Error handling return code for Provide Statement

Hi Experts,
For select statement we have error handling return code sy-subrc.
What is the error handling return code for provide.. end provide statement.
Thanks,
Ragu

Ragu,
Same thing.
Check sy-subrc.
sy-subrc is the return code for all ABAP statements as far as I know.
Regards,
Dilek

Similar Messages

  • Communication error, CPIC return code 020, SAP return code 456

    Hi Gurus,
    I am facing this error in my BW system system log. "Communication error, CPIC return code 020, SAP return code 456"
    Can anyone please helpp in resolving this issue.
    Regards
    Peter

    Hi Peter,
    there is an pretty old note about a similar error ([CPIC return code 020, SAP return code 223|https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=512272&_NLANG=EN]). It was related to a BEX Patch. May be you should raise a note at the service market place for your issue.
    regards
    Siggi

  • CHECK OF UPDATE TASK Errors and RETURN CODE in RSVBCHCK.MX1

    hi ia m getting this error during the upgrade .i did checked in sm12 for any failed updates but there arent any .so i think there should be a table that i need to alter.should this be done in se16 ? and i think the table name is TRAN.LBWG any ideas.
    CHECK OF UPDATE TASK Errors and RETURN CODE in RSVBCHCK.MX1
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long tex
      Long text:
        Cause
          Changing the extract structure &V#& for application &V#& is not
          permitted, because the restructure table &V#& for the extractor still
          contains data in &V#&.
          You cannot change the structure in this status, because when you load
          an InfoPackage from BW, this leads to errors.
        What to do
          <DS:TRAN.LBWG>Delete</> the entries for all restructure tables for
          application &V#&.
    1 ETH010XRSVBCHCK: Check of open update requests
    A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long tex
    t" ""MC02M_0HDRSETUP""100"
    A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long tex
    t" ""MC02M_0ITMSETUP""100"
    A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long tex
    t" ""MC02M_0SCLSETUP""100"
    A2EEMCEX 141 Struct. appl. "03" cannot be changed due to setup table -> Long tex
    t" ""MC03BF0SETUP""100"
    A2EEMCEX 141 Struct. appl. "03" cannot be changed due to setup table -> Long tex
    t" ""MC03BX0SETUP""100"
    A2EEMCEX 141 Struct. appl. "03" cannot be changed due to setup table -> Long tex
    t" ""MC03UM0SETUP""100"
    A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long tex
    t" ""MC11VA0HDRSETUP""100"
    A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long tex
    t" ""MC11VA0ITMSETUP""100"
    A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long tex
    t" ""MC11VA0STHSETUP""100"
    A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long tex
    t" ""MC11V_0SSLSETUP""100"
    A2EEMCEX 141 Struct. appl. "13" cannot be changed due to setup table -> Long tex
    t" ""MC13VD0ITMSETUP""100"
    4 EPU202XEND OF SECTION BEING ANALYZED

    1. Call transaction SMQ1 and check whether all queues in all clients (client = '', queue name 'MCEX') have been processed. To process the queues, start the collective run report for each application in the displayed clients. If you no longer need the data in the BW system, deactivate the relevant extraction queues and DataSource in the LO cockpit (transaction LBWE) and delete the queue entries in transaction SMQ1.
    2. If you use the V3 update that is not serialized (usually only for application 03): Start collective run report RMBWV303. Then check the update orders in transaction SM13. If there are incorrect update orders in transaction SM13, correct the orders and then start the collective run report again. If you no longer require the update orders, you can delete them. There may be inconsistencies between tables VBMOD and VBHDR. For further information about this, see Notes 652310 and 67014.
    3. Before the upgrade, delete the contents of the setup tables. Execute report RMCEX_SETUP_ENTRIES to find out which setup tables still contain entries. You can use transaction LBWG to delete the contents of the setup tables for all clients.
    Unfortunately the check that the system carries out during the upgrade or when you import a Support Package does not display all affected applications. Therefore, Note 1083709 provides a check report that you can use to determine all affected applications and tables or queues.

  • Error:server return code 0x8002000E: file failed crc check

    Hi Experts,
                         I am trying to connect to repository in MDM through MDM ABAP API after all the configuration settings in MDMAPIC on execution of the report it gives the error   server return code 0x8002000E: file failed crc check, can anyone provide some helpfull in puts on this problem.
    Thanks,
    Vinay Yadav

    hi,
    follow this link:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=4119
    hope this may help you,
    Regards,
    srinivas

  • RFC Communication - error CPIC return code 020, SAP return code 665

    Hello,
    I have created RFC destination for connecting SCM system from Solution Manager. Both the systems are Unicode.
    I am getting the following error --
    ERROR                service '?' unknown
    LOCATION             SAP-Gateway on host gva4103 / sapgw00
    COMPONENT            NI (network interface)
    COUNTER              4028
    MODULE
    LINE
    RETURN CODE          -3
    SUBRC                    0
    RELEASE              640
    TIME                 Mon Apr 24 11:28:21 2006
    VERSION              37
    And in SM21, I am getting following description
    Communication error, CPIC return code 020, SAP return code 665
    Following are the things I have checked..
    1. RFC destination user checked, password reset in SM59 and in the target system
    2. checked entries in /etc/services - Entry sapgw03 is present.
    Please let me know what all things I need to check.
    Thanks and Regards,
    Vaibhav

    I solved the problem by myself.
    The problem was with the entry in services file only.
    I was checking the file on Target system, which had the entry. There was no entry in Host system services file. After modifying the file, the connection now works fine.
    Thus for RFC connection, entry of the target system gateway MUST be there in /etc/service of Host system.
    Regards,
    Vaibhav

  • PC/SC error SCardConnect return code = 80100009

    I created an application using the OpenCard Framework. I am using a Schlumberger Reflex USB v2 reader. When I run my application, I receive the following error "opencard.core.terminal.CardTerminalException: Pcsc10CardTerminal: PCSC Exception in method SCardConnect: PC/SC Error SCardConnect return code = 80100009".
    This return code corresponds to this variable in windows, SCARD_E_UNKNOWN_READER.
    I know the card reader and the PC/SC driver for the reader work correctly because I have used them with other applications.
    Is there some special configuration I have to make within the OpenCard Framework to have it recognize my reader? Or, is there some configuration I have to do within Windows 2000?
    Thanks

    My java code can detect is a card is in the reader introduced only if i run the program many times.
    With the i variable i debug that not the last running detects that the card was introduced.
    And i can detect that tha card was introduced only with these error.
    PLEASE HELP ME!!!!!!!!!
    Thanks in advanced
    My code looks like:
    import java.awt.Frame;
    import java.io.FileNotFoundException;
    import opencard.core.OpenCardException;
    import opencard.core.service.CardServiceException;
    import opencard.core.service.SmartCard;
    import opencard.core.service.CardRequest;
    import opencard.core.terminal.CardTerminalException;
    import opencard.core.util.OpenCardPropertyLoadingException;
    import opencard.opt.iso.fs.FileAccessCardService;
    import opencard.opt.iso.fs.CardFile;
    public class ReadFile {
         static int i = 16;
    public static void main(String[] args)
    System.out.println("reading smartcard file..."+ i);
    // here, the application code will be filled in
    try {
              SmartCard.start();
    //          wait for a smartcard with file access support
         CardRequest cr =
         new CardRequest(CardRequest.NEWCARD, null, FileAccessCardService.class);
         System.out.println("1");
         SmartCard sc = SmartCard.waitForCard(cr);
         System.out.println("2");
         FileAccessCardService facs = (FileAccessCardService)
         sc.getCardService(FileAccessCardService.class, true);
         System.out.println("3");
         CardFile root = new CardFile(facs);
         System.out.println("4");
         CardFile file = new CardFile(root, ":c009");
         System.out.println("5");
         byte[] data = facs.read(file.getPath(), 0,
         file.getLength() );
         System.out.println("6");
         sc.close();
         System.out.println("7");
         String entry = new String(data);
         System.out.println("8");
         entry = entry.trim();
         System.out.println("9");
         System.out.println(entry);
         System.out.println("10");
         } catch (OpenCardPropertyLoadingException e) {
              // TODO Auto-generated catch block
              e.printStackTrace();
         } catch (CardServiceException e) {
              // TODO Auto-generated catch block
              e.printStackTrace();
         } catch (CardTerminalException e) {
              cardInserted();
              e.printStackTrace();
         } catch (ClassNotFoundException e) {
              // TODO Auto-generated catch block
              e.printStackTrace();
         } catch (FileNotFoundException e) {
              // TODO Auto-generated catch block
              e.printStackTrace();
         } catch (OpenCardException e) {
              // TODO Auto-generated catch block
              e.printStackTrace();
         finally{
              try {
                   SmartCard.shutdown();
              } catch (CardTerminalException e) {
                   // TODO Auto-generated catch block
                   System.out.print("Halli Hallo ");
                   e.printStackTrace();
    System.exit(0);
    }//main
    static void cardInserted(){
         System.out.println("\ncardInserted" + i + "\n");
    }//cardInserted
    }

  • Transaction code to find return code for transport request

    Hi,
    I want to see  the return code for transport requests after importing to QAS from DEV. What is the transaction code to find return code and can you explain in brief.
    Thx,
    Vasu

    you can check it out in STMS
    wht you can do is ,,
    Run Tcode STMS > Overview imports (F5) > you will find all import queues > then click on the import queue in which u want to see the status of transport (DEV , QAS , PRD )
    > then find out the transport no > click on that > then click on logs or press ( ctrl + f4)
    Return code
    Meaning
    0000
    Transport performed without errors
    0004
    Warnings were issued. All objects were transported successfully. There were special actions for individual objects that may not have been intentional, for example, a warning is issued during the export if the request contains an object deletion.
    Read the warnings.
    0008
    Individual objects could not be transported successfully. You must analyze and correct the errors. Examples of import errors: Original object was not overwritten, Repaired object was not overwritten
    0012 or higher
    A critical error has occurred, probably not caused by the contents of the request. You must inform your system administrator.
    http://help.sap.com/saphelp_nw70/helpdata/en/57/38e26c4eb711d182bf0000e829fbfe/content.htm
    Hope this information will help you ,,
    Cheers
    dEE

  • DDIC ACTIVATION ERRORS and RETURN CODE in SAPA700VT1.LBP During Prepare

    Hi Gurus,
    For The Error mesage During prepare
    Restart logs of DB conversions found
    n Outstanding DB conversions found
    We refer the Upgrade Guide & followed the steps thro SE14 Choose >DB Requests> Terminated .
    Nothing found.
    Then we Edit the Table found in error log ( CONV ENTRY TBATG INDX/BIC/FZLDEL_C11               0600CREB 200710032STEAM) . & by mistekan used the option Extras > Force conversion.
    Now table TABTG is missing in from DATA Base & we are facing the Error
    DDIC ACTIVATION ERRORS and RETURN CODE in SAPA700VT1.LBP
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1 ETP111 exit code           : "12"
    Again when we check SE14  Choose >DB Requests> Terminated it shows one Entry TBATG but is not exist now
    Help me

    Hi,
    Did you checked SM13 or SMQ1? that´s the probable cause for that error, now you should open an OSS note or start all over again.

  • Communication error CPIC return code 019 SAP return  code 728. Delta error

    Hello Experts,
    Would just like to ask if what we suspect is correct. We have running deltas in process chains occurring every early morning. However, upon checking the delta that should have run today, I found that the delta did not push through. I only found this one dump in SM21 that I think is related to the issue:
    MNo.
    R49 Communication error, CPIC return code 019, SAP return code 728
    R5A > Conversation ID: 61442686                                  
    R49 Communication error, CPIC return code 019, SAP return code 728
    R64 > CPI-C function: CMSEND(SAP)                                
    R5A > Conversation ID: 61443687                                  
    R64 > CPI-C function: CMSEND(SAP)                                
    R49 Communication error, CPIC return code 019, SAP return code 728
    R5A > Conversation ID: 61444687                                  
    R64 > CPI-C function: CMSEND(SAP)
    Now we think that the delta did not push through because we are encountering issues with regards to our SAP R/3 system (the source system) and it is currently inaccessible. Did the delta not push through because of the issues and inaccessibility/uber slow processing of our SAP R/3 server? And is the error specified above illustrating this? Any explanation would help. I have already tried looking for similar issues but cannot find anything. Please help. Thanks!

    Hi
    As far I know, The SAP Gateway carries out CPI-C services within the SAP world, which are based on TCP/IP. These services enable SAP Systems and external programs to communicate with one another.
    CPI-C services can be used either in the ABAP program or for the external programs via the interfaces.
    As RFC (remote function call) is based on CPI-C, all RFC connections also pass through the SAP Gateway.
    Errors When Starting Remote Programs Using Remote Shell
    When you use remote shell to start CPIC programs on other hosts, the following conditions apply:
    The (gateway) UNIX ID must be available on the other host
    The gateway host must be entered in the remote host in the file ".rhosts". This file must be located in the HOME directory of the (gateway) UNIX ID.
    The program you want to start must be installed in the HOME directory of the (gateway) UNIX ID on the remote host.
    Read more from help
    http://help.sap.com/saphelp_nw04s/helpdata/en/99/5f8c0bcb7d4280aa862254cffceada/frameset.htm

  • Communication error, CPIC return code 017, SAP return code 236

    Hi guys,
    Need your advice, my SAP system suddenly appear this messages  ( SM21).
    Please assist me.
    Communication error, CPIC return code 017, SAP return code 236
    > CPI-C function: CMINIT(SAP) 

    Hi Uday,
    My SAP using ABAP. Version 4.7
    All RFC working fine except for the OSS
    Error message
    Details Page 2 Line 22 System Log: Local Analysis of ALBANIA                  1                                                                               
    Time     Ty. Nr Cl. User         Tcod MNo Text                                                          
    13:52:36 DIA 01 800 SYSADM            R49 Communication error, CPIC return code 017, SAP return code 236                                                                               
    Details                                                                               
    Recording at local and central time........................ 27.03.2009 13:52:36                          
    Task................ 57584 . 01 D1 Dialog work process No. 01                                            
    User................ SYSADM                                                                               
    Client.............. 800                                                                               
    Terminal............ 10.0.38.                                                                            
    Session............. 1                                                                               
    Transaction code....                                                                               
    Program name........ SAPMSSY1                                                                            
    Problem class....... K    SAP Web AS Problem                                                             
    Development class... STSK

  • Communication error, CPIC return code 017, SAP return code 450

    Hi All,
    can anyone please tell me more about this error Communication error, CPIC return code 017, SAP return code 450 which is displayed in sm21.
    We done post configuration of pi server yesterday, after the configuration we were able to log into Integration Directory and Visual Administator..
    But today were are not able to log into both .....while logging into both we are getting authentication error 401.
    we checked for users being locked but all users are not locked..even even tried reseting passwords,
    also restarted the server but didnt help..
    Reward points for helpfull Answers.
    Thanks and Regards,
    Srikanth.

    Hi Naidu,
    Most common reason encountered for this problem is authorizations on installation. it is important to  have both network and local machine admin rights when installing content server software. If you don't, the installation will be successful but you encounter the 401 error. Try reinstalling with correct authorization and you should resolve the issue.
    Try regenerating the roles. SU01 -> display each XI user -> open the roles -> double click on the role -> click on the User tab in the role screen then there will be a button for USER COMPARISON do that for all the roles in red.
    If that does'nt work out, Take a look at OSS Note 751856 and 796726.
    May be your security roles were not adjusted during the upgrade (Note 796726).
    if found worth pls do the req
    Thanx
    Sampath

  • Communication error, CPIC return code 002, SAP return code 679

    Hi,
    Our production system log displayed, large no.of
    "Communication error, CPIC return code 002, SAP return code 679". I could not able to find any OSS notes on this.
    Please explain with detail steps to resolve this issue or please tell me, If any OSS notes exists/
    Thanks in advance
    Regards
    Srinivas

    Well, I meant that there are a lot of notes available. Search for "CPIC error".
    Also, have you double clicked on the line in the log? That will also give you more information.
    Rob

  • Communication error, CPIC return code 017, SAP return code 223

    In sm59 its throughing error Communication error, CPIC return code 017, SAP return code 223 for SAPOSS connection.

    Return code 223 is  Network read error.
    Check out SAP Note : 421558, it may help you.
    Regards,
    Zaheer

  • R49 Communication error, CPIC return code 020, SAP return code 223

    SM21,every 15 minutes occurs the following error:
    R49 Communication error, CPIC return code 020, SAP return code 223
    R5A dialog id :5442063
    R64  CPI-C function: CMSEND(SAP)
    but the partner system can receive SAP data every 15 minutes.
    what does the error mean? and how to solve it ?
    thanks ahead.

    Hi,
      The following note  63347 provides more information about the error message.
    Regards
    Srivatsa.V

  • Error SCardConnect return code = 80100009 / How to use another SC reader?

    Hello,
    I have 2 card readers connected to my PC. One for harddrive encryption which is part of our internal security and another one for my development (Gemplus GemPC433-SL7). I have installed the OpenCard framework for the first time on my PC because I would like to write a small SmartCard Client application reading some data from a file stored in a smart card.
    My problem is that I would like to use the Gemplus card reader to do this but when I start the batch "GetSmartCard.bat" it seems that it is trying to read the card from the smartcard reader used for my harddrive encryption. Then I get the error PC/SC Error SCardConnect return code = 80100009.
    Can you please tell me how can I force OCF to use the other card reader (GemPC433-SL7)?
    Thanks in advance for your replies.
    Alain

    I managed to get the Gemplus terminal by using the following code. I can detect is the card is inserted by using "terminal.isCardPresent(0);" but when I execute the line "SmartCard sc = SmartCard.waitForCard(cr);"
    I get the error : "opencard.core.terminal.CardTerminalException: Pcsc10CardTerminal: PCSC Exception in method SCardGetStatusChange: error executing SCardGetStatusChange
    return code = 8010002e"
    package com.hitec.chipandpin;
    import opencard.core.service.SmartCard;
    import opencard.core.service.CardRequest;
    import opencard.opt.iso.fs.FileAccessCardService;
    import opencard.opt.iso.fs.CardFile;
    import opencard.core.terminal.CardTerminal;
    import opencard.core.*;
    import java.io.*;
    import opencard.core.terminal.*;
    import opencard.core.service.*;
    import opencard.core.util.*;
    import java.util.Enumeration;
    public class InitFile {
      public static void main(String[] args)
        System.out.println("initializing file...");
          try {
          // initialize framework
            SmartCard.start();
          // get the enumeration of presently registered card terminals
            Enumeration terminals = CardTerminalRegistry.getRegistry().getCardTerminals();
            CardTerminal terminal = null;
            while (terminals.hasMoreElements()) {
              terminal = (CardTerminal) terminals.nextElement();
              if (terminal.getName().indexOf("Gemplus GemPC433") != -1) {
                //Gemplus terminal found
                break;
            // wait for a smartcard with file access support
            CardRequest cr = new CardRequest(CardRequest.ANYCARD , terminal, FileAccessCardService.class);
            SmartCard sc = SmartCard.waitForCard(cr);
            FileAccessCardService facs = (FileAccessCardService)sc.getCardService(FileAccessCardService.class, true);
            CardFile root = new CardFile(facs);
            CardFile file = new CardFile(root, ":c009");
            String entry = args[0].replace(':', '\n');
            byte[] bytes = entry.getBytes();
            int length = bytes.length;
            byte[] data = new byte[file.getLength()];
            if (data.length < length) {
              length = data.length;
            System.arraycopy(bytes, 0, data, 0, length);
            // write the data to the file
            facs.write(file.getPath(), 0, data);
            System.out.println(entry);
          catch (Exception ex) {
            ex.printStackTrace(System.err);
    finally { // even in case of an error...
          try {
            SmartCard.shutdown();
          } catch (Exception e) {
            e.printStackTrace(System.err);
        System.exit(0);
    }Can anyone of you help me to solve this problem?
    Thanks in advance.
    Alain.

Maybe you are looking for