Error Handling on LSMW

Hi Experts,
Now I want to use a batch input recording to implement LSMW.We all konw that we can get return message if we use call transaction like below.
CALL TRANSACTION
    CALL TRANSACTION 'VA01'
               USING V_IT_BDCDATA
             OPTIONS FROM L_OPTION
            MESSAGES INTO V_IT_MESSTAB.
So my question is how to get return message if I plan to use LSMW to implement function.It's urgent.
Regards,
Kelvin
Edited by: Kelvin Yu on Mar 21, 2008 9:44 AM

Similar Messages

Error handling in lsmw

Hi,
Is it possible to handle errors in LSMW if so how?
Advantages of LSMW over Function Module.
Is it possible to create multiple structures in LSMW to accept multiple Flat files.
Thanks in Advance.

Hi Shankar,
SAP generated messages can't be handled in LSMW. We can check/Analyze the logs by T.Code: SLG1.
We can create multiple Structures in LSMW with 2nd Step.
Regards,
Sivaram.
P.S. Reward Points for helpful Answers.

Lsmw error handling

Hi, all
wat r the error handling methods in lsmw, Can any body explain.

Hi Tanmay,
During the Mapping and Convertion step where you have assigned your input file fields to the recording fields, you can add some ABAP code to validate the field contents and write out an error message or output to an error file, with field contents if required.
If you are familiar with ABAP this should be no problem for you.
Regards
Kevan

Handling error records in LSMW

Hi All,
How to handle error records in LSMW.
Out 20 records had, I had 4 record and 10 record captured in error log.
How to process them?
Thanks
Sonali

Hi Sonali,
You have to re-run LSMW for those records which were recorded in error log. Make sure that the new flat file is error free.
There is no other alternative to this.
Hope this solves your problem.
Regards,
Brajvir

IDOC error when using LSMW+XIF to load business partner data

Hi experts,
i have configured the LSMW using idoc type 'CRMXIF_PARTNER_SAVE01', but it gives somes errors like below (LSMW_BP456 is the BP no)
E Partner LSMW_BP456 (4A01EE5D47261621E10000000A0A0ACB ): the following err
W Partner data processed with key PartnerGUID 4A01EE5D47261621E10000000A0A0
W Partner data processed with key PartnerID LSMW_BP456
E No update is defined for BP role 000000
E Validation error occurred: Module CRM_BUPA_MAIN_VAL , BDoc type BUPA_MAIN
E Error status 'A ' calling validation service
In fact i have loaded product succesfully using this interface, so i am sure the basic setting is done for XIF interface.
And i found the error messages come when executing below code in fm 'CRMXIF_PARTNER_SAVE' in debug mode. I am not very familiar with BDOC and it seems that the error occured when processing bdoc.
call MW flow service synchronous (error handled by caller)*
IF lv_callmode = 'S' OR lv_callmode IS INITIAL.
CALL METHOD cl_smw_mflow=>validate
Any advice ? thanks

Hi,
I have looked into the issue. If you are trying to create the BP with general role 000000, i think it might not be possible via LSMW.
The error message is correct, because role 000000 is indeed not relevant for update because if you can see in the customising Tx BUSD, 'FLAG - Do not update' will be active. This is the reason why you are getting the error message of 'No update is defined for the role 000000'.
When you insert a partner in role "000000 General Business Partner",the error message "BP role cannot be updated" will be returned. This error message is very specific for this issue. You can create BP in different roles apart from the general role.
Indeed if you try to change the 'Do not update' flag to inactive state and process the LSMW project you will be able to create the BP but it is strictly not recommended.
This role is a technical role which exists for the creation of BP, and immediately you will fall back to other roles available for the partner.
So i feel you need to change the role before you create BP with this role via LSMW.
I hope this helps.
Regards,
Venkat

How to take control back from service error handler in osb

I am using osb to send data to multiple services at the same time.since x query is a procedural language if any single operation fails the flow goes to service error handler which calls a BPEL webservice and logs the error in a database but the control doesnt comes back to my code I have tried everything including RESUME,REPLY operations but all in vain similarly i cannot use service callout call to my business service because its not allowing to select my BPEL wsdl operation

If your statement "the control doesnt comes back to my code" means you expect that your xquery will continue in processing than your expectations are just too high. :-)
Resume action is supposed to resume the next action in the message flow. It means the action that follows the action which caused an error.

Report and Alert don't executed in the error handler with a JMS proxy service

Hi,
I'm working with OSB 11.1.1.4.0 and I'm facing a problem with the error handler of my JMS proxy service.
My error handler contains two main elements :
- a Report action
- an Alert with a JMS destination defined
When the business service failed the message remain in the queue. It's the expected behavior.
The problem is :
- the report is missing
- the alert is raised but missing in the JMS destination defined in the Alert setting.
I've noticed if I add a Reply with Failure or Success, Report and Alert are successfully executed.
Unfortunately the message don't remain in the JMS queue.
What can I do in order to have my report/alert done and the JMS transaction rollback in order to keep the message in the queue ?
I've already met this problem in the past with alsb v3 and my solution was to add Service Callout in the error handler in order to externalize these actions.
This solution is not convenient and I hope another solution is possible.

Inventorying workgroups can be difficult, especially when it comes to remote access and network security. Because workgroups are not centrally managed, some of the items discussed in this
wiki article on preparing your workgroup environment may require you to visit each machine individually.
For non-domain credentials, you do not use the <systemname>\<user> format, you simply enter the user name. Regarding how to enter the credentials, if you have an account that uses the same username and password on all machines and is an administrator
on all of those machines, then you can enter that in the All computers credentials page of the wizard. You can also do this if they are different user names. However, if some machines have an account with the same user name, such as Administrator,
but different passwords on each machine, you will need to use the Manually enter computer names discovery method, and then enter the information for each group or each machine.
As you can tell, workgroup environments can quickly negate any benefit that the agentless inventory nature of MAP provides.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

LV7.1 Strange behavior with Automatic Error Handling occuring when it shouldn't [LV 7.1 Pro on WinXP for Tablet PC's]

[LV 7.1 Pro on WinXP for Tablet PC's]
I recently let a rather large LV app of mine run in the development environment while I was out for a couple of days. Upon returning I found that the app had hung for ~22 hours waiting for an answer to an Automatic Error Handling (AEH) dialog proclaiming an Error 7 in New File without any indication of the VI hierarchy that called New File. I set about ensuring that AEH dialogs would not pop up and have not been able to discover how I could have possibly received one in the first place.
Subsequent investigation revealed:
Neither AEH option in Options>Block Diagrams were checked.
Network problems had occurred around the time that the app had hung. All file paths are network paths when running in the development environment, so the cause of the error was most likely valid, even if the AEH dialog appearance wasn't.
My app has only one instance where the New File primitive is used by me. That subVI and all others above it in the hierarchy DO NOT have the AEH property enabled. The error out cluster of New File in my subvi is wired.
My app has three instances where New File is called from a vi.lib vi (Open/Create/Replace File.vi, Open Config Data.vi, and Prompt Web Browser Path.vi), none of which have the AEH property enabled. Nor does any of their calling VI's. All three instances also have their error out cluster wired.
A utility to examine the AEH property of all VI's (with all top level and dynamic VI's loaded) in memory reported that only 1 of 308 vi's ( RGT Does File Exists.vi from the Report Generation Toolkit) had that property true. That vi has no subVI's other than the File/Directory Info primitive and no calling VI's in common with any of the vi's that call New File, except a top level VI.
As long as 'Enable automatic error handling dialogs' remains unselected in options>block diagram, I am unable to get an AEH dialog for either the New File or File/Directory Info primitives in a test VI with AEH property enabled and their error out clusters unwired no matter what invalid path I pass to the functions. As soon as the options>block diagram>Enable AEH dialogs' is selected, both primitives fire AEH dialogs with no error out wired and don't when wired. i.e. works as advertised.
In other words I can find no reason why I should have gotten the problem AEH dialog...
I cannot afford for this app to hang because of a network problem, other portions of the app that were running concurrently correctly handled the error and, had the AEH dialog not appeared, the app would have made corrections or shutdown in an orderly fashion.
Any ideas?

Very good.
Write Characters to File.vi>Open/Create/Replace File.vi>New File
New File throws the error. Open/Create/Replace strips the hierarchy from the source of the error. Write Characters passes it to the General Error Handler. I never looked above O/C/R file in the hierarchy except for enable automatic error handling property. The tip-off should have been to realize that O/C/R file was stripping the hierarchy from the error and look above that.
The real irony is that Write Characters was being used to log error cluster data to an error log file...
Save as... Copy without updating... the OEM 'Write Characters to File' is gone from this app.
Thanx (a bunch)

Error while doing LSMW

Hi, Freinds
I m getting error while doing LSMW.
In the step <b>Convert Data</b> it gives the following error <i>'Syntax error in program /icadmc/sap_lsmw_conv_0000027
line 27
for type 'C' a maximum length specification of 65535 is allowed'</i>
Please Help
Its Urgent
Regards

Hello,
Try to convert the same file in the development server. May be some records get wired in your file.
Regards,
Naimesh

Error handling in process chain-doubts

Hi ,
I have some doubts in error handling of process chains.
1) I have aprocess load infopackeage and subsequent process is update fromPSA.
process load infopackage got failed , so i loaded the IP manually and repeated the next i.e process update from PSA .
How to correct the process chain from now?
2) I have aprocess load infopackeage and subsequent process is Delete request in infocube .process load infopackage got failed , so i loaded the IP manually and repeated the next process i.e Delete request in infocube. Chain continued by deleting the right request . How this is possible ?
Plz help me as this is urgent and daily i have to deal with this issues. If any documents on error handling is greatly appreciated.
My mail id is [email protected]
Regards,
Pavan

Hi Pavan,
Hope the following links will give u a clear idea about process chains and clear ur doubts.
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Errors in monitoring of process chains can be categorized into 4 different sections...
Master data - Full Update
Master data - Delta Update
Transaction data - Full Update
Transaction data - Delta Update.. in terms of loading of data which can be due to server shut down or system maintenance... errors due to incorrect entries in the OLTP system in which case you'll have to fix the errors in the PSA and manually load the data...
Otherwise it can have errors on Attribute change run being locked by some other job... Aggregate Roll up failing because of attribute change run being run at the same time... Problem with hierarchies and save hierarchies...
There can be problems with the data store activation if the ODS object contains any incorrect request sitting inside it... then, you need to delete the incorrect request and reload the data again...
In case of Transaction Delta failure, you'll have to request for a repeat either manually in the infopackage or using the repeat option if available on right clicking the load event...
For Master Data Delta failures, you need to do an Re-init by deleteing the previous initalization condition in the "initalization option for source systems" in the menu scheduler or reschedule the enitre chain... because, master data generally do not support repeat of last delta ...
U can even look into these links:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
For common data load errors check this link:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
****Assign Points if Helpful****
Regards,
Ravikanth.

Error handling function: ORA-20001: get_dbms_sql_cursor error:ORA-00942: table or view does not exist is not trapped. Why?

Why APEX 4.1 Error handling function does not trap the error of missing table?
Say, I create simple application with single IR report page and I also assign standard simple error handling function.
Function works perfectly, except but this case:
If I just drop a table used by report page and then refresh the page I am getting usual APEX error message:
ORA-20001: get_dbms_sql_cursor error ORA-00942: table or view does not exist
and error handling function is not invoked at all.
Is this a feature or a bug?

Hi,
Check the corrections given in the note 990764:
Reason and Prerequisites
Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
ORA-00942: table or view does not exist
Fehler in CL_SQL_RESULT_SET Include NEXT_PACKAGE
RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
Solution
SAP NetWeaver 2004s BI
Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
In urgent cases you can implement the correction instructions.
The correction instructions contain the tightened inspection for characteristics.
Regards,
Anil Kumar Sharma .P

Issue with SRDemo error handling

Hi All,
Glad the forums are back up and running. In debugging some error-handling issues in our own application, I found an issue in the error handling code of SRDemo. I thought I'd post the issue here, as many of us (myself included) use some SRDemo code as the basis for our own applications.
The issue can be found in the oracle.srdemo.view.frameworkExt.SRDemoPageLifecycle class, specifically in the translateExceptionToFacesErrors method. I'll show the code that has the issue first, and explain the issue afterwards:
        if (numAttr > 0) {
            Iterator i = attributeErrors.keySet().iterator();
            while (i.hasNext()) {
                String attrNameKey = (String)i.next();
                 * Only add the error to show to the user if it was related
                 * to a field they can see on the screen. We accomplish this
                 * by checking whether there is a control binding in the current
                 * binding container by the same name as the attribute with
                 * the related exception that was reported.
                ControlBinding cb =
                    ADFUtils.findControlBinding(bc, attrNameKey);
                if (cb != null) {
                    String msg = (String)attributeErrors.get(attrNameKey);
                    if (cb instanceof JUCtrlAttrsBinding) {
                        attrNameKey = ((JUCtrlAttrsBinding)cb).getLabel();
                    JSFUtils.addFacesErrorMessage(attrNameKey, msg);
            }Now, this bit of code attempts to be "smart" and only show error messages relating to attributes if those attributes are in fact displayed on the screen. It does so by using a utility method to find a control binding for the attribute name. There are two issues with this code, one obvious, and one that is a bit more subtle.
The obvious issue: if there is a binding in the page definition, it doesn't necessarily mean that the attribute is shown on the screen. It's a good approximation, but not exact.
The other issue is more subtle, and led to errors being "eaten," or not shown, in our application. The issue comes if you are using an af:table to display and update your data. In that case, the findControlBinding will not find anything for that attribute, since the attribute is contained within a table binding.
Just posting this as a word to the wary.
Best,
john

somehow, this message got in the wrong thread....
Hi Frank,
Yes, I simply scripted it out this way to contrast the behaviour if the first attribute was read-only vs not read-only. I found the issue on a page in our app that was simply drag-and-drop the VO from the data control on the page.
It's quite annoying, because our particular use case that hit this error is a "save" button on the page. If the commit operation doesn't return any errors (and it doesn't in this use case!), we add a JSF message saying "save successful" - then the attribute errors are further added later in the page lifecycle, so we get 3 messages: "Save successful" and "Fix this error" and "Tried to set read-only attribute" - quite confusing to the end-user when the only message they should see is "fix this error."
At any rate, the fix is to simply re-order the attributes in the page definition - that doesn't affect the UI at all, other than to fix this issue.
John
it was supposed to be something like:
Hi Frank,
Thanks for the reply. I was simply posting this here so that people who use the SRDemo application techniques as a basis for developing the same functionality in their own apps (like me) can be aware of the issue, and avoid lots of head-scratching to figure out "what happened to the error message?"
John

Error Handling in File Adapter

I have been working on a requirement where the file adapter picks up the file and gives to the BPEL for processing the data.
So, in order to do Error Handling for file adapter, i have been reading the Oracle documentation for technology adapters. In that, some of the
points which i felt valuable for my error handling when using file adapter are the uniqueMessageSeparator property, fault-policies for rejected messages,
and one of the action for rejected messages could be writing the payload to a file or invoking any other webservice.
In my composite, i have configured the file adapter as a service for reading files, and i defined the xsd using the native format builder....If i put some data like 'aaaa' in the attribute of type integer , the .csv file is being picked up and its being passed to the BPEL without any error ? I believe there should be a translation error...right...
But i am not getting the error, please tell me if anything is wrong in my xsd....
Here is my xsd...
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/InboundService"
targetNamespace="http://TargetNamespace.com/InboundService"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
nxsd:hasHeader="true"
nxsd:headerLines="1"
nxsd:headerLinesTerminatedBy="${eol}"
>
<xsd:element name="names">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="name" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FirstName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="LastName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="Number" type="xsd:integer" nxsd:style="terminated" nxsd:terminatedBy="${eol}" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
And for DB Adapter, there is a property called SchemaValidation, i think that is not there for File adapter, by default it will take care of validation i guess....In another composite, my file adapter is picking up the .xml file and if i put any wrong data over there, that is working fine, i am getting the translation error, but only here in the case of csv file, i am not getting the error. Experts, please help me in this regard...I am using SOA 11G
Thanks,
Naresh

Hi Yatan,
Thanks for the reply. I did the same way, where my composite is picking up an XML file and translation error is coming. Even the fault policies are working fine, like writing to a file and even invoking other web service. Its really good that you have achieved the same thing in csv files. But the same thing i am unable to achieve when my file adapter is picking up the csv file. I really cant understand where i am doing wrong.
here is my XSD which i defined through my native builder format...
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/FileRecv"
targetNamespace="http://TargetNamespace.com/FileRecv"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
nxsd:hasHeader="true"
nxsd:headerLines="1"
nxsd:headerLinesTerminatedBy="${eol}"
>
<xsd:element name="Roots">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FirstName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="LastName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="Number" type="xsd:integer" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
the jca file ..
<adapter-config name="FileRecv" adapter="File Adapter" wsdlLocation="FileRecv.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter" UIincludeWildcard="n*.csv"/>
<endpoint-activation portType="Read_ptt" operation="Read">
<activation-spec className="oracle.tip.adapter.file.inbound.FileActivationSpec">
<property name="DeleteFile" value="true"/>
<property name="MinimumAge" value="0"/>
<property name="PhysicalDirectory" value="C:\files"/>
<property name="Recursive" value="false"/>
<property name="PollingFrequency" value="5"/>
<property name="IncludeFiles" value="n.*\.csv"/>
<property name="UseHeaders" value="false"/>
</activation-spec>
</endpoint-activation>
</adapter-config>
I told that the file will contain only 1 record while defining xsd and i kept a record whose values are John , Peter and akjdkjdskj.
Now if the data is like above, the file is still getting picked up without any translation error and the BPEL is getting completed successfully...
Is it possible for you to send your sample project and the csv file from which you have defined the xsd to me if you dont mind ?
Thanks,
Naresh

Error handling in File - XI - SOAP scenario without BPM

Hello!
We have a File -> XI -> SOAP scenario without BPM. The problem is that if the Web Service sends back an error XI tries to reprocess the same message again and again instead of taking the next one.
We do not want set the retry interval to NULL because most error cases are temporary connection problems and then also those messages would not automatically be reprocessed any more.
We also have to use BE instead of EO, otherwise the Web Service will not return a response. But we need the response to be sure that the processing was successful. The message volume in this scenario is quite high and we do not want to use BPM only for the error handling.
I know that from SP19 some additional adapter modules are available for async - sync scenarios without BPM. I tried to configure it like described in File - RFC - File without a BPM - Possible from SP 19. but it did not solve the problem. Does anybody have any other ideas? Thanks.
Regards, Tanja

Hi Tanja,
>>>The volume is 3000 messages/day on business days and 700 messages/day during weekends but the traffic will increase in the future
I think, you should check that out. It is assumedly only 2 days work to build a scenario:
IDoc -> BP
BP <-> SOAP/HTTP
BP -> IDoc (Acknowledgement)
In the process you need a condition branch, where you decide success or not. You need 2 Interface Mappings for filling the ALEAUD.
Just send 1000 IDocs to the Test-XI and look to performance monitoring at Runtime Workbench, to find out, how many message will be processed in one hour. Assumedly 3000 and more per day should be possible. The advantage would be to reduce number of systems (no file system) and messages (better monitoring) and using the standard (better maintenance).
>>>So you are suggesting I should use HTTP adapter and then add the SOAP header manually in a mapping?
Yes, build the SOAP envelop during the mapping. Most easy is to use XSL or, if your mapping is ready, an additionsal XSL. You can put the error into the Acknowledgement to see it in ERP transaction WE02.
Filling of ALEAUD fields:
E1ADHDR/MESTYP: original message type
E1ADHDR/E1STATE/DOCNUM: original IDoc number
E1ADHDR/E1STATE/STATUS: 68 in case of error, 53 in case of success
E1ADHDR/E1STATE/STATXT: Short description for R/3 user what has happend
I ve done such a scenario several times. That works without any problems.
Regards,
Udo

IDOC to SOAP asynchronous scenario Error handling

Need an expert!!!!!!!!! advise on error handling for IDOC--PI--
SOAP scenario.This is a asynchronous scenario where PI is calling a Legacy system using SOAP adapter.My question is how i can do error handling in this scenario.If i get an alert in pi with payload variable that would be fine, do i need to use BPM and if that is tthe case what will be steps.
Appreciate your help.
Manish

Hello Manish,
My question is how i can do error handling in this scenario.
Use the standard alert framework. Search on SDN / SAP Help for details.
do i need to use BPM and if that is tthe case what will be steps.
BPM is not required to raise alerts, as this is an async call.
Regards,
Neetesh

Error Handling on LSMW

Similar Messages

Maybe you are looking for