Error HUDIALOG 038 while deleting HU's via VL32N (Inbound Delivery)

Dear All,
We have a situation here wherein we are creating Inbound deliveries automatically from Outbound delivery during goods issue.
As a result the (Handling Units) are also assigned from  outbound  to inbound delivery.
We want to delete these HU's manually from transaction VL32N but while doing so an error occurs saying
'Inbound Delivery still has HU's assigned and hence cannot be deleted ' .
In order to delete these HU assignments we have implemented sap note 1083602 and 1252930 .
But the error HUDIALOG 038 is ignored by note 1252930 when HU lean status update with non-unique HU numbering (TVSHP-SPE_LEAN_HUSTAT) is set in the system but since our system has the unique ID active as shown above, this error is not ignored and we are not able to proceed any further.
Please help me out if anyone had faced such issue earlier.
Thanks in Advance.
Edited by: Appyfizz on Mar 15, 2011 10:45 AM

Check whether the following notes helps you
1)  Note 435904 - Not possible to assign HU to posting change inbound delivery
2)  Note 1245960 - Lean Status Update- Using COWBPACK to create HU not possible
thanks
G. Lakshmipathi

Similar Messages

  • Error Message AM057 while deleting contact person

    Hi,
    Recently, our company consolidated the SAP platforms for two regions and it is single instance now. The data is migrated to the new system by SLO. After this we are facing an issue while deleting the contact person in customer master. When we select the contact person and delete, we get a message saying "Specify a valid person use (PERSON_REFERENCE)". When we press enter, another entry (above the intended entry) gets deleted.
    The performance assistant shows nothing but message no. AM057.
    Based on the couple of OSS notes I have searched, I checked the table ADRVP entries and found two entries for that contact person. Both entries have the client number appearing in the field APPL_KEY.
    The first record is having old client number and the second record is having the new client number. I presume, we are seeing two records because the data was migrated by SLO. But what is confusing is, both are having same addr.no. and marked as X for Owner (Flag: Adress owner object reference).
    Data in table ADRVP looks as under.
    Cl.     Person            Seq. No.      Table      Field           Application table key      pers.addr. Key      Addr. no.            Owner
    300   0200591046          1            KNVK     PRSNR      2000000093060             BP                         0200026699       X
    300   0200591046   45333695     KNVK     PRSNR      3000007093060             BP                         0200026699       X
    Can there be more than one entry with same addr. no. in table ADRVP for the same person number? Can someone share what is wrong with deleting the contact person in customer master?
    Thanks,
    Balaji

    Dear Balaji
    You have asked same question In Different places
    Re: Error Message AM057 while deleting contact person in customer master

  • Error Message AM057 while deleting contact person in customer master

    Hi,
    Recently, our company consolidated the SAP platforms for two regions and it is single instance now. The data is migrated to the new system by SLO. After this we are facing an issue while deleting the contact person in customer master. When we select the contact person and delete, we get a message saying "Specify a valid person use (PERSON_REFERENCE)". When we press enter, another entry (above the intended entry) gets deleted.
    The performance assistant shows nothing but message no. AM057.
    Based on the couple of OSS notes I have searched, I checked the table ADRVP entries and found two entries for that contact person. Both entries have the client number appearing in the field APPL_KEY.
    The first record is having old client number and the second record is having the new client number. I presume, we are seeing two records because the data was migrated by SLO. But what is confusing is, both are having same addr.no. and marked as X for Owner (Flag: Adress owner object reference).
    Data in table ADRVP looks as under.
    Cl.     Person            Seq. No.      Table      Field           Application table key      pers.addr. Key      Addr. no.            Owner
    300   0200591046          1            KNVK     PRSNR      2000000093060             BP                         0200026699       X
    300   0200591046   45333695     KNVK     PRSNR      3000007093060             BP                         0200026699       X
    Can there be more than one entry with same addr. no. in table ADRVP for the same person number? Can someone share what is wrong with deleting the contact person in customer master?
    Thanks,
    Balaji

    Balaji Srinivasan wrote:
    Based on the couple of OSS notes I have searched,
    You should share the OSS note which you got from market place.
    Have you checked this note Note 445825 - Error message AM057 when deleting a contact person ?
    It has the reason and solution.

  • Error In ESH_COCKPIT while deleting Search Connectors ?

    Hi ,
    When I am starting the transaction ESH_COCKPIT and then trying to delete the search connectors created for HRTMC*
    it is giving an error
    "Software component EA-HRGXX has been locked by user <username>"
    Although I have deleted all the enteries in SM12 for my user , The error is occuring for any user who logs and tries to delete the search connectors .Hence I am unable to delete the connectors also when I am trying to create new connectors it is giving the same error.
    Kindly help me here !
    Regards,
    Soumya

    Hi Soumya,
    Try these SAP notes:
    1541984 - Search connectors are not found
    1542741 - Deleting connections
    If these don't work let us know.
    Best regards,
    Luke

  • E66 - Error code 300 while installing an app via O...

    Hey,
    I've got Ovi Suite 3.1.1.75 and I'm trying to install MapMyTracks app (http://www.mapmytracks.com/download/) on E66. I installed a signed version, but somehow it was seen on the phone as an unsigned one. So I removed it and tried to install it directly via the phone (http://www.mapmytracks.com/install) but I got an error ("Installaton failed" or something like that). So I tried to install it again via Ovi Suite, but now Im getting error code 300.
    Any idea what's wrong?

    Ok, so there's now actually 3 people that have taken the trouble to report the error 300 issue to this forum. How many more are out there that do not report this? (and buy samsung the next time) C'mon Nokia, show you really care! I still can't use my phone on the internet...

  • Error-12017 eapered while updating nokia E63 via O...

    I have OVI Shuite ver-3.1.1.90, the latest version in nokia website, installed in windows Xp sp-3. I have received 12017 error msg, while updating the my nokia e63 mobile. After that, I uninstalled 2 times and again reinstalled ovi suite, but till now the same error msg eppared... Please, tell me what was its solution?
    S.Chand

    Welcome to the Forum and sorry about the poroblem ..
    Follow suggestions as listed in this resource .. If nothing works you need to visit Nokia care ...

  • Error Message MEPO834 while deleting a PO item

    Hi,
    I did not find what is this error message in SE91 transaction. Can some one tell ?
    Regards,
    Sattuj

    Hi
    MEPO834--Address '&1' in field EKPO-ADRN2 does not exist
    please find the below path to check the message
    SPRO>IMG->Material management->Purchasing->Environment data--->Define Attributes of system message
    Regards
    Damu

  • Getting error F5 080 while saving Goods Receipt in VL32N

    Hello all,
    A user has created an Intercompany Purchase Order (i.e. The vendor is
    an Intercompany).
    The vendor mentioned in that PO has different partners for presenting
    invoice (i.e. Partner Function PI) and for suppliing goods (i.e.
    Partner Function GS).
    The trading partners of those PI and GS vendors are different e.g.7000
    and 8000 respectively.
    Later on user has done Inb. Delivery by VL31N and posted invoice (Here
    the goods receipt is based on Invoice).
    And then, when he tries to post Goods receipt by VL32N it gives him
    error "Consolidated companies 7000 and 8000 are different.
    However user was able to save Goods receipt for another similar PO
    which has same PO Doc.Type, same vendor, material and same Org. Data
    also.
    Please help us to resolve this problem.
    Thanks in advance.
    Amit

    Hi Srinivas,
    Thank you very much for the reply.
    But that SAP Note refers to error during Invoice creation. However in this case the error occurs during VL32N Goods receipt.
    Also another thing is that when we replicated documents in Quality system, it is not giving error but gives error to user in Production system.
    Thanks in advance for helping us,
    Best Regards,
    Amit

  • Error while saving a workflow via sharepoint designer: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.

    While saving a workflow using SharePoint designer on a SharePoint site, I get the following error: 
    Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
    Steps to recreate error:
    Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
    Access the list using SharePoint Designer 2013, in the workflow section, click new workflow. 
    In the new workflow dialog, enter workflow details, click save (see screenshot below).
    Error message is displayed as below:
    After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
    Workaround
    When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
    Notes
    Workflow Manager 1.0 is installed.
    The site has been registered with Workflow manager using Register-SPWorkflowService
    cmdlet.
    Any clue on why is this happening?

    Hi Vivek,
    Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
    <user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
    <user profile>\appdata\local\microsoft\websitecache\<sitename>
    http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
    Thanks
    We are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error while deleting values of characteristic /1FB/COMPANY/Company (RFC des

    Dear all,
    I am trying to synchronize Company master data between local BCS system and SAP BW with UGMD_BATCH_SYNC program. In the synchronization mode, Full Synschronization (Write and Delete) was selected.
    However, I receive the following error message when executing the program:
    Error while deleting values of characteristic /1FB/COMPANY/Company (RFC destination )
    Message no. UGMD077
    Diagnosis
    When writing or deleting values of characteristic /1FB/COMPANY/Company errors occurred in the system with RFC destination . As the changes have already been defined in the local storage location this results in the master data being asynchronous between the local and remote storage location.
    System Response
    Processing is continued.
    Procedure
    Carry out a manual synchronization of the master data later using report UGMD_BATCH_SYNC. You can find additional information there under Application Help.
    FYI, RFC Destination for my data basis is left blank.
    What may causes this error and how to resolve it?
    Thank you.

    Hi MontyBurns,
    May I know what settings that I need to check in UGMDSYNC program? As far as I can tell, there is only one parameter that we need to specify in the program i.e. Field Name. As I am trying to synchronize from BCS to BW, I have chosen the followings settings:
    Source = LOCAL
    Target = ALLBW
    All,
    Interesting thing that I notice after executing the UGMDSYNC program is the following message:
    Synchronize/Display Variances Between Systems
         The compound dependencies for the attributes or texts are not defined
         uniformly in the systems investigated.
         Example:
         Texts are defined as language-specific in the local systems and as
         language-independent in remote systems (for example BW systems). The
         same can apply for other compounds such as version or time dependencies.
    System Response
         The display of differences between the systems will be affected. A
         manual synchronization will not be completely successful.
    Procedure
         1.  Ensure that the dependencies for the attributes and texts are the
             same in all systems.
         2.  Start the synchronization process again.
    Procedure for System Administration
    I can check the attributes and texts in BW via RSD1 by specifying InfoObject = 0COMPANY and checking the Master data/texts and Attribute tabs. But how do I check similar settings in BCS Workbench? I can't determine whether the Company text is language-dependent or not simply by displaying specific Company from Process View > Master Data > Consolidation Units > Company.
    Thanks.

  • Error while deleting a mapping

    Hi all,
    I am getting the following error while deleting a mapping. My client version is 10.2.0.4.36
    API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
    oracle.wh.util.Assert: API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
         at oracle.wh.util.Assert.owbAssert(Assert.java:51)
         at oracle.wh.ui.jcommon.OutputConfigure.showMsg(OutputConfigure.java:216)
         at oracle.wh.ui.common.CommonUtils.error(CommonUtils.java:370)
         at oracle.wh.ui.common.WhDeletion.doActualDel(WhDeletion.java:512)
         at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:203)
         at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:283)
         at oracle.wh.ui.jcommon.tree.WhTree.deleteItem(WhTree.java:346)
         at oracle.wh.ui.console.commands.DeleteCmd.performAction(DeleteCmd.java:50)
         at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    Thanks in advance!
    Sebastian

    These type of Internal Errors are all too common in OWB and it's difficult to diagnose the exact problem.
    I'd suggest closing the Design Centre, going back in and trying to delete it again, this will often resolve Internal errors.
    There's also an article on Metalink Doc ID: 460411.1 about errors when deleting mappings but it's specific to an ACLContainer error, so may or may not be of use.
    One of the suggestions is to connect as the Repository Owner rather than a User and try to delete the mapping.
    Cheers
    Si
    Edited by: ScoobySi on Sep 10, 2009 11:44 AM

  • Error while deleting sub contracting delievry

    Hi ,
    While deleting subcontacting delivery i am getting error "chnage restricted shipment cost for shipment ***** are calculated,
    Can some body give solution step step to delete subcontacting delivery
    Thanks

    Based on the message you have, you have shipment cost documents activated.  As a result of that, in order ot back things out you need to follow the process through and reverse the shipment cost document if you have one associated to this delivery / shipment process.   Look in your doc flow and see if you have have a shipment cost doc associated to the shipment, if you do, back it out.  As mentioned earlier, without the exact message and the process flow (docs), it is hard to understand specifically what you are looking for.  Please provide more detail if you want assitance.
    Kind Regards,
    Jason

  • Error while deleting DC from client

    In NetWeaver Developer Studio, while i try to remove a Development Component from Client using Delete option, I get the following error. I have synched the DC, built it and deployed + ran it once. However, there are no open activities. This happens for some DCs sometimes, but not always. Any help/inputs/suggestions will be appreciated.
    Thanks in advance.
    Here are the error details
    <i><i>Error: Action failed.
    Problems encountered while deleting resources.
    org.eclipse.core.internal.resources.ResourceException: Problems encountered while deleting resources.
         at org.eclipse.core.internal.resources.Resource.delete(Resource.java:656)
         at org.eclipse.core.internal.resources.Project.delete(Project.java:288)
         at com.sap.ide.eclipse.component.provider.actions.dcproject.DeleteProjectActionImpl.run(DeleteProjectActionImpl.java:80)
         at com.sap.ide.eclipse.component.provider.actions.dc.AbstractDcMultiAction$1.run(AbstractDcMultiAction.java:127)
         at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
         at com.sap.ide.eclipse.component.provider.actions.dc.AbstractDcMultiAction.run(AbstractDcMultiAction.java:93)
         at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:229)
         at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
         at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1391)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
         at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
         at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
         at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
         at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
         at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
         at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:286)
         at com.sap.ide.eclipse.startup.Main.run(Main.java:795)</i></i>

    Do you really mean "Delete DC" or do you mean "Remove from client"?
    A Remove from client just removes the DC from your local system, while a Delete DC removes the DC from the DTR!
    In case you really want to delete the DC from the DTR, try just syncing the sources <b>without</b> performing a build.

  • Error while deleting the confirmation- Reason has to be entered for 102

    Hi,
    When i try to delete the confirmation for Goods, an error -"A reason has to be entered for movement type 102" is occuring. I have maintained the reason for rejection in the document tab at the line item level while deleting the confirmation.The reason for movement field is mandatory in R/3 system for movement type 102. I have maintained this reason for rejection that has maintained in the R/3 system in the SRM config and able to select that during deletion of confirmation, but still i am getting this error. Please suggest.
    Regards
    GGL

    sorry for the very late reply..
    Note 1345896 - Error due to reason for movement when deleting the GR in EBP
    When we try to delete a goods confirmation with the Reason for Rejection text in SRM, we get the error "A reason has to be entered for movement type 102" (M7 325) thrown from the backend R/3 system.
    Other terms
    M7 325, RREJ, Reason for Rejection, MOVE_REAS, c_subtype_ca, LBBP_CFF60, FORM mapping_gr_for_backend.
    Reason and Prerequisites
    This is caused by a program error
    it helps aothers too

  • Error While Deleting cube Contents in Process Chain

    Hi All ,
       I am getting a error when i am trying to delete the contents of two cubes in a Process Chain . The data of one cube is getting successfully deleted but while deleting the second one it results in a error.
    Following are the messages :
    1>Database table /BIC/FZCFEXP01 was deleted and recreated     
    2>Database table /BIC/EZCFEXP01 was deleted and recreated     
    3>Database table /BIC/FZCFEXP02 was deleted and recreated     
    4>Database table /BIC/EZCFEXP02 was deleted and recreated     
    5>Content Of Data Target ZCFEXP01 Successfully Deleted     
    6>Content Of Data Target ZCFEXP01 Successfully Deleted     
    7>System error: RSDU_DATA_EXISTS_TABLE_DB6/ DB6     
    8>Drop Cube Failed In Data Target ZCFEXP02
    Can anyone Help ??
    Sam
    Any pointers . Help is highly appreciated.
    Edited by: Samir Bihari on May 14, 2009 8:54 AM
    Edited by: Samir Bihari on May 14, 2009 8:55 AM

    Hi,
    I'm not sure for this issue but it may relate to SP issue...
    jst chk this notes:
    Note 385293
    Note 987754
    rgds,

Maybe you are looking for