Error importing into DVD Studio-"cannot import PAL asset into NTSC project"

I get this message after exporting from FCP the following in Quicktime:
HDV-1080i60 or HDV-1080i50
Are these PAL formats? If so, how do I export HDV in NTSC?
Many thanks

i60 is NTSC and i50 is PAL
You may want to just export them as 10 bit uncompressed (or 8 bit if less room) and encode in Compressor (quicker than HDV) or export as HDV and compress in Compressor or send from FCP to Compressor.
Exporting as uncompressed gives good results and seems to be the quickest on encodes

Similar Messages

Will DVD studio pro convert PAL for an NTSC project

Greetings. I am trying to create NTSC showreels from material that was filmed and captured as PAL. Will importing the PAL asset into an NTSC DVD-SP project mean that it will then encode an NTSC MPEG. Or should I convert the original movie in FCP? I am looking for the solution that requires the least time, as these showreel are needed urgently in the states.
The reason I ask is that as a result of technical inexperience of my colleauges a whole hard drive of PAL assets has been sent to the states in order to make showreels for the production companies directors. This included master Showreel Projects which are in PAL. I am not sure of the best way to unf*£$k the situation but hoped it would be as simple as changing the Disc setting to NTSC. Thanks so much for your help. Also If you know of any sites which could help clear this up with information or software...
Sorry I realise this is a fundamental question
Thanks again
Peter Stenhouse

I'm afraid not. It may even be the case that if you have your project set to NTSC it won't import PAL assets (We do all our encoding outside of DVD-SP and if you try and import PAL m2v's into NTSC project it won't do it).
The PAL assets will need to be converted either professionally by a facilities house which time base correctors and all those doodads or you could try using something like Graeme Nattress's convertor for FCP
http://www.nattress.com/standardsConversion.htm
never used them but heard they bare good (and not too expensive) though time consuming
It may be that you can do it directly in FCP but I seem to remember somewhere that it wasn't very satisfactory. At least you have the advantage that you have PAL resolution going to NTSC res and not the other way (which we have to deal with all the time in the UK - not hugely satisfactory)
Hope this helps
Steve Kirkham

Importing DVD media into DVD Studio Pro 4

Hello all. Here's my quandy.
I recorded some material to a series of DVD's from Betacam masters. The DVD's were recorded on a Sony DVD recorder (dont' know the model off hand) on DVD-R media. I would like to import the material into DVD Studio Pro 4 so I can create a single disc containing all material.
For some reason I cannot import the files from the disc. I used the import command and received confirmation that files were imported but when I tried to play them in the preview window the clip would play for a couple of seconds and then stop cold.
I'm a novice here, so take that into account when telling me what stupid pilot error mistake I'm making. Deal? Thanks.
Marc

What Aldershot said...
If the DVD-R with your clips on was recorded and made into a disc that you can watch in a DVD player then you need to extract the MPEGs from the folders on that disc, which you can then import into DVDSP.
You need to use elementary streams - that is video and audio separate. If you are using MPG files it is likely that they are combined audio and video and will need splitting apart. MPEG Stream clip is one option, another is bbDEMUX which I tend to use more frequently. There are other tools available as well - hunt through Version Tracker or just google for them.
Welcome to the world of DVD!

Is it possible to import a .pdf or .doc file into DVD studio Pro 4?

When I finally finish my 2D animation for my Senior Project and finally make the DVD, I want to include the short story that the animation is based on to the DVD. I want to import it as .pdf or a .doc into DVD Studio Pro 4. What I want to know is, is if this is possible, or if is not, is there another acceptable file format that I can use if .pdf or .doc isn't possible?
Message was edited by: obisgirl

Techincally you can create a link to take it to the file... but there are so many different software DVD players that it doesnt work with 90% of them so its pointless..
as for including your files on the DVD....
First make sure your files are all in one folder called DVD Content or something like that so they know its in that location
then in DVDSP at the top where all the icons are...
hit build and format.
in the general tab you will see...
Disc
Source
DVD-ROM Data
destination
under DVD-ROM Data check the content box.
Choose the folder you have all your files in.
joliet extension support doesnt really matter but i always click it so that windows can identify better what file format it is.
then continue building and formating.
let me know if that works or if you run into an issue.

How can I import .mov file into dvd studio pro?

Hi,
I have a .mov file and want to but a dvd with menu and chapters. But when I try to import the .mov file into dvd studio pro it says Incompatible format. How can I import my .mov file in to dvd studio pro?

Two ways…
Transcode into a codec like Pro Res, import into DVDSP and let it do the encoding.
Or better yet:
Import into Compressor, choose a DVD preset and let Compressor encode. It will make two files, separate video and audio files. Import those into DVDSP.
Good luck.
Russ

Can't import file into DVD studio

Hi we just wrapped up a video which needed closed captioning. The company doing the closed captioning sent us a .SCC extension file which is what I'm supposed to use to embed the captioning into the video it is going along with. Unfortunately when i unzip the file it opens up with Graphics Convertor. I tried to drop it into DVD studio Pro and it won't register. Does any one have any information on working with .SCC extension files and DVD studio
Thanks
Victor

I have had little success importing the .scc files as line 21 captioning. Once the zip is expanded, you can try importing the .ssc file by selecting the track and clicking the "import line 21" button in the inspector. If that does not work, you may be able to convert the data to the appropriate data format for importing as a subtitle stream instead.
hope this helps -
Max Average

Importing IMovie File into DVD Studio Pro 4

I used to be able to import the index file from an IMovie project into DVD Studio Pro quite happily.
Today the application freezes on the import progress window, with no files appearing in the asset window.
I have to force quit the application to get out of it.
Can anyone advise how to resolve this issue ?
Power Mac G5 - Dual 2GHz Mac OS X (10.4.2)

If you haven't changed anything on your system, then it would appear that you have one of two things.
Most likely, your preference files have be come corrupt, or second, your Application or application resource file for DVD SP have become damaged.
Try first to toss your DVD SP preferences, if this doesn't do it, then you should uninstall DVD SP and then reinstall with all of the updates before trying again.
If you have tried creating a new project from scratch and the problem persists, then read on.
If that doesn't do it, then there's a very slight possiblility, that there may be an issue with the QucikTime files of the OS, and keep in mind, (this is a very remote possibility) you may have to wipe the drive and reinstall the OS and apps. from the original disks, but only after everything else fails, (THIS IS A DRASTIC LAST DITCH EFFORT.)

Importing subtitles into DVD Studio Pro 4 that were created FCP Studio 6

Greetings!
So in all the DVD Studio Pro 4 documentation, I couldn't find any work flow that allowed you to create subtitles, via *Text or Boris 3D Titles* in Final Cut Pro Studio 6 and then export or import your work into DVD Studio Pro to be used in the subtitle fields... Is that possible?
After painstakingly entering in subtitles for a feature film line-by-line, timing them perfectly to picture and making them look beautiful with crisp-text & a slight drop-shadow... It would be wonderful to import those files (as graphics files? DVD Studio Pro can import those...) in our DVD for release, with optional subtitles-- Instead of making/encoding 2 versions; with & without subtitles.
What is the best way to export these files, created for the film subtitling in *Text or Boris 3D Titles* so that we can import them into DVD Studio Pro 4 subtitle tracks... Could they be exported with an Alpha Channel so that the background is transparent? And will this then be excepted into DVD Studio Pro 4 to be placed in the subtitle fields?
Please help us conquer this seemingly-necessary procedure... I would really hate to think that to achieve this task we'd have to re-enter, re-design & re-time ALL subtitles to make our DVD... All of your suggestions would be most appreciated.
Thanks,
Jason

OK-- I love that I've found a way to answer my own question on this forum (but actually I must credit my buddy James for finding out about 'TitleExchange Pro') It looks pretty cool and should do exactly what I've asked about: Exporting/ Importing subtitles made in FCP to DVD SP...
TitleExchange Pro is a unique tool which makes complicated things simple.
If you ever wished to get your titles out of FCP into DVDSP (or another DVD authoring application), get titles into FCP from another source like DVDSP or STL, or ceate a QT with all your FCP subtitles without the need of rendering (and get automatic selection of language) or just "equalize" your FCP titles TEP will be the right tool.
There's a slight catch but it might be worth it, if this works as well as it states...Cost 135 EUR:) You can download a limited demo version that works for 30 days & 50 titles...If anyone wants to give their feedback on this software, please post it here-- We'd all be interested.
Download & more information about this process at: http://www.spherico.de/filmtools/TitleExchange/
Also, check out this video tutorial on the product... It explains exactly how to do the task-at-hand... http://www.studiodaily.com/main/minisites/finalcutpro/f/mtutorials/6851.html
Hope this finds you all well--
Peace,
Jason

Screencam quality imported into DVD Studio

Hi, I am relatively new to DVD Studio Pro,
and are currently developing a training DVD that utilises screen cams captured using IShowU. These have been captured using the Apple Intermediate Codec, transferred and edited in FCP , output via Compressor (have also tried QT Compression Export) using the DVD codec Best 90 minutes to generate the file for DVD Studio Pro.
They look great out of FCP and in QT but when they import to DVD Studio Pro the text is blurry, images have jagged edges. this only the case for the screencams. The Motion menus look great.
I have tried many compression types, different size screen capture settings and none really show much improvement. Am I missing something very fundamental?
thanks for your help
Mark

You can set your display to 640x480. That way you will not have any surprises, what you see is what you will get. If you work at a higher resolution, it will need to be converted down, so you will not know what it looks like until after compression.
An alternative which some people use is to work at a higher resolution. All of what they want to capture is in the upper left corner working down and right. They don't need the dock or anything on the far right of the screen. So they create a special background that has a 640x480 box that starts in the upper left corner. They then only work within that box and only capture within that box.

Import/convert 544 x 576 resolution into DVD Studio

I've been successfully transferring UK DTT (DVB) recordings from my Topfield PVR onto the mac (via Streamclip) into DVD studio 4.
However, some channels are now transmitting files in 544x576 resolution which are non DVD compliant.
DVD Studio (or Compressor) accepts them. I can patch them with DVDPatcher on the PC into a compatible format but they fail to open in DVD Studio. Using the same patched file on the PC in DVD Author works.
I've tried patching the header and the whole file with no luck. Can anyone help me to sort this. I have no desire to move to using a PC for this operation.
Thanks
Phil

Hi Philip,
And welcome to DVDSP form.
Mpegs are funny beasts. And DVDSP does not recognise them all. THe main issue with them normally other than the quality is the written header.
My suggestion is to try and find an application which will parse your mpegs (that is the corrected mpegs) into something DVDSP is happy with.
The obvious ones which come to mind are Mpeg Streamclip and Mpeg Append Suite, Quicktime etc etc.

H.264 HD MOV file in dvd studio not importing?

I have an H.264 HD video (1,440 x 1080, 16 x 9). I was able to import into FCp and export out to quicktime successfully yet when I attempt to import this file into DVD Studio it shuts down as it tries to import, throwing an error? Any ideas.

I'm having the same problem when attempting to produce an HD DVD as recommended by Rick Young.
I have no difficulty in burning an HD DVD using MPEG compression, but I'm unable to get DVDSP to accept an H264 file created using compressor (H264 for DVDSP setting). The .mov file when brought into DVDSP4 is seen only as an audio file; it plays as video in QT and also in iDVD as expected. Can anyone point me in the right direction, please?
Geoff

I am trying to upload my photos to iphoto. I keep receiving a error message that say "Iphoto cannot import your photos because there was a problem downloading an image" What do i Do?!

I am trying to upload my photos to iphoto. I keep receiving a error message that say "Iphoto cannot import your photos because there was a problem downloading an image" What do i Do?!

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Aperture stills importing to DVD Studio Pro

apart from loading all my aperture library into iPhoto (and that generates loads of extra files on the drive), is there a way to import stills from Aperture into DVD Studio Pro? There seems to be an iphoto or a file browser input but nothing from Aperture. Any ideas folks?

Have you tried dragging the folder of stills from the finder into the DVDSP assets tab?

Exporting 16:9 file to quicktime and importing to dvd studio pro

Please help I am using final cut 7. I just exported a Dvd anamorphic movie file to quicktime file. The completed file is a 4:3 where the anamorphic image is squeezed. When I import into dvd studio pro to burn a dvd it stays as a 4:3 file and is then being encoded as 4:3.
When I exported the file from final cut i used current settings ( as in my final cut audio video settings it is DV anamorphic)
How do I export retaining the 16:9 ratio?

In DVDSP, in the graphical view, click on the track to select it, and look at the the track inspector (menu View > Show Inspector). Make sure the track Display Mode is set to 16:9 Letterbox. This will play the track full screen 16:9 if played on a 16:9 TV, and will automatically letterbox it if played on a 4:3 TV.
MtD

Mpeg4 import in DVD Studio 4

alright, last question (I hope).
I've created a new movie in mpeg4 format. It's a "imovie.m4v" format. When I try to import this file into Dvd Studio 4 it only brings in the audio. So, here's the question: How can I bring in the whole movie?
Thank you.

DVDs only play MPEG-2 video, so there is no point in having your video in MPEG-4 format. In fact, since MPEG is such a highly compressed format, compressing it to MPEG-4 and then compressing it to MPEG-2 will result in double compression, which is a guaranteed way to loose quality. Go back to your original, uncompressed video and then compress it to the correct format, MPEG-2.

Error importing into DVD Studio-"cannot import PAL asset into NTSC project"

Similar Messages

Maybe you are looking for