Error importing a PNG into After Effects CS6

I'm trying to import a .png file into After Effects CS6 (version 11.0.4.2) and keep getting this error message:
Followed by this one after I click "OK":
The .png imports fine into After Effects CC so I don't think the file is corrupted or anything like that. I need to make some motion graphics using Trapcode though and I only have that for CS6 so I'm stuck at the moment. Why is this happening in CS6? If there's no solution I guess I'll have to pay for the Magic Bullet upgrade and just do it in CC but it would be great if I could just figure out why this is happening in AFX CS6...
Here's what I'm running:
MacBook Pro (Retina, 15-inch, Mid 2014)
2.8 GHz Intel Core i7
16 GB 1600 MHz DDR3
NVIDIA GeForce GT 750M 2048 MB
Thank you!

No it was just a .png I downloaded from a Google image search. This is it: http://naturalearth.springercarto.com/ne3_data/8192/masks/water_8k.png

Similar Messages

Cannot import .mov files (from JVC HM100) into After Effects CS6

Hi,
I am trying to import .mov files into After Effects CS6. Unfortunately, when I try to import the .mov files, AE tells me "After Effects error: 210_0001_01.mov cannot be imported -- this '.mov' file is damaged or unsupported." The file works in Premiere CS6. I have the latest Quicktime, and even with Quicktime 7 Pro installed, I got that same result. I would appreciate any advice on this problem.
Thank you.

RobertHorn2012 wrote:
I'm going to set up a new sequence with just the clip I'm using after effects on. I'm going to import that sequence into AE.
Your footage is currently a long-gop codec, which may be giving Mocha fits. So instead of Dynamic Link, you may want to simply export the clip in question from Premiere using a lossless codec. Remember to leave handles on the footage.
To get back to Premiere you would then render in a lossless codec. It's not very handy, but it will get the job done.
Give it a try and see what happens.

Imported song into After Effects CS6 and won't fully render.

I imported a song into After Effects CS6 to use audio waveforms. I click RAM preview but it won't render or play past 18 seconds. What am I doing wrong and how do I render the entire audio track so it will actually play all the way through with the effects on it.

Ram preview length is determined by the amount of available ram. It is also usually limited to the work area. Either lower the resolution of the comp window or extend the work area.
Please read the FAQ section at the top of the forum. You'll have your answer there.

Problem with importing premiere project into after effects

Hi. When I import premiere project into after effects CS4 the files I speed up 2x (for example) look likes on the snapshot below, and they are not in the correct places.
what can I do?

Then don't speed them up... This is "as designed". AE and Premiere are not compatible in their tiem-remapping/ time-stretching, so tehre is no way to move between them without losing that info.
Mylenium

Problem importing adobe premiere project into After effects CS6

I've been working in Adobe's premiere and after effects for quite a few years now and this problem is new to me.
I'm working on a project in After Effects CS6 and want to import a premiere pro project into After Effects. I go -> File -> import -> adobe premiere project
Select project
Select sequence
Now After Effects CS6 imports all files from the premiere pro project like before in CS5, but now also imports the videofiles as sequences at the root in my project panel and messes everything up. Before it usually imported nice and tidy with the same folder structure as the premiere pro project would have.
But that isn't the main problem. When i open the sequence i wanted to import and work on, some clips have been shortened down to 1 FRAME LONG at the end. These clips have a 500% speed in premiere pro, but this has never been a problem before, after effects has always before been able to translate the speed variations in clips from premiere -> after effects.
The adobe premiere project that was imported is a 60 sec promo with various clips in various formats (Gopro h264, dv pal quicktime etc). Footage not exceeding the fair amount that after effects should handle. 15-20 videfiles at 30 sec each.
I've never had this problem before with premiere <-> after effects.
Anyone?

I just found the solution!
In my adobe premiere project that i was trying to import, some of the clips were "right clicked" and applied "Scale to frame size"
Every videoclip that had "scale to frame size" in my adobe premiere pro sequence would import as its own composition in After Effects rather than just a videofile, and some of the clips would be trimmed down to be invisible.
So if you have any problem with a clip not importing correctly into a sequence in after effects, check to make sure "scale to frame size" is not applied to the clip in premiere pro.
I removed the scale to frame size in the premiere project and now everything imports fine into after effects.
Sorry for the post.

Importing Motion 2 into After Effects 7

Is it my imagination and/or lack of knowledge, or does AE7 not allow for the import of Motion 2 (with .motn or .mov as the extension)? I've tried it every way I can think of (based on the previous posts here about getting Motion 2 into AE6.5) and I can't get it to work.
Anyone else know for certain if this functionality is now broken?

I'm basing my question off of this info (as found at http://www.apple.com/finalcutstudio/motion/):
"Integrated Workflow
You can now use Motion in conjunction with Adobe After Effects. All of the particle effects, Replicator designs and animations in Motion can be added to an After Effects “comp” without rendering. Making a change is as simple as selecting “Open in Editor” from the After Effects edit menu."
And clicking on the "Features" link at the top of that same page leads to:
"In fact, Motion gets along so splendidly with Adobe After Effects that you can drag and drop project files into the latter or launch Motion from within After Effects."
Clicking further on the "Adobe After Effects Integration" link at the bottom of the "Features" page leads to this quote:
"You can also work hand-in-hand with Adobe After Effects. Drag and drop your native Motion 2 project files into After Effects 6.5 without rendering. To make a change, simply launch Motion from within After Effects; the changes you make will automatically update in your After Effects composition. And those who normally use After Effects can now easily access the intuitive particle creation, elegant Replicator designs and drag-and-drop procedural animation found in Motion 2."
I'm looking to be able to use this functionality with Motion 2 and After Effects 7. I'd prefer to remove the step of exporting .mov files out of Motion projects when I could possibly just import or drag/drop a native Motion 2 file right into After Effects 7 without rendering, as Apple states became possible in version 2.
Right now, when I attempt to do so with AE7, I get an error message that reads:
"After Effects error: retrieving movie from file "File Name" -- no QuickTime movie found (-2048).
( 10 :: 21 )"
That's when I try using the .motn and .mov extension. I'm guessing that Apple will have to alter the way Motion files are read as Quicktime files in order to get After Effects to recognize them as version 6.5 did.
Is this not correct?
G5 Dual 2GHz (Rev. B); 12 Powerbook G4 867 Mac OS X (10.4.3)

Importing Premiere Project into After Effects

When I import a Premiere Pro project into After Effects, it splits every shot onto a new track, ending up with a couple of hundred tracks at the end.
Is there a way to avoid this ?
Particularly, since I'd want to keep the option of bringing the project file back in Premiere for further editing.
My colorist suggested that I nest reels of my timeline and split it that way so that when he imports it he has nests on one timeline and the multiple tracks in each of those nests. Still, this feel very clunky.

Since my colorsit doesn't have CS4, I nested sequences in another timeline so that when I imported project in AE my colorist could see the one clip nest and click it to see other timeline to see all clips detail.
Thank you.

Problem with sound when import from Premiere into After Effects

Hi!
I imported a sequence from a Premiere Pro project using File -> Import -> Adobe Premiere Project...
The video in the sequence showed up in the After Effects project as a composition. However, the composition did not include the sound from the sequence! Is there a way to keep the sound from the sequence upon import into After Effects?
Thanks

i`m sorry about the screenshot size, but i could only upload pics with 605 px width.
Nevertheless it seems that you saved my day. looks like it was all about the scale to framesize thing.
thank you so much!!!!

Error on Start-up for After Effects CS6

Okay, hello.
I have Adobe After Effects CS6, and I have recently gotten this error. I have posted about this before and the only thing I get is "Re-Install the product" or "Run the Adobe Cleaner and Re-Install and Restart" All of these things I do and they do not work!
I have also referred to the article about changing permission and this does not work either. So if someone has fixed this another way and could level with me so that I can go back to using this program. Any questions I am happy to provide the answer too.
"Emphasis on the 'Error: 16'"

Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium

Importing Illustrator layers into After effects, released to layers yet still one layer- ?

Hi,
Please bear with me as this should be a simple fix but the situation is hard to describe.
I want to import layers from Illustrator into After Effects. I need the AI layers to have their "handles" (the four corners of the object) close in around the object and not spread out to the corners of the composition. I figured out how to do this: by "releasing layers to sequence" in Illustrator and then dragging them out of the group they were all in. Then I "import as composition - retain layer sizes" into AE. When I open the illustrator composition in AE, it's layers appear in AE as separate layers and with the layer 'handles' tight around the objects (all is well). BUT here is what I want to do: I have a layer/object in Illustrator that I "image traced" to make it black but it still has some white parts to it. So I drew two black rectangles around the white parts. But now when I bring it into AE, they all appear as separate layers (the image traced object and the two rectangles) but I want those black rectangles to be literally part of the object that I image traced. In photoshop this would be akin to "flattening the layers". I can do this in AI by "merging" the layers, but if I do that I am brought back to the problem of having AE put the layer's 'handles' to the corners of the comp window and not tight around the object. Frustrating!
So I basically want to be able to paint over/cover up the white parts of my object without that creating new layers/objects.
Thanks for reading!
T

I'm not clear what you are describing. Have you actually tried other import settings in AE? There is some bug with the retain layer size stuff, but other combinations might work. Also try exporting a PDF of the artwork and using that. This may work better.
Mylenium

Import edge animate into after effects

Hi, is there any possibility to import a file that is created in edge animate into after effects?

I don't think you can as they are both two different technologies. Understand that an Edge Animate file is really an HTML5 file. The actual stage that is used when creating your Edge Animate file will also import an HTML file.
Maybe one of the Adobe mods can chime in to help.

Importing Motion project into After Effects

I am attempting to import a Motion 4 project in After Effects CS4. I am using the suggested instructions:
1 In After Effects, choose File > Import > File.
2 In the Import File dialog, choose All Files from the Enable pop-up menu.
3 Click to select the Motion project you want to import.
4 Choose QuickTime Movie from the Format pop-up menu.
5 Click Open.
Motion does not show up in After Effects. What went wrong?

You could check this for instead
http://provideocoalition.com/index.php/motiongraphicsvizfx/story/moveprojects_from_fcp_to_ae_seamlessly_andfree/

Question - Importing Flash Project into After Effects, Possible?

Hi,
Is there a way to open a Flash file (FLA) in After Effect?, cause I saw you can open an AEP that was converted to XFL in Flash... I want to be able to open my Flash project in After Effects, same way I can import a PSD as a composition, is there a way to do that?

No, not possible. The principles are too different and it would require too many resources just to develop a conversion method. If you look closely, you will notice that even XFL is somewhat limited because of that. You can, however, still import SWF files once you are done with your work in Flash or render an image sequence from there.
Mylenium

Error code 15 while launching After Effects CS6

Hello everyone,
I just installed the trial of After Effect and when I launch it, I have message box, with the message " Uninstall and reinstall the product. " There is also an error code, 15.
Is there someone who can help me?
Thanks,
indhi999.
PS:
Of course, I tried reinstalling After Effects, it don't works.

Re,
Now it works...
So the problem is resolved.
Bye !

Importing an Illustrator CS6 in After Effects CS6

When I import the file into After Effects CS6 I only see a black scree and you can move the squares. What am I doing wrong?
Thanks,
Joe.

The top pic. is a Ai file.
Well here is what I do in Ai I have a white background create a few squares and a text, all in different colors. I am not using black. I same the file and then import it in After Effects and choose to keep layers. And I all I get is a black square with non of the graphics that I created.
Thanks,
Joe

Error importing a PNG into After Effects CS6

Similar Messages

Maybe you are looking for