Error I get when iPod Nano 3rd Gen is plugged into iTunes: The disk was not ejected properly. If possible, always eject a disk before unplugging it or turning it off.

I have an iPod Nano 3rd Generation (2007), and When I plug the USB in and all that, the Apple logo appears then goes to menu quickly, then to a "Connected" screen, and it shows up in iTunes for about 5 seocnds before I get this error:
"The disk was not ejected properly. If possible, always eject a disk before unplugging it or turning it off."
.....I have no idea what to do, so help! please

have you tried using the Restore option in iTunes to reset the entire iPod?

Similar Messages

My iPod nano 3rd gen went mad then all the songs were gone can I get them back

My iPod nano 3rd gen wiped all my music can I recover it

If it's no longer in iTunes or stored in a backup anywhere, I"m afraid you are out of luck.
For music purchased in iTunes, you can redownload it again no cost via iCloud if you live in a country where this service has gone live. See this article for more details.
http://support.apple.com/kb/ht2519
As for music imported from outside of iTunes, you'll need to rerip those into iTunes if at all possible.
B-rock

My ipod nano 4th generation will plug into itunes and if i push buttons i can hear music, however the whole time the screen is black so its a guessing game. how do i fix this?

my 4th generation ipod nano works but its a guessing game. the screen is totally black even when plugged into my computer. itunes still recognizes it. is the screen broke is it the backlight, any suggestions how to find out or to fix this? oh and ive completely restored the ipod several times. i let someone borrow it and this is how i got it back so i dont know what caused the problem.
Message was edited by: robynd369

I checked for anything either bent or broken, and as far as I know everything looks fine, though I could probably clean out the dust and dirt collected in there after a year. I could take a picture if that would help. Would being dirty inside there cause this to happen? It's one thing I guess I never thought of and probably should do.

Unknown error (-39) = cannot sync iPod Nano 3rd gen.

Hi There,
Got an Imac G5 PPC with OS 10.5.2 and the latest version of iTunes and so.
I use 2 nike plus kits (my wife and myself) on 1 iPod and 1 Imac.
Each time when synching I get error (-39). Anybody familiar with error-numbers as -39? Inspite I have space free on my iPod I cannot my my contacts synched. I have resetted multiple times.
Who can help me out?

Howdy Andrea.Betti,
Thanks for using the Apple Support Communities.
In order to resolve this issue where you're not seeing the iPod in iTunes, please follow the steps in the article below.
If you don't see your connected device in iTunes for Mac - Apple Support
Have a good one,
Alex H.

Ipod nano 3rd gen. video download question

Hi All,
I tried adding a movie video to my ipod nano (3rd gen) and it took up the space when I synced it but when I ejected and went to find it on my ipod it wasn't there. There was no video file to find but the space was indeed used. My husband has a Ipod classic and the same movie synced onto his ipod and my daughter has the ipod nano 4th gen and she was able to view movie also. Is the 3rd Gen nano not video compatible? Thanks in advance for your help in this matter.

It's as compatible as the 4G version; I think you just had bad luck. If you can't find & delete the (large) file, you'll have restore and start over.

Driver for Ipod Nano 3rd Gen

Hi
Just brought Ipod nano 3rd gen and plugged it into PC. It is not able to install properly - computer says it can't find driver. Any ideas how to resolve this?

I am having the same issue here.
OS: Vista ultimate 64-bit
iTunes: 7.6.0.29 (64-bit)
iPod: Nano 8gb 3rd gen
I currently have a 60gb iPod Photo that works flawlessly. I bought the Nano tonight, brought it home, and charged it up. Plugged it in, and now Windows Vista is asking for drivers for the Nano. Doesn't recognize the Nano at all.
The Nano knows it's plugged in, and is giving me the "eject before disconnecting" screen. However, Vista wants drivers, and iTunes doesn't recognize the Nano is connected whatsoever.
Can someone please shed some light on this for us? Thanks.
[edit] Yes, I have reset the Nano. Yes, I have uninstalled iTunes, rebooted and re-installed iTunes. Yes, I also tried putting the Nano into Disk Mode manually and connecting it to the system, but the system still wants drivers....
[edit2]And yes, I'm using the administrator account on the system, too.

My ipod nano 3rd gen gets error code -9459 when I try to convert a video in Itunes

I'm tring to convert video from Youtube to play on my ipod nano 3rd gen. When i go to itunes and Advanced and set it to convert for ipod it goes on for quite a while then about 3/4 way done I get error message Erroe occurred converting file "teapot 1". An unknown error (-9459)
What do I do? I tried Real player converter too - no luck.

I'm not sure about the error message, but it might just be easier to use an application such as Handbrake or MPEG Streamclip to create an iPod compatible version of the video.
B-rock

IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My PC Shuts Down When I Plug In My New IPod Nano 3rd Gen.

The title of this post pretty much says it all. Got me my new iPod Nano 3rd gen. yesterday. Brought it home, booted up the puter, loaded iTunes and plugged that sucker in. Well first iTunes kindly instructed me that I would have to download it's newest software, which I did.
Then soon afterwards when I thought i was set, I plugged in my new 3rd gen iPod Nano to the pc and as soon as I did that my pc shut down completely, and restarted. Shut down is putting it mildly, I mean it just went 'kablink" and then was restarting.
I tried uninstalling iTunes, cleaning my temp folder, my internet cache, then reinstalling iTunes anew, still nada. All to no avail, people, because each and everytime I plug in my new iPod Nano, no sooner than i do this my pc summarily goes "kablink" on me and starts booting up again.
NOW I STILL have my iPod Nano 2nd gen, and it works fine, even with the newest iTunes software, it doesn't screw up my pc like the new 3rd gen iPod Nano does.
Now I am to conclude that the problem lies in the 3rd gen iPod itself. How could it not? My iPod Nano 2nd gen works absolutely fine, and everytime I plug in my new iPod Nano, I shut down in a flash withtout fail. Anyone of you have this error? I would love to know short of calling iTunes tech support about what to do about this, this is a MAJOR bummer for sure. Now I have to be concerened about whether or not I am ever going to get this thing to work now.
Is the iPod broken? If not why the shutdowns then? Please advise. Many thanks in advance.

Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

Ipod nano 3rd Gen not recognized by itunes or windows 7

USB device not recognized.
things I have done
put Ipod in disk mode still didn't recognized
My Ipod Classic 6th Gen works fine
It shows 3 Mass Storage Device
when I plug in Ipod nano 3rd gen it shows unknow device
have deleted Mass storage devices and Apple Moble Devices
unpluged computer from wall
nothing solving problem
I also tried it on my laptop its not being recognized
my wife Ipod nano is doing the same thing as mine
its got to be the software download from itunes because it has worked on all previous versions.

I have the same problem. My Iphone 4s works fine when docked to PC. PC won't recognize my 3rd Gen Nano. Same goes for my Work PC. They don't recognize it nor will plugging it in to a PC charge it. I have to plug it into wall socket to charge.
I have tried resetting, I have tried downloading newest Itunes.
Must be the Nano itself if it doesn't get recognized by mutliple PCs?
I haven't used the Nano for probably 2 months. Previously it worked fine...
One thing, when docked to my laptop during a reboot/startup, it intially starts to charge the Nano, but once setup is finished it doesn't recognize it any longer...

Vertical line on my ipod nano 3rd gen?

Yesterday my ipod was fine, last night i added some songs to it and then after when I was listening to music i noticed a very tiny vertical line up top above the title of the song playing.. it didn't look too out of place so i thought maybe i'd just never noticed it before.. but then this morning when i get up theres a line from top to bottom.. and i can't find support or topics about this (on an ipod nano 3rd gen) anywhere.. so far its playing the music but.. it doesn't seem right so i'm not sure if anyone else has had this? or what i should do? please help!

http://www.apple.com/support/ipod/five_rs/nano3gen/#

My iPod nano 3rd gen is stuck in a restore loop.

My iPod nano 3rd gen is stuck in a restore loop. I have wiped it with Disc Utility and attempted to restore with iTunes, but there was no effect. I checked it in diagnostic mode against an identical pod and found no significant differences in the results, both checked out fine. I know that this is not a windows driver issue since I use a mac. In any case such an issue should have been resolved when I wiped the pod. I have not attempted to load any music on it or sync my library, so a corrupted file seems unlikely as well. there is no water damage and the case is in excellent condition. I have no idea whats wrong with it so any help or suggestions would be appreciated.

Hi clarity,
Welcome to Apple Support Communities.
You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
Best,
Jeremy

IPOD NANO 3rd Gen problem Apple Mac set up PC BASED MAIN UNIT

I have been asked by a friend to help out because they asked to add music to their new IPOD. But the owner is a tech scared person. They gave the unit an IPOD NANO 3rd Gen to my friend who uses Apple MAC they set up the IPOD with their Itunes and added the songs.
Later they wanted new tracks but have now downloaded ITUNES to their own PC Windows Vista system. The tracks were added to a USB memory stick and transfered and added to the PC Vista ITUNES. But now the IPOD Nano will not register on the Windows Vista ITUNES system but will show up on the "My computer"
I have reset the nano by holding the on/off and menu etc to get the Apple logo, the unit beeps as does the laptop PC Based ITUNES etc but will still not register on the ITUNES or allow me to sync the music from the ITUNES to the IPOD.
Can anyone advise how I can reformat the IPOD or reset the IPOD and remove all music currently on it to start again but get it to register/set up and show on the ITUNES on the windows VISTA unit rather than the mac based system.
Thanks,
Global_mongrel

Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

Ipod nano 3rd gen (click wheel)

I currently have a ipod nano 3rd gen with a click wheel. I have uninstalled, reinstalled itunes and rebooted my computer already (I have windows XP). It shows up in "My Computer" as unknown but itunes will not reconize the ipod is connected, but does with my other ipod. I've tried changing the drive letter on this 3rd gen; but it wont appear to even change the drive letter. I believe I need to download the drivers (its what i had to do with my previous ipod) but I would like a clue where to download the drivers from, or someone to shed any light and a solution for this issue. My ulitmate goal is to get itunes to reconize it so that I can restore the ipod
Thanks.

Clickwheel games are no longer available in the iTunes store. Sorry.
B-rock

I need help restoreing my ipod nano 3rd gen so its like new

I need help restoreing my ipod nano 3rd gen so its like new

Plug it to your computer using iPod USB Cable (any cable should work excluding iPhone 5 and Shuffle cables)...... when you see your iPod in iTunes go to that iPod and click restore...... the whole process should take (depending on what you have on your iPod and its is up to date) it should take no longer than 30 minutes...... then it will ask if you want to set up as new iPod or restore from back-up (itunes back up), since you said:
so its like new
click set as new iPod and follow through what they said.

Error I get when iPod Nano 3rd Gen is plugged into iTunes: The disk was not ejected properly. If possible, always eject a disk before unplugging it or turning it off.

Similar Messages

Maybe you are looking for