Error:I am the PlaceHolder control

Hi,
    The IE displays the form correctly, but when we actually take the print out, I see error
Error:I am the PlaceHolder control.
This is happening to one particular user.
Thanks

Venkata,
Check this thread and see if it helps.
Adobe Form does not display "I am the placeholder control" displays instead
Chintan

Similar Messages

  • "An error occured saving the ActiveX control"

    I pulled up an old LabVIEW program today
    that I used to work on under Win-NT.
    Now I use Win-XP.
    We're talking about LabVIEW 5.1.1 on this program.
    The program suddenly throws
    "An error occured saving the ActiveX control"
    when I try to save the program.
    Never saw this under NT.
    Anybody knows what this is about ?
    Martin

    Thanks for posting but we need more information.
    Do you have activeX controls in the VI? Are you using 3d graphs? Does the VI run on XP? What version of LabVIEW do you have?

  • "an error occurred saving the activex control"

    I'm trying to compile an executable in Labview 5.1. When I run the build app, it gets about half way done then pops up the error:
    "an error occurred saving the activex control"
    After clearing the error message, it proceeds to go through the motions of compling the app, but no exe is generated.
    The design mode progam run operates fine, and it saves fine as well in design mode.
    Thanks!

    wawatts,
    Though Brian and I got a broken arrow because we didn't have the necessary ActiveX component installed, I imagine you get no errors on the development system because you do have the component.
    This problem would be much harder to pin down on your side given the lack of development-environment errors and the sprawling design of the main VI. One possible troubleshooting approach would be the LabVIEW Find functionality (Edit >> Find). ActiveX functionality typically involves the use of Property Nodes and Invoke Nodes, so if you search for any Invoke Nodes (Select Object, then Functions >> Communication >> ActiveX >> Invoke Node) in the scope of your main VI and its subVIs, you could perhaps have turned up some hits that take you to the subVI that has the control that is presumably causing the problem.
    Unfortunately, I fear that finding the problem area doesn't solve the problem. It seems to me that either the LabVIEW app builder or the ActiveX component is doing something unexpected or nonstandard that is leading to the error message.
    I'm going to stick to my "upgrade the software as much as possible" guns:
    1. Install the LabVIEW 5.1.1 patch I linked to above, if it isn't already installed. There were fixes to the development environment and changes to the app builder that might resolve your problem. This is a free patch.
    2. Consider upgrading the ActiveX control. I think that the latest version is called IntuiLink for 54600-series Oscilloscopes, Version 3.1, and it's available here on the Agilent site.
    It was easy to do a simple test using your Xezgetsetup.vi on my system (LabVIEW 7.1.1, XP) with the updated ActiveX control. First, I installed the Agilent software. Then, I right-clicked inside the ActiveX control on the front panel of Xezgetsetup.vi, chose Insert ActiveX Object, and selected Agilent 54600 Scope Control from the list. Then I had to go to the block diagram and relink a few of the property and invoke nodes by just left-clicking on broken nodes and re-selecting the items that your code was already displaying. That fixed the VI so that it would run again.
    Then I built that VI into an EXE and got no errors.
    Perhaps all this proves is that you would have clear sailing if you upgraded to LabVIEW 7.1 and got the most recent Agilent ActiveX control--and maybe this is a good reason to bite the bullet and do that upgrade now--but it's certainly possible that you can do the same thing in 5.1 and solve your problem. Worth a shot.
    Hope that helps,
    John

  • Adobe Form does not display "I am the placeholder control" displays instead

    We are trying to display an Adobe interactive form in IE browser.  Instead of the form, the message "I Am The Placeholder Control"  displays where the form should be.  Any thoughts on the cause of this??  Active X settings have been checked and the PC has been used to display Adobe Interactive forms before.

    Hey David,
    I am also in a similar boat. Having installed and configured the TrustCertificate, i still get a blank for where my sample form should be displayed.
    There are a number of things that need to be done for the Adobe document services to work.
    This weblog outlines some
    /people/achim.hauck/blog/2005/02/04/my-struggles-with-the-adobe-document-services-in-was640
    It is "My struggles with the Adobe Document Services in WAS6.40" by Achim Hauck.
    Hope it helps.
    Sumit.

  • WidgetBrowser installation fail with error code 7 (The storage control blocks were destroyed.)

    Client machine is Windows 7 x64.
    I am using AdobeApplicationManager tool to extract sources from original Set-up.exe.
    Extracted sources contain Build and Exceptions folder. The Build directory contain Dreamweaver.msi and Exceptions contains AdobeHelp and WidgetBrowser sources.
    After silent installation of Dreamweaver.msi, i'm tried to install WidgetBrowser but it return error code 7(The storage control blocks were destroyed).
    I tried on different windows 7 x64 client but still its not working.
    Please help.

    Hi,
    I have the exact same problem, except I am using 32-bit Windows 7. 
    Thanks
    Rosy_55

  • Exchange2013 preparead error: "length of the access control list exceed the allowed maximum"

    Hi,
    when when preparing ad (2008) for exchange 2013 installation, I get this error "length of the access control list exceed the allowed maximum"
    after some searh I found this solution on http://support.microsoft.com/kb/973848/en-us
    which consists on the following steps:
    Click Start, click Run, type ldp, and then click OK.
    In the LDP console, click the Connection menu, click Connect, type domain controller name, and then click OK.
    On the Connection menu, click Bind, type the credentials of the domain administrator, and then click OK.
    On the View menu, click Tree.
    In BaseDN drop-down list, select the appropriate domain context, such as "DC=Contoso,DC=com," and then click OK.
    In the tree view, under DC=<var><domainname></var>,DC=com, locate to the object "CN=Microsoft Exchange System objects,DC=<var><domainname></var>,DC=com".
    Right-click the object in step 6, click Advanced, select Security Descriptor, make sure that the SACL option and the "Text dump" option are
    unchecked and then click OK. 
    This will open a new window with security descriptor details
    In this security descriptor Window, click to select the DACL check box.
    In the middle pane of the Security descriptor Window, select and delete all the access control entries (ACEs) that have “\0ADEL:” in the Trustee column. Multiple ACEs can be selected and then click Delete
    ACE to delete them.
    Close the security descriptor as soon as you delete the corresponding ACE's
    Close the LDP console.
    Force Domain Controller replication.
    Rerun Exchange setup and it will install successfully
    But I didn't find the object ""CN=Microsoft Exchange System objects" since I've removed it before the preparation!!!
    Can anyone help please to solve this issue??
    Thanks

    Hi,
    Please make sure all the access control entries (ACEs) that have “\0ADEL:” in the Trustee column have been deleted in the 'Microsoft Exchange security objects' OU. Also make sure the permissions are not inherited by the root domain
    so go to properties of the domain.com, If there are any unknown accounts listed in ACLs, remove all of them.
    Then follow your original posting of step 10 to 13 to rerun Exchange setup to have a try.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Error while Adding the PlaceHolder to Home Page using Jdev,UCM

    Hi,
    I am Using UCM and Jdev 11g.
    I was creating a website using Oracle® Fusion Middleware Developer's Guide for Site Studio for External Applications
    11g Release 1 (11.1.1).
    I worked fine till creating the place Holder Definition , I was trying to add place holder to Home Page.
    In this step I did not get the property 'Switch Placeholder Definition Role' in the List when exploring the node WebSite.
    Plaese help me resolve this.

    Hi chris,
    Thank you for your response.
    I am using oracle db. It seems that it is trying to insert record into L10_Locale table while portlet is added into home page. Does the record go to L10_LOCALE while adding portlet.
    As per my knowledge, records goes to desktop,page and placement related tables while portlet is added.
    When i see the L10_LOCALE existing records, it has two 2 records.
    Encoding Language Country
    UTF-8 en US
    UTF-8 en
    you said that Locale for the title or description is too long... Is it for Portlet's title of locale ...?
    Then, what is the relation of title and this error ...
    Please clarify this ...?
    Regards,
    Senthil

  • Why do I get this error when running the PID Control-Single Channel.vi: "Requested value is not a supported value for this property."

    Error -200077 occurred at Property Node DAQmx Timing (arg 3) in DAQmx Timing (Sample Clock).vi:1->PID Control-Single Channel.vi
    Requested value is not a supported value for this property.
    Property: SampQuant.SampMode
    You Have Requested: Hardware Timed Single Point
    You Can Select: Finite Samples, Continuous Samples
    Author: Pcorcs
    Attachments:
    PID Control-Single Channel.vi ‏53 KB

    Actually I have already tried a few things you suggested and got as far as the DAQmx Write vi. The error at the DAQmx was a buffer error indicating i needed to set it to 2 instead of the default of 1. Tried using the DAQmx Input and Output Buffer vi to change buffer, with no luck.
    Attachments:
    PID Control-Single Channel.vi ‏53 KB

  • Error with "on-the-fly" controls in waveform generation

    I am trying to output a waveform in which I can change amplitude while the VI is running. When trying to do so, however, I am allowed to change the amplitude only once, and then I get error #-10880. What does this mean? I am using AO Write, and placing the waveform calculation and generation inside a sequence structure, with a wait statement, in the hopes of giving "changes enough time to take place".
    Thank you.

    jmarotta wrote in message news:<[email protected]>...
    > I am trying to output a waveform in which I can change amplitude while
    > the VI is running. When trying to do so, however, I am allowed to
    > change the amplitude only once, and then I get error #-10880. What
    > does this mean? I am using AO Write, and placing the waveform
    > calculation and generation inside a sequence structure, with a wait
    > statement, in the hopes of giving "changes enough time to take place".
    > Thank you.
    Hi, Jmarotta,
    I am not very sure how to solve your problem, but the error #-10880 is
    "updateRateChangeError A change to the update rate is not possible at
    this time because when waveform generation is in progress, you cannot
    change th
    e interval timebase, or when you make several changes in a
    row, you must give each change enough time to take effect before
    requesting further changes."
    You can find this in the help/error code/Data Acquisition Vis... Hope
    this would help. ^_^
    Regards,
    celery

  • Error Message at the Database Control homepage

    Hi forum,
    After I have successfully installed and configured my database 11g EE I logged on to the log on page. I entered the username as SYSMAN and the password.
    On the Database homepage is the following error message displayed:
    Error:
    Internal Error has occurred. Check the log file for details.
    Only the following tabs links are found on the page:
    Database |Setup |Preferences |Help |Logout
    I cannot access anyting else. What should I go next?
    I shall be grateful if anyone could help me
    Regard,
    Godis-Tei

    WOW!
    This is the sixth thread on same problem since 20 August
    https://forums.oracle.com/people/Godis-Tei/content
    >After I have successfully installed and configured my database 11g EE
    how do  we know above is true?
    what is OS name & version?
    How do I ask a question on the forums?
    https://forums.oracle.com/message/9362002#9362002

  • What is the cause of a -10401 error on the counter control if it's been working for weeks?

    I'm using LabVIEW 6.0, a NI 6025E board, and I'm receiving an error -10401 on the Counter Control. The software was running fine until I changed some non-counter VI's. Now it seems to work intermittently. I have configured the board with M&A Explorer and believe I have the correct drivers. I'm running under Win98.

    Nick,
    I would recommend testing your counters in MAX using Test panels to help narrow the issue. Next I would then try and run one of the examples in LabVIEW that is doing the same counter operation you are performing in your application for example, simple event counting. Find out if you are still getting the same error. This will narrow in on where the error is occuring and why.

  • The ActiveX control cannot be instatiated --VC++

    When I try to insert any Javabean ActiveX control in VC++ resource dialog(design time).. I get the following error..
    "The ActiveX control cannot be instatiated"..
    If I create it at runtime..It does not get painted..
    if I resize my application my control appears and then disappears
    If I try in Visual basic.. I am able to insert the control
    and run.. but it crashes at the very end..
    Any ideas

    I have also had painting problems when embedding a ActiveX'ed Java bean into
    a VC++ application. I think what we did was a transparent background. For some
    reason the background from the VC++ application painted over the ActiveX'ed bean.
    I cannot remember all the details now, but it was definitely a problem with the background
    from VC++.
    Sylvia

  • The 'Access-Control-Allow-Origin' header contains multiple values '*, *', but only one is allowed. Origin 'null' is therefore not allowed access.

    Hello. I added custom http response headers to my SP site web config file as follows: 
    <httpProtocol>
          <customHeaders>
                 <add name="Access-Control-Allow-Methods" value="POST,GET,OPTIONS" />
          <add name="Access-Control-Allow-Origin" value="*" />
          <add name="Access-Control-Allow-Headers" value="Content-Type,Authorization" />
          </customHeaders>
        </httpProtocol>
    When I try to call any web service, i get these headers two times each: 
    HTTP/1.1 200 OK
    Cache-Control: private, max-age=0
    Transfer-Encoding: chunked
    Content-Type: application/atom+xml;type=entry;charset=utf-8
    Expires: Sat, 01 Mar 2014 19:11:37 GMT
    Last-Modified: Sun, 16 Mar 2014 19:11:37 GMT
    ETag: "3"
    X-SharePointHealthScore: 0
    SPClientServiceRequestDuration: 20
    SPRequestGuid: b4e77d9c-bfc3-a050-493a-ca5d251d1a72
    request-id: b4e77d9c-bfc3-a050-493a-ca5d251d1a72
    X-FRAME-OPTIONS: SAMEORIGIN
    Persistent-Auth: true
    Access-Control-Allow-Methods: POST,GET,OPTIONS
    Access-Control-Allow-Origin: *
    Access-Control-Allow-Headers: Content-Type,Authorization
    X-AspNet-Version: 4.0.30319
    X-Powered-By: ASP.NET
    Access-Control-Allow-Methods: POST,GET,OPTIONS
    Access-Control-Allow-Origin: *
    Access-Control-Allow-Headers: Content-Type,Authorization
    MicrosoftSharePointTeamServices: 15.0.0.4569
    Date: Sun, 16 Mar 2014 19:11:37 GMT
    and that gives me error from ajax: The 'Access-Control-Allow-Origin'
    header contains multiple values '*, *', but only one is allowed. Origin 'null' is therefore not allowed access.
    The 'Access-Control-Allow-Origin' header contains multiple values '*, *', but only one is allowed.
     Origin 'null' is therefore not allowed access.
    Any idea???

    Hi Ann,
    Please check whether there are duplicate custom headers in your code.
    Similar issue for your reference:
    http://social.msdn.microsoft.com/Forums/office/en-US/b79b75f4-b46b-46ae-ae29-17a352b6b90b/custom-http-response-headers-for-sp-2013-shown-2-times?forum=sharepointdevelopment 
    Regards,
    Rebecca Tu
    TechNet Community Support

  • When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

    When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

  • Error while invoking the commit operation in a data control

    JDeveloper 11.1.2
    When we invoke the commit operation exposed thru the data control, sometimes we get the following error:
    Caused by: java.lang.NullPointerException
    at oracle.jbo.server.DBTransactionImpl.addPendingEvent(DBTransactionImpl.java:5751)
    at oracle.jbo.server.DBTransactionImpl.sendOrQueueEventForSharedTrans(DBTransactionImpl.java:6659)
    at oracle.jbo.server.DBTransactionImpl.fireTransactionStateEvent(DBTransactionImpl.java:6693)
    at oracle.jbo.server.DBTransactionImpl.doAfterCommit(DBTransactionImpl.java:2301)
    at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2159)
    at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2352)
    This issue is intermittent but occurs many times.
    I am NOT able to find any issues with the code.
    Any pointers on resolving the issue.
    Thanks,
    Navaneeth

    My problem is special, we change the AM configuration to EJB (2.1 stateful, let's put performance issue aside) and deploy remotely, however, there's a NullPointerException occurred at the same line number as your case when we change the task flow id of the dynamic region, because the ADF framework always calls Rollback during region refresh, this Rollback cause the NullPointerException. Even if I caught and ignore this error, there will be always a NullPointerException thrown the next time we do any VO attribute update (kind of same as the blog entry described below).
    http://adfbugs.blogspot.com/2011/08/rollback-is-executed-when-region-is.html
    I am not sure if we could benefit from fixing of your SR by Oracle. Please share if you have any hints, thank you!
    Edited by: codeplay on Mar 30, 2012 9:42 AM

Maybe you are looking for