Error importing support pack SAPKH60011 (SAP_APPL)

Dear All,
   I am faceing one error when applying support pack SAPKH60011 can not apply showing error " The import was stopped since an error occurred during tha phase IMPORT _PROPER ....". for details i here attached screenshot .
Pls. reply ,
Thanks and regards,
Mayur

Hi Mayur,
You need to check the latest alog, ulog and slog.
Check the main import log SAPI<package name> which should be in usr/sap/trans/log
This will cotnain details of why the import failed.
It it failed due to a deadlock occuring which can occur if someone is using the system while import is occuring, you should restart the database to clear any locks before attmpting the import again.
Another cause of failure during import can be the use of out of date transport tools. Please ensure you are using the latest tp and R3trans available for your release from the service marketplace.
Are you still able to access the system and repeat the import via SPAM?
If every transaction is resulting in a dump and Syntax errors, then please open a message with SAP and provide the alog, ulog and slog along with the main import log and screenshots of the results of
tp showbuffer <sid> pf=<path to transport profile> tag=SPAM
and screenshots of the contents of usr/sap/trans/tmp
for further analysis. Also, please do NOT make any manual commands or changes to the buffer or it can make the situation worse.
Ensure if the import has failed, that the related SAPKK<package name> is renamed / moved from usr/sap/trans/tmp if it is still there from the failed import attempt. If they are still there when you try a new import, the slog will filll with entries of
warning file ...... is already in use, waiting 30 seconds
and the import will not progress.
These files will be created once the new import is started.
When repeating the import, please monitor the SLOG entries and see that usr/sap/trans/log and usr/sap/trans/tmp are being updated regularly, this will allow you to see the progress of the import.
Please update with the contents of SAPI...... if the import still fails.
Best regards,
Paul

Similar Messages

  • Unwnated files after IMPORT SUPPORT PACKS ..

    Hi Gurus ,
                Kindly let me know how to remove the unwanted files and logs from the \usr\sap\trans folder after IMPORT SUPPORT PACKS .
    Regads
    selvan

    Hi,
    it is better to take a backup of log file before delete that form \usr\sap\trans\log
    file name with sap******.SID contain import log for respective support package,
    you can take backup(for future use in other system) and delete files from \usr\sap\trans\EPS\in folder,
    perform this operation on os level.
    regards,
    kaushal

  • ERROR WHILE IMPORTING SUPPORT PACKS

    Hi all
           After successfull installation of ECC - SERVER , while importing SAP_BASIS support pack , spam stuck with XPRA_EXECUTION phase.
    Kindly advice me resove this issue
    selvan

    Hi,
    Provide Import and Action Logs for the Exact error (SPAM >Goto> import/action logs.
    Regards
    Umesh

  • Import Support pack in Portal system with ESS & NWDI.

    Hi ,
    NW Portal system has the current support pack level of JAVA stack 11 which includes ESS business backages SAP_ESS 603 SP1, BP_ERP5***,BP_ERP5COM,BP_ERP5ESS, BP_ERP5HRA, BP_ERP5PSS 1.0 SP12. We are using NWDS for doing some customizing the ESS portal iViews configuration and transporting through NWDI tracks.
    If we are upgrading the support pack for netweaver and portal, whether the business packages and the java stack needs to be go through JSPM or through NWDI transport?
    At the same time we like to upgrade the SLD system which has only JAVA stack installed separately. What are the thing that we need to do in SLD before & after updating the support packages like CIM model, etc.
    As we are having the JAVA stack NETWEAVER 7.0,Eventhough SOLMAN mopz decides the level of SP level, but is it good to go to EHP1 or stay in the current Netweaver 7.0 Java stack and our current ECC are going to be in the Netweaver 7.0 Java.
    Thanks
    John

    John,
    If we are upgrading the support pack for netweaver and portal, whether the business packages and the java stack needs to be go through JSPM or through NWDI transport?
    JSPM only
    At the same time we like to upgrade the SLD system which has only JAVA stack installed separately. What are the thing that we need to do in SLD before & after updating the support packages like CIM model, etc.
    May be you want to trigger data push manually once from all system to make sure if everything is working fine , other than this nothing
    As we are having the JAVA stack NETWEAVER 7.0,Eventhough SOLMAN mopz decides the level of SP level, but is it good to go to EHP1 or stay in the current Netweaver 7.0 Java stack and our current ECC are going to be in the Netweaver 7.0 Java.
    Its good to go with latest , but to be in sync with ECC you can continue with 7.0.
    Regards,

  • Error importing Language pack ESECC62F.PAT

    hi all!
    I'm installing a server ECC 6 SR2, and now to complete the process I need to install the language pack I have in my file "ESECC62F.PAT" and am leaving in the path "\ usr \ sap \ trans \ EPS \ in ".
    and perform the previous steps in the TCode I18N, and now trying to import the package in the TCode SMLT tells me an error.
    I know it must generate a set of transportation orders, which are downloaded into the folder Cofile and Data.
    Someone can give me some indication of this, that I can do otherwise?
    thanks

    Hi got it done....finally the above two notes helped me out.
    tp import <req no.> <SID> client<nnn> pf='usr/sap/trans/bin/TP_DOMAIN_<SID>.PFL' "-Dr3transoptions=tcs=100000000"
    Hope this would be helpful to others also.
    Regards
    Rahul

  • Support Pack error in SPAM

    Hi
    I am importing a group of Support Packs into our DEV environment to bring the landscape uptodate, we are running NW04 on Windows 2003 64 bit & SQL Server 2000, I've updated to the latest SPAM and Kernel before the Support Packs.
    When importing in SPAM I have used the calculate queue method, all looks ok, when I perform the import, in the phase TEST IMPORT i get the following error for Support Pack SP 12 for EA-FINSERV 5.00 :
    <b>
    Function MAP2I_BAPICMS_STR_MOV_INS_CRT (CMS_BUSISB104_MAPPI does not fit into the existing function group ((CMS_BUSISB10)</b>
    The only option I am given is to repeat the phase, I've repeated this a few times and get the same error on TEST IMPORT. I'm new to NW04 640 BASIS, but I know from running 4.6X system that you can re-run phases and quite often they work correctly 2nd time round, is it worth changing SPAM to not stop on test import errors ? as I know objects required can be in earlier support packs (i'm applying supports pack EA-FINSERV 5.00 08 to 11 as part of the queue before 12 which is giving me the error.
    I've checked on OSS and cannot find any notes on this error/support pack.
    Thanks.

    nope, not tried with ignore test errors yet, wanted to check opinions here to see if thats the next step to try, or if there's anything else I could try ?

  • Error during application of scm 7.0 support pack

    While applying support pack to our SCM 7.0 system (New Installation),
    We encountered a SPAM error in xpra_execution phase, due to automatic
    termination of job RDDEXECL scheduled by user id DDIC on client 000.
    The details of the error are:
    Message id: Brain
    Message number : 366
    Message type: A
    Error: Error during SID assignment for characteristic 0REQUID (current
    value 2)
    We had a look at few notes mentioned by SAP support on 1319241. which
    specifies a solution as
    u201CIf you encounter the error message above, please run the Elementary
    test - Compare Number Range and Maximum SID - for Master Data 0REQUID
    in transaction RSRV. When it turns red, the error can be corrected by
    pressing the "Correct Error" button.u201D
    But we are already getting the light as green in the elementary test
    for the Master Data 0REQUID in transaction RSRV, though we still
    execute the same and problem is still the same i.e. RDDEXECL
    program/job is getting terminated.
    Regards
    Edited by: pranav kumar on Feb 25, 2011 8:20 AM

    Hi SM
    Just login to client which has been mentioned in table RSADMINA,then run rsrv you will get error.correct it.then you will be able to import support packs.
    Regards
    Pranav

  • Support Pack upgrade error in Import Phase

    Hello,
    Currently I am upgrading SCM system with Support pack level 12 to 20 . When i am applying Basis 12 to 20. I got an error in Import_Proper phase.
    Could you please help me on this? I tried and still searching solution for this..But no luck...
    Os is : AIX and
    Log File:                /usr/sap/trans/log/SAPIB70013.xxx
    Main import
    Transport request   : SAPKB70013
    System              : xxxx
    tp path             : tp
    Version and release: 372.04.71 700
    child process 934006 terminated -> setting rc=12 for this import portion
    sap_dext called with msgnr 1:
    db call info -
    function:   db_report_interface
    fcode:      CLOSE_LINE_MODE
    tabname:    SOURCE
    len (char): 40
    key:        CL_OBJECT_COLLECTION==========CT
    retcode:    1
    SQL error -913 accessing  : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
    child process 1212554 terminated -> setting rc=12 for this import portion
    sap_dext called with msgnr 1:
    db call info -
    function:   db_report_interface
    fcode:      CLOSE_LINE_MODE
    tabname:    SOURCE
    len (char): 40
    key:        CL_WDR_APPLICATION_WINDOW=====CT
    retcode:    1
    SQL error -913 accessing  : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
    child process 1171520 terminated -> setting rc=12 for this import portion
    sap_dext called with msgnr 1:
    db call info -
    function:   db_report_interface
    fcode:      CLOSE_LINE_MODE
    tabname:    SOURCE
    len (char): 40
    key:        CL_WDY_MD_EVENT_SOURCE========CI
    retcode:    1
    SQL error -913 accessing  : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
    child process 1331412 terminated -> setting rc=12 for this import portion
    sap_dext called with msgnr 1:
    db call info -
    function:   db_xrtab
    fcode:      RT_MI_LOAD
    tabname:    ECSCR_DATA
    len (char): 106
    key:        EC_TEST_DATA                  00000000P10                           IECATTDEFAULT
    retcode:    1
    SQL error -904 accessing  : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
    insert / update sequence failed due to an error in DBI.
    maybe there's a concurrent process which inserted this table entry at the same time.
    insert / update sequence failed due to an error in DBI.                       
    maybe there's a concurrent process which inserted this table entry at the same time.
    child process 1310922 terminated -> setting rc=12 for this import portion
    sap_dext called with msgnr 1:
    db call info -
    function:   db_xrtab
    fcode:      RT_MI_END
    tabname:    WDY_APP_PROPERTY
    len (char): 64
    key:        DEMO_UIEL_DROPDOWN_BY_IDX     DEMO_VIEW
    retcode:    1
    SQL error -904 accessing  : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
    import portion 018446 - 999999 not imported because the child processes died for unknown reason
    child process 1310924 terminated -> setting rc=12 for this import portion
    sap_dext called with msgnr 1:
    db call info -
    function:   db_report_interface
    fcode:      CLOSE_LINE_MODE
    tabname:    SOURCE
    len (char): 40
    key:        CL_WDY_MD_OUTGOING_EVENT======CT
    retcode:    1
    SQL error -913 accessing  : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
    child process 1286192 terminated -> setting rc=12 for this import portion
    sap_dext called with msgnr 1:
    db call info -
    function:   db_xrtab
    fcode:      RT_MI_LOAD
    tabname:    ECSCR_DATA
    len (char): 106
    key:        EC_TEST_DATA                  00000000P10                           IECATTDEFAULT
    retcode:    1
    SQL error -904 accessing  : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
    import portion 009158 - 018411 not imported because the child processes died for unknown reason
    import portion 018412 - 018527 not imported because the child processes died for unknown reason
    import portion 018528 - 999999 not imported because the child processes died for unknown reason
    sap_dext called with msgnr 1:
    db call info -
    function:   db_xrtab
    fcode:      RT_MI_LOAD
    tabname:    ECSCR_DATA
    len (char): 106
    key:        EC_TEST_DATA                  00000000P10                           IECATTDEFAULT
    retcode:    1
    SQL error -904 accessing  : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
    Main import
    End date and time : 20100909034914
    Ended with return code:  ===> 12 <===
         |   ######################################                     
    Thanks and Regards,
    Sankar
    SAP BASIS Consultant

    Hi,
    Thanks for you reply. I restarted import but no luck still. I activated some object also not working. when i call SPAM it is not going to the SPAM pager. Showing dump...
    Runtime Errors         CALL_FUNCTION_NOT_FOUND
    Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
    Date and Time          10.09.2010 09:41:37
    Short text
         Function module "POSS_UIREQ_OPT_SUBMIT" not found.
    What happened?
         The function module "POSS_UIREQ_OPT_SUBMIT" is called,
         but cannot be found in the library.
         Error in the ABAP Application Program
         The current ABAP program "SAPLSTXC" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    Error analysis
         An exception occurred that is explained in detail below.
         The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
          not caught in
         procedure "OPEN_FORM" "(FUNCTION)", nor was it propagated by a RAISING clause.
         Since the caller of the procedure could not have anticipated that the
         exception would occur, the current program is terminated.
         The reason for the exception is:
         The program "SAPLSTXC" contains the CALL FUNCTION statement.
         The name of the function module to be called is "POSS_UIREQ_OPT_SUBMIT".
         No function module exists with the name "POSS_UIREQ_OPT_SUBMIT".
         All function modules are listed in the Function Library (SE37).
    Possible reasons:
    a) Wrong name specified. Pay particular attenti
        upper/lower case and underscores ("_").
        or
    b) Transport error
    c) In the case of an enqueue/dequeue module,
        the lock object may not have been activated
        (ABAP/4 Dictionary).
    When i tried to check function module it is not there..
    Could you please help on this?
    Regards,
    Sankar Basis Consultant

  • XPRA_EXECUTION error importing ECC 6 support packs

    Hi gurus
    I am importing some Basis Support packs  SAPKB70010-SAPKB70018 for ECC6 .
    1.XPRA_EXECUTION
    2.I have check sm37 and  there is a program RDDEXECL which is failing
    Step 001 started (program RDDEXECL, variant , user ID Jamesm)  
    All DB buffers of application server mmdep01 were synchronized
    ABAP/4 processor: ITAB_DUPLICATE_KEY                         
    Job cancelled                                                
    3. I have checked in ST22  and got the runtime error:
    Runtime Errors         ITAB_DUPLICATE_KEY                                                            
    Date and Time          03.07.2009 00:29:29                                                                               
    Short text                                                                               
    A row with the same key already exists.                                                                               
    What happened?                                                                               
    Error in the ABAP Application Program                                                                               
    The current ABAP program "CL_FDT_TRANS_Q================CP" had to be                           
          terminated because it has                                                                      
         come across a statement that unfortunately cannot be executed.                                                                               
    What can you do?                                                                               
    Note down which actions and inputs caused the error.                                                                               
    To process the problem further, contact you SAP system                                          
         administrator.                                                                               
    Using Transaction ST22 for ABAP Dump Analysis, you can look                                     
         at and manage termination messages, and you can also                                            
         keep them for a long time.                                                                               
    Error analysis                                                                               
    An entry was to be entered into the table                                                       
          "\CLASS=CL_FDT_TRANS_Q\METHOD=DETERMIN_MERGE_FROM_Q\DATA=LTS_TRREQUEST_Q"                      
          (which should have                                                                               
    had a unique table key (UNIQUE KEY)).
    The insert-operation could have ocurred as a result of an INSERT- or   
    MOVE command, or in conjunction with a SELECT ... INTO.                                                                               
    The statement "INSERT INITIAL LINE ..." cannot be used to insert several
    initial lines into a table with a unique key.                         
    How to correct the error                                                      
        Probably the only way to eliminate the error is to correct the program.   
    If the error occures in a non-modified SAP program, you may be able to    
        find an interim solution in an SAP Note.                                  
        If you have access to SAP Notes, carry out a search with the following    
        keywords:                                                                               
    "ITAB_DUPLICATE_KEY" " "                                                  
        "CL_FDT_TRANS_Q================CP" or "CL_FDT_TRANS_Q================CM00A"
        "GET_INACTIVE_Q_ENTRIES"                                                                               
    I there a way of fixing this error .
    Any ideas are welcome

    Hi
    Check SAP Note 1124173 - FDT Transport: Dump during after import processing
    Thanks
    Sunny

  • Chinese Language - Support Pack for P3a V603 error

    Hello masters,
    I am trying to install Chinese.
    in SMLT when I do import language pack of support packages.
    I have many errors that must be imported. I tried to fix all of them, but I still have:
    423     Must be imported     SAPK-603BGINP3A     P3A V603: Add-On Upgrade
    422     Must be imported     SAPK-603DDINEAAPPL     EA-APPL 603 Upgrade: Meta-Commandfile (Delta Task)
    422     Must be imported     SAPK-603DFINEAAPPL     EA-APPL 603 Upgrade: Meta-Commandfile (Delta Task)
    421     Must be imported     SAPK-603DFINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
    422     Must be imported     SAPK-603DKINEAAPPL     EA-APPL 603 Upgrade: Meta-Commandfile (Delta Task)
    421     Must be imported     SAPK-603DKINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
    422     Must be imported     SAPK-603DMINEAAPPL     EA-APPL 603 Upgrade: Meta-Commandfile (Delta Task)
    421     Must be imported     SAPK-603DMINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
    422     Must be imported     SAPK-603DOINEAAPPL     EA-APPL 603 Upgrade: Meta-Commandfile (Delta Task)
    421     Must be imported     SAPK-603DOINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
    422     Must be imported     SAPK-603DRINEAAPPL     EA-APPL 603 Upgrade: Meta-Commandfile (Delta Task)
    421     Must be imported     SAPK-603DRINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
    422     Must be imported     SAPK-603DTINEAAPPL     EA-APPL 603 Upgrade: Meta-Commandfile (Delta Task)
    421     Must be imported     SAPK-603DTINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
    422     Must be imported     SAPK-603DUINEAAPPL     EA-APPL 603 Upgrade: Meta-Commandfile (Delta Task)
    421     Must be imported     SAPK-603DUINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
    422     Must be imported     SAPK-603DWINEAAPPL     EA-APPL 603 Upgrade: Meta-Commandfile (Delta Task)
    421     Must be imported     SAPK-603DWINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
    421     Must be imported     SAPK-603DXINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
    422     Must be imported     SAPK-603DZINEAAPPL     EA-APPL 603 Upgrade: Meta-Commandfile (Delta Task)
    421     Must be imported     SAPK-603DZINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
    Can you please advise how and where to find these ?
    Could not do it in Market Place
    Thanks in advance,
    Jordan

    Actually the windows is Ultimate version and I installed the English language package to convert it into English version Windows. The symptom was improved a little that I can add and delete characters in PDF but still can not "add or edit text box". In addition, every time I try to click the tool "add or edit text box", a message displays "There was a problem reading this document (14)." What does this mean?

  • Error in JSPM Support Pack update

    Hi,
    i am in the process of doing java support packs form level 9 to 14.
    I am doing 3 at a time
    After the sap-jee support pack got deployed the server0 for j2ee is not starting.
    Pls hlep
    The following is the log of disp_server0
    trc file: "F:\usr\sap\BWD\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
    node name   : ID13786450
    pid         : 7296
    system name : BWD
    system nr.  : 01
    started at  : Tue Jun 17 16:30:40 2008
    arguments       :
    *       arg[00] : F:\usr\sap\BWD\DVEBMGS01\exe\jlaunch.exe*
    *       arg[01] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[02] : -DSAPINFO=BWD_01_server*
    *       arg[03] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[04] : -DSAPSTART=1*
    *       arg[05] : -DCONNECT_PORT=3227*
    *       arg[06] : -DSAPSYSTEM=01*
    *       arg[07] : -DSAPSYSTEMNAME=BWD*
    *       arg[08] : -DSAPMYNAME=WDBSSAPBWD01_BWD_01*
    *       arg[09] : -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[10] : -DFRFC_FALLBACK=ON*
    *       arg[11] : -DFRFC_FALLBACK_HOST=localhost*
    [Thr 4660] Tue Jun 17 16:30:40 2008
    *[Thr 4660] *** WARNING => INFO: Unknown property [instance.box.number=BWDDVEBMGS01wdbssapbwd01] [jstartxx.c   841]*
    *[Thr 4660] *** WARNING => INFO: Unknown property [instance.en.host=WDBSSAPBWD01] [jstartxx.c   841]*
    *[Thr 4660] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]*
    *[Thr 4660] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]*
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties]
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> OS libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> os libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID13786400 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID13786450 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID13786400           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID13786450           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    [Thr 4660] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 4660] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 6916] JLaunchRequestFunc: Thread 6916 started as listener thread for np messages.
    [Thr 4836] WaitSyncSemThread: Thread 4836 started as semaphore monitor thread.
    [Thr 4660] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 4660] CPIC (version=700.2006.09.13)
    [Thr 4660] [Node: server0] java home is set by profile parameter
    *     Java Home: F:\java*
    [Thr 4660] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID13786450]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : F:\java
    -> java parameters    : -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
    -> java vm version    : 1.4.2_16-b05
    -> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 4660] JLaunchISetDebugMode: set debug mode [no]
    [Thr 6772] JLaunchIStartFunc: Thread 6772 started as Java VM thread.
    [Thr 6772] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
    *     Java Parameters: -Xss2m*
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -XX:MaxPermSize=256M
    -> arg[  5]: -XX:PermSize=256M
    -> arg[  6]: -XX:NewSize=171M
    -> arg[  7]: -XX:MaxNewSize=171M
    -> arg[  8]: -XX:+DisableExplicitGC
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Xloggc:GC.log
    -> arg[ 11]: -XX:+PrintGCDetails
    -> arg[ 12]: -XX:+PrintGCTimeStamps
    -> arg[ 13]: -Djava.awt.headless=true
    -> arg[ 14]: -Dsun.io.useCanonCaches=false
    -> arg[ 15]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 16]: -XX:SurvivorRatio=2
    -> arg[ 17]: -XX:TargetSurvivorRatio=90
    -> arg[ 18]: -Djava.security.policy=./java.policy
    -> arg[ 19]: -Djava.security.egd=file:/dev/urandom
    -> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 22]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 23]: -Dstartup.mode=SAFE
    -> arg[ 24]: -Dstartup.action=UPGRADE
    -> arg[ 25]: -Dsys.global.dir=F:\usr\sap\BWD\SYS\global
    -> arg[ 26]: -Dapplication.home=F:\usr\sap\BWD\DVEBMGS01\exe
    -> arg[ 27]: -Djava.class.path=F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=F:\java\jre\bin\server;F:\java\jre\bin;F:\java\bin;F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs;C:\Perl\site\bin;C:\Perl\bin;C:\Program Files\HP\NCU;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;F:\java\bin;F:\usr\sap\BWD\SYS\exe\uc\NTAMD64
    -> arg[ 29]: -Dmemory.manager=1024M
    -> arg[ 30]: -Xmx1024M
    -> arg[ 31]: -Xms1024M
    -> arg[ 32]: -DLoadBalanceRestricted=no
    -> arg[ 33]: -Djstartup.mode=JCONTROL
    -> arg[ 34]: -Djstartup.ownProcessId=7296
    -> arg[ 35]: -Djstartup.ownHardwareId=T1648851106
    -> arg[ 36]: -Djstartup.whoami=server
    -> arg[ 37]: -Djstartup.debuggable=no
    -> arg[ 38]: -Xss2m
    -> arg[ 39]: -DSAPINFO=BWD_01_server
    -> arg[ 40]: -DSAPSTART=1
    -> arg[ 41]: -DCONNECT_PORT=3227
    -> arg[ 42]: -DSAPSYSTEM=01
    -> arg[ 43]: -DSAPSYSTEMNAME=BWD
    -> arg[ 44]: -DSAPMYNAME=WDBSSAPBWD01_BWD_01
    -> arg[ 45]: -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01
    -> arg[ 46]: -DFRFC_FALLBACK=ON
    -> arg[ 47]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 48]: -DSAPSTARTUP=1
    -> arg[ 49]: -DSAPSYSTEM=01
    -> arg[ 50]: -DSAPSYSTEMNAME=BWD
    -> arg[ 51]: -DSAPMYNAME=WDBSSAPBWD01_BWD_01
    -> arg[ 52]: -DSAPDBHOST=WDBSSDBBWD01
    -> arg[ 53]: -Dj2ee.dbhost=WDBSSDBBWD01
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 6772] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 4752] Tue Jun 17 16:30:41 2008
    [Thr 4752] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 4752] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 4752] JLaunchISetClusterId: set cluster id 13786450
    [Thr 4752] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 4752] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 7688] Tue Jun 17 16:30:52 2008
    [Thr 7688] JLaunchIExitJava: exit hook is called (rc = -11113)
    *[Thr 7688] ***********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.*
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'*
    for additional information and trouble shooting.*
    [Thr 7688] JLaunchCloseProgram: good bye (exitcode = -11113)
    trc file: "F:\usr\sap\BWD\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
    node name   : ID13786450
    pid         : 4560
    system name : BWD
    system nr.  : 01
    started at  : Tue Jun 17 16:30:55 2008
    arguments       :
    *       arg[00] : F:\usr\sap\BWD\DVEBMGS01\exe\jlaunch.exe*
    *       arg[01] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[02] : -DSAPINFO=BWD_01_server*
    *       arg[03] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[04] : -DSAPSTART=1*
    *       arg[05] : -DCONNECT_PORT=3227*
    *       arg[06] : -DSAPSYSTEM=01*
    *       arg[07] : -DSAPSYSTEMNAME=BWD*
    *       arg[08] : -DSAPMYNAME=WDBSSAPBWD01_BWD_01*
    *       arg[09] : -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[10] : -DFRFC_FALLBACK=ON*
    *       arg[11] : -DFRFC_FALLBACK_HOST=localhost*
    [Thr 5300] Tue Jun 17 16:30:55 2008
    *[Thr 5300] *** WARNING => INFO: Unknown property [instance.box.number=BWDDVEBMGS01wdbssapbwd01] [jstartxx.c   841]*
    *[Thr 5300] *** WARNING => INFO: Unknown property [instance.en.host=WDBSSAPBWD01] [jstartxx.c   841]*
    *[Thr 5300] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]*
    *[Thr 5300] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]*
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties]
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> OS libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> os libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID13786400 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID13786450 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID13786400           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID13786450           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    [Thr 5300] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 5300] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 7140] JLaunchRequestFunc: Thread 7140 started as listener thread for np messages.
    [Thr 6892] WaitSyncSemThread: Thread 6892 started as semaphore monitor thread.
    [Thr 5300] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 5300] CPIC (version=700.2006.09.13)
    [Thr 5300] [Node: server0] java home is set by profile parameter
    *     Java Home: F:\java*
    [Thr 5300] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID13786450]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : F:\java
    -> java parameters    : -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
    -> java vm version    : 1.4.2_16-b05
    -> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 5300] JLaunchISetDebugMode: set debug mode [no]
    [Thr 6352] JLaunchIStartFunc: Thread 6352 started as Java VM thread.
    [Thr 6352] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
    *     Java Parameters: -Xss2m*
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -XX:MaxPermSize=256M
    -> arg[  5]: -XX:PermSize=256M
    -> arg[  6]: -XX:NewSize=171M
    -> arg[  7]: -XX:MaxNewSize=171M
    -> arg[  8]: -XX:+DisableExplicitGC
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Xloggc:GC.log
    -> arg[ 11]: -XX:+PrintGCDetails
    -> arg[ 12]: -XX:+PrintGCTimeStamps
    -> arg[ 13]: -Djava.awt.headless=true
    -> arg[ 14]: -Dsun.io.useCanonCaches=false
    -> arg[ 15]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 16]: -XX:SurvivorRatio=2
    -> arg[ 17]: -XX:TargetSurvivorRatio=90
    -> arg[ 18]: -Djava.security.policy=./java.policy
    -> arg[ 19]: -Djava.security.egd=file:/dev/urandom
    -> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 22]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 23]: -Dstartup.mode=SAFE
    -> arg[ 24]: -Dstartup.action=UPGRADE
    -> arg[ 25]: -Dsys.global.dir=F:\usr\sap\BWD\SYS\global
    -> arg[ 26]: -Dapplication.home=F:\usr\sap\BWD\DVEBMGS01\exe
    -> arg[ 27]: -Djava.class.path=F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=F:\java\jre\bin\server;F:\java\jre\bin;F:\java\bin;F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs;C:\Perl\site\bin;C:\Perl\bin;C:\Program Files\HP\NCU;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;F:\java\bin;F:\usr\sap\BWD\SYS\exe\uc\NTAMD64
    -> arg[ 29]: -Dmemory.manager=1024M
    -> arg[ 30]: -Xmx1024M
    -> arg[ 31]: -Xms1024M
    -> arg[ 32]: -DLoadBalanceRestricted=no
    -> arg[ 33]: -Djstartup.mode=JCONTROL
    -> arg[ 34]: -Djstartup.ownProcessId=4560
    -> arg[ 35]: -Djstartup.ownHardwareId=T1648851106
    -> arg[ 36]: -Djstartup.whoami=server
    -> arg[ 37]: -Djstartup.debuggable=no
    -> arg[ 38]: -Xss2m
    -> arg[ 39]: -DSAPINFO=BWD_01_server
    -> arg[ 40]: -DSAPSTART=1
    -> arg[ 41]: -DCONNECT_PORT=3227
    -> arg[ 42]: -DSAPSYSTEM=01
    -> arg[ 43]: -DSAPSYSTEMNAME=BWD
    -> arg[ 44]: -DSAPMYNAME=WDBSSAPBWD01_BWD_01
    -> arg[ 45]: -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01
    -> arg[ 46]: -DFRFC_FALLBACK=ON
    -> arg[ 47]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 48]: -DSAPSTARTUP=1
    -> arg[ 49]: -DSAPSYSTEM=01
    -> arg[ 50]: -DSAPSYSTEMNAME=BWD
    -> arg[ 51]: -DSAPMYNAME=WDBSSAPBWD01_BWD_01
    -> arg[ 52]: -DSAPDBHOST=WDBSSDBBWD01
    -> arg[ 53]: -Dj2ee.dbhost=WDBSSDBBWD01
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 6352] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 5836] Tue Jun 17 16:30:56 2008
    [Thr 5836] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 5836] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 5836] JLaunchISetClusterId: set cluster id 13786450
    [Thr 5836] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 5836] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 6128] Tue Jun 17 16:31:06 2008
    [Thr 6128] JLaunchIExitJava: exit hook is called (rc = -11113)
    *[Thr 6128] ***********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.*
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'*
    for additional information and trouble shooting.*
    [Thr 6128] JLaunchCloseProgram: good bye (exitcode = -11113)
    trc file: "F:\usr\sap\BWD\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
    node name   : ID13786450
    pid         : 8152
    system name : BWD
    system nr.  : 01
    started at  : Tue Jun 17 16:31:10 2008
    arguments       :
    *       arg[00] : F:\usr\sap\BWD\DVEBMGS01\exe\jlaunch.exe*
    *       arg[01] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[02] : -DSAPINFO=BWD_01_server*
    *       arg[03] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[04] : -DSAPSTART=1*
    *       arg[05] : -DCONNECT_PORT=3227*
    *       arg[06] : -DSAPSYSTEM=01*
    *       arg[07] : -DSAPSYSTEMNAME=BWD*
    *       arg[08] : -DSAPMYNAME=WDBSSAPBWD01_BWD_01*
    *       arg[09] : -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[10] : -DFRFC_FALLBACK=ON*
    *       arg[11] : -DFRFC_FALLBACK_HOST=localhost*
    [Thr 6468] Tue Jun 17 16:31:10 2008
    *[Thr 6468] *** WARNING => INFO: Unknown property [instance.box.number=BWDDVEBMGS01wdbssapbwd01] [jstartxx.c   841]*
    *[Thr 6468] *** WARNING => INFO: Unknown property [instance.en.host=WDBSSAPBWD01] [jstartxx.c   841]*
    *[Thr 6468] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]*
    *[Thr 6468] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]*
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties]
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> OS libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> os libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID13786400 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID13786450 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID13786400           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID13786450           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    [Thr 6468] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 6468] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 7576] JLaunchRequestFunc: Thread 7576 started as listener thread for np messages.
    [Thr 7312] WaitSyncSemThread: Thread 7312 started as semaphore monitor thread.
    [Thr 6468] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 6468] CPIC (version=700.2006.09.13)
    [Thr 6468] [Node: server0] java home is set by profile parameter
    *     Java Home: F:\java*
    [Thr 6468] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID13786450]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : F:\java
    -> java parameters    : -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
    -> java vm version    : 1.4.2_16-b05
    -> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 6468] JLaunchISetDebugMode: set debug mode [no]
    [Thr 7456] JLaunchIStartFunc: Thread 7456 started as Java VM thread.
    [Thr 7456] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
    *     Java Parameters: -Xss2m*
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -XX:MaxPermSize=256M
    -> arg[  5]: -XX:PermSize=256M
    -> arg[  6]: -XX:NewSize=171M
    -> arg[  7]: -XX:MaxNewSize=171M
    -> arg[  8]: -XX:+DisableExplicitGC
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Xloggc:GC.log
    -> arg[ 11]: -XX:+PrintGCDetails
    -> arg[ 12]: -XX:+PrintGCTimeStamps
    -> arg[ 13]: -Djava.awt.headless=true
    -> arg[ 14]: -Dsun.io.useCanonCaches=false
    -> arg[ 15]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 16]: -XX:SurvivorRatio=2
    -> arg[ 17]: -XX:TargetSurvivorRatio=90
    -> arg[ 18]: -Djava.security.policy=./java.policy
    -> arg[ 19]: -Djava.security.egd=file:/dev/urandom
    -> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 22]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 23]: -Dstartup.mode=SAFE
    -> arg[ 24]: -Dstartup.action=UPGRADE
    -> arg[ 25]: -Dsys.global.dir=F:\usr\sap\BWD\SYS\global
    -> arg[ 26]: -Dapplication.home=F:\usr\sap\BWD\DVEBMGS01\exe
    -> arg[ 27]: -Djava.class.path=F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=F:\java\jre\bin\server;F:\java\jre\bin;F:\java\bin;F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs;C:\Perl\site\bin;C:\Perl\bin;C:\Program Files\HP\NCU;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;F:\java\bin;F:\usr\sap\BWD\SYS\exe\uc\NTAMD64
    -> arg[ 29]: -Dmemory.manager=1024M
    -> arg[ 30]: -Xmx1024M
    -> arg[ 31]: -Xms1024M
    -> arg[ 32]: -DLoadBalanceRestricted=no
    -> arg[ 33]: -Djstartup.mode=JCONTROL
    -> arg[ 34]: -Djstartup.ownProcessId=8152
    -> arg[ 35]: -Djstartup.ownHardwareId=T1648851106
    -> arg[ 36]: -Djstartup.whoami=server
    -> arg[ 37]: -Djstartup.debuggable=no
    -> arg[ 38]: -Xss2m
    -> arg[ 39]: -DSAPINFO=BWD_01_server
    -> arg[ 40]: -DSAPSTART=1
    -> arg[ 41]: -DCONNECT_PORT=3227
    -> arg[ 42]: -DSAPSYSTEM=01
    -> arg[ 43]: -DSAPSYSTEMNAME=BWD
    -> arg[ 44]: -DSAPMYNAME=WDBSSAPBWD01_BWD_01
    -> arg[ 45]: -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01
    -> arg[ 46]: -DFRFC_FALLBACK=ON
    -> arg[ 47]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 48]: -DSAPSTARTUP=1
    -> arg[ 49]: -DSAPSYSTEM=01
    -> arg[ 50]: -DSAPSYSTEMNAME=BWD
    -> arg[ 51]: -DSAPMYNAME=WDBSSAPBWD01_BWD_01
    -> arg[ 52]: -DSAPDBHOST=WDBSSDBBWD01
    -> arg[ 53]: -Dj2ee.dbhost=WDBSSDBBWD01
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 7456] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 7648] Tue Jun 17 16:31:11 2008
    [Thr 7648] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 7648] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 7648] JLaunchISetClusterId: set cluster id 13786450
    [Thr 7648] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 7648] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 7432] Tue Jun 17 16:31:21 2008
    [Thr 7432] JLaunchIExitJava: exit hook is called (rc = -11113)
    *[Thr 7432] ***********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.*
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'*
    for additional information and trouble shooting.*
    [Thr 7432] JLaunchCloseProgram: good bye (exitcode = -11113)
    trc file: "F:\usr\sap\BWD\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
    node name   : ID13786450
    pid         : 7280
    system name : BWD
    system nr.  : 01
    started at  : Tue Jun 17 16:31:25 2008
    arguments       :
    *       arg[00] : F:\usr\sap\BWD\DVEBMGS01\exe\jlaunch.exe*
    *       arg[01] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[02] : -DSAPINFO=BWD_01_server*
    *       arg[03] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[04] : -DSAPSTART=1*
    *       arg[05] : -DCONNECT_PORT=3227*
    *       arg[06] : -DSAPSYSTEM=01*
    *       arg[07] : -DSAPSYSTEMNAME=BWD*
    *       arg[08] : -DSAPMYNAME=WDBSSAPBWD01_BWD_01*
    *       arg[09] : -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[10] : -DFRFC_FALLBACK=ON*
    *       arg[11] : -DFRFC_FALLBACK_HOST=localhost*
    [Thr 5400] Tue Jun 17 16:31:25 2008
    *[Thr 5400] *** WARNING => INFO: Unknown property [instance.box.number=BWDDVEBMGS01wdbssapbwd01] [jstartxx.c   841]*
    *[Thr 5400] *** WARNING => INFO: Unknown property [instance.en.host=WDBSSAPBWD01] [jstartxx.c   841]*
    *[Thr 5400] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]*
    *[Thr 5400] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]*
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties]
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> OS libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> os libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID13786400 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID13786450 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID13786400           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID13786450           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    [Thr 5400] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 5400] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 4264] WaitSyncSemThread: Thread 4264 started as semaphore monitor thread.
    [Thr 4488] JLaunchRequestFunc: Thread 4488 started as listener thread for np messages.
    [Thr 5400] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 5400] CPIC (version=700.2006.09.13)
    [Thr 5400] [Node: server0] java home is set by profile parameter
    *     Java Home: F:\java*
    [Thr 5400] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID13786450]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : F:\java
    -> java parameters    : -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
    -> java vm version    : 1.4.2_16-b05
    -> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 5400] JLaunchISetDebugMode: set debug mode [no]
    [Thr 4872] JLaunchIStartFunc: Thread 4872 started as Java VM thread.
    [Thr 4872] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
    *     Java Parameters: -Xss2m*
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -XX:MaxPermSize=256M
    -> arg[  5]: -XX:PermSize=256M
    -> arg[  6]: -XX:NewSize=171M
    -> arg[  7]: -XX:MaxNewSize=171M
    -> arg[  8]: -XX:+DisableExplicitGC
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Xloggc:GC.log
    -> arg[ 11]: -XX:+PrintGCDetails
    -> arg[ 12]: -XX:+PrintGCTimeStamps
    -> arg[ 13]: -Djava.awt.headless=true
    -> arg[ 14]: -Dsun.io.useCanonCaches=false
    -> arg[ 15]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 16]: -XX:SurvivorRatio=2
    -> arg[ 17]: -XX:TargetSurvivorRatio=90
    -> arg[ 18]: -Djava.security.policy=./java.policy
    -> arg[ 19]: -Djava.security.egd=file:/dev/urandom
    -> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 22]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 23]: -Dstartup.mode=SAFE
    -> arg[ 24]: -Dstartup.action=UPGRADE
    -> arg[ 25]: -Dsys.global.dir=F:\usr\sap\BWD\SYS\global
    -> arg[ 26]: -Dapplication.home=F:\usr\sap\BWD\DVEBMGS01\exe
    -> arg[ 27]: -Djava.class.path=F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=F:\java\jre\bin\server;F:\java\jre\bin;F:\java\bin;F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs;C:\Perl\site\bin;C:\Perl\bin;C:\Program Files\HP\NCU;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;F:\java\bin;F:\usr\sap\BWD\SYS\exe\uc\NTAMD64
    -> arg[ 29]: -Dmemory.manager=1024M
    -> arg[ 30]: -Xmx1024M
    -> arg[ 31]: -Xms1024M
    -> arg[ 32]: -DLoadBalanceRestricted=no
    -> arg[ 33]: -Djstartup.mode=JCONTROL
    -> arg[ 34]: -Djstartup.ownProcessId=7280

    We installed teh objects through SDM .
    this solved the issue

  • Short dump in every transaction during support pack import - Solution Mgr

    I am in the middle of applying support packs SP13 and SP14 for Solution Manager.  In SPAM, during the import, I received short dumps.  I get short dump for all transactions.  The error message is 'Syntax error in program "SAPLWB_CUSTOMIZING", Field "G_DC_TABSTR" is unknown in INCLUDE LWB_CUSTOMIZINGDEV'.
    Please help.  Thanks !

    Hi
    My first question, would be, why are you performing  other activities while importing patches?
    This is not recommended.
    Rahul

  • Support pack not importing

    Dear Team,
    When I am running Support pack SAPKB70010.
    The import was stopped, since an error occurred during the phase
    IMPORT_PROPER, which the Support Package Manager is unable to resolve
    without your input.
    After you have corrected the cause of the error, continue with the
    import by choosing Support Package -> Import queue from the initial
    screen of the Support Package Manager.
    The following details help you to analyze the problem:
    Error in phase: IMPORT_PROPER
    Reason for error: TP_CANNOT_CONNECT_SYSTEM
    Return code: 0212
    Error message: could not access file as supposed (see dev_tp or
    SLOG1025.R3P for more de
    I have check my STMS is proper configure.
    When I check System Log in  /usr/sap/trans/log/
    START imp all              R3P        20100621070516              DDIC         testserver 20100621070516     
    INFO: event SAP_IMPORT_START triggered successfully
    START tp_getprots          R3P S      20100621070517              DDIC         testserver 20100621070516     
    STOP  imp all              R3P   7006 20100621213330              DDIC         testserver 20100621070516     
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    START imp all              R3P        20100621224459              DDIC         testserver 20100621224458     
    INFO: event SAP_IMPORT_START triggered successfully
    START tp_getprots          R3P S      20100621224500              DDIC         testserver 20100621224458     
    How I do  this one
    Regards

    how about reading your error message completely?
    Error message: could not access file as supposed (see dev_tp or SLOG1025.R3P for more

  • DDIC_ACTIVATION Error during application of Support Pack SAPKH47007

    Hi All,
    We were trying to apply Support Pack SAPKH47007 and it gave us an error in DDIC_Activation Phase and when i checked the logs it gave us this error
    Relationship TMFK-TDID for table TTXS does not exist
    Check dependent search help S_TMFK_SETTLE
    Search help S_TMFK_SETTLE is consistent
    I searched and found one Relevant Note for this SAP Note Num : 625098 and it tells us to delete the following fields
    Delete the fields FLG_AK_PAYM_FICA and FLG_AK_PAYM_FIAR from the table
    I went to SE11 and i dont see this fields there, and even though if i see them i dont think i can delete them coz it is asking Developer Key.
    Upon further checking i found that if we delete the Contents in  Pat01 and Pat03 we can go ahead and redo the support packs from begining. Can anyone throw some light on this as to how safe is this?
    Regards,
    Ershad Ahmed.

    Did you read the note I gave you?
    The note says:
    Symptom: An error occurs in the DDIC_ACTIVATION phase when you import Support Package SAPKH47007. The DDIC activation log records the following error messages:
      Relationship TMFK-TDID for table TTXS does not exist
    <...>
    Solution: A general solution to the problem is available with R/3 Support Package SAPKH47010. To avoid the error, import the Support Packages SAPKH47007 and SAPKH47010 together in a queue.
    If you have already encountered this error, the queue must be reset and extended to include Support Package SAPKH47010. Since you cannot reset the queue from the DDIC_ACTIVATION phase using normal means, this must be done by SAP Support (Component BC-UPG-OCS).
    Markus

  • Error in Supprt pack import

    i am in the process of Support pack import for solution Manager.
    I am getting the following error for any support pack. Pls hlep
    Activate objects at level 2*
      Field FILECONTENT: Component type or domain used not active or does not exist
      Field FILENAME: Component type or domain used not active or does not exist
      Field NUMBER_OF_LINES: Component type or domain used not active or does not exist
      Field OBJECT_ATTACHABLE: Component type or domain used not active or does not exist
      Field OBJECT_RELEASEABLE: Component type or domain used not active or does not exist
      Field VISIBLE_FLAG: Component type or domain used not active or does not exist

    My current support package level is 12
    i am implementing SAPKB70013
    PFB the error log
    4 EDH102XActivate search help "WDY_VALUE_HELP_ID_FREESTYLE"
    4EEDH118 Table "WDY_V_USED_INTF" is not a database table => not suitable as selection method
    4 EDH109 Search help "WDY_VALUE_HELP_ID_FREESTYLE" was not activated
    4 EDT012XActivate table "SI_WD_FIRST_MAIN_SCREEN"
    4EEDT242 Field "FILECONTENT": Component type or domain used not active or does not exist
    4EEDT242 Field "FILENAME": Component type or domain used not active or does not exist
    4EEDT242 Field "NUMBER_OF_LINES": Component type or domain used not active or does not exist
    4EEDT242 Field "OBJECT_ATTACHABLE": Component type or domain used not active or does not exist
    4EEDT242 Field "OBJECT_RELEASEABLE": Component type or domain used not active or does not exist
    4EEDT242 Field "VISIBLE_FLAG": Component type or domain used not active or does not exist
    4EEDT005 Nametab for table "SI_WD_FIRST_MAIN_SCREEN" cannot be generated
    4 EDT013 Table "SI_WD_FIRST_MAIN_SCREEN" was not activated
    4 EDO680XSynchronous processing: "0" sec., "2" objects, "1.590" costs
    1 ED0301X*************************************************************************
    1 ED0306       "Object Activation"
    1 ED0322 End phase  "001" ***********************************************************
    1 ED0320XStart phase "002" **********************************************************
    1 ED0306       "Final log"
    1 ED0301 *************************************************************************
    1 EDO578XFollowing objects not activated/deleted or activated/deleted w. warning:
    1EEDO519X"Srch Help" "WDY_VALUE_HELP_ID_FREESTYLE" could not be activated
    1 ED0314 (E- Table WDY_V_USED_INTF is not a database table => not suitable as selection method )
    1EEDO519 "Table" "SI_WD_FIRST_MAIN_SCREEN" could not be activated
    1 ED0313 (E- Nametab for table SI_WD_FIRST_MAIN_SCREEN cannot be generated )

Maybe you are looking for