Error IBR with Webcenter Content cluster

Dear all.
I am using oracle webcenter content 11.1.1.6.
When i configure IBR single with single webcenter content   it working but  error with webcenter content cluster.
It still generate image but link access image not found and nolog.  I don't known why.
Thanks all.
Hoan

There's 1209496.1 from a few weeks ago.
also edited a few weeks ago: 1150893.1
There are a few others from last year, but these were the two that were at the top of the search. Perhaps it's a difference of the word 'cluster'. I use it primarily as the WLS group of managed servers. The IBR instances are not sharing resources or sharing queues of work, but they are configured in WLS as a set of clustered managed servers.
some repeated notes:
"IBR can not be active on more than one Managed Server cluster node at any time unless the following three (3) conditions are ALL meet.
The IBR instances are running on separate machines
The IBR instances do not share a file system
The IBR instances do not share a JVM or anything at all"
"All Inbound Refinery instances are completely independent. You can assign Inbound Refinery to a server group in WebLogic as a cluster, but it does not run as a cluster because each Inbound Refinery Managed Server runs independently.  If you do create a cluster in WebLogic for the refineries, the cluster is used for management purposes only.  If you are to "cluster" the refinery by putting two or more refinery managed servers in a cluster for them that you've created in a WebLogic domain, then the following three things must be true so that nothing is shared between the refineries.
The Refinery instances are running on separate physical machines
The Refinery instances do not share a file system, or any IBR configuration at all
The Refinery instances do not share the same JVM or anything at all
If the above three things are not true, you will encounter errors further down the line."
If you're going to update docs, there are at least a handful others that are specific to this case.
-ryan

Similar Messages

  • OCR with WebCenter Content and Imaging

    Hi,
    I'm searching for some information about OCR with webcenter content and imaging.
    I've seen that there are two solutions :
    - WebCenter Capture
    - Webcenter Forms Recognition
    But I can't find if any of that product use lexical post-correction of OCR results. Is anyone have this information?
    Thanks,
    David

    David:
    Both products will use print (vs handwritten) character recognition to identify "tokens" from the image of a document with text. Capture usage focuses mainly on zonal recognition of information - what I would call structured forms processing. Forms Recognition is for information capture from semi-structured documents - say invoices, where you know that many fields are present, but their location differs from example to example. It can use patterns, text locators, etc to find the field. Both benenfit when there exists a reference DB of acceptable values, but that is not a requirement.
    Lexical correction (as I understand it to mean) is not a feature of either. They are not going to try to validate extracted tokens based upon language analysis. I would try to use them to extract all of the tokens and then add some tool to do lexical analysis. You could do that as a separate, post OCR process, or try to see if you can fit it into an FR post-extraction EP.
    Might I ask what the business problem you are trying to solve is?
    Bernard

  • How can scan directly with webcenter content

    how can directly scan with webcenter content without other software for scanner
    tnx

    Hi,
    If you are referring to not using ODC/ODDC kind of software which has drivers to connect to Webcenter Content then following is what I can think of:
    1. Have your scanner drop the scanned images to a shared folder
    2. Have a standalone Java program to checkin the scanned images to Webcenter Content using RIDC API calls
    3. Access what set of metadata you want to set on the content, advice you set most of the general metadata on the folder so the content inherits them
    4. If the metadata is available in a database then you could use the Java program to look up to this DB for metadata which performing the checkin
    Regards,
    - Anand

  • "Content Less" workflows with WebCenter Content

    Hi,
    "BPEL Process Engine" comes along with WebCenter Content for restricted use (for developing workflows/processes within or between WebCenter Content components only).
    And as per the documentation only Basic (human triggered workflows with a document etc) and Criteria (auto triggered by an event - uploading a document etc.)
    But, can we create a workflows without a document/content? E.g. a simple workflow of leave application where no document upload is required. Or a simple process for Customer on-board where there is no document involved.
    Can anybody help me in understanding this?

    Hi ,
    For that you would have to set Metadata Only check-in which does not need a primary file . What it does is use the check-in form details and creates a file by itself (without having used any primary file) and creates the assets .
    So , from the WF point of view there need not have any changes . Only thing is from WCC check-in side .
    For details please check the following links:
    https://blogs.oracle.com/kyle/entry/check-ins_without_files_ucm
    Uploading Documents - Release 11g (11.1.1)- section 18.4.1.7 - Tip
    Hope this helps .
    Thanks,
    Srinath

  • Don't miss Thursday's Webcast: Security Scenarios with WebCenter Content 11

    Learn how user authentication and authorization is now implemented in WCC 11g by attending this 1 hour Advisor Webcast!
    Topic: Security Scenarios with WebCenter Content
    When: September 27, 2012 at 16:00 UK / 17:00 CET / 08:00 am Pacific / 9:00 am Mountain / 10:00 am Central / 11:00 am Eastern
    This one-hour session is recommended for technical and functional users who use WebCenter Content (WCC). This session will be used to explain how user authentication and authorization is now implemented in WCC 11g. Also the means that single sign can be used.
    TOPICS WILL INCLUDE:
    - How authentcation and authorization was handled in previous Content Server versions
    - The WLS mechanisms now used to provide user access and content security
    - External users and internal users
    - Overview of the WLS ldap provider configuration
    - How to differentiate Roles and Accounts
    - WCC credential mapping -- not WLS credential mapping
    - Single Sign on -- OAM only
    - Saml and Kerberos
    To register for this meeting:
    1. Event address for attendees: https://oracleaw.webex.com/oracleaw/onstage/g.php?d=595760912&t=a
    2. Register for the meeting.
    Once the host approves your request, you will receive a confirmation email with instructions for joining the meeting.

    Hi Everybody:
    I've found the solution. It was necessary to fill the roles on the Front End. However, this step is not mentioned on the GRC 10.1 Security guide, only in 10.0.
    Best Regards:
    Caio

  • UPCOMING Webcast on Sept 27th - Security Scenarios with WebCenter Content

    Learn how user authentication and authorization is now implemented in WCC 11g by attending this 1 hour Advisor Webcast!
    Topic: Security Scenarios with WebCenter Content
    When: 16:00 UK / 17:00 CET / 08:00 am Pacific / 9:00 am Mountain / 11:00 am Eastern
    This one-hour session is recommended for technical and functional users who use WebCenter Content (WCC). This session will be used to explain how user authentication and authorization is now implemented in WCC 11g. Also the means that single sign can be used.
    TOPICS WILL INCLUDE:
    - How authentcation and authorization was handled in previous Content Server versions
    - The WLS mechanisms now used to provide user access and content security
    - External users and internal users
    - Overview of the WLS ldap provider configuration
    - How to differentiate Roles and Accounts
    - WCC credential mapping -- not WLS credential mapping
    - Single Sign on -- OAM only
    - Saml and Kerberos
    A short, live demonstration (only if applicable) and question and answer period will be included. Oracle Advisor Webcasts are dedicated to building your awareness around our products and services. This session does not replace offerings from Oracle Global Support Services.
    WebEx Conference Details
    Topic: Advisor Webcast: Security Scenarios with WebCenter Content
    Date and Time:
    Thursday, September 27, 2012 5:00 pm, Europe Summer Time (Berlin, GMT+02:00)
    Thursday, September 27, 2012 4:00 pm, GMT Summer Time (London, GMT+01:00)
    Thursday, September 27, 2012 11:00 am, Eastern Daylight Time (New York, GMT-04:00)
    Thursday, September 27, 2012 10:00 am, Central Daylight Time (Chicago, GMT-05:00)
    Event number: 595 760 912
    To register for this meeting
    1. Event address for attendees: https://oracleaw.webex.com/oracleaw/onstage/g.php?d=595760912&t=a
    2. Register for the meeting.
    Once the host approves your request, you will receive a confirmation email with instructions for joining the meeting.

    You need to keep in mind that these OTN forums are user community forums and are publicly viewable to anyone with a web browser on the Internet.
    If you are to present a link into a forum post it needs to be a freely available link, else you need to qualify your post if it is not.
    If CSI/MOS login credentials are required (which seems to be the case here) then you need to be aware of that and state that fact. If your link is to be restricted to company-internal or for partner-only access, you need to state that.
    (... and company-internal or partner-only postings have no place in these user community forums)

  • Integrating BPM with WebCenter Content

    To integrate UCM and BPM, I followed this tutorial written by J@n van Zoggel.
    At the moment, I've already set up everything exactly as instructed in the tutorial. However, when I viewed a task in BPM Workspace, I still cannot see the Attachment section. In the log, I saw the following error:
    Ensure that credential store map WF-ADMIN-USER with key WF-ADMIN-CREDENTIAL
    contains UCM server admin username/password. Also ensure that Workflow configuration parameter
    UcmIdcUrl contains IDC socket connection url to connect to UCM server and UCM server has permission
    to let SOA server connect to it using IDC protocol.
    access denied ("oracle.security.jps.service.credstore.CredentialAccessPermission" "context=SYSTEM,mapName=WF-ADMIN-USER,keyName=WF-ADMIN-CREDENTIAL" "read")]]
    One thing I'd like to ask is that in all tutorials or articles I've read, the authors are always testing in the environment in which both the UCM and BPM servers are on the same machine. In my case, I am trying to connect my local BPM server with the online WebCenter Content server of my company, I wonder if I have to make any additional settings for this to work. A few pictures of my current settings are shown below.
    I'd be very grateful if you could share with me your experience in integrating BPM and UCM.
    Best regards,
    James Tran
    P/S: My environment is SOA Suite 11.1.1.7 and WebCenter 11.1.1.7
    1. UcmIdcUrl setting:
    2. WF-ADMIN-USER key map:
    3. WebCenter Content IP Filter:

    I don't believe that noone has ever tried to connect the local BPM environment to a remote WCC server before. Please let me know if you've ever experienced the same problem. Otherwise, even a simple "I tried to do the samething and I succeeded using the same steps in the tutorial" would help too .
    Another thing is that yesterday, I talked to the tech-lead and I learned that our WCC server environment doesn't have BPM installed yet. I am wondering if this would cause the WCC server to not understand the request from my BPM server. In addtion, I've also upgraded my local BPM server using the lastest SOA bundled patch. Should the same patch be applied to the WCC server environment too?
    I'd be very grateful for any advice .

  • OUI-10055:Error in accessing the registry - webcenter content installation

    Hi All,
    I get this OUI error while installing Webcenter Content 11g. I checked the registry permission on HKEY_LOCAL_MACHINE -> Software -> Oracle and it has necessary permission for the user. Can someone help me identify what other registry location that I need to check to get rid of this error. The user executing the installation is part of the administrator group and I still get this error.
    Regards,
    - Anand

    Hi All,
    I get this OUI error while installing Webcenter Content 11g. I checked the registry permission on HKEY_LOCAL_MACHINE -> Software -> Oracle and it has necessary permission for the user. Can someone help me identify what other registry location that I need to check to get rid of this error. The user executing the installation is part of the administrator group and I still get this error.
    Regards,
    - Anand

  • Webcenter -Content can be socialized ???

    Hello,
    We are work on POC and here I need your suggestions and help.
    We have an application using Site Studio and Webcenter Content. Our application shows different electronic products in each secondary page. Its working fine.
    Now we want our user to communicate. They should be allowed to express their experience and feedback. I looked into OSN - Conversation feature. I liked it!!
    what is our requirement and plan::
    1. We can have one small portlet where we can show latest conversation.
    2. If user want to express they can log in and add their comments.
    In different words, if you have used/ seen the Facebook application, currently we see one portlet on right top, which shows all the updates of your friends. Similar things but in my case we will show all the conversation related to the product. So if I am looking at Iphone product, we get all conversation only related to the Iphone. Once I switch to different page lets suppose Samsung 4S product page then we should see only conversation related to Samsung 4S product.
    Suggestion need??
    1. So do we have any connection with webcenter content and 'Oracle Social network' in terms of implementation.
    2. How can I selectively bring the conversation feature in my application?
    3. Do we have OSN downloadable tool available for POC?
    4. Please lets us know any development document available?
    Please let me know if you need more information.
    Thanks,
    MAK

    Hi Srinivas ,
    Yes , ECM can be integrated with Oracle EBS (enterprise business suite) and other Oracle Apps as well like Peoplesoft , Siebel etc .
    Details can be read from the following link : http://docs.oracle.com/cd/E23943_01/doc.1111/e17953/toc.htm
    Thanks
    Srinath

  • Deployment Error In Webcenter Content Components

    Hi All,
             After Installation of WebCenter Content I logged in to Web-logic Administration Console Where the deployment part shows the following errors:
    The Deployment of some particular components shows state as "Failed".Please tell me how to rectify it.

    Hi,
        Thanks for the reply,The files shows a bunch of statements where am not getting any clue.I copied the statements below,If u find anything pls let me know,
    <Feb 25, 2015 2:46:37 PM> <INFO> <NodeManager> <Server output log file is 'D:\Oracle\Middleware\user_projects\domains\base_domain1\servers\URM_server1\logs\URM_server1.out'>
    'D:\Oracle\MIDDLE~1\ORACLE~2\ucm\idc\bin\\Installer64' is not recognized as an internal or external command,
    operable program or batch file.
    'D:\Oracle\MIDDLE~1\ORACLE~2\ucm\idc\bin\\Installer' is not recognized as an internal or external command,
    operable program or batch file.
    Content Server provided no native path information in idcCommEnv.cmd.
    'D:\Oracle\MIDDLE~1\ORACLE~2\ucm\idc\bin\\Installer' is not recognized as an internal or external command,
    operable program or batch file.
    'D:\Oracle\MIDDLE~1\ORACLE~2\ucm\idc\bin\\Installer' is not recognized as an internal or external command,
    operable program or batch file.
    FINDSTR: No search strings
    JAVA Memory arguments: -Xms256m -Xmx512m
    WLS Start Mode=Development
    CLASSPATH=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;D:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\JROCKI~1.0-1\lib\tools.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.6.0.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;D:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;D:\Oracle\MIDDLE~1\ORACLE~1\soa\modules\commons-cli-1.1.jar;D:\Oracle\MIDDLE~1\ORACLE~1\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;D:\Oracle\MIDDLE~1\ORACLE~2\ucm\idc\jlib\idcloader.jar;D:\Oracle\MIDDLE~1\ORACLE~2\ucm\idc\components\NativeOsUtils\classes-NativeOsUtils.jar;;.;D:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\JROCKI~1.0-1\lib\tools.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.6.0.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;D:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;
    PATH=D:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\native;D:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\native;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;D:\Oracle\MIDDLE~1\JROCKI~1.0-1\jre\bin;D:\Oracle\MIDDLE~1\JROCKI~1.0-1\bin;D:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\native;D:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\native;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;D:\Oracle\MIDDLE~1\JROCKI~1.0-1\jre\bin;D:\Oracle\MIDDLE~1\JROCKI~1.0-1\bin;C:\ProgramData\Oracle\Java\javapath;E:\OraHome_1\bin;E:\OraHome_1\jre\1.4.2\bin\client;E:\OraHome_1\jre\1.4.2\bin;D:\DevSuiteHome_2\jdk\jre\bin\classic;D:\DevSuiteHome_2\jdk\jre\bin;D:\DevSuiteHome_2\jdk\jre\bin\client;D:\DevSuiteHome_2\jlib;D:\DevSuiteHome_2\bin;D:\DevSuiteHome_2\jre\1.4.2\bin\client;D:\DevSuiteHome_2\jre\1.4.2\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
    *  To start WebLogic Server, use a username and   *
    *  password assigned to an admin-level user.  For *
    *  server administration, use the WebLogic Server *
    *  console at http:\\hostname:port\console        *
    starting weblogic with Java version:
    java version "1.6.0_29"
    Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
    Oracle JRockit(R) (build R28.2.0-79-146777-1.6.0_29-20111005-1808-windows-ia32, compiled mode)
    Starting WLS with line:
    D:\Oracle\MIDDLE~1\JROCKI~1.0-1\bin\java -jrockit   -Xms256m -Xmx512m -Dweblogic.Name=URM_server1 -Djava.security.policy=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.system.BootIdentityFile=D:\Oracle\Middleware\user_projects\domains\base_domain1\servers\URM_server1\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xverify:none  -da -Dplatform.home=D:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server  -Dcommon.components.home=D:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=D:\Oracle\MIDDLE~1\user_projects\domains\base_domain1 -Djrockit.optfile=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=D:\Oracle\MIDDLE~1\user_projects\domains\base_domain1\config\fmwconfig\servers\URM_server1 -Doracle.domain.config.dir=D:\Oracle\MIDDLE~1\user_projects\domains\base_domain1\config\fmwconfig  -Digf.arisidbeans.carmlloc=D:\Oracle\MIDDLE~1\user_projects\domains\base_domain1\config\fmwconfig\carml  -Digf.arisidstack.home=D:\Oracle\MIDDLE~1\user_projects\domains\base_domain1\config\fmwconfig\arisidprovider -Doracle.security.jps.config=D:\Oracle\MIDDLE~1\user_projects\domains\base_domain1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=D:\Oracle\MIDDLE~1\user_projects\domains\base_domain1\servers\URM_server1\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1,D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol  -Dweblogic.jdbc.remoteEnabled=false  -Dipm.oracle.home=D:\Oracle\Middleware\Oracle_ECM1 -Ducm.oracle.home=D:\Oracle\MIDDLE~1\ORACLE~2 -Dirm.oracle.home=D:\Oracle\Middleware\Oracle_ECM1 -Dem.oracle.home=D:\Oracle\Middleware\oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=false -Dweblogic.management.server=http://192.168.55.41:8001  -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sysext_manifest_classpath  weblogic.Server
    [WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
    <Feb 25, 2015 2:46:41 PM IST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Feb 25, 2015 2:46:42 PM IST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Feb 25, 2015 2:46:42 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.0-79-146777-1.6.0_29-20111005-1808-windows-ia32 from Oracle Corporation>
    <Feb 25, 2015 2:46:45 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0  Tue Nov 15 08:52:36 PST 2011 1441050 >
    <Feb 25, 2015 2:46:48 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Feb 25, 2015 2:46:48 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Feb 25, 2015 2:46:49 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file D:\Oracle\Middleware\user_projects\domains\base_domain1\servers\URM_server1\logs\URM_server1.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <Feb 25, 2015 2:46:49 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\Oracle\Middleware\user_projects\domains\base_domain1\servers\URM_server1\logs\URM_server1.log00003. Log messages will continue to be logged in D:\Oracle\Middleware\user_projects\domains\base_domain1\servers\URM_server1\logs\URM_server1.log.>
    <Feb 25, 2015 2:46:49 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file D:\Oracle\Middleware\user_projects\domains\base_domain1\servers\URM_server1\logs\URM_server1.log is opened. All server side log events will be written to this file.>
    <Feb 25, 2015 2:47:26 PM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Feb 25, 2015 2:48:56 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Feb 25, 2015 2:48:57 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Feb 25, 2015 2:50:30 PM IST> <Warning> <JDBC> <BEA-001110> <No test table set up for pool "URMDS". Connections will not be tested.>
    <Feb 25, 2015 2:51:15 PM IST> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in D:\Oracle\Middleware\oracle_common\atgpf\modules\oracle.applcore.model_11.1.1\oracle.applcore.model.stub.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
    <Feb 25, 2015 2:51:28 PM IST> <Warning> <Security> <BEA-090668> <Ignored deployment of role "Admin" for resource "type=<url>, application=DMS Application#11.1.1.1.0, contextPath=/dms, uri=/">
    <Feb 25, 2015 3:05:55 PM IST> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.rules, referenced from: D:\Oracle\Middleware\Oracle_ECM1\soa\modules\oracle.soa.workflow_11.1.1\oracle.soa.workflow.wc.jar]. Make sure the referenced optional package has been deployed as a library.>
    INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
    <Feb 25, 2015 4:53:05 PM IST> <Warning> <oracle.adfinternal.view.faces.partition.FeatureUtils> <ADF_FACES-30130> <Ignoring feature-dependency on feature "AdfDvtCommon".  No such feature exists.>
    IDC Servlet initial class path is D:/Oracle/MIDDLE~1/ORACLE~2/ucm/idc/jlib/idcserver.jar
    Thanks,
    Guru.

  • Integrating WebCenter Content with BPM

    To integrate UCM and BPM, I followed this tutorial written by J@n van Zoggel.
    At the moment, I've already set up everything exactly as instructed in the tutorial. However, when I viewed a task in BPM Workspace, I still cannot view the Attachment section. In the log, I saw the following error:
    Ensure that credential store map WF-ADMIN-USER with key WF-ADMIN-CREDENTIAL
    contains UCM server admin username/password. Also ensure that Workflow configuration parameter
    UcmIdcUrl contains IDC socket connection url to connect to UCM server and UCM server has permission
    to let SOA server connect to it using IDC protocol.
    access denied ("oracle.security.jps.service.credstore.CredentialAccessPermission" "context=SYSTEM,mapName=WF-ADMIN-USER,keyName=WF-ADMIN-CREDENTIAL" "read")]]
    One thing I'd like to ask is that in all tutorials or articles I've read, the authors are always testing in the environment in which both the UCM and BPM servers are on the same machine. In my case, I am trying to connect my local BPM server with the online WebCenter Content server of my company, I wonder if I have to make any additional settings for this to work. A few pictures of my current settings are shown below.
    I'd be very grateful if you could share with me your experience in integrating BPM and UCM.
    Best regards,
    James Tran
    P/S: My environment is SOA Suite 11.1.1.7 and WebCenter 11.1.1.7
    1. UcmIdcUrl setting:
    2. WF-ADMIN-USER key map:
    3. WebCenter Content IP Filter:

    Hi James,
    I have had huge problems applying SOA bundled patches using the Readme.txt files. Mainly as they are supposed to be roll-up patches but some earlier ones state that they need to be applied to WC1 as well as SOA1 but not the later patches. What I do now is apply them to SOA1, WC1, ECM1 and oracle_common at the same time. I am only using a pre-built VM but it seems to solve various issues I have had.
    Also recently I had problems with Attachments in Human Tasks so I applied patch p19546426_111176_Generic... I installed into SOA1, oracle_common, ECM1, WC1 (not just SOA1 like the Readme.txt says) and then they started working. This was after many failed attempts following the Readme.txt...
    Hope this helps

  • Document Creation error - "We're sorry. We can't open document name because we found a problem with its contents"

    Morning Friends,
    I have created a SharePoint 2010 "Site Workflow" that is designed to take information from a form and create a Word doc with the gathered information and store this Word doc in a document library.
    I am using Sharepoint 2013 with Office 2013 
    I understand there are a lot of steps (19) outlined below and I can provide more information as needed but the bottom line is this, workflow successfully takes info from an initiation form, uses the info to create a Word doc. Places this Word doc in a library.
    When attempting to open / edit doc, receive error
    "We're sorry. We can't open <document name> because we found a problem with its contents"
    Details - No error detail available.
    Any info or advice would be greatly appreciated. 
    Very high level view of what I have done:
    1 - Created content type called "Letters"
    2 - Added site columns " First Name" and "Last Name"
    3 -  Created and saved to my desktop a very basic Word document (Letter.docx) that says "Hello, my name is XXXX XXXX"
    4 - In the advanced settings of the "Letters" content type I uploaded this "Letter.docx" file as the new document template.
    5 - Created a new document library called "Letters"
    6 - In Library Settings - Advanced Settings, clicked "Yes" to enable the management of content types.
    7 - Then I clicked "Add from existing content types" and added the "Letters" content type
    8 - Back in the advanced settings of the "Letters" content type I selected "Edit Template" and replaced the first XXXX with the Quick Part "First Name" and the second XXXX with the Quick part "Last Name"
    9 - Created a new 2010 Site workflow called "Create a Letter"
    10 - To the workflow I added the action "Create List Item"
    11 - Configured the action to create Content Type ID "Letters" in the document library "Letter" 
    12 - For the "Path and Name" I gave it a basic name of "Letter to"
    13 - The next step was to create the Initiation Form Parameters and added to form entries "First Name" and "Last Name"
    14 - I then linked the initiation form fields to the data source "Workflow Variables and Parameters" to their respective Field from Source parameters
    15 - Went back to the "Path and Name" and modified the basic name of "Letter to" to include the first and last name parameters.
    16 - Saved - published and ran the work flow.
    17 - As expected, Initiation Form prompts for First and Last Name. ("John Doe") Then click "start
    18 - Go to document library "Letters" and see a new Word document created titles "Letter to John Doe" 
    19 - Go to open / edit the Word document and receive the following error
    thoughts? Any info or advice would be greatly appreciated. 

    See this MS support article for SP2010 workflows and generating Word docs:
    https://support.microsoft.com/kb/2889634/en-us?wa=wsignin1.0
    "This behavior is by design. The Create
    List Item action in the SharePoint
    2010 Workflow platform can't convert Word content type file templates to the correct .docx format."
    I've had success in using SP 2013, Word 2013 (saving a .docx as the template instead of .dotx for the document library content type), and an SP 2010 workflow using SP Designer 2013.

  • Error message in .docx : 'Open XML file cannot be opened because there are problems with the contents. Details Unspecific error Location: 2'

    I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
    error, Location: 2'
    When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
    were illegible, but no other weirdness was observed.
    I have microsoft 2008 installed on my Mac OS X version 10.6.8.
    I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
    I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docx

    Hi,
    This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
    Please use the "Fix it" tool in the following KB article to resolve the problem. See:
    http://support.microsoft.com/kb/2528942
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support

  • Lync 2013 Error - Certificate could not be published in the database associated with User Services Cluster

    Hi Lync gurus,
    I have a weird issue:
    Just installed a Lync Standard 2013. 
    Everything works except I keep getting this error in Log: every 30 minute or so.
    First an Error:  Event 47067
    A server did not respond to HTTP request
    Server lyncserver.domain.local did not respond to HTTP request PublishCertRequest targeted at
    https://lyncserver.domain.local:444/LiveServer/UserPinService.
    Cause: Server might be down or the network path between servers might not be properly configured.
    Resolution:
    Please ensure that the server can be connected on the target port using telnet and then re-try.
    Then I get a Warning: Event 47068
    GetAndPublish web service failed.
    Certificate could not be published in the database associated with User Services Cluster [lyncserver.domain.local ]. Request Details - Entity: [[email protected]], Device Id: [6BB30A3E-2923-553A-8E5F-0B2FB2CEA330], Authenticated User: [sip:[email protected]].
    Additional Context: [Publish_Failure: OtherFailure;HttpNoResponse:"lyncserver.domain.local "]
    Cause: This could be due to network connectivity issues with the remote server, or because the database is down.
    Resolution:
    Please ensure that the user services is reachable and the database is up and running.
    Thanks for any help

    Please check you can telnet port 443 and port 444 on Lync Front End Serve from client.
    Try to regenerate a new certificate for Lync Front End Server.
    Check all the services on Lync Front End Server are started.
    Check the option “Enable all purposes for this certificate” is checked for the trusted root CA certificate.
    For the detailed steps:
    Run MMC--Add\Remove Snap-ins--certificates--Local Computer--Trusted Root Certificate Authorities--Certificates, find the Root CA certificate you installed--Properties--General, check the "Enable all purposes for this certificate".
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error when associating workflow with Task Content Type

    Using SharePoint Designer 2010, I have created a simple workflow that sends an email out when a tasks due date has past.  I created this as a Global Workflow and then tried to "Associated to Content Type", selecting "Task".  I am then taken
    to... COMPANY PORTAL--> Site Settings--> Site Content Types--> Task--> Add a Workflow. When I try to associate the new "Global" workflow and select OK I get the following error...
    Error
    Workflows may not be associated with content types whose base is on 'WorkflowTask'.
    I have looked up the error but find no real explination of what it means.  And I have associated global workflows with custom content types and never had this issue. 
    So what's going on?
    Thanks
    Steve
    Thanks in advance for your time. Steven

    Hi ,
    I understand that when you bind the workflow to Tasks content type, there is an error. I can reproduce this error. This is because we cannot add a reusable workflow to a workflow tasks content type. When you add the reusable workflow to the Tasks content
    type, you must have checked the ‘Add this workflow to all content types that inherit from this content type’. In this way, the workflow will be added to all the Tasks content type and workflowtasks content type. There will an error. After you close the error
    message, the workflow is added to the Tasks content type.
    The workaround is the check No to ‘Add this workflow to all content types that inherit from this content type’.
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

Maybe you are looking for