Error getting extraction in RSA3 0EMPLOYEE_ATTR Datasource

When I try to get an extraction in Transation RSA3 for the Datasource 0EMPLOYEE_ATTR  I am getting
this error message "Feature ANSAL has not been activated yet".
Feature ANSAL has not been activated yet
Message no. P0604
Diagnosis
The feature must be generated before use.
Procedure
Start transaction PE03 and generate the feature
When I go to trans. PE03 ANSAL is already activated.

Hi,
Can you please check these threads relevant to the issue::
http://forums.sdn.sap.com/thread.jspa?threadID=1372563
http://forums.sdn.sap.com/thread.jspa?threadID=1475831
http://forums.sdn.sap.com/thread.jspa?threadID=1443547
Regards,
Arpit

Similar Messages

  • Error in Extraction through RSA3

    Hello,
    I am trying to extract data from my DataSource through RSA3, but Iam getting Error while Extraction data,.
    The display log error says"S:RSSDK:300 [DataDirect][SQLServer JDBC Driver]Object has been closed."
    Regards,
    Mayank
    Points -> Thanks

    The setting are fine. we have already checked that.
    If we delete our Infosource, is the FM created though this also gets deleted from the Function Group.
    Please let me know what else can be done on this error issue.
    Regards,
    Mayank

  • Error while extracting data from Generic datasource

    Hello Gurus,
    I have encountered an error "Errors in source system" with status red while extracting data from generic datasource into DSO.
    I have done below things:-
    1. Checked the jobs in source system, the job is successfully completed
    2. The generic datasource is active and supporting delta with calender day  in source system.
    3. No TRfc error and no idocs stucked.
    4. No short dumps in source system.
    5. The delta queue(RSA7) is showing 0 with status as green.
    6. Replicated the datasource On BW side and also activated the transfer rules by RS_TRANSU_ACTIVATE_ALL
    The problem has not yet solved. Could you guys please suggest me what might be the reason for this error......
    Thanks,
    Sonu

    Hello,
    I have used the generic delta using calender day.
    Safety upper limit : - 1
    Safety lowerr limit : - 0
    I have made the entries in va01 transaction, but the delta queus is not getting updated which should show 1.
    Do Generic extraction require any job to transfer data from Database table to delta queue.
    We are not able to get the delta records on BW side. Please suggest.
    Please suggest.
    Thanks,
    Sonu

  • Error during Extraction in RSA3.

    Hi,
    I have activated the datasource 0JOB_ATTR in R3 site. I can see it in RSA6 but when I try to extract data from RSA3 it is giving an error message like : Errors occurred during the extraction..
    Any help on this highly appreciated..
    Regards
    Uday

    0JOB_ATTR not in use and SAP replaced this with 0EC_CJOB_ATTR... U have to use 0EC_CJOB_ATTR to load master data for 0JOB.
    Even i faced the same problem and found the following info in one of the SDN thread, and we are using 0EC_CJOB_ATTR (make sure u have data in table HRP5050).
    I have sent a message to SAP asking for the solution . Below is the reply what they gave.
    "This error appears because of naming conventions we have to switch the name of the Data Source from 0JOB_ATTR to 0EC_CJOB_ATTR. Please use this data source to extract the compensation job attributes to BW.
    Note also that data source 0EC_CJOB_ATTR extracts data from table HRP5050.
    If no data is being extracted please do the following:
    If you have data in HRP5050 and still do not get any data please try the following :
    1) Take over the Data Source from the business content (RSA5)again and check in RSA3 .
    2) Replicate the Data Source to BW
    3) Activate the Info Source again.
    4) Delete any previous delta initializations for the datasource.
    5) Initialize the delta again
    6) Try to load data".
    Hope it helps.

  • Errors occured during extraction at RSA3

    hi
    i am giving these datasource and get data at rsa3, its  giving error like error occured during extractions?
    can u please let me know what could be the reason?
    0CO_PC_PCP_03
    0CO_PC_PCP_04

    Hi,
    Check the Log in RSA3, youca n find log and see it and correct it.
    Steps:
    1. Inastall DS in RSA5
    2. Check in RSA6.
    3. Extract in RSA3.
    Thanks
    Reddy

  • Error extraction in RSA3

    Hi Gurus,
    i am getting dump in R/3 when i am trying extract in RSA3 Data source is 0ORGUNIT_ATTR
    when i execute this i am getting the below dump
    ITAB_DUPLICATE_KEY
    A row with the same key already exists.
    Error in the ABAP Application Program
    The current ABAP program "SAPLHRMS_BW_PA_OS" had to be terminated because it
      has
    come across a statement that unfortunately cannot be executed.
    Can any body please help me on this issue its urgent
    thanks and Regards,
    Kishore

    Hi Shiva,
    Thanks for you quick reply
    but i am getting the error in R/3 when i tried to see the number of recored in
    RSA3 it gives me the dump
    and also i tried scheduling info package also it failed the data even didnt come to PSA the job is failed in R/3 its self
    is there any way i can correct it in R/3
    thanks and Regards,
    Kishore

  • Extract error for an Infoset Query based Datasource

    Hello All,
    When I test a Info set Query Extraction in RSA3, I am facing the error message:
    The field 'ZBW_EXTRACT' is unknown, but there are following fields with similar name '%COUNT-ZBW_EXTRACT'.
    Syntax Error in Program 'AQZZSYSTBWGENER.....'
    The Program is an Internal system generated program.
    Has anyone faced the issue and know the way out..?
    Definitely, will award points..
    Thanks in advance,
    Ameya.

    Hi Ameya,
    which system are you testing this? I mean are you testing this in dev or qa? If you are testing in QA, make sure you import the infoset correctly. It is a different procedure. Hope it helps.
    Thanks and Regards
    Subray Hegde

  • I'm trying to download Premier pro and I'm getting an error message saying "Error when extracting files"

    I'm trying to download Premier pro and I'm getting an error message saying "Error when extracting files". I use a PC and have made the purchase of that service. What's the problem?

    Hi ampsanru,
    We would need some information regarding the error, could you please post a screenshot moreover your system information i.e. OS, RAM & Graphics card.
    -Ankit

  • Tried to install OS X Yosemite on my MacBook. Got message that it could not be installed on my computer due to error while extracting files from package "Essentials.pkg". When i quit the installer as recommended it goes in a loop and gets stuck.

    Tried to install OS X Yosemite on my MacBook. Got message that it could not be installed on my computer due to error while extracting files from package "Essentials.pkg". When i quit the installer as recommended it goes in a loop and gets stuck.

    Hey corrafromlondon,
    Thanks for the question. After reviewing your post, it sounds like the installer file isn't working. Have you tried deleting the installer and redownloading the installer? I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    How to install OS X Yosemite on your Mac - Apple Support
    you can find the Yosemite installer app in your Applications folder or Launchpad. 
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • After I optimize my pdf I get this error  "Cannot extract the embedded font 'FONT NAME' Some characters may not display or print correctly.

    After I optimize my pdf I get this error  "Cannot extract the embedded font 'FONT NAME' Some characters may not display or print correctly.

    This Acrobat forum may be a better place to ask: https://forums.adobe.com/community/acrobat/creating__editing_%26_exporting_pdfs

  • Error in Extraction with Generic Datasource via Function Module

    Dear Gurus,
    Iam working for BI-HR module.We are extracting data with generic data source via function module. The client some more extra fields in already existing DS. So we made a copy of that Function module and tried to create new generic DS, we got error while extraction like "Error occured during the extraction process". Can you please help in resolving this issue, your valuable suggestion would be highly appreciated.
    Thanks and regards
    Arun S

    Hi,
    Which structure are you using??
    Are you using the same old structure for this function module as well.
    Have you enhanced the structure with new required fields.
    New extrac fields needs to be added to existing structure if you are using the same or create a new one and make sure that you have all the fields in the structure which you are going to use in the data source.
    You need to take care for the append as well and the issue could be in the code as well.
    Make sure you have written the proper code and just for the new fields done an append
    Thanks
    Ajeet

  • Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7

    Hi Gurs,
    I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
    The error is:
    Update mode "Full Upload" is not supported by the extraction API
    Message no. R3011
    Diagnosis
    The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
    System Response
    The data extraction is terminated.
    Procedure
    Check for relevant OSS Notes, or send a problem message of your own.
    Your help in this regd. would be highly appreciated.
    Thanks,
    David.

    Hi David,
    I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
    Try to switch you DTPs/Infopackages to Delta mode.
    While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
    BR
    m./

  • Error While extracting data from FIAA and FIAP

    Hi Gurus,
    I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
    Ther Error is as follows:
    Request still running
    Diagnosis
    No errors could be found. The current process has probably not finished yet.
    System response
    The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.
    Current status
    No Idocs arrived from the source system.
    Kindly help. Your points are assured.
    Thanks and Regards
    Prasad

    Hello Prasad,
    Have you already checked what happened in the source system ?
    You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
    It could be a clue of what happened in R/3.
    Let us know,
    Regards,
    Mickael

  • Thiis error when I execute RSA3 on ECC. Any hints?

    Hi Experts,
    can you help me figure out how to fix this problem:
    I am on an IDES system used by many for training. I am execute rsa3 and enter any of these datasources:
    0fi_gl_4   or 2lis_11_vascl
    and I get the following ABAP screen; any way to get the data extraction going?
    Thiis error when I execute RSA3 on ECC. u2018----
    screen -
    (2) ABAP DEBUGGER CONTROLS SESSION 2(EXCLUSSIVE)
    method IF_EX_RSU5_SAPI_BADI~DATA_TRANSFORM.
    field-symbols: <wa_ZOXID30163> type ZOXID30163.
      break-point.
      case i_datasource.
        when 'ZMARA_DS'.
          loop at c_T_DATA assigning <wa_ZOXID30163>.
            <wa_ZOXID30163>-zztest = '123'.
          endloop.
      endcase.
    endmethod.
    u2018----
    Thanks

    Hi,
    Looking at the code it seems like there is no error but someone has put explicit Break point in the code, now you have two options,
    1) Once you get the above screen just press F8 and let the extractor proceed. But everytime this will be manual process.
    2) Remove the Break-point statement from the code.
    As you said it is asking for Access Key, then get your developer key generated on service.sap.com or contact to your basis team.
    Regards,
    Durgesh.

  • Authorization Error while extracting data after applying SAP upgrade patch

    Hello All,
    Recently we have updated the SAP BW patch to 24 and ECC patch to 22. I have the access to perform extraction in RSA3 tcode in ECC.
    However, While performing the data load in BW, the process is failing at the Infopackage step with the following error:
    "You do not have authorization to extract from Datasource XXXX, Component FI-IO. Message no. R8073"
    My basis guy has given the necessary acces.. but still the issue persists..
    Please provide solutions ASAP... its very critical issue...
    Regards
    Sneha

    Hi,
         Are you loading the data with your username? it may cause problem sometimes because you may not have the authorization object S_RO_OSOA assigned in your roles.
    Try scheduling the loading job with the background user with which normally the process chains are run.
    i guess this should solve your problem, if not try adding this authorization object to the corresponding role and you can run with your user name itself.
    I am not sure about the auth objt , try and see.
    regards,
    karthik.

Maybe you are looking for