Error importing HCM project in txn SXDA

According to the "Quick Guide to Installing the SAP Best Practices for Human Capital Management (US)", step 2.4, I am to use transaction SXDA to upload a project which has been extracted from Note 1060029. When I do so, I get the error:
File C:\usr\sap\trans\LSMW_RS5_ZHRMASTER.txt with 0 successful/0 erroneous IDocs performed
followed by:
Line 0000001 of file does not contain an IDoc control record (message SDX222)
The first part of the file looks like this:
[Legacy System Migration Workbench]
LSMW Version Number : 4.0.0
LSMW Version Date : 31.08.2004
R/3 Installation Number : 0020224520
R/3 System Id : RS5
R/3 Release : 700
R/3 Client : 095
R/3 Operating System : SunOS
R/3 Database System : DB6
R/3 Hostname : uscirs5
User Id : HORBACH
Date : 12.06.2007
Time : 10:31:35
Local Date : 12.06.2007
Local Time : 10:31:35
Local Timezone : CET
[Project Information]
[Project Name     ] : ZHRMASTER
[Project Text     ] : BP HCM Employee Master Data Load - V1
/SAPDMC/LSGPRO                ZHRMASTER      HORBACH     20070612
/SAPDMC/LSGPROT               EZHRMASTER      BP HCM Employee Master Data Load - V1
[Recordings]
Any hints as to how to get past this error?
Thanks in advance.
Robert Pederson

Try to syncronize DC dependencies (in Development Configuration perspective: "Sync Used DCs")... after, rebuild your project.
regards,
Angelo

Similar Messages

Error importing old project into Premiere Elements 11

Trying to import old project backup - that I made a couple of years ago. When importing the Project file, I get the error
"The selected file cannot be linked because it's type (video) does not match the original files type (audio and video)."
I try and select the file, but it then gives the error "The selected file cannot be linked because its type (audio and video) does not match the original file's type (video).
If I skip the ones that give me the error, I get an incomplete edit - with lots of bits missing.
HELP!!! I need to sort this asap......for a client.
Thanks

filippinno
Here is my plan, either a start to better or a dud. We are going to start small to get a foothold in this.
My major puzzlement is you telling me that you are replacing video with video and getting the message
The selected file cannot be linked because its type (audio and video) does not match the original file's type (video)
.The only time I have ever seen that message is when someone is trying to replace still with video or video with still.
At this moment, where are the source media that went into the original Premiere Elements 9.0/9.0.1 project? Let us say, all in Documents in a folder named Special - all have their original names. Given that you are 100% that they are the ones that went into this project...the type (video or still) and file name and file extension.
I am not sure if it matters for this test whether or not you are using Premiere Elements 11 or 9.0/9.0.1, I just want to find out what is going on with your source media.
(a) Open the project using Skip All if you are hit with a bunch of "Where is....?" messages which I assume you will be.
(b) Go to the Timeline, pick a file with the colorful Media Offline display, write down the file name from its title band.
Right click that file on the Timeline and select Find in Media.
From Organize Media, delete the Media Offline thumbnail that was pointed out to you clicking Reveal in Media.
Go back to the Timeline and this same file, right click it and this time select Reveal in Project. That should take you to Project. Delete the file there that Reveal in Project points you to. That will also delete is counterpart on the Timeline. All traces of that particular Media Offline file are now gone in the project.
In that project, go to Get Media/Files and Folders and browse to and select the original file (with the exact same file name and kind that you just deleted from the project) that you have saved back in that Special Folder in Documents.
Drag that file from Organize Media or Project to the Timeline in the space made available by your deletion of it as an Media Offline thumbnail.
Does that work to replace that particular file. Is it the file that you had there originally? Keep in mind that we are identifying this file by name in each step and need a match of file name from start to end.
If this works for one, then we can plan around this basic finding. And, if this works we may revert back to Replace Footage. But, let us see what happens here first.
What is your estimate of how many of these Media Offline displays are there to be dealt with? How many of the media are in place on that Timeline and are no problem?
Looking forward to the results.
Thanks.
ATR

Error Importing Adapter Project Template

I am trying to import xml template PROJ_Template_Adapter_Project and I am receiving the error message below. I am using ODI 11.1.1.5. Is anyone familiar with this error?
com.sunopsis.core.SnpsInexistantObjectException: ODI-10038: The interface you are trying to use (ERP to Logical Balances) is related to a logical schema (ERP_SOURCE) that no longer exists.
     at com.sunopsis.dwg.ImportListener4XRefs.getWorkITechno(ImportListener4XRefs.java:376)
     at com.sunopsis.dwg.ImportListener4XRefs.getITechnoOfSrcTable(ImportListener4XRefs.java:311)
     at com.sunopsis.dwg.ImportListener4XRefs.insertTxtXRefs(ImportListener4XRefs.java:232)
     at com.sunopsis.dwg.ImportListener4XRefs.insertXRefs(ImportListener4XRefs.java:183)
     at com.sunopsis.dwg.DwgObject.doImport(DwgObject.java:6058)
     at com.sunopsis.dwg.DwgObject.importFromXml(DwgObject.java:5650)
     at com.sunopsis.dwg.DwgObject.importFromXmlWithCommit(DwgObject.java:5695)
     at com.sunopsis.graphical.dialog.SnpsDialogImportXml.doImport(SnpsDialogImportXml.java:375)
     at com.sunopsis.graphical.dialog.SnpsDialogImportXml$1.doInBackground(SnpsDialogImportXml.java:1248)
     at com.sunopsis.graphical.tools.utils.swingworker.SwingWorker$1.call(SwingWorker.java:240)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at com.sunopsis.graphical.tools.utils.swingworker.SwingWorker.run(SwingWorker.java:278)
     at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
     at java.lang.Thread.run(Thread.java:662)

Yes. We are familiar.
You are trying to import the project into a new work repository. And the Master repository for this work repository doesnt contain the logical schema ERP_SOURCE. You will have to create this logical schema (and perhaps physical schema and other connections too) and then try to import your project.

Error importing iDVD projects - feature or bug?

I know you used to be able to import projects created in iDVD into DVD Studio Pro, but is that a thing of the past? I see there's a current known issue where projects created in iDVD 5 or 6 will not import into DVD Studio Pro 3 or 4
http://docs.info.apple.com/article.html?artnum=301385
and I'm wondering if that's as designed or if it's a bug that's being worked on. If there are any existing threads on the topic, I'd much appreciate a link. Couldn't find one other than the above Support document.
Thanks!

Another Discussion Link
Forgot to close the link, sorry
But here Using DVD SP Elements also works to some degree with iDVD elements and you can get elements and recreate to a template, have not worked it all through with all the new iDVD yet though you can get some elements (from iDVD APP->SHOW Packages>

MDL1261: Error Importing

Hello, OWB gurus! :)
I exported a process flow into an MDL file from our test environment, say DBTEST.
Upon importing it to our production environment, say DBPROD, I got the following error:
"Error at line 141: MDL1261: Error importing PHYSICALOBJECT PROJECT.PROCESS.PACKAGE.null.
Detailed Error Message:
API0259: The object cannot be edited in Read-Only mode!"
Here are my import options:
1. Create New Metadata
2. Match by Name
Other details:
-- DBTEST and DBPROD have the same project name (say PROJECT), process flow module (PROCESS), etc. They have the same module/database/object names, in short.
-- Repository owner has full access (any procedure)
This only happens whenever I am importing process flows. I can successfully import tables and mappings.
I tried searching answers through the internet, but I don't know why I couldn't find one. I would like to ask the help of our OWB gurus, or anyone, out there. =)
Thanks a lot,
Manoy

Hi,
No process was running when I imported the objects. I also tried importing other process flows individually (after exporting them one by one), still I got the same error.
Thanks. :)
Manoy

Error while importing MS project into cProject

Hi
I am getting the below error while importing MS project client file or XML file into cProjects.
dpr_shared087
Logon language becomes original language
Message no. DPR_SHARED087
Diagnosis
The logon language is defined as a possible text language in Customizing for Collaboration Projects under Specify Text Languages. Therefore, it is valid.
System Response
The logon language becomes the original language of the new object that was created.
Kindly suggest what configuration data if any is missing.
Regards
Srikrishna

Hi
I am getting the below error while importing MS project into cProject.
Error occurred when importing from Microsoft Project
Message no. DPR_UI_BSP116
Diagnosis
When a project is imported from Microsoft Project, the system generates an XML string during internal processing. A project is then created in cProjects from this string.
The XML string contains errors because the values from Microsoft Project were transferred without verification.
Procedure for System Administration
Notify SAP or call the cProjects application with the "DebugMode=X" query string and carry out the import again.
The XML string that was generated temporarily is then validated against the cProjects XML schema. The error message from the XML parser is then displayed in the popup.
Kindly suggest, if the below steps for importing MS project is ok or not?
step 1: Create project in MS project with tasks.
step 2: Maintain maping fields of MSP in cProject configurat
step 3: Import MPP file into cProject using "Import" button.
step 4: I am getting the above error while importing the MPP file.
Regards
Srikrishna

Library project errors and imports of projects using them

So this is something that I have put up with in FB for a long time now, but I decided to try doing some research today to see if there is a workaround as it is very annoying. Unfortunately I couldn't find anything.
I attempted to file a bug/feature request, but it turns out that for some unknown reason FB is the only Adobe application that gives a link to another url (http://bugs.adobe.com/flex/) and, today at least, the link is dead so I have to post here instead.
The problem is with library projects (which I love by the way). I use them a great deal and for more than just creating standalone APIs. As do many others, I like to have the core of many of my cross-platform projects in a library so that I can create other ‘harness’ projects for different runtimes and use the same bulk code. This way I can just write code in each master project that is particular to that runtime be it air or web or whatever - this is a great bit of functionality that I would really miss were it not there.
As a result of this workflow however, I am often working in the library project directly in order to update all versions of a project. The problem arises when there is an error in the library project. When this happens, all the projects reading from the library lose all linkages to the swc and as a result the problem tab fills up with hundreds of problems that don’t exist, because as far as those projects are now concerned the swc no longer exists.
Now I understand why this happens but surely FB could be made to understand what is going on and override (what I assume is) the compiler’s behaviour, and just not display these errors.
This whole thing is exacerbated by (and may not even be that big a problem where it not for) the fact that I am forced to turn off 'build automatically' due to the 4.7 crash bug that has been reported here numerous times. Because of this I tend to write large chunks of code between each compile so I don't instantly know what has broken.
Please save the feature that I enjoy so much by either getting FB to deal with the situation better or by fixing the crash bug so I can use ‘build automatically’ again… or god forbid… fix both!! I can dream. J
If anyone has any good tips regarding this please let me know.
Many thanks,
James

Can I then delete the project from the hard drive (as it's now in the library?) or will that delete the whole thing forever?
That depends on how you did import the projects. If your images are referenced they might still be stored in the previous projects, but if your library is managed, then it will be save to delete the projects you already imported.

AppBuilder :Getting Error While importing the Project to Eclipse IDE ?

Hi Experts,
While importing the project from AppBuilder to Eclipse IDE following error i'm getting,
Error : Cordova Activity Cannot be resolved to a type,
Can someone help me to solve this.
Thanks in advance,
Vamsi K.

Thanks ,I have been gone through <Projection Type='System.WorkItem.Incident.ProjectionType">.
Now i am getting many errors while importing data.I have customized fields in servicedesk and i have created same fields in scsm incident form.When i am imported
data i am getting below error.
Please let me know how can i import customized feilds data to SCSM without issues.
Regards, H@ri

Error import Project Folder - java.lang.NullPointerException

Hi all,
I'm having the following problem. When importing a project folder(interfaces and Package), there is the following error message:
java.lang.NullPointerException
     at java.util.TreeMap.compare(TreeMap.java:1188)
     at java.util.TreeMap.put(TreeMap.java:531)
     at java.util.TreeSet.add(TreeSet.java:255)
     at com.sunopsis.graphical.frame.edit.EditFrameSnpPackage.postProgressInitialize(EditFrameSnpPackage.java:1262)
     at oracle.odi.ui.editor.AbstractOdiEditor.open(AbstractOdiEditor.java:188)
     at oracle.ideimpl.editor.EditorState.openEditor(EditorState.java:283)
     at oracle.ideimpl.editor.EditorState.createEditor(EditorState.java:184)
     at oracle.ideimpl.editor.EditorState.getOrCreateEditor(EditorState.java:95)
     at oracle.ideimpl.editor.SplitPaneState.canSetEditorStatePos(SplitPaneState.java:232)
     at oracle.ideimpl.editor.SplitPaneState.setCurrentEditorStatePos(SplitPaneState.java:195)
     at oracle.ideimpl.editor.TabGroupState.createSplitPaneState(TabGroupState.java:103)
     at oracle.ideimpl.editor.TabGroup.addTabGroupState(TabGroup.java:379)
     at oracle.ideimpl.editor.EditorManagerImpl.createEditor(EditorManagerImpl.java:1403)
     at oracle.ideimpl.editor.EditorManagerImpl.createEditor(EditorManagerImpl.java:1337)
     at oracle.ideimpl.editor.EditorManagerImpl.openEditor(EditorManagerImpl.java:1263)
     at oracle.ideimpl.navigator.OpenEditorController.whenOpenEditor(OpenEditorController.java:41)
     at oracle.ideimpl.navigator.OpenEditorContextMenuListener.handleDefaultAction(OpenEditorContextMenuListener.java:51)
     at oracle.ide.controller.ContextMenuListenersHook$LazyContextMenuListener.handleDefaultAction(ContextMenuListenersHook.java:199)
     at oracle.ide.controller.ContextMenu.fireDefaultAction(ContextMenu.java:434)
     at oracle.ideimpl.explorer.BaseTreeExplorer.fireDefaultAction(BaseTreeExplorer.java:1835)
     at oracle.ideimpl.explorer.BaseTreeExplorer.dblClicked(BaseTreeExplorer.java:2176)
     at oracle.ideimpl.explorer.BaseTreeExplorer.mouseReleased(BaseTreeExplorer.java:2205)
     at oracle.ideimpl.explorer.CustomTree.processMouseEvent(CustomTree.java:206)
     at java.awt.Component.processEvent(Component.java:6269)
     at java.awt.Container.processEvent(Container.java:2229)
     at java.awt.Component.dispatchEventImpl(Component.java:4860)
     at java.awt.Container.dispatchEventImpl(Container.java:2287)
     at java.awt.Component.dispatchEvent(Component.java:4686)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4832)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4492)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4422)
     at java.awt.Container.dispatchEventImpl(Container.java:2273)
     at java.awt.Window.dispatchEventImpl(Window.java:2713)
     at java.awt.Component.dispatchEvent(Component.java:4686)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:707)
     at java.awt.EventQueue.access$000(EventQueue.java:101)
     at java.awt.EventQueue$3.run(EventQueue.java:666)
     at java.awt.EventQueue$3.run(EventQueue.java:664)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:76)
     at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:87)
     at java.awt.EventQueue$4.run(EventQueue.java:680)
     at java.awt.EventQueue$4.run(EventQueue.java:678)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:76)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:677)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:211)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:128)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:117)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:113)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:105)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:90)
Can anyone help me?
Regards,
Eduardo Lima

Have you imported all the models used in your interfaces and packages from your source to target repsitories before attempting your import. ODI objects must be imported in a specific order so that all object references are valid. At a simple level: Models first, project objects after, interfaces before packages etc.

How will I resolve -108 error on imovie whenever I try to import my project to dvd?

how will I resolve -108 error on imovie whenever I try to import my project to dvd?

Hi,
There may not be enough free space on your Mac's startup disk to import the dvd project to.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides

Importing a Project outof memory error

Hi all,
When i am importing a project (xml) file which was a 210Mb size.Getting outofMemoryerror .Is there any limitation ???
Any suggestions?
Note: using BI APPS(OBIEE) 7.9.5.2 ODI Project
thanks,
saichand.v

Hi Saichand,
Try increasing the HEAP size in ODIPARAMS.BAT/SH file which reside in <ODI_HOME>/oracledi/bin
set ODI_INIT_HEAP=32m
set ODI_MAX_HEAP=256m
to
set ODI_INIT_HEAP=256m
set ODI_MAX_HEAP=512m
or so.
Where M stands for MegaByte.
If the above solution wasnt work out, upgrade ur Java to 6 or so.
Thanks,
Guru

Error Importing Premiere Elements project into Premiere Pro CS5

Hi,
I am working on a multi-part video project that I started in Premiere Elements 8. I put in hours upon hours of editing on the first part and I found that the more I edited, the more often the program would crash (infuriating!). So I started using Premiere Pro CS5 to produce the second part, resolving to come back to the first part later. Well, I've come back around to needing this first part done, and it is just undoable in Elements (crashes every 20 seconds!). I'd like to import that project into CS5 if possible. The help documentation says this should be perfectly possible... but I'm having no luck.
When I attempt to open my Premiere Elements project in Premiere Pro, it tells me the project must be converted from Elements .prel to Pro .prproj, and I click through the prompts as normal. But then as soon as it starts trying to open the project, I get this:
"The Project could not be loaded. It may be damaged or contain outdated elements."
I downloaded the Premiere Elements 9 trial to see if it would be less crashy (and it is), but I'd really prefer to have all my video in one program, and CS5 does the best job (and has most of my hours invested). Elements 9 opens the "damaged" project just fine and I can edit and export normally, so why can't CS5?
Am I stuck recreating the project from the ground up in CS5?

In very general terms, a contemporary PrE Project (PREL), will Open in PrPro, with the steps that you outlined.
Now, there are all sorts of considerations, for aspects that will not likely work:
Instant Movie/Themes, as PrPro cannot read those
Some Effects that PrPro does not have, like the NewBlue FX
Some Transitions that PrPro does not have
Some Title animation Presets, that PrPro does not have
Do you have any of the above in your PrE Project? There are probably other circumstances, but those are all that come immediately to my mind.
The simpler the PrE Project, the greater the likelyhood that it will Convert to a PrPro PRPROJ file.
PrE 8 and PrPro CS5 should be close enough to work, again in those general terms. I can Open simple PrE 4.0 Projects in PrPro 2.0, but cannot Open PrE 7, 8 or 9 Projects in PrPro 2.0.
Good luck,
Hunt

I am trying to import BPM Project.zip file into Oracle enterpriserepository

I am trying to import BPM Project.zip file into Oracle enterpriserepository from admin tab.
I am getting the following exception. please help if any one know the solution.
Performing import...
Import Failed: Error [100]: An unknown server-side error occurred. Please record stack trace (if available) and contact technical support.
com.flashline.exception.LoggableException: trouble parsing file in import bundle: SampleWScall/activityGuide.agdl
     at com.flashline.cmee.openapi.service.subsystem.impexp.XMLTranslator.decode(XMLTranslator.java:157)
     at com.flashline.cmee.openapi.service.subsystem.impexp.ImportJob.doJob(ImportJob.java:74)
     at com.flashline.cmee.openapi.service.subsystem.impexp.AbstractJob.perform(AbstractJob.java:75)
     at com.flashline.cmee.openapi.service.subsystem.impexp.JobThread.run(JobThread.java:41)
Audit results stored in:
C:\Users\AVINAS~1.YEL\AppData\Local\Temp\import-4705112223687937017.log
Audit for [Import job.] created on [2012-09-24 11:53:59 IST].
2012-09-24 11:53:59 IST - Adding Import job with ID=[50403] to job queue.
Thanks in Advance.

Hi
Why are you trying to import BPM zip file are you trying to configure the out of the box workflows?
They are something that need to be deployed from the process admin on BPM.
There would be the .exp file you would need as its BPM 10g that you would need to use.

Importing web project into Workshop 9.2

Hi,
I'm trying to import an existing web project into Workshop 9.2.1 from my Subversion source. Unfortunately Workshop doesn't recognize this project as a valid web project.
I imported the code project using 'File>Import>Existing Projects' into Workspace.
Unfortunately, I get the following errors:
- "The library module reference : beehive-netui-1.0 is not allowed from the classpath of a non-web project, only JAR,EJB, and EAR module types are allowed."
- "The library module reference : jstl is not allowed from the classpath of a non-web project, only JAR,EJB, and EAR module types are allowed."
How do I tell Workshop that this project is indeed a web project?
Does anyone have any suggestions?
Thanks,
Derrek

Wow.... I figured out a workaround (aka Ugly Hack). It seems that Workshop doesn't properly import Portlet projects. Here's how I got around it:
1. Checkout the code from Subversion
d:\MyProjects\Project\trunk\MyComponent\
2. Move MyComponent to a temp directory
d:\MyProjects\Project\trunk\MyComponent\ --> d:\tmp\MyComponent
3. Open Workshop and create a new Portal project and PortalEAR project of the same name as the MyComponent projects
File>New myComponentPortal
4. Copy over the src and WebContent directories in the SVN directory with the files from tmp.
d:\tmp\MyComponent\src -> d:\MyProjects\Project\trunk\MyComponent\src
d:\tmp\MyComponent\src\WebContent -> d:\MyProjects\Project\trunk\MyComponent\WebContent
5. Refresh Workshop and let the spooky voodoo happen. Viola! Now I've got a running portal project with a SVN connection.

Importing a project from RH 6 to 9

Hi There
I am trying to import a project from RH 6 to 9. I have managed to do it successfully once but when click to Open a Recent file Online Help HHP file I get an error message "No current file". I have tried to Import HTML Help Project I get the same message. Any ideas?
Thanks
Melissa

Opening the .xpj file should just work. Can you provide detailed steps of what you are doing?

Error importing HCM project in txn SXDA

Similar Messages

Maybe you are looking for