Error HRPAY99PM271 in Process Model for Offcycle (6.0 Upgrade Issue)

We have a process model for offcycle payments and need to change RPCIPE00 to RPCIPE00_OLD. The first problem we had with this was solved by OSS note 1070580. Now we are getting error HRPAY99PM271 (Parameter PNPPERID was not found in the selection parameters). PNPPERID was not used in the 5.0 version of the process model, so I do not know why we are getting this error. Thanks for any advice/ideas!

The process model was activated. Thanks.

Similar Messages

File2idoc:Error in ALE distribution model for SendResponse

Hi,
I'm using XI to configure a file to idoc scenario.
Now in WE19 I could see relevant data,but in WE05 it showed the error status 51,and the detail message was "Error in ALE distribution model for SendResponse".
Do I have to create a distribution model in BD64?I did this ,but failed to create.

hi,
i dont think distribution model is required for inbound case.
just check the below configuration.
File To IDOC - Part1 (SLD and Design):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
chirag

Error in getting process status for oracle instance: instance12- component: coreapplication_obisch1

Hi,
while uploading new rpd getting error message in enterpriise manger
Error in getting process status for oracle instance: instance12- component: coreapplication_obisch1,chekced in the dignostic log found above mentioned error
what can be cause of the probelm
thanks

Hi,
1.Try using the sample rpd of it works, then the problem with the new rpd.
2. Restart the service once then upload the new rpd.
Regards,
VG

Business Process Modeling for Online Mobile Solutions

Hi,
I like to know what are the options available for business process modeling for online mobile applications? I feel Guided Procedure can be used for that but one issue is the standard GP Runtime view may not be suitable for Mobile displays and needs to be modified. Is there any other option available specifically for mobile solutions? Also I read in one article in SCN about a product call Mobile Fast Track (MFT) which is supposed to be delivered on Visual Composer. Is it already available? If yes which release and how to get that?
Any pointers on these will be highly appreciated.
Thanks,
Dipankar

Hi Alvaro Hernán Rojas R ,
The product line is the hierarchy of the finished goods.
It is pertinent that the finished goods has emerged due to some process(es) carried on the raw material.
Thus logically you should map in solution manager based on the process only.
The macro process while depicts the processes at the highest level.The Business scenarios, Business Process gives a good idea about how you should go about configuring.The Steps/activities helps you to map in to SAP thro' T/Codes.
From the point of view of all of the below three,namely,
Easy configuration activities
Easy design of Unit and integration test
Easy activities of Process enhancement and optimization,
the option Map the process as ISO Standards
- Several projects : For each product line,will be most ideal.
It is the processes that drives the activities.The control activities like internal control etc are all process based.Given these,divorcing the business process from the configuration -as in -is certainly not a good practice.
Hope this helps.
Regards,
Ramesh

Best way to modify Sequential Process Model for report generation.

I am using the Sequential Process Model in my application and the TestStand Reference Manual, (Figure A-1), clearly shows the following processing sequence:
...<part removed>
Call the Test Sequence
Display the UUT results
Generate a Report
Log Result to a Database
...<more removed>
I want to generate the report BEFORE displaying the results to the operator, or at a minimum, I want to generate the report in parallel with displaying the results to the operator. Currently, the problem I have is that when the test is done I have some automated scripts that take the data file and do some statistical processing on it, but the way the Sequential Process Model is set up, the test might finish but until the operator acknowledges the PASS/FAIL results display, the resulting file is never created. It could be overnight, over the weekend, or several days before an operator comes back and says, "Oh that last test finished, I guess I can press the OK button!", but until they do, I get no data. So I want the report generated no matter what, and right after the test finishes.
Any ideas as to how that might be best accomplished?
Thanks a billion - Ski (noob)

Ray,
Is that new in 4.2 that the engine won't call a callback with nothing in it? I just did it and it seemed to work fine. I'm using 4.1.1 though.
Ski,
Maybe there is a better solution for what you want. Are you using the SequentialModel? What version of TS do you use? Why does the report have to be written before the pass/fail banner displays? The pass/fail banner gets displayed in the PostUUT callback. Like Ray said if you just put that in your client sequence you won't see the banners. However, I'm assuming there is more to this than just that. I'm assuming you want to see the report because of your external analyzer that is gathering the statistical data. And then based on that data you want to allow the user other options. Is this correct?
If so then I would override the PostUUT callback and then use a different callback (possible the ProcessCleanup callback) to displaly the banners. You could even do this without modifying the process model (which I always try to avoid). Just override both the PostUUT and ProcessCleanup callbacks. And then put code in the ProcessCleanup to behave like you need.
Or if you want you can modify the process model and create a new callback lower in the process model. Then have that new one do the post report analysis.
Just some thoughts.
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Getting the following error while creating the model for webdynpro app.

Plugin Name: Web Dynpro Model Editor Services
Plugin ID : com.sap.ide.webdynpro.service.modeleditor
Class :ap.ide.webdynpro.modeleditor.wizards.model. creation.ModelDialog
Method : nextPressed
Exception : org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NoClassDefFoundError)
This is the error i am getting while creating the model for the webdynpro application. Can some one help ?
Thanks & Regards
Lalith

hi
This error occurs mainly due to the reason that particular plugin is not there in the NWDS.
So please try to reinstall the NWDS or try tracing out whether that particular plugin is there or not.
Thank,
kris

Process modeling for HR

Hi all,
could you please let me know how to do the HR process modeling????

Raju,
Welcome to BPX..
By HR Process Modeling - what exactly do you seek ... you could look into the solution maps available for SAP HR and see if anything there interests you..
Look up the various business maps available @ http://www.sap.com/solutions/businessmaps/index.epx
and see if there is anything specific to your industry...
Arun
Message was edited by:
Arun Varadarajan

High level process model for a Pulp & Paper Industry

Hi:
Someone can help me?, i'm looking for a organizational reference model for a pulp & paper company, under the alignment for best practices in to SAP R/3
I need know what is the best model for this kind company (chain value, macro process, business process, sub process...)
Thanks in advance
Omar Perea

hi,
thanks for yor points.
at that time it was opened.for me also it was warning the same, any way iam providing some more info on it. pls have a look on it.
Pulp and paper industry facing IT modernisation needs
Today most pulp and paper industry companies face serious financial challenges to increase return on investment and improve capital utilisation.
Companies are working to improve the efficiency of their supply chains and thereby reduce working capital, increase transaction velocity and improve inventory turnover. Mergers, acquisitions and alliances are reshaping the pulp and paper industry. Although the pulp and paper industry has invested heavily in IT systems, a large variety of old systems is often complex, inflexible in regard to integration and difficult to operate. As they reflect past organisations and business models, the streamlining of business processes is difficult.
Mega trends in the pulp and paper industry IT.
The pulp and paper industry is stepping into a new phase of business evolution driven by consolidation of industry, globalisation and ever-increasing competition. These market drivers are forcing the pulp and paper industry to put a greater focus on cost efficiency. These focuses are creating totally new challenges for the organisation, specifically in the IT area.
IT is increasingly becoming a commodity. This is a result of product standardisation and the popularity of off-the-shelf-products that facilitate the economies of scale. This phenomenon is also supported by increasing utilisation of competence resources in low-cost countries.
Managing change becomes more and more difficult. Very often companies face the need for new changes before they have seen the benefits of the previous ones. The cycle of change is short and the transformation environment becomes very complicated. On the other hand, IT becomes the tool in forcing business changes to happen. Often the only practical way to roll out new processes and practices is through the modernisation of information systems.
Like many other industries, the pulp and paper industry is concentrating on providing digitalised self-services as part of their business development.
Industry background
Since the consolidation and globalisation of the pulp and paper industry, there has been increasing pressure to continuously improve both its internal and external efficiency. In the large pulp and paper mills, production management systems typically consist of several different systems, which might also be from different suppliers. Systems are often isolated islands, which are successful in managing information of their own area but they lack the comprehensive information exploiting and sharing. This has resulted in a complex and inflexible architecture of legacy systems. These legacy systems are expensive to manage and difficult to develop to meet business requirements.
This pressure has led to massive IT investments and a continuous rebuild of the IT environments in order to meet efficiency challenges. Although many pulp and paper mills have invested a lot in building up their business supporting IT, especially Enterprise Resource Planning (ERP) systems, the return on investment is often difficult to measure. There is a lot of potential to improve usability of systems by harmonising business processes and integrating the systems more efficiently in order to better support actual business needs.
Most pulp and paper industry companies have thus come to a point where a more radical rebuild and renewal of the entire IT and network environment is required. Fortunately, the conditions for this have improved over the last few years, due largely to an increasing range of commercially available application platforms adopted for the pulp and paper industry, the acceptance of common industry standards, and the evolution of refined integration and migration methods.
Renewing and harmonising the companys operations and IT systems is still, however, a demanding undertaking. Securing continuous operations, while at the same time replacing the core systems and processes, requires a high level of expertise in pulp and paper industry processes and information technology. To complement the in-house competence, the pulp and paper industry will need to establish partnerships with outside solution providers and system integrators. To minimise risks and keep control of business-critical technology, new delivery models will be a necessity.
i am also giving some pdf sites pls go thru them
www.fpl.fs.fed.us/documnts/pdf2000/scott00c.pdf
www.bfe.admin.ch/php/modules/publikationen/stream.php?extlang=en&name=en_542051780.pdf
thanks
karthik

Error in creating a Model for Ruby on Rails project

Hello,
I am working on NetBeans IDE 6.0 and creating a project on Rails Application.
I am trying to make a Model that should give me a list of .rb files. But, some parser error occurs and i the .rb files are not getting generated.
This error has become a bottleneck in creating my project.
Can anybody help me resolve this issue.
Regards
Meenal

Onur,
Oracle JDeveloper also has a technologies known a JClient that handles the binding for you. Not sure if your requirement is to handle table models yourself, but if it is for database data retrieval then JClient is more efficient.
Frank

Error while creating process chain for flat file loading

Hi All,
I had Created a process Chain to load Transactiion data(Full load) form flat file which is in my computer.
start>Load>DTP>DeleteIndex>DTP loading CUBE--> Create Index
but the system is throwing an error as "An upload from the client workstation in the background is not possible."
I dont know why this error is coming?
Can some one help me
Regards
Mamta

Hi Mamta,
Basically if you want to load the DS through FF using process chain, the FF has to be placed in Application server. We cant load the FF when it is located in the client local workstation(FF On your PC).
So better you remove the Infopackage step from the PC. Load the IP manually. Once it is completed you can start the process chain with the following steps:
start>DTP>DeleteIndex>DTP loading CUBE> Create Index
Hope it is clear & helpful!
Regards,
Pavan

Error in Post Processing Action for a Conc-Request

Hi,
I am using XMLP 5.5 and facing the following issue with a particular report. The issue is not encountered when tested in the XMLP 5.5 Desktop Viewer, but gives the following error when run EBS 11i10.
The following is the OPP log:
[1/23/06 12:31:09 PM] [UNEXPECTED] [44876:RT7168339] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:580)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:378)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:197)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:156)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:916)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:869)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:204)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1535)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:925)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:2108)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:1368)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:229)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: oracle.xdo.parser.v2.XPathException: Cannot convert to number.
     at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1526)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:517)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:485)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:264)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:150)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:187)
     ... 17 more
The issue is that it reads "Cannot convert to Number". But i am not sure as to which form field is causing this error as i dint encounter this issue while testing it with Template Viewer.
The template i am using contains lots of form-fields and its difficult now to determine which field is causing this error. Can someone in the forum help me in finding out which form field is causing this issue. Is there some way i can find that a particular field in the template is causing this issue.
TIA,
Nitin Jain

Hi Nitin
1. Do you have 5.5 installed in Apps? They must match if you have used any 5.5 features in your template and you do not have 5.5 on the server then you are going to get issues.
I suspect its not #1 but be sure.
2. Are you carrying out any calculations in your template or formatting a field as a number ?
It might be working on your test data because that is good data. When running live you may be getting bad data or nulls and you are not handling it in your template correctly?
The only real way is to start removing sections of the report and testing until you can pinpoint the problem. Then check to see if the data is corrupted in that field.
In the next release (of course) things gets better around errors and warnings.
Regards, Tim

Rendering Error - Unable to process memory for antialias file name

I am currently trying to render a project. I am using AE 5.5. It's a kinetic typography project. It renders til about 2:02, when I need it to render all of 4 minutes and 7 seconds. I feel like it should be a memory problem.. Any help would be greatly appreciated as my project is due tonight at midnight.

Thanks for the help. I appreciate all of the input I am getting. I'd be lost otherwise.
Todd- I think I am going to have to just keep doing what I'm doing because it seems to be rendering the second half smoothly. However, in the future I will definitely use the image sequencing technique becuase in this project, there are going to be some noticable gaps/chops in the video becuase I basically had to guess where to start the next clip.

How To Access Variables In Process Model For Use In Main Sequence

Hi everyone, in my sequence file I callback the PreUUT sequence file. I want to be able to use one of the local variables I assign in this callback sequence in my main sequence. In my main sequence this variable will trigger if I should run some tests or not in my main sequence. Is this possible? How would I do this?
Thanks so much!

U need to make a parameter in your Callback, parameters are seen outside of sequences, then in PreUUT u will make statement to update parameter, or use the parameter in your callback directly
Parameters.MyPara=Locals.MyLoc
etc

An interesting model for ADF... having issues...

I have three tables. One is a Topic, one is Policy and one is User. Topic has an Id, Title, Description. Policy has an Id, TopicId, UserId, and Role. User has an Id and UserName.
Topic 0.1...* Policy *...1 User
A Policy will have one and only one User.
I need to set up VO that will show all Topic(s) with no Policy, plus any Topic(s) where the bind variable in the VO of :LoginUserId = User.Id. I need to display:
Title + Description + Role + UserName
I set it up with a master VO for Topic EO (including Policy and User as Reference EO) hiding the Id attributes. Then I set up a VO for Topic EO showing only Topic.Id=Policy.TopicId AND Policy.UserId=User.Id AND User.Id=:LoginUserId.
I can't figure out how to link these view objects so I can get the right results. The second VO works fine when I enter a User.Id assigned to a Policy for a Topic. But how can I link the two VOs so that all the results are combined into one list?
Thanks!!!!

I really appreciate your trying to help.
I tried the following using JDev in the Read-Only VO:
SELECT
RLS_TABLE_EXAMPLE.TITLE TITLE,
RLS_TABLE_EXAMPLE.DESCRIPTION DESCRIPTION,
RLS_POLICY.ROLE ROLE,
RLS_USER_EXAMPLE.USER_NAME USER_NAME
FROM
RLS_TABLE_EXAMPLE,
RLS_POLICY,
RLS_USER_EXAMPLE
WHERE
RLS_TABLE_EXAMPLE.ROW_ID = RLS_POLICY.SEC_ROW_ID AND RLS_POLICY.USER_ID LIKE :UserLoginId AND RLS_POLICY.USER_ID = RLS_USER_EXAMPLE.ROW_ID(+)
UNION
SELECT
RLS_TABLE_EXAMPLE.TITLE TITLE,
RLS_TABLE_EXAMPLE.DESCRIPTION DESCRIPTION,
RLS_POLICY.ROLE ROLE,
RLS_USER_EXAMPLE.USER_NAME USER_NAME
FROM
RLS_TABLE_EXAMPLE,
RLS_POLICY,
RLS_USER_EXAMPLE
WHERE
RLS_TABLE_EXAMPLE.ROW_ID = RLS_POLICY.SEC_ROW_ID AND RLS_POLICY.USER_ID = RLS_USER_EXAMPLE.ROW_ID(+)
And while the Query was "Valid" it still only returns 1 row if I input the User_Id in the one Policy. It doesn't return the other 3 rows for the Topics that have no Policy (outer join is failing)...
ARGGGH!

Runtime error in process model and sequence still passes

I am doing some custom initialization in the process model (in the ProcessSetup callback). I call a .NET module that may throw an exception under certain error conditions. This causes the the process model to jump to the Cleanup section of the process model (not the client sequence file cleanup) and that's okay. The problem I have is that in my UI I am getting the AxAppMgr_ExecutionEnded event and the e argument's exec.ResultStatus property indicates "Passed". I want it to indicate "Error" or "Incomplete" or something other than passed. The client sequence never ran at all. While it had no failures, it could not have passed.
How do I force the status to be "Error" or something other than "Passed"?
Solved!
Go to Solution.

Ryan,
I am just getting back to this. Thanks for the response.
I have my own sequence that gets called from ProcessSetup in the process model. That sequence sets up some station global variables for me including some Object References. One of the object references is a .NET object used to read a file. If that file does not exist, then the .NET object throws an exception which results in TestStand presenting a dialog with the error message and options about what to do next. I don't want our technicians getting that dialog box so I changed the Station Options to "Run Cleanup" on Run-time error.
The process model jumps to its Cleanup section when the run-time error is received.
Does that give you the information you need?
Incidentally, I am able to look at the e.exec.ErrorObject in the AxAppMgr_EndExecution event handler and I can see the error as suggested by Doug above.
Thanks.

Error HRPAY99PM271 in Process Model for Offcycle (6.0 Upgrade Issue)

Similar Messages

Maybe you are looking for