Error importing opml file exported from iTunes

Seems like this should work...using iTunes 7 on Windows. Exported podcast list from my home computer to Podcasts.opml file which is then copied to my laptop,
On my laptop which has a brand new install of iTunes (no music etc.), click import, select the Podcasts.xml and get
The file "podcasts.opml" cannot be imported. An unknown error occurred (-123).
Essentially I just want to update my podcasts onto my iPod while on the road.
Any thoughts?
Thanks
Marc

Gave up.

Similar Messages

  • Illustrator error opening eps file exported from sketchup pro 8

    When I attempt to use Illustrator CS6 to open an .eps file exported from Google Sketchup Pro 8 I get the following error message "the file is an unknown format and cannot be opened".    If I try to place/link the file I get this message "can't place the illustration. Could not set a position inside the file."  Any thoughts on why I'm having this issue?  Is there an eps version compatibility issue I should be aware of?

    Hi Mike.  Here is the screenshot you requested.

  • How to import a *.dmp file (exported from 10g) to 8i database?

    Hi everybody!
    Could anybody tell me how to import a *.dmp file (exported from 10g) to 8i database?
    I have tried but it seemed to be error "wrong version".
    Thanks a lot!

    From 10.1.0 to 8.1.7 => Use the EXPORT 8.1.7 to export the data from the 10.1.0 database and IMPORT 8.1.7 to
    import the data into the 8.1.7 database.
    Metalink note 132904.1 Subject: Compatibility Matrix for Export & Import Between Different Oracle
    Nicolas.

  • Importing playlists that were exported from iTunes as text

    I need to re-import playlists that I exported from iTunes. When exporting them I didn't notice the format selector, which defaults to .txt format. iTunes requires .m3u or XML for playlist import. How can the information in these files be imported (including getting it into a compatible format)?

    That is indeed the procedure for importing playlists. Been using it a lot, trying to get these playlists to re-import.
    iTunes requires .m3u or XML for playlist import. iTunes doesn't import playlists in text (.txt) format, even though that's the default format when you export them.
    If I'd run an import immediately after exporting a playlist I'd have caught this. But who would expect that iTunes might not accept its own default playlist export format for playlist import?
    The problem: how to extract and use the information in the text files iTunes exported.

  • HT4489 Hi all, I have .vcf contact file exported from yahoo and need to import it to cloud. When I try to import it I get an eror "53 contacts not imported, eror reading vCards". Pls help ty

    Hi all, I have .vcf contact file exported from yahoo and need to import it to cloud. When I try to import it I get an eror "53 contacts not imported, eror reading vCards". Pls help ty

    1 - Select  the thumbnail of one of the problem photos and use the File ➙ Reveal in Finder ➙ Original menu option.  This will take you to the folder containing the original file with that file selected by the Finder. 
    You can also use Find Any File to search for that file (get the file name from the Info pane in iPhoto). You will find the thumbnail version and maybe an edited version also.  Made sure what is found is the large, original version and note were it's located.  Search all of your drives with FAF just in case.
    If you don't fine the full sized version then the only recourse is to use a file recovery application like   SubrosaSoft FileSalvage on your drives to see if any of your full sized photos can be recovered.   If you find enough files to make the purchase of the software worthwhile buy it and recover the files.  However, since it may have been quite a while since you discovered the missing originals it seems unlikely you'll be able to recover any due to being overwritten.
    2 - book projects are just entries in the library databases and can't be exported to another library. 

  • Can't visualise text on PDF files exported from PS

    PDF files exported from PS (levels included as we need them to be selectable) have corrupted text. When opening the saved pdf file, a part of text doesn't appear. It is usually starting from the second chapter of text. Any idea of how to solve this problem?

    Hi Marco,
    For now we have only fixed this in CC, but we are aware this problem also affects CS6 users and is a significant problem for many people. At this time, I don't know of any workaround in CS6 for this bug other than to break text up into smaller blocks or use another more text-oriented application like InDesign. While I can't comment on future releases, your feedback on this issue is important to us, and I can say, "there's always hope"...
    If you'd like to discuss this further, or send us a file that exhibits the problem, please contact me directly. My email address is my last name @ adobe.com.
    Paul

  • Error while reading file entries from the database

    Hi there,
    We are running a instance of xmii 12 in a VM (VMware) and after somebody shutdown the host machine without shutting down the VM (great idea isn't it?) we keep getting this message when trying to access xMII:
    "Application cannot be started.
      Details:   com.sap.engine.services.deploy.container.ExceptionInfo: Error while reading file entries from the database."
    Any clue? Any suggestion on how we can recover from that?
    Thanks a whole lot,
    Dom
    Server log:
    #1.5 #000C29A3B1F20002000000C400000F2800044829A35270F8#1205243578005#/System/Server##com.sap.engine.services.dbpool.deploy.ContainerImpl####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.dbpool.deploy.ContainerImpl#Plain###DataSources or DataSource aliases of 'sap.com/tcmonitoringsysteminfo' application started successfully.#
    #1.5 #000C29A3B1F20002000000C500000F2800044829A3527A6C#1205243578005#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###application [] Start of application [sap.com/tcmonitoringsysteminfo] finished successfully on Web Container.#
    #1.5 #000C29A3B1F20002000000C600000F2800044829A3527DB5#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation startApp over application sap.com/tcmonitoringsysteminfo finished successfully on server 305221750#
    #1.5 #000C29A3B1F20002000000C700000F2800044829A3527E03#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation startApp on application sap.com/tcmonitoringsysteminfo finished on current cluster node for 221 ms.#
    #1.5 #000C29A3B1F20002000000C800000F2800044829A3528B49#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Error#1#com.sap.engine.services.deploy#Plain###Error occurred while initially starting application sap.com/xappsxmiiear:Error while reading file entries from the database.#
    #1.5 #000C29A3B1F20002000000CA00000F2800044829A352922B#1205243578015#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###The synchronization of applications with DB completed for 39304 ms.#
    #1.5 #000C29A3B1F200040000000200000F2800044829B290A4F8#1205243834341#/System/Server/SLDService##com.sap.sldserv.DataCollector####n/a##0da42150ef7311dcb908000c29a3b1f2#SAPEngine_System_Thread[impl:5]_7##0#0#Warning#1#com.sap.sldserv.DataCollector#Plain###Communication configuration is incomplete. No data transfer possible until corrected.#

    Well thanks for the hint. Actually, the DB was up but corrupted. I managed to solve the bug by re-deploying xMII (using the SDM tool) which kept all my data but redeployed both the config db of (x)mii and the class files.

  • Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Hi Memalyn
    Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
    My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
    If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
    Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
    Let us know what you find out, and if you manage to get your space back.
    Matt

  • Aspect ratio issues in iDVD with mov files exported from FCE

    Please help. I believe this is an iDVD bug. I have found some relevant discussion of it on online forums - but have not found a solution that works for me. I am looking for a workaround.
    http://discussions.apple.com/thread.jspa?threadID=1356500&tstart=31
    PROBLEM STATEMENT:
    My 4:3 movies, exported from FCE in QT-with-conversion formats (any 4:3 format) - appear in iDVD with gray side-pillars (as expected for 4:3) AND with a black line (letter-boxing) at top and bottom - as would be for 16:9. It appears the aspect ratio is also distorted i.e. 16:9. (The iDVD project is set to 4:3.)
    1- A 4:3 mov file exported from FCE using Quicktime Movie format (no conversion) does not have the problem, but I cannot de-interlace the video using this export mode.
    2) A 4:3 mov file exported using QT-with-conversion mode (any 4:3 format) DOES have the problem. I need to use this mode in order to get de-interlace.
    (Exception: 640x480 VGA mode does not have the black lines, and it displays correctly in dvd player on my computer screen - but on the TV screen, it crops content from the top and bottom of the movie, so this is not an option.)
    3) In Finder, if you click on mov file exported QT-only (no conversion), it opens in the FCE viewer. If you click on mov file exported in any other 4:3 mode, it opens in Quicktime viewer (i.e. there is absolutely something different in the header/ID of these files.)
    4) All mov files, regardless of export mode, show correctly in Quicktime viewer - no black line, no distortion. The problem does not occur outside of iDvd.
    5) I tried passing the QT-with-conversion mov files through an Inverse-Anamorphicizer (per suggestion on forum - this apparently fixed the problem for some people) but the resulting output mov (i.e. the inverted product) still had the same problem.
    I am, so far, left with this trade-off: Give up the de-interlacing, or live with the letter-boxing/ distortion. Neither is acceptable.
    I am looking for a workaround:
    1) A way to export de-interlaced 4:3 mov from FCE that shows in correct ratio in iDVD
    2) A way to "convert" / re-head mov file after exported so that it displays corrrectly (inverse-anamorphicize) so that iDVD reads it correctly
    3) Can the mov be de-interlaced after the fact (so I could use QT export without conversion)?
    4) Something besides iDVD to put this together - that doesn't have this problem? (I like and want to use the iDVD menu/theme.)
    5) Other?????
    I also notice that all the QT-with-conversion mov files are 1/3 to 1/2 the size of the QT-only mov file, which is valuable and preferable to me. (I don't see any quality difference in the display...)

    In the Preview window > top frame > middle button
    do you have correct for pixel aspect ratio checked or not?
    !http://i533.photobucket.com/albums/ee340/gogiangigo/Picture1-4.png!

  • PAL files exported from FCP don't display

    This is a strange one... SD PAL uncompressed files exported from FCP 6.03 won't display, you just see black. HD files are fine, as are SD PAL files exported a while ago - prior to a recent pro apps or QT update possibly? As a workaround, if they exported via compressor instead of by 'export quicktime' in FCP, they work fine. Shake is 4.0 since 4.1 doesn't want to display via a decklink.
    Any ideas? This seems to be a new one.

    Does the computer your using to view this video have Final Cut Pro installed?

  • How can I import a backing track from itunes to garageband? thanks!

    how can I import a backing track from itunes to garageband? Just trying to record over it. thanks!

    Reveal  iTunes in GarageBand in the Media Browser like this:
    Use the search field to find your song in iTunes, and drag the song from the m
    Media Browser to a real instrument track or an empty space on the Time Line.
    Or drag the song from the iTunes Application window to the desktop, and from the Desktop into the Time Line in GarageBand. Unfortunately you cannot drag directly from iTunes to Garageband.
    Regards
    Léonie

  • HOW-TO Distinguish between file exported from Datapump and normal export

    How to distinguish between the dmp file export from the data pump utility and the export utility in Oracle 10g and 11g .
    Thanks,
    SS

    Like Werner suggested, it's never hurt to try anyway.
    use imp with SHOW=Y, if it works then Original otherwise Data pump.
    Once you determined one file, there's good chance that the rest are same. I don't think previous DBA will go through the trouble by mixing data pump and traditional exp/imp.

  • How do i send an html file exported from muse as email blast with images and live links?

    My question it:
    How do i send an html file exported from muse as email blast with images and live links?
    I have designed a "website" in adobe muse and exported it as an html file. I am not sure how to send my .html file in an email!
    Best,
    Nicole

    Unfortunately, the answer is, you don't. The requirements for HTML displayed in an e-mail reader are very different than those for HTML displayed in a browser. The output of Muse won't work as an HTML e-mail. You could upload the Muse site as a website and provide a link to it in an e-mail, but the HTML generated by Muse is not suitable for direct display by an e-mail program.

  • How to import .MOV files coming from everio camcorder ?

    How can I import  .MOV files coming from everio camcorder to imovie ? All I've tried failed, iMovie doesn't want my files, or even recognize.
    All answer welcome.
    Thanx

    JVC released the Quicktime Components update:
    <http://www2.cli.co.jp/products/ne/update_qtc_for_gzhd7/qtc3e_update.htm>
    which should take care of TOD files playing in Quicktime, but:
    The answer to your question depends on which model JVC camcorder you have.
    Here are a few basics:
    1. If you have a JVC HD Everio that records in the AVCHD high definition file format (.mts file extension), and you have an Mac with an Intel processor, (sound like you do) running iMovie '08 or '09, then it should  be no problem. Simply connect the camcorder via USB and launch iMovie.
    2. If you have a slightly older JVC HD Everio that records MPEG2 high definition (.tod file format), then it is easiest if you record in the special 1440CBR mode, and transfer your video to your Mac using an i.Link (Firewire Connection) using the "Playlist Dubbing" process which is explained in your owner's manual.
    See also this post from Chris at JVC dated March 4, 2010 at the end of this thread:
    http://discussions.apple.com/thread.jspa?threadID=2341218&tstart=0
    If you have further problems contact JVC.

  • Getting error message on ungrade install from itunes 10 to itunes 11

    getting error message on ungrade install from itunes 10 to itunes 11

    What does the error message say? (Precise text, please.)

Maybe you are looking for