Error getting while creating the custom pof serializer class

the error which i am getting is
2011-07-19 15:16:38.767/4.840 Oracle Coherence GE 3.7.0.0 <Error> (thread=main, member=1): Error while starting se
vice "AspNetSessionCache": (Wrapped) (Wrapped: error creating class "com.tangosol.io.pof.ConfigurablePofContext")
Wrapped: Unable to load class for user type (Config=pof-config.xml, Type-Id=1001, Class-Name=examples.testJavaClas
)) (Wrapped) java.lang.ClassNotFoundException: examples.testJavaClass
at com.tangosol.coherence.component.util.Daemon.start(Daemon.CDB:52)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:7)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
at com.tangosol.coherence.component.util.SafeService.startService(SafeService.CDB:39)
at com.tangosol.coherence.component.util.safeService.SafeCacheService.startService(SafeCacheService.CDB:5)
at com.tangosol.coherence.component.util.SafeService.ensureRunningService(SafeService.CDB:27)
at com.tangosol.coherence.component.util.SafeService.start(SafeService.CDB:14)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureServiceInternal(DefaultConfigurableCacheFactory.
ava:1102)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:934
at com.tangosol.net.DefaultCacheServer.startServices(DefaultCacheServer.java:81)
at com.tangosol.net.DefaultCacheServer.intialStartServices(DefaultCacheServer.java:250)
at com.tangosol.net.DefaultCacheServer.startAndMonitor(DefaultCacheServer.java:55)
at com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:197)
Caused by: (Wrapped: error creating class "com.tangosol.io.pof.ConfigurablePofContext") (Wrapped: Unable to load c
ass for user type (Config=pof-config.xml, Type-Id=1001, Class-Name=examples.testJavaClass)) (Wrapped) java.lang.Cl
ssNotFoundException: examples.testJavaClass
at com.tangosol.io.ConfigurableSerializerFactory.createSerializer(ConfigurableSerializerFactory.java:46)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.instantiateSerializer(Service.CDB:1
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.ensureSerializer(Service.CDB:32)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.ensureSerializer(Service.CDB:4)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onEnter(Grid.CDB:26)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.PartitionedService.onEnter(Par
itionedService.CDB:19)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:14)
at java.lang.Thread.run(Thread.java:619)
Caused by: (Wrapped: Unable to load class for user type (Config=pof-config.xml, Type-Id=1001, Class-Name=examples.
estJavaClass)) (Wrapped) java.lang.ClassNotFoundException: examples.testJavaClass
at com.tangosol.util.Base.ensureRuntimeException(Base.java:288)
at com.tangosol.io.pof.ConfigurablePofContext.report(ConfigurablePofContext.java:1254)
at com.tangosol.io.pof.ConfigurablePofContext.createPofConfig(ConfigurablePofContext.java:956)
at com.tangosol.io.pof.ConfigurablePofContext.initialize(ConfigurablePofContext.java:775)
at com.tangosol.io.pof.ConfigurablePofContext.setContextClassLoader(ConfigurablePofContext.java:319)
at com.tangosol.io.ConfigurableSerializerFactory.createSerializer(ConfigurableSerializerFactory.java:42)
... 7 more
Caused by: (Wrapped) java.lang.ClassNotFoundException: examples.testJavaClass
at com.tangosol.util.Base.ensureRuntimeException(Base.java:288)
at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
at com.tangosol.io.pof.ConfigurablePofContext.loadClass(ConfigurablePofContext.java:1198)
at com.tangosol.io.pof.ConfigurablePofContext.createPofConfig(ConfigurablePofContext.java:952)
... 10 more
Caused by: java.lang.ClassNotFoundException: examples.testJavaClass
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.tangosol.util.ExternalizableHelper.loadClass(ExternalizableHelper.java:3056)
at com.tangosol.io.pof.ConfigurablePofContext.loadClass(ConfigurablePofContext.java:1194)
... 11 more
Exception in thread "main" (Wrapped) (Wrapped: error creating class "com.tangosol.io.pof.ConfigurablePofContext")
Wrapped: Unable to load class for user type (Config=pof-config.xml, Type-Id=1001, Class-Name=examples.testJavaClas
)) (Wrapped) java.lang.ClassNotFoundException: examples.testJavaClass
at com.tangosol.coherence.component.util.Daemon.start(Daemon.CDB:52)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:7)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
at com.tangosol.coherence.component.util.SafeService.startService(SafeService.CDB:39)
at com.tangosol.coherence.component.util.safeService.SafeCacheService.startService(SafeCacheService.CDB:5)
at com.tangosol.coherence.component.util.SafeService.ensureRunningService(SafeService.CDB:27)
at com.tangosol.coherence.component.util.SafeService.start(SafeService.CDB:14)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureServiceInternal(DefaultConfigurableCacheFactory.
ava:1102)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:934
at com.tangosol.net.DefaultCacheServer.startServices(DefaultCacheServer.java:81)
at com.tangosol.net.DefaultCacheServer.intialStartServices(DefaultCacheServer.java:250)
at com.tangosol.net.DefaultCacheServer.startAndMonitor(DefaultCacheServer.java:55)
at com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:197)
Caused by: (Wrapped: error creating class "com.tangosol.io.pof.ConfigurablePofContext") (Wrapped: Unable to load c
ass for user type (Config=pof-config.xml, Type-Id=1001, Class-Name=examples.testJavaClass)) (Wrapped) java.lang.Cl
ssNotFoundException: examples.testJavaClass
at com.tangosol.io.ConfigurableSerializerFactory.createSerializer(ConfigurableSerializerFactory.java:46)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.instantiateSerializer(Service.CDB:1
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.ensureSerializer(Service.CDB:32)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.ensureSerializer(Service.CDB:4)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onEnter(Grid.CDB:26)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.PartitionedService.onEnter(Par
itionedService.CDB:19)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:14)
at java.lang.Thread.run(Thread.java:619)
Caused by: (Wrapped: Unable to load class for user type (Config=pof-config.xml, Type-Id=1001, Class-Name=examples.
estJavaClass)) (Wrapped) java.lang.ClassNotFoundException: examples.testJavaClass
at com.tangosol.util.Base.ensureRuntimeException(Base.java:288)
at com.tangosol.io.pof.ConfigurablePofContext.report(ConfigurablePofContext.java:1254)
at com.tangosol.io.pof.ConfigurablePofContext.createPofConfig(ConfigurablePofContext.java:956)
at com.tangosol.io.pof.ConfigurablePofContext.initialize(ConfigurablePofContext.java:775)
at com.tangosol.io.pof.ConfigurablePofContext.setContextClassLoader(ConfigurablePofContext.java:319)
at com.tangosol.io.ConfigurableSerializerFactory.createSerializer(ConfigurableSerializerFactory.java:42)
... 7 more
Caused by: (Wrapped) java.lang.ClassNotFoundException: examples.testJavaClass
at com.tangosol.util.Base.ensureRuntimeException(Base.java:288)
at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
at com.tangosol.io.pof.ConfigurablePofContext.loadClass(ConfigurablePofContext.java:1198)
at com.tangosol.io.pof.ConfigurablePofContext.createPofConfig(ConfigurablePofContext.java:952)
... 10 more
Caused by: java.lang.ClassNotFoundException: examples.testJavaClass
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.tangosol.util.ExternalizableHelper.loadClass(ExternalizableHelper.java:3056)
at com.tangosol.io.pof.ConfigurablePofContext.loadClass(ConfigurablePofContext.java:1194)
... 11 more
2011-07-19 15:16:38.825/4.898 Oracle Coherence GE 3.7.0.0 <D4> (thread=ShutdownHook, member=1): ShutdownHook: stop
ing cluster node
2011-07-19 15:16:38.826/4.899 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=1): Service Cluster left th
cluster
Press any key to continue . . .
coherence-pof-config.xml is
<?xml version="1.0"?>
<!DOCTYPE pof-config SYSTEM "pof-config.dtd">
<pof-config>
<user-type-list>
<user-type>
<type-id>1001</type-id>
<class-name>examples.testJavaClass</class-name>
<serializer>
<class-name>com.tangosol.io.pof.PortableObjectSerializer</class-name>
<init-params>
<init-param>
<param-type>string</param-type>
<param-value>1</param-value>
</init-param>
</init-params>
</serializer>
</user-type>
</user-type-list>
</pof-config>
testJavaClass.CLASS file is
package examples;
import com.tangosol.io.pof.PofReader;
import com.tangosol.io.pof.PofWriter;
import com.tangosol.io.pof.PortableObject;
import com.tangosol.util.Base;
import java.io.IOException;
public class testJavaClass implements PortableObject
private String MembershipId;
private String m_sStreet;
private String m_sCity;
public testJavaClass()
public testJavaClass(String sName, String sStreet, String sCity)
setName(sName);
setStreet(sStreet);
setCity(sCity);
public void readExternal(PofReader reader)
throws IOException
setName(reader.readString(0));
setStreet(reader.readString(1));
setCity(reader.readString(2));
public void writeExternal(PofWriter writer)
throws IOException
writer.writeString(0, getName());
writer.writeString(1, getStreet());
writer.writeString(2, getCity());
// accessor methods omitted for brevity
Thanks.

Hi Wijk,
I have created java class with using NetBeans IDE .
and running with .NET client and i kept it in the folder (C:\Program Files\Oracle\Coherence for .NET\examples\ContactCache.Java\src\examples).
Thanks....

Similar Messages

An error occured while creating the new dataset Could not get type informat

Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
My Path variable list the following:
C:\app\Administrator\product\11.1.0\client_1;
C:\app\Administrator\product\11.1.0\client_1\bin;
C:\oraclexe\app\oracle\product\10.2.0\server\bin;
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
C:\Program Files\Borland\BDS\4.0\Bin;
C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
C:\PROGRA~1\Borland\vbroker\jre\Bin;
C:\PROGRA~1\Borland\vbroker\Bin;
C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
C:\WINDOWS\system32;C:\WINDOWS;
C:\WINDOWS\System32\Wbem;
c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
C:\Program Files\java\jdk1.6.0_07\bin.
Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
Also noted that while deploying at client site I started gett'n this error:
"Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
Is it due to change in the production machine? Any help in this regard is greatly appreciated.

Hi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar

HT3275 I get the following message - "Time Machine could not complete the backup." "Unable to complete backup." "An error occurred while creating the backup folder.""

I get the following message - "Time Machine could not complete the backup." "Unable to complete backup. An error occurred while creating the backup folder.""
This MAC is partioned with Windows 7 with only 50 gig devoted to Windows so my son can play Flight Simulator X on the machine.
I have a WD Passport External Hard Drive for the Back Up
I have spoken with WD Tech Support and they have been fantastic but I still keep getting this message. Any thought?
Maxx

Reboot the TC.. it sometimes gets lost on the network.. are you still actually using 10.6.8 as the problem is more prevalent on Lion and ML it seems is no better.
You might find reset of the TC is needed. change the names to short, no spaces pure alphanumeric.
Reset the TM to the new name.. use the A4 in Pondini's great KB.
http://pondini.org/TM/Troubleshooting.html

I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?

I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?

Hello Drake, I suspect one or more of the Drives needs repairing, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there.

Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn't complete the backup to "G-RAID". to complete backup. An error occurred while creating the backup folder.

Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn’t complete the backup to “G-RAID”. to complete backup. An error occurred while creating the backup folder."
Any idea what I should do?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

I am getting this error message on my iMac. Time Machine unable to complete backup. An error occurred while creating the back up folder. Any ideas on how to fix???

i am getting this error message on my iMac. Time Machine unable to complete backup. An error occurred while creating the back up folder. Any ideas on how to fix???

See Pondini's TM FAQs

HT3275 The error message I get with Time Machine is 'Unable to complete backup. An error occurred while creating the backup folder.' Any idea how I solve this problem?

I am a little perplexed. The Time Machine does seem to be backing up my data but I continually get the following message displayed on my screen 'Unable to complete backup. An error occurred while creating the backup folder.' I am using a WD My Passport for Mac portable hard disk drive.

Hi Peter,
http://pondini.org/TM/C10.html

"An unexpected error occurred while creating a custom installer."

All;
I—and I've seen several others in older posts—have been reported received the error "An unexpected error occurred while creating a custom installer" while attampting to build a customer ARD client installer. My guess is that this is do to a issue related to 10.8.X (10.8.4, in my case) based console Mac but I cannot confirm this. I have verified that there are no outstanding OS, client or application updates or hot fixes, as well.
Has anyone built an successful installer from Mountain Lion-installed Mac? Is there any know workarounds?
Thanks in advance, for any help.

Have the exact same problem.
iMac running 10.8.4
Got through the steps of creating a custom client installer.
if I choose not to customize and just save an installer I don't get the error but it creates a file of Zero bytes in size.
If I chose to configure, when I try to save I get:
An unexpected error occurred while creating a custom installer. Please try again....
Console log reports:
9/1/13 12:32:29.603 AM Remote Desktop[1306]: open on /private/tmp/RemoteDesktopClientInstaller_HEATyAJ5CR/extracted/RemoteDesktopCli ent.pkg/Scripts/RemoteDesktopClient.pkg: No such file or directory
I have tried to save this in several location, with no effect on the error or the information logged, with the exception of the name of the temp directory that DOES contains the file (zero bytes):
RemoteDesktopClient.pkg
Need help with this someone...!
APPLE...I JUST purchase this Applciation for $80.....it just flat out does not work....

Time capsule won't back up - Unable to complete backup. An error occurred while creating the backup folder. Any ideas?

I have tried all the resets, the firmware is the latest version, the green light is on.
But I get this message "Unable to complete backup. An error occurred while creating the backup folder."
Any ideas?

Do setup again.. but make sure both your wireless and your ethernet have ipv6 turned on to local link.
Done this OK, but no idea about IPv6 - something new to me and rather Appley I think?
Unplug the WAN for the moment.. Just LAN port TC to the MBPr ethernet via thunderbolt.. (thunderbird was the kids puppet series.. Thunderbirds are go!!). Done - New real people Thunderbirds movie coming out soon I believe!!!
Reset the TC again.. sorry.. !! You're welcome ... done.
Make sure the ethernet now has an IP address.. 10.0.1.2 - Yep - done that - on ethernet anyway ...
You need to open the network preferences to find out. Yep - that's good ...
****** I then reconnect the TC WAN to the router - is this right?
And then I think I start going round in circles ... boot, reboot, restart, reboot again ...
The final result is green light on TC, but error message when trying TM is "Backup disk is not available".
Then open the airport utility and you should be able to setup the TC.
Do as little setup as possible and then run the TM backup and see how it goes.
I have managed to get Thunderbird to LAN on TC to create a folder on TC and copy a file onto it.
So I guess the drive is working - it must be the software, settings or perhaps even the operator that isn't quite so clever ...
I named network RFG, named device RFGTC. RFG network shown as IP 192.168.0.72
Wireless router is BT Homehub 3 with IP of 192.168.0.254 - is this issuing new IP addresses when rebooting TC?
I have three wireless networks here - the BT Homehub3 wireless, the TC wireless, and also a D-link power socket ethernet thingy for an ethernet connection to the telly - DHP-W310AV which is also wireless link. All are effectively connected to the BT Homehub - is there a conflict there?
Have several times achieved in Airport Utility schematic with internet shown as green, RFGTC shown as green, light on TC green, but no TM backup run ... "backup disc not available."
And there are no tall building around here to hurl myself off ... at least you can go to Sydney Harbour bridge - not too far away ... it was my son in Sydney that persuaded me to scrap Windows and go Apple ... it's all his fault ...

An error occured while creating the original attribute for message no26 296

Hi All,
I am new to DMS , we are trying to store PM documents on content server , created a storage category and while assigning files to storage category then on saving the document i get the below error :
An error occured while creating the original attribute for
Message no. 26 296
Diagnosis
An error occured while creating an original in the Knowledge Provider.
System Response
The original could not be created.
Procedure
Contact the systems administrator and check the log file (transaction Evaluate application log, object SDOK).
Please let me know what configs i am missing ...
Thanks in advance
regrds
pushpa

Hi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar

" An error occurred while creating the backup directory"

Hi all,
I recently bought an external drive because my mac was just about full.
It's made by Lacie, model # P'9231... (1TB)
I got it working, for moving and accessing files (I moved the iPhoto library-and that works fine)... but...
I told Time Machine to use it as the backup disk, but TM often tells be that the backup failed. I get this message;
"Backup failed. An error occurred while creating the backup directory"
I don't understand this. I did some experiments with Time Machine, and I've been able to restore some things, but I still keep getting this message.
I don't know what is getting backed up and what is not..
Did I do something wrong? Or, more importantly, what is the fix?
Any advice is much appreciated. Thanks in advance,
Jim

I'm having the same problem. I just got the drive Saturday at the local Apple store.
Have you figured it out?

TM Error - An error occurred while creating the backup directory.

mmm
Got the TC last Wednesday. Connected 1 brand new iMac and a one year old mini, both on 10.5.2 with Airport Utility updates.
The mini just started getting errors (Sunday lunch)
TM Error
Unable to complete computer backup. An error occurred while creating the backup directory.
Forcing a Backup Now gets the same error.
Mini is connected wirelessly direct to the TC and can browse the TC and read/write files ok.
I can see no reason how why this error is occurring.
TM opens and you can browse the backups fine.
Anyone know how to get TM to be able to create directories again?
Thanks

exactly what I am seeing as well. I had one complete backup before I started seeing the exact error you are getting. I have tried everything I can think of from watching here and spending as much time on hold as I can afford. Hold times to talk with someone who actually might be able to help,that means not the first tech you will speak with but who they transfer you to may understand the TC/TM errors and fixes that work. That means 1 hour plus on hold,almost an hour before the first tech will finally give up and transfer you deeper and 30 minutes to 45 on hold there. Add another hour for them to get caught up with your case. These times are kinda like TC/TM themselves,very slow. I am connected via ethernet and shut down everything when trying to get this to work thus I have lost over 100 hours work time because of trying to get this to work without any interruption. It is such a generic error message it so totally reminds me of windoze daze. All I can do at this point is follow the leader on on the Apple death and dying forums. I am toast on trying and have seen that exact error screen more times than I am willing to admit. I am gonna get something that works as soon as I recover from spending 299 on a new wireless router! Please any of you seeing this error and somehow overcome it please post back and gives us losers something to chew on?

"An error occurred while creating the system proxy" after upgrade to 11.2

Hi, I have just moved from 11.1 release to 11.2 release but this fault is preventing me from using 11.2
If i try to access System Administration Panels like "Users" or "SMF Services" I get two error messages and can not proceed.
If I roll back to the previous BE, (11.1) it all works fine).
An error occurred while creating the system proxy
Navigation Failed. The first component of the address, "vp" is not a valid control.
The error is mentioned here https://www.mail-archive.com/[email protected]/msg09791.html but I can not see the link content and it was a long time ago.
Not sure if it is relevant, but i am behing a pfsense/squid proxy - but have this server IP excluded/set to bypass the proxy.
Also, not sure if it is relevant but here is the output from the following:
nas@nas:~$ svcprop svc:/application/pkg/system-repository:default | grep _proxy
config/http_proxy astring ""
config/https_proxy astring ""
Any help appreciated.

Ensure that the "solaris-desktop" package group is correctly installed :
# pkg info solaris-desktop
# for i in `pkg contents -m solaris-desktop | grep depend | awk '{print $2}' | awk -F= '{print $2}'`; do pkg list $i; done
Ensure that svc:/system/rad:local is online :
# svcs svc:/system/rad:local
Check for any errors in rad service :
# svcs -Lv svc:/system/rad:local
Once the above is checked, does the error persists after a reboot ?

Time Machine Error: An error occurred while creating the backup directory

Time Machine Error: Unable to complete backup. An error occured while creating the backup directory.
I back up to wirelessly to a Time Capsule. I get these errors often. I'll go for a few days with everything working and then encounter these errors. I've even completely erased the Time Capsule drive and started over. It'll work fine for a few days and then start the errors over again. Interestingly, when the errors occur, the Time Capsule drive can not be unmounted even if clicking the eject button. I am on 10.5.8 but it happened in 10.5.7 as well. I have another Mac that doesn't seem to have any issues with the same Time Capsule.
Here's a log - they all seem to fail with similar errors:
Starting standard backup
Backup destination alias resolved to path: /Volumes/AirPort Disk
Disk image /Volumes/AirPort Disk/Brittney’s Computer_0019e33d4fde.sparsebundle mounted at: /Volumes/Backup of Brittney’s Computer
Backing up to: /Volumes/Backup of Brittney’s Computer/Backups.backupdb
2009-08-27 13:52:48.465 FindSystemFiles[2955:713] Querying receipt database for system packages
2009-08-27 13:52:48.693 FindSystemFiles[2955:713] Using system path cache.
Failed to create progress log file at path:/Volumes/Backup of Brittney’s Computer/Backups.backupdb/Brittney’s Computer/2009-08-26-212437.inProgress/.Backup.273091970.250248.log.
Error: (-50) Creating directory 7CCE60DD-ADCC-4004-A0D9-3EC83D892372
Failed to make snapshot.
Backup failed with error: 2
Failed to eject volume /Volumes/Backup of Brittney’s Computer (FSVolumeRefNum: -114; status: -47; dissenting pid: 0)

Nancy H wrote:
I used it as it came, supposedly formatted for a mac.
It may or may not be right.
I'd be inclined to start over, per #5 in the Frequently Asked Questions *User Tip* at the top of this forum.
If that doesn't help, go on to #C10, etc., in the Troubleshooting Tip, as in the previous post.

Backup Fail with Volume Shadow Copy Service error: Error calling a routine on the Shadow Copy Provider, Event ID 12293, error returned while creating the volume shadow copy 0x8004230f,

We are using TINA backup solution and windows 2003 backup is failling with VSS error.
For testing purpose we initiate a system state backup (or any file backup) with the help of windows 2003 ntbackup.exe and found it is failing with below error.
Backup error report.
Backup Status
Operation: Backup
Active backup destination: File
Media name: "Backup.bkf created 28/05/2014 at 06:34"
Volume shadow copy creation: Attempt 1.
Error returned while creating the volume shadow copy:0x8004230f.
Error returned while creating the volume shadow copy:8004230f
Aborting Backup.
The operation did not successfully complete.
We check event viewer and found below error event.
Event Type:
Error
Event Source:
VSS
Event Category:
None
Event ID:
12293
Date:
28/05/2014
Time:
05:48:10
User:
N/A
Computer:
CQ329TOS
Description:
Volume Shadow Copy Service error: Error calling a routine on the Shadow Copy Provider {b5946137-7b9f-4925-af80-51abd60b20d5}. Routine details Cannot ask provider {b5946137-7b9f-4925-af80-51abd60b20d5} if
volume is supported. [0x8000ffff] [hr = 0x8000ffff].

Resolution:
After getting this error we check Shadow Copy provider and writer health and fond it is fine.
To get shadow copy providers details use below command.
Command: vssadmin list providers
Command output
C:\>vssadmin list providers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001 Microsoft Corp.
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
   Provider type: System
   Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
   Version: 1.0.0.7
To get shadow copy writers health
Command: vssadmin list writers
Command Output.
C:\>vssadmin list writers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001 Microsoft Corp.
Writer name: 'System Writer'
   Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
   Writer Instance Id: {333e02cd-d9ec-43c8-9b45-39691ad1b351}
   State: [1] Stable
   Last error: No error
Writer name: 'Registry Writer'
   Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
   Writer Instance Id: {800877a5-e13d-47a3-8f99-ebd4d3b3fd12}
   State: [1] Stable
   Last error: No error
Writer name: 'MSDEWriter'
   Writer Id: {f8544ac1-0611-4fa5-b04b-f7ee00b03277}
   Writer Instance Id: {63400aa0-a17f-4121-9483-1cd226f03238}
   State: [1] Stable
   Last error: No error
Writer name: 'COM+ REGDB Writer'
   Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
   Writer Instance Id: {e13cb72b-84fa-4c86-86d8-48f523aafc9a}
   State: [1] Stable
   Last error: No error
Writer name: 'Event Log Writer'
   Writer Id: {eee8c692-67ed-4250-8d86-390603070d00}
   Writer Instance Id: {ce63b3a0-e038-4e56-9d07-929f256639de}
   State: [1] Stable
   Last error: No error
Writer name: 'WMI Writer'
   Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
   Writer Instance Id: {008e8714-ed6d-4288-81ce-4b0b1ec41294}
   State: [1] Stable
   Last error: No error
Writer name: 'BITS Writer'
   Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
   Writer Instance Id: {e22a8953-a52c-4a76-bec0-8773122cbff8}
   State: [1] Stable
   Last error: No error
Next I check Shadow Copies details from volume properties (right click on C or other drive then select properties then click on Shadow Copies Tab) and found it is showing the same error code..
From this error it is clear that the issue is inside the registry hive and due to junk hive shadow copies services not able to working properly.
For me the server have two disk we check disk signature at MBR and found the disk signature was.
Signature disk 0 : 9351912b
Signature disk 0 : FDFBE035
But at registry we found lot of nonexistance signature. Which indicate lot of junk valu inside registry.
Now how can we resolve this issue?
It is very simple just delete the registry key “volume” (registry key “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\STORAGE\Volume”) and reboot the server it will “Volume” registry hive automatically.
Note:
When you remove registry key it is showing error unable to delete, then please right click on it select permission then take ownership and assign full permission to your login account.
Please be careful when you delete registry key because system can fully crashed if you delete or modify wrong registry key.
Your can take a backup of the registry key by exporting.

Error getting while creating the custom pof serializer class

Similar Messages

Maybe you are looking for