x0
ioctl_op=0x5, to=30, datalen=0x60, buf=0xd1e2ec0
cdb: 03 00 00 00 60 00 sense, cnt=96
***0 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
***0 wst__get_sense(int) cmd = 0, sense data:
70 00 03 00 00 00 00 58 00 00 00 00 53 00 36 00
00 00 00 00 00 02 20 20 20 20 20 20 00 20 00 00
00 00 1E 00 00 1C 62 1E 81 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 07 08 18 00 00 00 00 00 00
00 00 00 00 00 00 20 20 20 20 20 20 20 20 20 20
ec=0, sk=media err, asc=53, ascq=0
error is: unrecoverable error
flags: (none)
***0 wst__exec: rval=-1, status.code/resid/checks=0x20008111/0x0/0x0
***0 wst__exec: op=7 (readpos), buf=0x7fff007bee60, count=20 (0x14), parm=0x0
ioctl_op=0x5, to=180, datalen=0x14, buf=0xd1e2fc8
cdb: 34 00 00 00 00 00 00 00 00 00 read_pos
***0 wst__exec: op=2 (sense), buf=0xd1e2ec0, count=96 (0x60), parm=0x0
ioctl_op=0x5, to=30, datalen=0x60, buf=0xd1e2ec0
cdb: 03 00 00 00 60 00 sense, cnt=96
***0 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
***0 wst__get_sense(int) cmd = 34, sense data:
70 00 03 00 00 00 00 58 00 00 00 00 53 00 36 00
00 00 00 00 00 02 20 20 20 20 20 20 00 20 00 00
00 00 1E 00 00 1C 62 1E 81 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 07 08 18 00 00 00 00 00 00
00 00 00 00 00 00 20 20 20 20 20 20 20 20 20 20
ec=0, sk=media err, asc=53, ascq=0
error is: unrecoverable error
flags: (none)
***0 wst__exec: rval=-1, status.code/resid/checks=0x20008111/0x0/0x0
***0 wst__dev_state: code=0x20008111
***0 wst__info: code=0x20008111
Error: getting dev info for Tape1 - unrecoverable error
***0 wst__conn_type returning 1 (code 0x0)
***0 wst__close: wh=0x0
Tape1:
Device type: tape
Model: [none]
Serial number: 1068037161
In service: yes
Automount: yes
Error rate: 8
Query frequency: [undetermined]
Debug mode: yes
Blocking factor: (default)
Max blocking factor: (default)
UUID: c60554ca-0562-1030-8cdb-d4ae528eb115
Attachment 1:
Host: bosmgmt.bos.local
Raw device: /dev/sg3
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-HH4
Firmware: B6W1
Serial number: 1068037161
Hardware compression: not available
Hardware encryption: not available
Thanks in advance

It's reporting a hardware media error on the drive. Basically you've got a hardware fault.
Thanks
Rich

Similar Messages

Adobe Standard 9.5.2 after update I get "Insufficient data for an image" error

After updating to Acrobat Standard and Readre 9.5.2, some (but not all) of my pdf files are now opening with the error "Insufficient data for an image." The files open, but they are fuzzy, pixelated and are missing the bates stamp I applied earlier (using a utility from LexisNexis Casemap). I can open the files fine on another computer with Acrobat Standard 9.5.1.
How can I uninstall the 9.5.2, or get it to work again?

Windows 7 64-bit with Samsung SSD on an i5 Lenovo laptop. Yes, I have both Acrobat Standard and Reader 9.5.2 on the machine. Both give the same error when opening the attached file.
-Dan-
[email protected]
Date: Thu, 16 Aug 2012 23:06:52 -0600
From: [email protected]
To: [email protected]
Subject: Adobe Standard 9.5.2 after update I get "Insufficient data for an image" error
    Re: Adobe Standard 9.5.2 after update I get "Insufficient data for an image" error
    created by vamalik in Acrobat Installation & Update Issues - View the full discussion
Hi osieko,Can you share across any such sample pdf file? Also, what OS are you working upon?You have both Acrobat Standard 9.5.2 and Reader 9.5.2 installed on your machine. Right? One option that you can try is to repair your Acrobat/Reader from Programs in Control Panel and see if that resolves the issue.Otherwise kindly attach a screenshot of the error you are receiving along with any sample pdf file.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4627764#4627764
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4627764#4627764. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Error when loggong on for external ID "": Error during SAML 2.0 logon

Hi,
I'm getting be below error when trying to use SAML SSO for a ABAP Webdynpro page on a NW 7.4 system. When I access the page, it redirects to the identity provider, comes back to the page and it shows the logon page. I'm looking for any ideas of things I could look at.
N SAML20 SP (client 400): Incoming Response
N SAML20 Binding:          POST
N SAML20 IdP Name:         http://xxxxxx/adfs/services/trust
N SAML20 Status Code:      urn:oasis:names:tc:SAML:2.0:status:Responder
N SAML20 SP (client 400): Default ACS endpoint: https://xxxxxx/sap/saml2/sp/acs/400 , old default ACS endpoint
N SAML-Trace: CALL 'SAML login': SY-SUBRC = 222 , PWDCHG = 0
N *** ERROR => SAML-Trace: Path = /sap/bc/webdynpro/sap/oauth2_authority [sign.c       16519]
N {root-id=005056AD26DF1ED4B69880FF4BE51F68}_{conn-id=005056AD26DF1ED4B69880FF4BE53F68}_1
N *** ERROR => SAML-Trace: Returncode = 222 [sign.c       16519]
N *** ERROR => SAML-Trace: Message class = SAML number = 011 [sign.c       16519]
N *** ERROR => SAML-Trace: Message = Error when logging on for external ID "": Error during SAML 2.0 logon [sign.c       16519]
I have updated the service to use alternate logon procedure and added the handler CL_HTTP_EXT_SAML20
I have added the identity provider through transaction SAML2, but it does not seem to be working.
Here is a decrypted SAML assertion:
<samlp:Response ID="_9c844d84-8117-4851-8270-aeb12e935daf"
Version="2.0"
IssueInstant="2015-04-02T00:21:06.477Z"
Destination="https://xxxxxxxxx/sap/saml2/sp/acs/400"
Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified"
InResponseTo="S005056ad-26df-1ed4-b699-c4c630853f68"
xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"
>
<Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://xxxxxxxx.com/adfs/services/trust</Issuer>
<ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
<ds:SignatureMethod Algorithm="http://www.w3.org/2001/04/xmldsig-more#rsa-sha256" />
<ds:Reference URI="#_9c844d84-8117-4851-8270-aeb12e935daf">
<ds:Transforms>
<ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature" />
<ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</ds:Transforms>
<ds:DigestMethod Algorithm="http://www.w3.org/2001/04/xmlenc#sha256" />
<ds:DigestValue>08HK08VLpJC23JoQs+p+oHbDBvjRF+9NwBeowmlFTrY=</ds:DigestValue>
</ds:Reference>
</ds:SignedInfo>
<ds:SignatureValue>xxxxxxx</ds:SignatureValue>
<KeyInfo xmlns="http://www.w3.org/2000/09/xmldsig#">
<ds:X509Data>
<ds:X509Certificate>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</ds:X509Certificate>
</ds:X509Data>
</KeyInfo>
</ds:Signature>
<samlp:Status>
<samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Responder">
<samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:NoPassive" />
</samlp:StatusCode>
</samlp:Status>
</samlp:Response>

Hi Brian,
I am not sure but you could check below thread and couple of sap note.
Single Sign On - Sharepoint 2010 to SAP using ADFS
1799402 - Automatic account creation for SAML 2.0 SP
1257108 - Collective Note: Analyzing issues with Single Sign On (SSO)
It may help you to resolve / identify the cause of the issue.
BR
AKJ

Error getting a list of catalogs:unknown Error

Hi,
I have create universes on SAP BI dev system,they all wrking fine.Then i have stated to connect universe to SAP BI pro by changing the server infomation in connection.It was wrking fine i m able to change the information and then to connect respect query.but suddenly its started to show error:
"DBD:A runtime exception has occurred.(Error getting a list of catalogs:unknown Error)"
With changes connection information it was wrking fine and suddenly its started to show this error,I m not sure what could be the reason.And wht to do to resolve this.CAn anyone can help me in this?
Thanks,
Piyush

Hi,
Even i'm also facing the same error...
We are on.-
BO XI 3.1 SP2
BW 7 EP1 SP5
SAP_ABAP 7.1 SP5
In our case also, earlier it was working fine, but suddenly server/designer has started showing Empty Infocube list....
The above problem is present in our QA system.
Whereas DEV & PROD are working fine.
Your response is appriciated..
Regards,
Chitra H. Keluskar
Edited by: Chitra Keluskar on Dec 29, 2010 8:45 AM

Error in background job for program RSGET_SMSY error message No active job

Hello!
I would like to set up the Change Request Management functionality in SAP Solution Manager.
The only red warning by executing Test-button in Tcode SOLAR_ADMIN_PROJECT is:
<b>Error in background job for program RSGET_SMSY error message No active job found</b>
Can someone please tell me how to solve this problem?
(tcodes, technical steps)
Thank you very much!
regards
Thom

Thank you very much!
Can you also help me with the warning "Errors occurred during synchronization of the system landscape" in tcode SOLAR_PROJECT_ADMIN" --> System landscape --> Change requests --> "Refresh"?
The second issue I cannot see any projects in Tcode "/TMWFLOW/CMSCONF"
according to the SPRO-step "Set Project Assignment of Requests as Mandatory"
Thank you!
regards

Get More Info for NetConnection.Connect.Failed Error?

I have a single server that runs IIS and FMS, both on port 80. The server has two internal IPs assigned to it, one for IIS and the other for FMS. I also have two static public IPs. My router maps one public IP to IIS' internal IP and likewise for FMS.
IIS works fine. Using an online port scanner, I was able to determine that port 80 is responsive for both public IPs. Before I had configured my Adapter.xml and fms.ini, only IIS' public IP was responsive. This seems to indicate that FMS is fine.
However, when my ActionScript creates a NetConnection and calls connect(), my netStatus callback takes about half a minute to be invoked, and I get "NetConnection.Connect.Failed". Which is not very informative. Is there a way to get more info about the cause of the error? Also does anyone have suggestions for how to debug this issue?

Hi,
Thanks for trying out FMS..
I can guide you with few checkpoints to first see where the problem might be.
1. Go to the FMS installation directory and check for the logs folder. See all the logs (according to date) and find if the port bindings are all successful. This might tell us whether FMS actually has started or not.
2. FMS works on port 1935 for RTMP streaming. It also gets bundled with apache (listening on 8134) but one of the fms processes also takes hold of 80 for its tunneling streaming as well as redirecting to apache. So either you remove this entry from fms.ini or change it to reflect to some other port. ADAPTER.HOSTPORT is the variable to look for.
3. How are you making sure that FMS is working/not working ?
4. Please turn off your firewall or other secutiry for testing purposes to see if you are able to hit the FMS .
Let us know if any of the above are helpful in getting some more information.
Thank you !

How to get Alerts mail for adapter engine errors in SAP PI 7.0

Hi Friends,
I configured Alerts in PI 7.0. with the help of t-code u2018ALRTCATDEF and created a new alert catergory.
In container tab i have mentioned all give below elements.
SXMS_MSG_GUID, SXMS_RULE_NAME, SXMS_ERROR_CAT, SXMS_ERROR_CODE, SXMS_FROM_PARTY, SXMS_FROM_SERVICE, SXMS_FROM_NAMESPACE, SXMS_FROM_INTERFACE, SXMS_TO_PARTY, SXMS_TO_SERVICE, SXMS_TO_NAMESPACE,SXMS_TO_INTERFACE
I am getting alerts when I manually test the alerts configurations by running the report u2018RSALERTTESTu2019.
I am getting mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
But When I am getting a error , I am not getting an alert mail. Right now iam doing in XI Development.
I am not getting an Alert mail , when my message is in status of : System Error . Error catergory is : XI_J2EE_ADAPTER_JDBC.
Kindly tell how to get alert mail for error catergory : XI_J2EE_ADAPTER_JDBC and in Adapter engine errors.
How to get alert mail when my message is failed with any reason in Adapter engine.
Waiting for quick replay. Please help me out.
Regards,
Ahmed.

Hi thanks for quick reply.
As per your given link : http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14877. [original link is broken]
I have done all these steps. But still little problem.
as per link he is getting Error description , error message id , alert rule..
In my case I am not getting these information. when my messages failed. When I am doing manully testing the alert getting an mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
Is it okay the body of mail??.
I am not getting alert mail when my messages failed in adapter engine and Integration Engine.
Ex my message is failed in AE:as below.
My messages flow as : SAP --> XI --> DB.
Messages is success (in ECC moni)> XI moni also success> XI Adapter engine getting error as (Status: System Error) and (Error Category : XI_J2EE_ADAPTER_JDBC).
Regards,
Ahmed.

Get more info about the last errors in Oracle

Hi all,
There is a log in a live system where it is possible to see every minute the following error:
Sweep Incident[48073]: failed, err=[1858]
I know that error can happen mainly when:
1. Trying to insert caracter field in a numeric column
2. Using in the wrong way the function to_date()
I need more information about that error, what can be causing the error in the system and why. Is it possible to see more information about the last errors in Oracle? For example, if a query produces an error... is it possible to see in Oracle the error and the query that caused the error?
Hope you can help me.
Thanks in advance.

Thanks Niall.
I'm not sure if I got you...
What I found is that MMON makes snapshots of the database 'health' and stores this information in the AWR. So, it seems like in the database there could be a numeric column that is storing character fields, and when MMON works, it finds that error... is that right?
I found the following information:
SQL> select substr(s.username,1,18) username,
2 substr(s.program,1,22) program,
3 decode(s.command,
4 0,'No Command',
5 1,'Create Table',
6 2,'Insert',
7 3,'Select',
8 6,'Update',
9 7,'Delete',
10 9,'Create Index',
11 15,'Alter Table',
12 21,'Create View',
13 23,'Validate Index',
14 35,'Alter Database',
15 39,'Create Tablespace',
16 41,'Drop Tablespace',
17 40,'Alter Tablespace',
18 53,'Drop User',
19 62,'Analyze Table',
20 63,'Analyze Index',
21 s.command||': Other') command
22 from
23 v$session s,
24 v$process p,
25 v$transaction t,
26 v$rollstat r,
27 v$rollname n
28 where s.paddr = p.addr
29 and s.taddr = t.addr (+)
30 and t.xidusn = r.usn (+)
31 and r.usn = n.usn (+)
32 order by 1;
USERNAME PROGRAM COMMAND
oracle@airvs1b (MMON) No Command
SQL> select addr, pid, spid, username, serial#, program,traceid, background, latchwait, latchspin from v$process where program='oracle@airvs1b (MMON)';
ADDR PID SPID USERNAME SERIAL# PROGRAM
000000044A4E48A8 24 15372 oracle 1 oracle@airvs1b (MMON)
TRACEID B LATCHWAIT LATCHSPIN
---------------- ---------- ------------------------ --------------- 1
SQL> select
2 substr(a.spid,1,9) pid,
3 substr(b.sid,1,5) sid,
4 substr(b.serial#,1,5) ser#,
5 substr(b.machine,1,6) box,
6 substr(b.username,1,10) username,
7 b.server,
8 substr(b.osuser,1,8) os_user,
9 substr(b.program,1,40) program
10 from v$session b, v$process a
11 where
12 b.paddr = a.addr
13 and a.spid=15372
14 order by spid;
PID SID SER# BOX USERNAME SERVER OS_USER PROGRAM
15372 1082 1 airvs1 DEDICATED oracle oracle@airvs1b (MMON)
Is there any way I can see what MMON is doing and when is failing?
Thank you very much.
Edited by: user11281526 on 19-jun-2009 5:18

How to get the Count for no.of.errors

HI
BELOW IS MY CODE
LOOP AT I_RETURN INTO WA_RETURN.
IF WA_RETURN-TYPE ='E'.
    CONCATENATE SOURCE-AUFNR '|' SOURCE-VORNR '|'WA_RETURN-MESSAGE
                                                     INTO TEXT.
    WRITE:/ TEXT.
    COUNTER = COUNTER + 1.
ENDIF.
IM GETTING BELOW O/P
000090001366 0020 Enter another operation number
000090001366 0020 Error during processing of BAPI methods
000090001366 0050 Item categories in agreement and requisition incompatible
000090001366 0050 Error during processing of BAPI methods
NO.Of records In Error          4
My Requirement is if AUFNR and VORNR value is same then the count should be 1 , Like the o/p should be
NO.Of records In Error          2
because AUFNR and VORNR is same for 2 records , can any one tel me the logic to do this,
AUFNR and VORNR value is there in Internal Table

Hi All,
Thanks for the replies.
AUFNR and VORNR are in different tables so im putting them in one internal table
loop at itab into wtab.
    wtab-aufnr = wa_methods-objectkey.
    wtab-vornr = wa_operation-activity.
endloop.
now
IF WA_RETURN-TYPE ='E'.
now if aufnr and VORNR is same then i should get error message as said above
can any one tel me the logic

IW32: Error getting message (Text for order header not maintain in lang.EN

Hello All,
We just starting getting this message in IW32 and IW33 stating (Text for order header not maintained in language EN) then all the pre-existing description test disappeared.
We have not done any configuration change in this particular system.
Can anyone help to resolve this.
Thanks

Hi,
As with most SAP messages it is always a good idea to trust what it is saying.
The system is telling you that KG has not been created in the English language.
Go to transaction CUNI to check the settings.
Select the Unit of measure for "MASS" (from the drop down list) and check the entries for UOMs.
KG should be there and should have an English description (the message said it was not there for EN)
If it is there and set up correctly then there might have been something else in the UOM field? You didn't enter " KG" did you (a blank character then KG?)
Steve B

Cisco SASD Problem - Error getting view XML for window, The underlying connection was Closed

Dears,
I have a error message when I try to view video wall from Cisco SASD. this issue cause the application immediately closed and Cisco SASD showing the login page again.
kindly help me to resolve this issue.

we need to look at PC wise and as well VSM side. i'm not sure why xml error is popping up. it could be different issue. need to look at the logs with VSOM, system configuration and Debug logs to understand, at what instant the error is triggered. so that we could understand how the xml is handled by VSOM.
I'm sure you have uninstalled and re-installed the SASD?
i would suggest to open up a TAC case since this needs much more of insight of logs or help me with above logs.

Error getting while adding BI patch (SQL error 1089 accessing)

Dear Experts ,
here i faced one problem while adding BI patch to newely installed system
the error is at phase import_proper below are shown error log
/usr/sap/trans/log/SAPI-704IFINBICONT.LBD
ERROR LOG
Start import R3TRFUGR/POSDW/CONVERSION_XML ...
1 entry for TADIR updated (R3TRFUGR/POSDW/CONVERSION_XML ).
2 entries from TFTIT deleted (pname /POSDW/SAPLCONVERSION_XML)
7 entries from FUPARAREF deleted (pname /POSDW/SAPLCONVERSION_XML)
2 entries from ENLFDIR deleted (pname /POSDW/SAPLCONVERSION_XML)
2 entries from TFDIR deleted (pname /POSDW/SAPLCONVERSION_XML)
dev trc ,00000 Fri Oct 1 10:28:27 2010 -649694573 88072.488603
dev trc ,00000 OCI-call failed with -1=OCI_ERROR 44 88072.488647
dev trc ,00000 SQL error 1089: 'ORA-01089: immediate shutdown in progress - no operations are permitted'
50 88072.488697
http://dbsloci. ,00000 *** ERROR => Error 1089 in stmt_fetch() from oci_execute_stmt(), orpc=0
59 88072.488756
http://dbsloci. ,00000 *** ERROR => ORA-1089 occurred when executing SQL stmt (parse error offset=0)
50 88072.488806
dev trc ,00000 sc_p=0x110f364a8,no=27,idc_p=0x110f4ece0,con=0,act=1,slen=68,smax=256,#vars=1,stmt=0x111799cc0,table=D010INC
57 88072.488863
dev trc ,00000 SELECT MASTER FROM D010INC WHERE INCLUDE = :A0 ORDER BY MASTER;
47 88072.488910
dev trc ,00000 sc_p=0x110f364a8,no=27,idc_p=0x110f4ece0,con=0,act=1,slen=68,smax=256,#vars=1,stmt=0x111799cc0,table=D010INC
113 88072.489023
dev trc ,00000 prep=0,lit=0,nsql=0,lobret=0,#exec=972,dbcnt=0,upsh_p=(nil),ocistmth_p=0x11179a658
50 88072.489073
dev trc ,00000 IN : cols=1,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=80,vmax=32,bound=1,iobuf_p=0x111083a40,v
69 88072.489142
dev trc ,00000 lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
46 88072.489188
dev trc ,00000 OUT: cols=1,rmax=792,xcnt=792,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=80,vmax=32,bound=1,iobuf_p=0x111225e
54 88072.489242
dev trc ,00000 lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
46 88072.489288
dev trc ,00000 SELECT MASTER FROM D010INC WHERE INCLUDE = :A0 ORDER BY MASTER;
46 88072.489334
dbrepo ,06599 ***LOG BY4=>sql error 1089 performing FET on table D010INC dbrepo#4 @ 6599
72 88072.489406
dbrepo ,06599 ***LOG BY0=>ORA-01089: immediate shutdown in progress - no operations are permitted dbrepo#4 @ 6599
50 88072.489456
sap_dext called with msgnr 1:
db call info
function: db_report_interface
fcode: READ_MASTERS
tabname: SOURCE
len (char): 40
key: /POSDW/LCONVERSION_XML$01
retcode: 1
SQL error 1089 accessing : ORA-01089: immediate shutdown in progress - no ope
Main import
End date and time : 20101001102827
Ended with return code: ===> 12 <===
please clarefy me how can i solve this my issue
Regards

Dear Smathi,
Based on the error, Error 1089 in stmt_fetch, can you please check this error message with your database
administrator? Please have a look at note #551.
Regards,
Shimon Zafrir

I AM NEW TO BI ,WHERE I WILL GET DETAIL INFO FOR 'USEREXIT'

HI ALL,
I AM NEW TO BI WHERE I WILL GET ALL DETAILS ABOUT USEREXITS.
AND HOW TO WRITE SIMPLE USEREXIT....I.E SOME EXAMPLE RELATED TO IT..

Check this program for Finding User Exit.
Pass the transaction Code in the section Screen of the Program.This program outouts all exits related to TC given in sel screen
Report
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
                               and object = 'PROG'
                               and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
    select single * from trdir where name = tstc-pgmna.
    if trdir-subc eq 'F'.
      select single * from tfdir where pname = tstc-pgmna.
      select single * from enlfdir where funcname = tfdir-funcname.
      select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
      move : tadir-devclass to v_devclass.
    endif.
endif.
select * from tadir into table jtab where pgmid = 'R3TR'
                        and object = 'SMOD'
                        and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
                                   tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
       20(20) p_tcode,
       45(50) tstct-ttext.
skip.
if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
           2 'Exit Name',
          21 sy-vline ,
          22 'Description',
          95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
      select single * from modsapt where sprsl = sy-langu and
                                         name = jtab-obj_name.
      format color col_normal intensified off.
      write:/1 sy-vline,
             2 jtab-obj_name hotspot on,
            21 sy-vline ,
            22 modsapt-modtext,
            95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first   screen.
Cheers,
Manoj.

Device keeps sending notifications about getting account info for pc

Keep getting the notification :
You need to update your account password for CAM-NET.
How do I fix this?cam net is the name given to my personal computer

Have you yet upgraded to Link v1.2?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My 4s was stolen and I need to get gps info for the last several days to track the phone. Any ideas?

My iPhone 4s was stolen in the Atlanta airport Saturday. I used "Find My iPhone" to locate it, however I need the gps history to show all of it's travels since stolen. Any ideas on how I can get gps history from the phone?

Thanks, just what I was afraid of. I'm getting nowhere. I know where it ended up, but not how it got there. Police are investigating.

Error: getting dev info for Tape - unrecoverable error

Similar Messages

Maybe you are looking for