Error - "Group cannot be found" after rename user group

Hi,
I got the error message below after I clicked at 'edit' button in the "People and Groups" page (/_layouts/15/groups.aspx). Before I get this error message, I renamed the group name. It seems like it was looking for the old name when I clicked at
'edit' button. However, I can still access the Group Setting page by go to the group page -> settings -> Group Settings. Once I renamed the group name back to what it was. I can click at the 'edit' button without any error.
Can someone please explain to me about this issue? 
Thank you,

Hi,
This is what I have in the log
Correlation ID: 383abd9c-5f4c-707e-c171-bb7bd63f8d2e Date and Time: 9/29/2014 2:50:53 PM
09/29/2014 14:50:53.08 OWSTIMER.EXE (0x3C3C)                  
0x16F4
SharePoint Foundation         Monitoring                    
nasq Medium  
Entering monitored scope (Timer Job MySite-Instantiation-Interactive-Request-Queue). Parent No
a415c502-5c7f-494d-b58e-f8deec07d9b8
09/29/2014 14:50:53.08 OWSTIMER.EXE (0x3C3C)                  
0x16F4
SharePoint Foundation         Logging Correlation Data      
xmnv Medium  
Name=Timer Job MySite-Instantiation-Interactive-Request-Queue
383abd9c-8f41-707e-7d8c-e722a2386e1c
09/29/2014 14:50:53.08 OWSTIMER.EXE (0x3C3C)                  
0x16F4
SharePoint Portal Server      
Personal Site Instantiation   aj58q
Medium   <LogTimerJobInstance> Starting timer My Site Instantiation Interactive Request Queue (e94a6caa-b0f5-4897-b489-585ca50c7803) for web application: SharePoint2013Intranet - 80. Function: MySiteInstantiationJob:Execute
383abd9c-8f41-707e-7d8c-e722a2386e1c
09/29/2014 14:50:53.08 OWSTIMER.EXE (0x3C3C)                  
0x16F4
SharePoint Portal Server      
Personal Site Instantiation   aj58r
Medium   <LogTimerJobInstance> Finishing on timer My Site Instantiation Interactive Request Queue (e94a6caa-b0f5-4897-b489-585ca50c7803) for web application: SharePoint2013Intranet - 80.  Function:
MySiteInstantiationJob:Execute 383abd9c-8f41-707e-7d8c-e722a2386e1c
09/29/2014 14:50:53.08 OWSTIMER.EXE (0x3C3C)                  
0x16F4
SharePoint Foundation         Monitoring                    
b4ly Medium  
Leaving Monitored Scope (Timer Job MySite-Instantiation-Interactive-Request-Queue). Execution Time=3.75969571551692
383abd9c-8f41-707e-7d8c-e722a2386e1c                  
b4ly Medium  
Leaving Monitored Scope (Timer Job MySite-Instantiation-Interactive-Request-Queue). Execution Time=3.75969571551692
383abd9c-8f41-707e-7d8c-e722a2386e1c

Similar Messages

  • 4.0.8.2.4  Cannot start listener after changing user/group to nobody/nobody

    Installed OAS 4.0.8.2.4 and configured it. Everything is working fine with listener, plsql cartridge, Java cartridge and OSSWA. But if change listener's user/group from Oracle/Dba to nobody/nobody. Listener will not start. It hangs in as follows:
    ========================================================================
    Information: Listening on NORM port 80 address 0.0.0.0
    Information: wriorProcessInit: RMProxy IOR Bootstrap Service initialized
    Information: Adapter services initialized successfully
    Information: The server started successfully
    Server now running as process 15654
    OWS-08850: Oracle Web Listener 'www' started.
    Oracle Web Listener 4.0.8.2.4 Enterprise Edition - Release (Domestic)
    Copyright (c) Oracle Corporation 2000. All rights reserved.
    Information: Listening on NORM port 5502 address 0.0.0.0
    Information: wriorProcessInit: RMProxy IOR Bootstrap Service initialized
    ===========================================================================
    from the message above, we can see if it failed to start the "Adapter services"
    If we change the user/group back to Oracle/Dba, it starts fine.
    And also, we have under $ORACLE_BASE/admin, the listener ( name devl ) permission has been changed accordingly to the user/group change. We follow the instruction from OAS configuration to change user/group.
    ( Read access to the configuration file
    Read access to all files that provide content for servicing requests
    Read access to all imagemap files
    Execute access to all Oracle Application Server binaries and program files that the Web Listener must execute
    Write access to the log and error files
    Read access to user directories )
    Thanks.

    Thanks. After a few more days testing. We finally figure out where it went wrong. We changed user/group from node manager. ( from Oracle/dba, installer, to nobody/nobody). After that, we only changed $ORACLE_BASE/admin/ows/SITE_name/httpd-host_name/listener_name to be read and write accessed by nobody. We forgot to change owl.cfg to be read access to nobody/nobody. After we changed that. It starts fine.
    Thanks again.

  • DFSR Error - The Replication Group Cannot Be Found

    In the DFS Management console when I view entries under the Replication node of the tree I am seeing three entries with red X's as icons.  When I click on one of these an error is displayed...'The replication group cannot be queried.  The replication
    group cannot be found'.  I would like to delete these bad entries.  How can this be accomplished?
    Thanks in advance for your help,
    Terry
    twahl

    Hi,
    You may also click on the bad replication groups, select Delete to remove them and click New Replication Group to create new replication groups.
    For more information regarding DFS management, please refer to the following Microsoft TechNet article:  
    DFS Step-by-Step Guide for Windows Server 2008
    http://technet.microsoft.com/en-us/library/cc732863(WS.10).aspx
    Regards,
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • JHeadStart Security problem-error page cannot be found- role based security

    JHeadStart Security problem-error page cannot be found- role based security
    Good morning! How are you? I would need some help in a jheadstart 10.1.3.2 security case and I was wondering if you could give me a hand to go on. I create the Model project with tables of oe schema. Then in JHeadStart to perform security I follow the following steps: In ViewController/WEB-INF/web.xml – properties I do the following: login configuration: http basic authentication rfc 7617: realm:jazn.com
    Security roles : I define two roles: customer and administrator , Security Constraints: web_resources: All_pages, Url Patterns: faces/*. Then in Tools/Embedded OC4J Preferences/Global/Authentication JAZN/Realms/jazn.com/users: I define two users c1, password c1 and a1,password a1, roles/member users/ I attribute the roles to the relevant users c1—customer and a1—administrator. Then in application definition editor on service level I define security/use role based authorization=true , authorization type: JAAS and when access denied go to next group=true. On group level e.g.: ProductInformation: Authorization/Authorized Roles Permissions: administrator.On item level : Orders/Items/OrderTotal/Operations/Update Allowed: #{jhsUserRoles['administrator']},Then I generate the pages (run the jag) . The generation is completed successfully but when I run the View Controller project a “the website declined to show this webpage…(page cannot be found)’ is displayed. What should I do? I would appreciate it if you would help me on this issue! Thank you very much.

    Thand you very much for your reply! Unfortunately there is a specific restriction-convention in the project I work in. I am supposed to perform role based security with my own tables and no by the jheadstart’s ones. Could you find out what is my fault with the steps I follow trying to perform the process?
    To remind you my steps I paste the following again:
    JHeadStart Security problem-error page cannot be found- role based security
    Good morning! How are you? I would need some help in a jheadstart 10.1.3.2 security case and I was wondering if you could give me a hand to go on. I create the Model project with tables of oe schema. Then in JHeadStart to perform security I follow the following steps: In ViewController/WEB-INF/web.xml – properties I do the following: login configuration: http basic authentication rfc 7617: realm:jazn.com
    Security roles : I define two roles: customer and administrator , Security Constraints: web_resources: All_pages, Url Patterns: faces/*. Then in Tools/Embedded OC4J Preferences/Global/Authentication JAZN/Realms/jazn.com/users: I define two users c1, password c1 and a1,password a1, roles/member users/ I attribute the roles to the relevant users c1—customer and a1—administrator. Then in application definition editor on service level I define security/use role based authorization=true , authorization type: JAAS and when access denied go to next group=true. On group level e.g.: ProductInformation: Authorization/Authorized Roles Permissions: administrator.On item level : Orders/Items/OrderTotal/Operations/Update Allowed: #{jhsUserRoles['administrator']},Then I generate the pages (run the jag) . The generation is completed successfully but when I run the View Controller project a “the website declined to show this webpage…(page cannot be found)’ is displayed. What should I do? I would appreciate it if you would help me on this issue! Thank you very much.

  • While viewing a page I suden get "Oops! This page appears broken. DNS Error - Server cannot be found." However I can back arrow to the page

    I just upgrade to versions 18.0.1. I am suing Window 7 64 bit.
    Now I while I am viewing a page I suddenly receive the error massage "Oops! This page appears broken. DNS Error - Server cannot be found."
    I can use the back arrow key to bring the paper back.
    If I have several tabs open, I can watch one tab after another change from the page name, It doesn't seem to matter who page it is, Yahoo, Washington Post, NBCNews,

    I am not a techie. I keep 15-20 to tabs open at a time for reference while working. When I upgraded to this version, all my tabs were closed and my history was erased. I still have not recovered from that loss. I do not want to have this repeated!
    If I was using pdfforge extension (what ever that is) before the upgrade, why is it venomous now?
    Besides this issue, since upgrading I suddenly starting having the audio from commercials being played from tabs that are not active (open). I now have to leave my audio muted.
    I expected assistance from Firefox not some unknown individual ( iamjayakumars) who for all I know is a troll trying to get me to do something to expose my computer to attack.
    I allowed Firefox to collect data they needed from my computer when I submitted the question.
    Fix the bug in your program! I have used Firefox since it came out. I am within a hairs width of switching browser. The only thing holding me with Firefox is my bookmarks. If I figure out how to export them, I am gone.
    FIX YOUR BROWSER!!!

  • "Group cannot be found" exception

    I have the following code:
    m_Web.SiteGroups.Add(groupName, groupOwner, m_Web.CurrentUser, String.Format(Common.SPGroupDescription, m_Web.Name));
    SPGroup newGroup = m_Web.SiteGroups[groupName];
    The above code fails when i try to assign the group i just created to the newGroup variable.
    In my Dev platform which is a 32- bit Windows Server 2008 running WSS 3.0 that code runs perfectly.
    But in my production platform which is a 64-bit Windows Server 2008 i throws an exception saying "Group cannot be found".
    In my dev environment all my unit tests pass, so i don't know what i am doing wrong. Does anyone know how to handle this problem?
    Thanks in advance.
    DM

    Hello
    What was happening is the following as of lot of errors in sharepoint they are not very descriptive “Group
    cannot be found” mean that group had no permission within site, to be accessible the group should have at least read permission within the site.
     So if you create new group or your using group with no access, you will have the error
    Resolution :
    Give permission to your group on the site
    J
    Cheers
    Momo

  • Send To iView giving Error AttachmentList cannot be found/created

    Hi Everybody
    Currently I am on SAP EP 7.0 SP17.
    I am facing the following problem
    I created a Send To iView so that users can send Mails from Portal.
    It is working fine if I use Http Protocol
    If I use Https protocol in the URL it is throwing the Error AttachmentList cannot be found/created.
    For some landscape Info
    I have a Exchange Frontend server and Exchange Backend Server.
    please help me out as this is the Production issue Now
    Thank you
    Regards
    Krishna kanth

    Hi
    Its been a very Long time.
    The Issue is resolved. I had to restart my production server.
    Also please check your Connection to User Database ( Just verify it)
    Thank you
    Regards
    Krishna

  • We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is: Cannot send mail. The user name or password for iCloud is incorrect.

    We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.

    About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone.  Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc.  This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...

  • Error 1087 extra characters found after end of program.

    Why am I getting the "error 1087 extra characters found after end of program with this code".
    If (counter == 1) {
    Next_btn.addEventListener(MouseEvent.CLICK,KMT1);
    else {
    Next_btn.addEventListener(MouseEvent.CLICK,KMT1);
    function KMT1(event:MouseEvent):void {
      gotoAndPlay("KMT1");

    thanks...the small stuff gets me every time.

  • POST MIGRATION - Project Site cannot be found after migration from 2007 to 2010

    Hi,
       I have done full  migration from Project Server 2007 to Project server 2010. All the databases have been restored. The details in the Project Center are coming correctly. But When I open the Project Site , I get error webpage cannot be
    found. 
    I have done the Bulk update but it is not updating the URL to 2010 URL. 
    Please help.
    Regards

    Use PowerShell to list all the sites in your PWA site collection.
    There are many examples online..  Here is a link that is useful
    http://blogs.msdn.com/b/vijay/archive/2009/10/01/how-to-list-all-the-sub-sites-and-the-site-collections-within-a-sharepoint-web-application-using-windows-powershell.aspx
    Cheers
    Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
    Website http://www.WhartonComputer.com
    Blog http://MyProjectExpert.com contains my field notes and SQL queries

  • Is it possible to map a Sponsor Group in Cisco ISE to a user group in Active Directory, through a RADIUS server?

    Hi!!
    We are working on a mapping between a Sponsor Group in Cisco ISE and a user group in Active Directory....but the client wants the mapping to be through a RADIUS SERVER, for avoiding ISE querying directly the Active Directory.
    I know it is possible to use a RADIUS SERVER as an external identity source for ISE.....but, is it possible to use this RADIUS SERVER for this sponsor group handling?
    Thanks and regards!!

    Yes It is possible to map Sponser group to user group in AD and if you want to know how to do please open the below link and go to Mapping Active Directory Groups to Sponsor Groups heading.
    http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_guest_pol.html#wp1096365

  • TM backup disk cannot be found after Snow Leopard install

    Message from elsewhere re-posted here after helpful advice from Apple Discussions Team.
    Just installed Snow Leopard (with TM switched off though not unplugged) and got all the software updates available. I re-installed the TM installation disk. Everything went ok until I wanted to restore from my Time Capsule. I switched the big switch on. TM is continuing to make backups but when I want to locate folders to restore TM won't go back further than the day I installed Snow Leopard. Having selected the TM disk and entered the password the dialogue tells me that the TM backup disk cannot be found and offers me the select disk dialogue again. I have gone through the unplug/plug routine.
    Through Migration Assistant I tried the contents of my Pictures folder (including all my iPhoto libraries) but it just supplied an empty folder. Since I didn't migrate at the time of the Snow install I wonder whether it was migrating the earliest backup it had made after the Snow install. This would make sense if "the Time Machine backup disk cannot be found", as the dialogue keeps telling me.
    Anyone any ideas?

    I'm not sure just what you did.
    Did you reinstall Snow Leopard? Did you do a full restore?
    First, just re-select your Time Capsule in TM Preferences.
    If that doesn't help, try a "Full Reset" of TM per #A4 of the Time Machine - Troubleshooting *User Tip* at the top of this forum.
    If that doesn't help, see #E2 there.
    If still no help, use the Finder to see if you have two sparse bundles on your Time Capsule. If so, try mounting one manually by double-clicking it, then using the Browse option per #E2.

  • SSIS is not running in 64 bit production server - Error Class cannot be found while running from c# web application

    Full error message:
    An Integration Services class cannot be found. Make sure that Integration Services is correctly installed on the computer that is running the application. Also, make sure that the 64-bit version of Integration Services is installed if you are running a 64-bit
    application
    I have developed SSIS package in my development machine where the OS is 64 bit and sql server 2012 is installed.
    The package has excel source and oledb destination. Excel files can be both .xls and .xlsx format. Since i want to run both xls and xlsx format i have installed
    32 bit Microsoft Acess database engine form the below link, then both xls and xlsx format worked.
    .xls - 32 bit
    .xlsx - 32 bit and 64 bit is available. So in common i have to run it in 32 bit.
    I have set Run64BitRuntime to False and ran package. it is working fine. I cannot set Run64BitRuntime to True and run the packages. Because i have office products installed on my machine which is 32 bit. if try to install 64 bit Microsoft Acess
    database engine redistributable pacakage from below link , it is throwing error saying that, already office 32 bit product is installed so uninstall 32 bit product and install 64 bit.
    Excel connection string is Ace database engine only. everything works fine.
    microsoftcom/en-us/download/details.aspx?id=13255
    Now i am trying to invoke package from c# code by using Microsoft.SqlServer.ManagedDTS.dll and it is also working fine in my dev machine.
    When i deploy the web application in production am getting the error while invoking package. the full error message is posted in 1st line of this thread.
    Then i tried to execute the package in production server by using dtexec utility, it is working fine. I tried both 32 bit and 64 bit dtexec utility by going to specific path (program files(x86) and Program files) via command prompt.
    It is all working fine. So the error coming when i invoke from web application. My guess is ManagedDTS causing problem.
    Where can i find 64 bit Microsoft.SqlServer.ManagedDTS.dll
    or is it because of any other problem. i have checked below links, still problem not resolved.
    social.msdn.microsoftcom/Forums/sqlserver/en-US/491384d2-02f7-4178-a1c3-bcbd58e57fce/an-integration-services-class-cannot-be-found-make-sure-that-integration-services-is-correctly?forum=sqlintegrationservices
    forums.aspnet/t/1990417.aspx?Issue+deploying+SSIS+Package+in+production+web+server

    1) "I have set Run64BitRuntime to False and ran package" -> this is not valid outside of your development environment, it is made for simulation purposes as all the dev tools are 32 Bit
    2) "Where can i find 64 bit Microsoft.SqlServer.ManagedDTS.dll " is basically SSIS. It is quite possibly the culprit. I am inclined to think you attempt to run the package where there no SSIS installed.
    Arthur
    MyBlog
    Twitter

  • The cryptic error - element cannot be found in a collection ?

    I have encountered this error in the script task a few times. The causes are - Variable is present in code,  but not added to task list OR, you try to create a DataColumn with the wrong column name, OR the variable in the task list has been deleted.
    When you make such mistakes, you get the cryptic error - 
    Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. 
    ---> Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The element cannot be found in a collection. This error happens when you try to retrieve an element from a collection on a container during execution of the package and the element is not there.
     ---> System.Runtime.InteropServices.COMException (0xC0010009): The element cannot be found in a collection. This error happens when you try to retrieve an element from a collection on a container during execution of the package and the element is not
    there.
    How do I guess the EXACT source of the problem from this cryptic error message ?
    I am sure that I am a beginner compared to the developers who made SSIS. But, what amazes me is that they could not even show which element was missing ? As a result, the developer has to look at all the variables in his code and see if they are in the list.
    Is this error so cryptic in even SSIS 2012 ? This should not have been too hard for the highly paid programmers to figure out.

    The thing is the variables are stored as an array or to be precise a collection so the variable name is the key and as you might have noticed in other programming languages that the values are not displayed in the error or the stack trace so according to
    the base engine the variable name is just a string value and nothing more so it will throw the error 
    "The element cannot be found in a collection"
    instead of showing which which variable.
    Surender Singh Bhadauria
    My Blog

  • Getting error for opening shopping cart after deleting user fron org struct

    Hi Experts
    I am getting dump user attribute not maintained after deleting user assignment from org structure.
    what can i do to retain old status. or atleas wants to avoid getting this dump ..while displaying this SC.
    pl provide any solution
    Regards
    Nilesh,

    It is never a good idea to just delete a user assignment. What I find is that people just go on deleting assignments without considering the consequences. And later on it gives a lot of trouble to correct errors.
    So never delete an assignment, but give it an end date (it's there for a reason!).
    On to your problem: as said by someone else, get the user/business partner back into the organisational model (doesn't matter where actually) and there won't be an error. Try first with ppoma_bbp, if that doesn't work use pp01 - use pp01 with care and know exactly what you want to achieve else you'll end up creating a bigger mess than you started with.
    If you have deleted the business partner completely you will have to update the database by hand hacking tables (a big reason never to delete a bp you are not entirely sure about).
    Regards,
    Robin

Maybe you are looking for