Error has occurred in RSDRO_UPDATE_ODS

We have one 8Z13VDITM delta load to five targets(Cubes and ODSs).
But it is giving error for one ODS target:
In Processing -->UPDATE RULE tree of Details tab in RSMO:
Error has occurred in RSDRO_UPDATE_ODS .
and in UPDATE we have this error:
Duplicate data record detected (DS ZCP_O11 , data package: 000001 , data record: 292 ).
But i checked in Z13VDITM for duplicate records of reord no 292..
it doesn't have any same duplicate record..
Any suggestions would be appreciated.
This is very critical and in Production......
Thanx.....

Hi,
RSDRO_UPDATE_ODS is a program which actually writes data in the ODS.
So if any error is faced during the writing of the data into the ODS then it will cause an error.
You can check in the PSA the records which are causing the error.
Meanwhile do your ODS has the setting for unique records or not?
thanks

Similar Messages

Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Calculation Services    2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Web Access              6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()     --- End of inner exception stack trace ---     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings()     at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList()     at Microsoft.Office...
2.the event in event viewer is:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2014/10/10 9:49:43
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      ***.net
Description:
An account failed to log on.
Subject:
Security ID:  NULL SID
Account Name:  -
Account Domain:  -
Logon ID:  0x0
Logon Type:   3
Account For Which Logon Failed:
Security ID:  NULL SID
Account Name:  ***
Account Domain:  ***
Failure Information:
Failure Reason:  An Error occured during Logon.
Status:   0xc000006d
Sub Status:  0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port:  63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length:  0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>4625</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12544</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
    <EventRecordID>37602685</EventRecordID>
    <Correlation />
    <Execution ProcessID="532" ThreadID="26096" />
    <Channel>Security</Channel>
    <Computer>***.net</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-0-0</Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="TargetUserSid">S-1-0-0</Data>
    <Data Name="TargetUserName">***</Data>
    <Data Name="TargetDomainName">***</Data>
    <Data Name="Status">0xc000006d</Data>
    <Data Name="FailureReason">%%2304</Data>
    <Data Name="SubStatus">0x0</Data>
    <Data Name="LogonType">3</Data>
    <Data Name="LogonProcessName">
    </Data>
    <Data Name="AuthenticationPackageName">NTLM</Data>
    <Data Name="WorkstationName">***</Data>
    <Data Name="TransmittedServices">-</Data>
    <Data Name="LmPackageName">-</Data>
    <Data Name="KeyLength">0</Data>
    <Data Name="ProcessId">0x0</Data>
    <Data Name="ProcessName">-</Data>
    <Data Name="IpAddress">***</Data>
    <Data Name="IpPort">63664</Data>
</EventData>
</Event>

Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support

A critical error has occured. Processing of the service had to be terminate

When manager wants to approve the employee leave request its giving following error.
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE:com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.lea.form.FcForm.getCustomizing(FcForm.java:1020)
     at com.sap.xss.hr.lea.form.FcForm.onInit(FcForm.java:417)
     at com.sap.xss.hr.lea.form.wdp.InternalFcForm.onInit(InternalFcForm.java:2053)
     at com.sap.xss.hr.lea.form.FcFormInterface.onInit(FcFormInterface.java:184)
     at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface.onInit(InternalFcFormInterface.java:1911)
     at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface$External.onInit(InternalFcFormInterface.java:2007)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
     at com.sap.xss.hr.lea.worklist.VcWorkList.onInit(VcWorkList.java:267)
     at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkList.onInit(InternalVcWorkList.java:363)
     at com.sap.xss.hr.lea.worklist.VcWorkListInterface.onInit(VcWorkListInterface.java:164)
     at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkListInterface.onInit(InternalVcWorkListInterface.java:144)
     at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkListInterface$External.onInit(InternalVcWorkListInterface.java:220)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Access via 'NULL' object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.hr.lea.model.LeaveRequestAdaptiveModel.pt_Arq_Customizing_Get(LeaveRequestAdaptiveModel.java:392)
     at com.sap.xss.hr.lea.model.Pt_Arq_Customizing_Get_Input.doExecute(Pt_Arq_Customizing_Get_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 47 more
   kindly help ASAP,

Hi,
Did you give enough authorizations to the user at the beack end.
Just Try giving SAP_ALL authorizations and check.
Regards,
Santhosh

Error Message: Sorry, a serious error has occurred that...

This seems to be a common problem, however, I have not found a fix. I am somewhat technologically savvy, but limited! Listed below are my specs and details to the problem.
Software- Premiere Pro (Version 5.03) Recently updated
OS- WIN7 Core 2 Duo CPU E8400 3.00GHz 4.00GB RAM
Footage used- all types
Error message text-
Sorry, a serious error has occurred that requires, Adobe Premiere Pro to shut down. We will attempt to save your project.
The problem-
When attempting to start PP it allows me to start a new project, select setting, and sequences. However, as the program begins to start up the new project the error pops up. The only option is to click ok, which in turn locks up the program.
Also any files that I have previous created also will not open properly.
Also, I have recently lost a drive that contained many of my old PP projects. I've read that some people have this problem when losing a drive that once related to possible PP preferences and scratch disks...once again I am limited on understanding how that all works.
I have restarted, cold boots, warm boots....clean uninstall, clean reinstall of PP and all components, updated chipset, display adaptor is up-to-date (NVIDIA GeForce 9300 GE) ...also I am an administrator of the workstation
**Through my many failed attempts from reading forums I have also at sometimes received a RunTime Error R6025 (pure virtual function call)
I have no 3rd party effects
not using Mecury to my knowledge.?

Has it worked OK in the past? If so, try System Restore.
While your computer might meet Adobe's minimum requirements, it is way underpowered to run Premiere Pro properly.
See here:
http://forums.adobe.com/message/6336879#6336879

Error Message: Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down.

Hi. I'm having another serious problem with CS4 (the version that comes with CS5 when you don't have 64 bit capability. I just finished a project, had saved it, and then had switched over to Adobe Encoder to create a finished flash video (which worked perfectly). I shut down CS4, went home, tried to restart the main project to create a video from the same project (wanted to make an mpeg version as well) and got the following error message:
Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down. We will attempt to save your current project. Then the system shuts down.
Not only can I not open the project I was working on, I cannot open any of my prior projects without receiving the same error.
Does anyone have any idea what may be causing this issue and how to resolve it?
Thanks in advance for any suggestions.
By the way, is everyone else having the same amount of problems with this software? I've never had any software that has had so many problems from the beginning. My opinion of this software and Adobe in general has gone down substantially.

Not enough information for anyone to even make a guess
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link

An error has occurred:Invalid postback or callback argument in InfoView

Hi Friends,
When i try to change the parameter values and click OK button while scheduling a report in InfoView, i am getting the following error:
An error has occurred:Invalid postback or callback argument. Event validation is enabled using in configuration or in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager. RegisterForEventValidation method in order to register the postback or callback data for validation.
Till now i have not find any good solution for this. Please help in providing any better solutions to fix this.
Edited by: Shivananda Puli on Aug 6, 2010 11:55 AM
Edited by: Shivananda Puli on Aug 6, 2010 11:55 AM

This forum is for questions in regards to using the SDK within a custom application, since you are using Infoview, please post this in the applicable forum under the [Business Objects|/community [original link is broken]; section

A communication error has occurred while invoking commands in SharePoint host process

Hi All,
I am using Virtual box to connect to Sharepoint 2013 VPC. Due to an unexpected sutdown of my machine the VPC got some issue. Now I restored it using my bak up file. But after this when I deploy my sharepoint 2013 farm solution Iam getting the following error.
Error occurred in deployment step 'Recycle IIS Application Pool': A communication error has occurred while invoking commands in SharePoint host process: The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature
session shutdown or an internal server error.
What could be the issue? Any suggestions ?
Thanks in advance...
Regards
Nimisha
[email protected]

Hi Nimisha,
Seems that the original issue of communication error has been solved, for this new issue, it is recommended that you open a new thread which can make others easier
to focus on one issue in one single thread.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. Why?

I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. How do I solve this problem?

Make sure you have the correct country selected. Click the round flag icon bottom right side of the App Store window.

HT201303 An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...

An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...

urgh... just noticed my previous post said i have mountain lion... i meant that i have snow leopard. no idea why i messed that up!
anyway, i just tried reinstalling snow leopard from the usb key that came with the computer. Then, I installed software updates until it told me there were no more updates. After that, I tried the app store again, and it still is giving me the unknown error. really irked by that. may have to take it back to the apple store yet again, to see if i can figure out why the app store won't work.

Photoshop CC 2014 - The file can not be saved in path because an error has occurred

Hello,
I need again help regarding this issue. Sometimes but very often I receive an error, trying to save a PSD file, the error is: "The file can not be saved in <path> because an error has occurred". After that it is not possible to save the file in any format, using save or save in dialog. The only way to rescue the result is, to save for web as an jpeg. This error occours often using Topaz or NIK filter and until now only in PS-CC 2014. My workflow looks like this:
- Open NEF RAW file in Brdige
- Settings in ACR and give it into PS by clicking OK in ACR
- In PS doing a adjust some levels
- press SHIFT+STRG+ALT+E for a new summary layer
- Uing Topaz Adjust on the new level with 65% opacity
- press SHIFT+STRG+ALT+E for a new summary layer
- Using Topaz DeNoise on the new layer
- pres STRG+i and resize the image to 1200x797
- Using Topaz InFocus on the same layer as DeNoise
- create a vignette with brightness adjustlayer
After this workflow in nearly 90% it is not possible to save the file as PSD or something else, only to save for web as JPG. If I save the file after opening the RAW in PS and after every layer with Topaz Filter, I can save the file when I am done. Same issue occurs using NIK Filters in that way.
I tried to optimize the performance by using this guide: http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html doesn’t solve the issue.
I re- and installed all Adobe Products more than three times, doesn't solve the issu.
After that I ordered a new SSD drive and insall Windows 7 64bit inkl. All latest hotfixes, patches and drivers. I downloaded the newest Adobe Versions and the newest filter sets from Topaz and NIK. Doesn’t solve the issue.
This is my rig:
Gigabyte Z87X-UD4H mainboard
Intel Core i7 4770k
32GB Corsair RAM
250GB Samsung 840 Evo SSD Drive
nVidia Geforce GTX770
During my tests I took the same RAW File and created nearly 20 adjustment layers and summary layers, without using Topaz or NIK filters. No problem, I was able to save the file as PSD file.
From my point of view, actually, the error occurs only when I am using Topaz or NIK filters. Both supports doesn’t know the issue and if I search the web, I can’t find more then me. It seemed to depend on my settings, my rig or something else, perhaps a cache is overflowed or something like this. Adobe telephone support can’t help because I said I use a third party filter. But it occurs with two different manufactures…
So please guys, help me to figure out why this error occurs in my system.
Thanks in Advance and best regards,
Michael

Update: I tried several times to reproduce the error, actually it dosen't occur. I changed nothing on my system, without reboot it twice. This is what I said in my beginning times: it occurs sometimes but often. I will keep you up to date.

unable to log in at this time because an error has occured

Colleague came in over weekend to use a specific PowerMac and large screen rather than her usual MacBook Pro.
She was unable to login as 'herself' as she repeatedly got the message that she was <<unable to log in at this time because an error has occured>>.
No 'headshaking' as if she had given the wrong password, but she couldn't log in or accesss our sharepoints.
She tried another desktop Mac (a macmini) and got same result...
She could (and today still can) happily log in to the server via her laptop...
What gives?

We just had a similar issue here.
On the MacBook Pro, we needed a new user to log in. Existing MBP users were fine, new users no chance, although administrator accounts were OK. OSX 10.7.4, same issue with 10.7.5.
Clues were found elsewhere on this site (https://discussions.apple.com/thread/4140320?start=0&tstart=0), but what we did to fix it was this:-
Ensure the Mac will create a local folder for new user accounts (top tick-box)
In AD, turn off the Z: drive mapping to the home folder (or whatever drive you use) for that particular user
On the Mac, log in and let it create the local home folder
In AD, turn the drive mapping back on and respecify the home folder path
The account should now continue to work as it's already created the local home folder.
Admin accounts worked because we don't map the home folder for those. Originally we were mapping using a logon script, which is why we didn't have an issue when setting up the other users initially. What probably doesn't help is that we use DFS, and the Macs don't like talking to DFS (we have to map to the \\servername\share instead of \\domainname\dfs-share for those).
Hope this helps. Many thanks to user "Think Touch" for providing the clues.

When I try to log on to my ichat I get the error message "An undefined AIM socket error has occurred.". How do I resolve this?

The error message "An undefined AIM socket error has occurred." comes up when I try and log on to ichat.

I have the same issue. Does anybody know why this has happened

Business rule in MDS 2012 error: A database error has occurred. Contact your system administrator.

I get the following information in my MDS log as well as the above error message when I execute a business rule that has a condition of AND and an Action of Attribute must be unique in combination with 2 other attributes.
I'm running SQL Server 2012 11.0.3000
MDS database version 11.1.0.0
Any ideas?
MDS Error: 0 : SqlException message: A database error has occurred. Contact your system administrator.
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.HandleExceptions(Exception ex)
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteDataSet(String spName, CloseConnectionBehavior closeBehavior, Object[] parameterValues)
at Microsoft.MasterDataServices.Core.DataAccess.MasterDataAccess.<>c__DisplayClass5.<ValidateEntityMembers>b__4()
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteMethodWithDeadlockProtection(MethodDelegate method)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.ValidateMembers(Int32 versionId, Identifier entityIdentifier, IList`1 memberIds, RequestContext context, OperationResult results)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.Process(ValidationProcessCriteria criteria, Boolean commitVersion, Boolean validateEntityAsync, Boolean returnValidationResults, RequestContext context, OperationResult results)
SQL Error Debug Info: Number: 208, Message: Invalid object name 'cteDuplicates0a070e37b106b9e3efe35a455076efa7'., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: , Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpBusinessRule_AttributeMemberController, Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpValidateMembers, Line: 0
DateTime=2013-08-15T13:25:15.6684023Z
MDS Error: 0 : <ArrayOfError xmlns="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Error>
<Code>208</Code>
<Context i:nil="true" />
<Description>A database error has occurred. Contact your system administrator.</Description>
</Error>
</ArrayOfError>
DateTime=2013-08-15T13:25:15.7152026Z

OK I bit the bullet and contacted support on this one.
There is a known issue with MDS 2012 and business rules with a combination of "must be unique" attributes. If you do not list the attributes in the same order that they were created you will get the generic error I cited. At first they told me it must be
in the same order the attributes are in and that worked on one entity but not the other. The difference was that in the second entity I previously rearranged the attributes in question. Once I changed the order in the business rule to reflect the *original*
order it worked like a champ.
Hopefully this helps save someone some time and money.

Test-OutlookConnectivity WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.

Hi All,
When we do a test-outlookconnectivity -protocol:http the result is a success but then we get the following:
ClientAccessServer   ServiceEndpoint                               Scenario
Result Latency
(MS)
xxxxxxxxxxxx... xxxxxxxxxxxxxx                 Autodiscover: Web service request. Success   46.80
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance
of an object.
Object reference not set to an instance of an object.
    + CategoryInfo          : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
    + FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
So it looks like it's not completing successfully.
I can't find anything on this in particular, and don't really know how to go about solving it - We are fully up to date, Exchange 2010 Sp2 with Rollup 5-v2
Any help appreciated!

hi,
I have the same issue also on Exchange 2010 SP2 RU5v2
I ran your command and get the below
[PS] C:\Installs\report\Activesync>Test-OutlookConnectivity -Protocol:http |FL
RunspaceId                  : ebd2c626-1634-40ad-a17e-c9a713d1a62b
ServiceEndpoint             : autodiscover.domain.com
Id                          : Autodiscover
ClientAccessServer          : CAS01.domain.com
Scenario                    : Autodiscover: Web service request.
ScenarioDescription         :
PerformanceCounterName      :
Result                      : Success
Error                       :
UserName                    : Gazpromuk.intra\extest_645e41faa55f4
StartTime                   : 8/21/2013 4:08:50 PM
Latency                     : 00:00:00.1250048
EventType                   : Success
LatencyInMillisecondsString : 125.00
Identity                    :
IsValid                     : True
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.
Object reference not set to an instance of an object.
    + CategoryInfo          : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
    + FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
Any help would be greatly appreciated, I also get random failures of OWA, EAS and web services, very frustrating
I have no errors in the app event log
thanks
Faisal Saleem Windows Systems Analyst 07595781867

"An error has occurred:Object reference not set to an instance of an object."

This error message comes up with a user in InfoView. The user schedules a report, updates parameters, and the report kicks off successfully. But then a few minutes later, this error is received. This occurs sporadically, regardless of the length of time of report or amount of data being retrieved. Sometimes the report runs to completion. Other times this error message occurs.
Has anyone seen this before and have any thoughts?
Thank you.
“An error has occurred:Object reference not set to an instance of an object.”

Are you able to replicate the issue both in Java and .NET InfoView?
For .NET InfoView, sometimes the "An error has occurred: Object reference not set to an instance of an object" error shows up after the .NET Framework is upgraded to 2.0

Error has occurred in RSDRO_UPDATE_ODS

Similar Messages

Maybe you are looking for