Error importing Nikon D800 RAW files into Lightroom 4.4.1

Hi folks,
I got an Nikon D800 and tried to import the RAW files taken with it to my Lightroom 4.4.1 installation on Windows 8.1 64bit.
Lightroom info:
Lightroom version: 4.4.1 [908273]
Operating system: (Build 9200)
Version: 6.2 [9200]
Application architecture: x64
System architecture: x64
Logical processor count: 4
Processor speed: 3,9 GHz
Built-in memory: 16321,7 MB
Real memory available to Lightroom: 16321,7 MB
Real memory used by Lightroom: 1042,6 MB (6,3%)
Virtual memory used by Lightroom: 1032,2 MB
Memory cache size: 0,0 MB
Maximum thread count used by Camera Raw: 4
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1920x1080
I do get an error like this while trying to import the files:
And then when I try to import them I get an error screen.
The files can be viewed with irfanview so they should not be corupted.

Have you used any Nikon software with them, perhaps an older Nikon Transfer or View NX? These are known to make newer Nikon camera’s files unreadable by Adobe products.
On way to test would be to take a new picture and move it to your hard-drive using either your OS-level functions (Finder/Explorer) or LR, itself, directly from the card, perhaps in a card reader.
The utility, here, can reverse this obsolete-Nikon-software corruption:
http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html

Similar Messages

Cannot import sony arw raw files into lightroom 5

How can I import sony arw raw files to lightroom 5. On Import I cannot convert them to dng.

What camera?
What version of Lightroom?
What is the exact complete word-for-word verbatim error message?
What exactly do you see on your screen anyway when this is happening? Describe in detail.

Importing Nikon NEF Raw files into iPhoto

Recently I purchased a Nikon D810 camera and have been trying out various settings to determine the quality of picture I can get. As a way to run through the test, I took pictures with different RAW (NEF) settings. I also took pictures in JPG format for comparison.
What I have found is that iPhoto (version 9.6) will import all of the JPG files but only the RAW files taken in the Large 14 bit or Large 12 bit format. It will not accept the RAW Small photos.
Has anyone run into this problem? And, if so, any ideas about how o address this?
I am using a Mac Pro for this work.
Thanks.

That is what Apple's RAW support page says, so you can do nothing about it:
OS X Yosemite: Supported digital camera RAW formats - Apple Support
See the footnote at
Nikon D4S†
Nikon D810†
Notes
†Nikon RAW L format only.

Lightroom 4 corrupting Nikon D800 RAW files on import

Has anyone experienced Lightroom 4 corrupting Nikon D800 RAW files on import?

How do you know they aren’t corrupted before you import, or the old one wasn’t already corrupted and you just regenerated the preview and could then see the corruption where what you saw, before was from the preview cache and not the current image?
Is the corruption a problem with the Previews or does LR actually choke on the file and say it is unreadable or show you a gray thumbnail or pixilation starts halfway down the photo.
Can you prove the files were intact coming off the card and only are corrupted after importing into LR? Can you get to the originals on the card, still?

Problems importing raw files into Lightroom 3.4

I've just dowloaded lightroom 3.4 and now I'm having problems importing raw files into lightroom. I havent had a problem before. Can anyone help me? My camera is a Nikon D7000.

Perhaps a few more details are required. Take a look at the FAQ "How to get help quickly"

I can't import raw files into lightroom

I have been using lightroom 4. I shoot with a nikon d300s. I recently used a nikon D610 and now it says preview not available. It also says the the raw images aren't able to import. So I recently upgraded to Lightroom 5 and it still says preview not available. I need some suggestions on how to import them.

I don't use nikon software. I just use lightroom. I just got lightroom 5. I tried to update to 5.3 but couldn't find the location where to find it.
Sent from Yahoo Mail on Android
From:"dj_paige" <[email protected]>
Date:Thu, Apr 23, 2015 at 10:22 AM
Subject:[Photoshop Lightroom] I can't import raw files into lightroom
I can't import raw files into lightroom
created by dj_paige in Photoshop Lightroom - View the full discussion
Do you have Lightroom 5.3 or higher?
Did you use Nikon software at any point on these photos?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7470470#7470470 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7470470#7470470
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Can't load Raw files into Lightroom 3 form my Nikon D7100

Can't load Raw files into Lightroom 3 form my Nikon D7100... Why?

TGTruman wrote:
How do I convert the Nef to DNG files...
Download the Adobe DNG Converter (and install it, and run it...).
Note: an internet search will reveal a link in short order.
TGTruman wrote:
I don't mind going to LR5, just don't want to spend the money and then not have it work...
So use the trial first. No?
R

ACR 7.0 in Released version of CS6 doesn't open Nikon D800 raw files.

The ACR 7.0 that installs with rhe released version of Photoshop CS6 still won't open Nikon d800 raw files.

Noel - I do use a card reader and always have! I don't go direct from the camera. As I point out, I am working around the problems that are stated above and I am here forcing myself to learn by asking those questions. Thanks though. I’m not ignoring anyone if I were I wouldn’t have all the comments above.
Jeff - I mentioned that I'm a teacher and need to know what I'm doing with the software. Sorry for the attitude.
I am an artist before a teacher it’s just that I like to be proficient when I teach (google me).
Why do you feel such animosity towards education? I’m really sorry I posted here at all.
ssprengel -
I am equally as surprised and not blaming LR4 just making an observation. I have used LR for years and manage a library of over 60,000 images with it. It is my software of choice and will continue to be. But this has become a persistent problem only with the D800 14bit NEF +- 45MB files, all other files from my Nikon DX cameras and my Canon cameras are fine. I’m not blaming LR4 it could also be the Nikon NEF, I just don’t know why LR4 truncates the D800 files and other software doesn’t.
- if I move files using Nikon ViewNX 2 or Windows7 Explorer the files simply move without problem. When I move them using LR4 they become truncated (no end of file error message). If I move them with LR4 and then copy over them into the new folder with the original copy, LR4 corrects and is able to deal with the file in their new destination. (this means a lot of extra work and saving the originals in another directory LR4 doesn’t see).
It's confusing. I have reinstalled LR4 3 times already and checked the hard disks. The bottom line is that both Windows and ViewNX will move the file without altercation. I don’t know why? Yet further confusion. Please realize that I am aware this may be an isolated issue and I intend to ask one of the college techs. to look at the problem.
I am not attacking Adobe, I only use Adobe products with my images and I want it to work that’s why I came here in the first place. I have a lot of money invested in Adobe software both here and all our other licences. Please stop using words like blame, reporting an issue is not blaming. Don’t shoot me I’m just conveying my current (personal) experiences with the product. I’m trying to figure out why and how to make it work.
This is my last post on this thread. Thanks a lot for all your help. I remain a faithful Adobe client and appreciative of all your kind remarks and assistance above.

Can i open and edit nikon d810 raw files in lightroom 4.4

can i open and edit nikon d810 raw files in lightroom 4.4

No. Lightroom 4.x will never be able to open Raw files from the D810.
D810 support has only just been added to the RC version of Camera Raw 8.6. It is never retrospectively added into older versions.
Adobe Photoshop Camera Raw 8.6 RC for CC and CC 2014 Release Candidate | digital camera raw file support - Adobe Labs
Adobe will probably add D810 support to the next version of Lightroom.
Either way you'll have to upgrade to Lightroom 5 to be able to open D810 Raw files in Lightroom.

Nikon D800 raw files "unsupported image format".

I've a problem with Nikon D800 raw files "unsupported image format".
I've just upgrade to mountain lion with no success.
also aperture seems the last version
only Nikon software seems to work
thank you
Andrea

Hey Andrea
sorry for the late reply. Have been on some working holidays
My setting is : typ>>>> no
bit>>>> 14
The only information, which is not transmitted is the adjustment level of the AF-finetuning
Good luck and hope it works meanwhile also with your camera
:-)) FJ

Hi, I just downloaded a bunch of RAW files into Lightroom 5.6 and they all look like they've been put through acid. Can someone please help? TYVM!

Hi, I just downloaded a bunch of RAW files into Lightroom 5.6 and they all look like they've been put through acid. Can someone please help? TYVM!

Jim and Rob, thank you for taking your time to respond. I have a mac & a pc with 4 gigs of RAM in each. I originally experienced the problem on my mac and afterwards the same thing happened on the pc. I shoot with a canon 5d mark iii and never had this problem before, but what I'm realizing is that I'm running out of space on both the mac & the pc. After an afternoon of shooting today, I filled up a 32-gig card, so my TB hard drives are filling up ridiculously fast. I need to drop some load off both drives and reboot. Hope this will resolve the issue as I really don't think it's a canon-LR problem (I'm using the most updated 5.6 version). Again, thanks for your input. I'll keep you posted.

How to import Nikon Nef (raw Files) ?

Hello
I'm having problems importing Nikon Nef Raw files, PSE9 is displaying the message The file is damaged or file format
cannot be included. Any suggestions please.

You are going to need Adobe Camera Raw 6.3, but the only version that has been released is the Version 6.3 Release Candidate, which I don't think can be installed with PSE. You will have to wait until the final version of Adobe Camera Raw 6.3 is released.
The only workaround is to use the Version 6.3RC DNG Converter to convert your RAW files to DNG files, which can then be accessed by PSE.

My nikon d3s raw files in lightroom have color shifts

my nikon d3s raw files in lightroom have color shifts in lightroom can anyone help me please?????

An answer to "when do you see it?" would also be helpful, just in case it relates to: http://forums.adobe.com/thread/358016

I have a new camera and cannot import RAW files into lightroom.

I have a new Sony NEX 5 and have tried importing the ARW files into lightroom. The files are recognized when I import photos from device. When I choose the .arw files to import, I receive an message "unknown errors occurred" and files won't import. I have never had a problem importing files from a card or directly from my older camera. Any suggestions?

Check here to see if your camera is supported yet.
If its a camera launched in the last month it won't be. But you can try LR 3.2 RC and see if it has been added. Otherwise you will have to wait until LR supports the format. This is a problem caused by manufacturers constantly using their own formats which require Adobe to investigate every new format before adding it to LR. In 99.99% of the cases the so called new format from the manufacturers is just a line of code with the name of the camera in it. You can use a EXIF editor tool (just google, lots of free ones) to change the name in the RAW file to one presently supported and then convert to DNG. If you do go down this road then ensure you also keep a copy of the original files just in case something has actually changed.
If you are still using LR 2.7 and the format you need was introduced with LR 3 you don't need to upgrade, you can just use Adobes standalone converter to convert the files to DNG and then import them.

Problems downloading RAW files into Lightroom 4 from a 70D camera.

I had a canon rebel xsi and had been able to download my RAW files to lightroom 4. However, I have recently bought a 70D and is won't download into Lightroom 4. I have been told that Lightroom 4 doesn't support the 70D and I have to upgrade to Lightroom 5. Is this correct, or can I get some kind of plug in? Also if Lightroom 5 how much would it be for me to upgrade, is an "upgrade" cheaper to someone who has already got Lightroom 4.

Once you buy LR 5 you can install any of the LR 5.x versions where LR 5.7 just came out and supports the newest cameras, like the Nikon D750 or Canon 7D Mark II along with all earlier models.
It would be wise to download and install the LR 5.7 as a trial and make sure it works for you before buying the upgrade. The minimum OS is 10.7 and Win 7, I think, so if you’re on XP or Vista or OS X 10.6 then you’re out of luck.
The various version of LR are available on the Adobe Updates site: http://www.adobe.com/downloads/updates/
They will run in trial mode for 30 days or until you enter appropriate serial numbers.

Error importing Nikon D800 RAW files into Lightroom 4.4.1

Similar Messages

Maybe you are looking for