"Error Importing Library: The library could not be imported because it is from an out of date version of Aperture 3. Please upgrade the library to the latest version of Aperture 3 and try again." Help.

I'm getting the following Error message when trying to import some of my folders from my external hard drive. This is not happening with all of my photos. How can I access my photos? I now have Aperture 3.5, but I'm guessing I exported those with an earlier version of Aperture 3? I have a Mac Book, OS X 10.9
Thanks!

My advice is for libraries, not vaults.
To be able to use a vault, you have to restore the library from the vault and then open the restored library.
To restore the entire library from an external backup disk
Connect the hard disk drive that contains the most up-to-date vault to your computer and open Aperture.
Choose File > Vault > Restore Library.The Restore Library dialog appears.
Choose Select Source Vault from the Source Vault pop-up menu.
If necessary, navigate to the vault from which you want to restore, then click Select.
Click Restore, then click Restore again.

Similar Messages

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". need help

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". But when I have my external hard drive plug in the song will play with no problem. What do I need to do to play my music without having the external harddrive plug in ???????? Please help

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

Hello Sir I have an iPhone 4 and when i updated that it got updated but now for restore the data it is showing me the message The "iPhone" could not be activated because an unknown error occurred (0xE8000004). Please try again later. please help me.

Hello Sir I have an iPhone 4 and when i updated that it got updated but now for restore the data it is showing me the message The "iPhone" could not be activated because an unknown error occurred (0xE8000004). Please try again later. please help me.

Hello Amarchand Sharma,
Are you working with a Windows computer? If so, the resource below may help you troubleshoot the issue you are having restoring your iPhone.
iOS: Unknown error containing '0xE' when connecting to a Windows PC - Apple Support
http://support.apple.com/en-us/TS3221
Regards,
Judy

My partner deleted my itunes (10) library. I use a WD external back-up and retrieved my itunes library, but when i try to play a song i get the message 'could not be used because the original file could not be found Would you like to locate it?'

My partner deleted, by accident my itunes library. I have an iMac 10.6.7, Itunes 10. I use an WD passport as an external back up and retrieved my itunes library but now get the message "could not be used because the original file could not be found. Would you like to locate it?" so itunes is not recognised the exclamation marked songs, how do i get the retrieved files recognised. At times I get fed-up with Apple blocking files being used, although I like the product its restrictions are so silly!

You not only have to retrieve the library file from the backup drive but the actual music files (usually stored within the "iTunes Media" folder) as well.

After installing iTunes 10.5 update i get the following message when trying to play any song in my Library "The song could not be used because the original file could not be found. Would you like to locate it?" how do i fix this??

I have an iPod Classic and work on Windows 7.
i recently installed iTunes 10.5 update and since then i cannot play any of the songs in the Library - i get the following message
"The song could not be used because the original file could not be found. Would you like to locate it?"
what happened to all my songs (almost 2000) How can i get them back into my music library?
Please help - i do not want to spend another week downloading all my cd's onto my computer !!!!!

Try my script FindTracks. Select a few of the missing files to start with then run the script. Choose No at the first prompt so that you can check how it works track by track, then confirm or edit the location of the media folder where your files are. Once you are happy with how it behaves let it process larger numbers of tracks automatically.
tt2

I have a problem with my itunes. I cannot transfer apps from the itunes to my iphone 4s. Any time I try to snyc itunes tells me "The iphone could not be synced because this computer is no longer authorized for purchased items that are on this iphone. HELP

I have a problem with my itunes. I cannot transfer apps from the itunes to my iphone 4s. Any time I try to snyc itunes tells me "The iphone could not be synced because this computer is no longer authorized for purchased items that are on this iphone. To authorize this computer for items purchased from the itunes store, choose, Store > Authorize This Computer. But anytime I authorize it tells me you have authorized including this computer 2 out 5 computers. And if I try again the same story over and over again. But I have many apps on my itunes which I want to transfer. Please someone help me.

Well Authorize the Computer...........

I have a new computer that downloaded all of my playlist. but i cannot play all songs. i get a error that say "the song could not be used because the original file could not be found. would you like to locate it? but it does not help to resolve.

i installed itunes to my new computer and transfered all my playlist from the older computer. the software came with the new computer hp link up. the problem
comes in where i want to play a certain song on a playlist and this error pops up "the song could not be used because the original file could not be found.
would you like to locate it? which is of no help.
is there a solution to this problem?

The file path for these songs IS NOT correct per your iTunes Library file.
See: http://dougscripts.com/itunes/scripts/ss.php?sp=listmias for an Applescript to locate these files for re-adding.

When accessing my itunes library of music I get the notation on all songs ...The song could not be located because the origional file could not be found...how can this be corrected or did Apple wipe out all the files

wien I access Itunes I get the notification....the song could not be located because the origional filoe could not be found...I have over 2000
songs in my library ....Does this mean they are all gone....How can one retrieve them???

This missing song thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
Once you've sorted out the broken links I've written a script called DeDuper which can help remove unwanted duplicates. See this thread for background.
tt2

I cannot play music from my itunes library. I keep getting an itunes message that says, "The song could not be used because the original file could not be found." Is there a fix for this? Thank you.

I cannot play music from my itunes library. I keep getting an itunes message that says, “The song could not be used because the original file could not be found.” Is there a fix for this? Has this happened to anyone else? Is there a fix for this? Thank you.

Hello Turintest2,
I am having a similar problem. I have over 4000 songs giving me this error. I certainily don't want to go in one by one and find them. I know you wrote a script for Windows but I am a Mac user. Is there a fix for me? Here is the info on where the song is currently (used by doing the get info)
Here's a shot of my preferences:
Just FYI, I know that apparently iTunes is looking for this music in the trash. However, if I go here:
Then I find the music there as well. (Which is where it is in my preferences.)
Please help! I don't want to have to go through over 4000 songs and update them one by one.

I get the following message on certain songs in my library: the song could not be used because the original file could not be found

I get the following message on several songs in my library: the song could not be used because the original file could not be found. How can I download these songs to my new iPod?

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Since i download the new version of i tunes i canot play the songs of my library...it say that "the song could not be used because the original file could not be found" what i do to just play the songs directly? please someone help

since i download the new version of i tunes i canot play the songs of my library....it say "the song could not be used because the original file could not be found".
would you like to locate it.i just want to play directly..what i do? please help thanks

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

HT4489 I cannot import my vCard to iCloud...it shows error.."1 contact could not be imported because there was a problem reading the vCard"

I cannot import my vCard to iCloud...it shows error.."1 contact could not be imported because there was a problem reading the vCard"

The vCard must not be a compatible format. (Unfortunately, there are multiple formats.)
Often your carrier can transfer contacts between devices from different manufacturers. Try visiting your carrier's retail outlet and see if they can do this for you.

I am having trouble dating to version 3.6.14. I am running Linux/Ubutu OS and I get this error message:/tmp/p7x3vko2.part could not be saved, because the source file could not be read. Please help. Thank you , Deb

I am having trouble dating to version 3.6.14 or updating to the Beta testing. I am running Linux/Ubutu OS and I get this error message:/tmp/p7x3vko2.part could not be saved, because the source file could not be read. Please help. Thank you , Deb

Solved for me.
I set the owner/permissions of my profile's mozilla folder's (and all the files in it) to read/write access, and the problem disappeared.
in linux:''
* cd /home/myusername/.mozilla
* chown -cR myusername:mygroup ./
* chmod -cR +rw ./
'''Never do that with root privs (nor with sudo)'''

Please help i can't share my project I did try in all of them and it doesnt work it apears like that........ The share operation Master File has failed The operation could not be completed because an error occurred when creating frame 608 (error -1). and

I did try in all of them and it doesnt work it apears like that........
The share operation Master File has failed
The operation could not be completed because an error occurred when creating frame 608 (error -1).
and i dont know what to do plese hlp me....
Re: when i try to share my project to quicktime aroun 50% appears error -1 and i can't share it what to do please help

Double post…

Error message the disk could not be written to or read from.

Every time I try to synchronize my shuffle,I get the message that attempting to (I forget what it said exactly) failed, the disk could not be written to or read from.
To synchronize it I have to reset the shuffle using the reset utility and then only it synchronizes automatically(for the first time only and not again).
Is there a way to resolve this?
Thanks a lot for any help.

I get the same thing. I bought 2 of them today and both are now doing the same thing.
When I first hook it up it asks me to name it then if I want it to grab music from my itunes. If I say yes it does and shows the songs in iTunes. All works good. The problem comes in when I try to remove a song or change them. That's when I get the error.
If I reset using the ipod reset utility it blanks it out, has me name it, then asks if I want it to pull music from iTunes automatically. If I say no then it appears blank on my iTunes. Which it should. I then try to drag a music file over or hit autofill and it waits a while then says the same error message. It shows the music in my shuffle until I disconnect it. Once I re-connect it then it shows blank again.
So right now the only way I can get music on it is to use the reset utility. Name the Shuffle again. Have it automatically grab the music from iTunes...and can then never edit the music.
I am using iTunes 7.1.1.5

"Error Importing Library: The library could not be imported because it is from an out of date version of Aperture 3. Please upgrade the library to the latest version of Aperture 3 and try again." Help.

Similar Messages

Maybe you are looking for