Error in 2004s Transformation

I am trying to assign a DATS field(WADAT) directly to 0CALDAY in the Netweaver 2004s transformation, while activating I am getting a warning "The properties of the InfoObject selected, 0CALDAY, do not match the properties of the available source field." and then the activation fails. Any sugestions ?
The source and destinations are DATS field, LNG , size 8.

Try specifying 0CALDAY as infobject for the source field WADAT (in the right side on input field row in the rule popup screen).

Similar Messages

Error while activating transformation ---- Message no. RSTRAN510

Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on ECC 6.0 , BI 7.0.
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
here I have some doubt
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
Is it Right way For create InfoCube ?
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
Cannot generate proposal
Message no. RSTRAN017
Then I try to activate, I got the Error.
Error while activating transformation
Message no. RSTRAN510
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like Basis Guy need to install any Patch or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasanna

Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step creating DTP
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
Object Type : Info cube
Name : YSTU (This is my Cube Name)
Source of DTP
Object Type : Data source (It automatically Taken)
Data source : This is Disabled
Source system: This is Disabled
continue (Enter)
I got the message ?
Specify Name of source
and courser is in Data Transfer Proc 
Thanks
prasanna

Error while activating Transformations

Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.

Hi,
Map it with required Unit filed from your Source .
Mayank

Error while activating Transformation RSO404

Hi All,
When i am activating a transformation i am getting this error. The transformation was not getting active. Can u please let me know why it was happening. There are no syntax errors in the routine or in the start routine.
regards,
mahesh.

Hi Jin,
I also checked that one but it was not showing any errors. Why i got this problem is we have a start routine in this one when i am loading data into that it was getting an error that there was a problem in start routine.
So, what i have done i commented the start routine and again activated the transformation it thrown an error. again i uncommented the start routine and start doing activation it was throwing the same error. Can u please reply if u can understand my question or not.
regards,
mahesh.

Error while activating transformation

Hi Experts,
I need to activate a transformation between a cube and DSO.
But I am getting an error message while activating the Transformation the messages are as followed.
1. Error when writing routines
   Message Number. RSAA561
2. Error while activating transformation
    Message Number. RSTRAN510
3. Error activating transformation.
   Message number. RSO404
I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
Regards
Shubh Karan

Might be a problem with the time conversion routines. delete the transformationa nd try again.
Good luck,
vijay

Error while activating Transformation CO_OM_WBS_3

Hi everybody,
i get the following error message while activating the transformation for CO_OM_WBS_3 in Dev
Error while activating transformation
Message no. RSTRAN510
Error when writing routines
i checked the routine for co_om_wbs_3 the syntex was correct.
i have checked in forum am not getting clear picture please guide me and
sap component version : SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW 7010006 SAPKW70106
BI_CONT 704 0006 SAPK-70406INBICONT
Regards,
Sunder

Dear anand,
thankyou
Regards,
sunder
Edited by: sundersham on Mar 28, 2010 12:34 PM

Error While Transporting Transformation

Hi Gurus, I have this issue that I am getting an error while transporting Transformation. I made sure that that only transformation is sected and nothing else. I am getting this error message while importing it in BWQ environment "Formula 4AY060939P5D2NKRXKMJFECLS is already locked in the requests of other users or the system is set so that formula 4AY060939P5D2NKRXKMJFECLS can no longer be changed."
I was wondering, if this is locked by some other object or transport request, how can I find that out? Thanks in advance for all the help.

Hi,
You can check if the request is locked by another transport in BWQ by using the transaction SE03.
First find the object directory entry for your object(you can take this from your transport. Go to SE03 --> 'Search for Objects in Requests/Tasks '. Under object selection enter the details as in your transport and select the check box against your new entry. Under Request/Task selection, select 'Modified' and 'Released'. Execute. You will now see a list of transport requests that contain your transformation. Check these & either release them or delete your object from the modifable transports. Re import your transport.
You can check if this object was locked by a person using the transaction SM12.
Regards,
Shilpa

Error while activating transformation in BI 7.0

HI,
Error: Error while activating transformation.
Does anyone know how to solve this.
Sheela

Hi,
There may be many issues like:
If you have any routines, check the syntax.
Check all the fields are mapped properly or not.
Check any currency or unit conversion in transformation.
Data type mismatch -> make sure source and target infoobject either numerical or interconvertible.
Length mismatch between source and target infoobject.
Rgs,
I.R.K

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

Error while activating transformations? can you please help me

Hi
I am trying to create info cube , i created info objects, info cube,datasource. when i am trying to creat transformation it is throwing and error :
Error while activating transformation
Message no. RSTRAN510
Can any one help me?
Srinath

Hi
I think you are trying to activate the transformation.
Have you tried to generate proposal?
I think you will get the following error message :
Cannot generate proposal
Message no. RSTRAN017
the system would never generate a proposal . u need to map the fields manually in the transformations... after u map it ... check the mapping and activate it ...
Due to this when you are going to activate the transformation it is throwing this error message.
If this works kindly assign me some points.
Regards,
Debjani..

Error when generate Transformation- GP_ERR_RSTRAN_MASTER_TMPL related

Dear all:
We created transformation for cube 0PA_C01 and infoSource 0HR_PA_1 based on 3.x transfer rule. When we performed "Check", it is done successfully with any error. But during activation, there s syntax error occurred in program "GP_ERR_RSTRAN_MASTER_TMPL". And error lines are as following--
line 2815:
"Field "_B_1-MVIEW-CO_AREA" is unknown. It is neither in one of the spe"
"cified tables nor defined by a "DATA" statement. "DATA" statement. "DA"
"TA" statement."
Also there are two error message generated :
RSTRAN511- Error During generation
RSO404 - Error when activating Transformation 0ERUYQ8XMDJS1DP5U5U7HTBBNBME3GOE
Any thought please ~~~
BR
SF

Hi
Iam creating transformations for 0IC_C03. Iam facing problem in activating the transformations successfully. Some times it is throughing the above said error and some other times it is throughing the error ASSIGN_TYPE_CONFLICT. I searched forums almost a day and i found that SP 9 is unstable in which we are now and experts suggesting to upgrade to SP10 or SP12. But the problem is client is not willing to go to SP upgradation now. I have no clue now. I almost spend two days on this. But on the other hand iam able to generate transformations successfully and able to load data for other cube 0SD_D04.
kindly suggest any one to get rid of this issue. Iam running out of time.
Thanks
Kumar

Error while actvating Transformation

Gurus,
I've changed a DSO, i.e., added new InfoObjects . All the fields are mapped properly.
When I'm actvating transformation - its giving me error messages
- Error while activating transformation - RSTRAN510
- Error when writing routines - RSAA561
- Error when activating Transformation 0KC0IK6EYKKG22LW9MN80OV6H9RUZWNR - RSO404
I tried the following:
1. Tried actvating the Transformation after deleting data from DSO.
2. Tried logging off /nrsal and performed Actvation.
To Update:
1. There is no start routine and end routine written for this DSO.
Can anybody help me in fixing this problem.
Regards,
Yaseen

Hi,
InfoObjects: Deleting temporal hierarchy join in target syst, or due to deleting routines or even you can get this msg when you had not assigened the Units.
Go though the below SAP Notes and link for your reference...
[/message/1410802#1410802 [original link is broken];
apply the SAP Notes
SAP Note Number: 1100975
SAP Note Number: 979487
if you had resoved the issue...do let me know the approach...
regards,
NR

Start routine errors while activating transformations 2LIS_13_VDITM

Hi Friends,
I have an error while activating transformation for Cube: 0SD_C03
Transformation Z2LIS_13_VDITM
The start routine error is like this->
Start Routine: Syntax error in routine
Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
S:RSTRAN:552 38 0CRM_PROD 01 Standard Group 0MATERIAL
Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
Key rule 43 (target field: 0VERSION): Initial update set
pls guys if some one can suggest me to solve this i would be very greateful
Bala
Edited by: bala dondeti on Jun 20, 2011 12:32 PM
Edited by: bala dondeti on Jun 20, 2011 12:43 PM

Thanks for the info Umesh,
Just to be sure - I should simply change "SOURCE_PACKAGE" to "DATA_PACKAGE" in the code of the start routine? "Source_Package" is present in two places in that code:
METHODS
      start_routine
        IMPORTING
          request                  type rsrequest
          datapackid               type rsdatapid
        EXPORTING
          monitor                  type rstr_ty_t_monitors
        CHANGING
          SOURCE_PACKAGE              type tyt_SC_1
        RAISING
          cx_rsrout_abort.
and then after that in:
Migrated update rule call
Perform routine_9998
TABLES
    SOURCE_PACKAGE
CHANGING
    l_abort.
Or should I revert to the 3.5 version? (as a side note, that Data Source (2LIS_13_VDITM) has been activated in 7.0 version by default, when I replicated data sources in BW).
Praveen, as to your remarks, I have the datasource 2LIS_13_VDITM (in version 7.0) active, along with the appropriate Infosource. Transformation between the DataSource and InfoSource is active, and only the transformation between the InforSource and the Cube poses problems.
BR,
Alek

Errors While Transporting Transformations and DTPs

Hi Experts,
Iu2019m trying to transport transformations and DTPs from DEV to QA and am getting the following error messages. Does anyone know whatu2019s happening and how I can fix this?
Thanks,
Janice
The following are excepts from the log of the transport organizer with further SAP supplied information on the error messages.
Transformations:
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
Activation of Objects with Type Transformation
Checking Objects with Type Transformation
Checking Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4
No rule exists
Target RSDS 0ACCOUNT_TEXT QA1CLNT400 is not allowed
Target RSDS 0ACCOUNT_TEXT QA1CLNT400 is not allowed
Message no. RSTRAN802
No rule exists
Message no. RSTRAN514
DTPs:
Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
Conversion of T version from DTP DTP_4FG5GXT9OLNN3YM3QFMW9V3W5 to M version...
Conversion of T version from DTP DTP_4FK894515QD0O9UM4JSJPIB91 to M version...
Activation of Objects with Type Data Transfer Process
Saving Objects with Type Data Transfer Process
Saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (cannot be executed)
Error saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (cannot be executed)
Message no. RSTRAN715
Diagnosis
The transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (not executable).
This can be caused, for example, by a change made to the source object or target object of the transformation.
The transformation connects the source to the target .
Procedure
The transformation must be reactivated.
Error saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
Message no. RSO843

Thanks so much everyone for your suggestions. Iu2019ve tried them all and hereu2019s what I now have:
Anil u2013 Active datasources were included in the original transport. I tried retransporting and got the same error messages.
Voodi u2013 0ACCOUNT_TEXT was resident in the Q system as a 3x datasource. I replicated it as a 70 datasource in D and this is what was transported to Q. It is a 7.0 datasource in Q. I got the same error messages when I tried transporting just the transformations.
Jayaram - 0ACCOUNT is active in the Q system and is currently being used in transformations other than the one Iu2019m trying to import.
Godhuli u2013 I not only re-replicated the datasource in D, I reactivated the transformations and DTPs and resaved the InfoPackages. I tried retransporting with a new transport request and it failed with the same error messages.
Is there anything else anyone can think of?
Thanks,
Janice

Error using XSLt Transformation

Hi,
I am using a servlet to get some results from the web which will be a XML file pass it to a XSLT Processor to covert it into a html doc .The code is compiling but when I run the servlet,i am getting following error.
Can anybody tell me how to solve it .its very urgent
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Servlet execution threw an exception
root cause
java.lang.NoSuchMethodError: org.apache.xerces.framework.XMLParser.setSendCharDataAsCharArray(Z)V
 org.apache.xalan.xpath.dtm.DTM.<init>(DTM.java:222)
 org.apache.xalan.xpath.dtm.DTMLiaison.parse(DTMLiaison.java:197)
 org.apache.xalan.xslt.XSLTEngineImpl.getSourceTreeFromInput(XSLTEngineImpl.java:838)
 org.apache.xalan.xslt.XSLTEngineImpl.process(XSLTEngineImpl.java:552)
 SearchServlet.doGet(SearchServlet.java:90)
 javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
 javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.7 logs.
Following is the code I am using
// importing
import java.net.*;
import java.io.*;
import java.net.URLEncoder;
import java.util.Enumeration;
import java.util.*;
import java.net.MalformedURLException;
import javax.servlet.*;
import javax.servlet.http.*;
import javax.servlet.http.HttpServletRequest.*;
import javax.servlet.http.HttpServletResponse.*;
import java.io.OutputStream;
import org.xml.sax.InputSource;
import org.apache.xalan.xslt.XSLTProcessorFactory;
import org.apache.xalan.xslt.XSLTInputSource;
import org.apache.xalan.xslt.XSLTResultTarget;
import org.apache.xalan.xslt.XSLTProcessor;
import org.apache.xml.serialize.BaseMarkupSerializer.*;
import org.apache.xerces.xni.QName;
import org.apache.xerces.xni.XMLAttributes;
import org.apache.xerces.xni.XMLDocumentHandler;
import org.apache.xerces.xni.XMLLocator;
import org.apache.xerces.xni.XMLString;
import org.apache.xerces.xni.XNIException;
import org.apache.xerces.xni.XMLResourceIdentifier;
import org.apache.xerces.xni.Augmentations;
public class SearchServlet extends HttpServlet
//Class SearchServlet
//doGet Method
public void doGet(HttpServletRequest request,HttpServletResponse response) throws
IOException,ServletException,MalformedURLException
//try
 try
String resultHere=new PageRequestor().sendGETMessageThroughSocket();
File testFile = new File("C:\\Program Files\\Apache Software Foundation\\Tomcat 5.5\\webapps\\MyApp\\WEB-INF\\classes\\hoz.xsl");
ReadMyFile obj=new ReadMyFile();
String xslResult=obj.getContents(testFile);
 OutputStream outcome=response.getOutputStream();
 String xmlSystemId = new File(resultHere).toURL().toExternalForm();
String xsltSystemId = new File(xslResult).toURL().toExternalForm();
XSLTProcessor processor =XSLTProcessorFactory.getProcessor();
 XSLTInputSource xmlInputSource =new XSLTInputSource(xmlSystemId);
 XSLTInputSource xsltInputSource =new XSLTInputSource(xsltSystemId);
 XSLTResultTarget resultTree =new XSLTResultTarget(outcome);
processor.process(xmlInputSource, xsltInputSource, resultTree);
 PrintWriter out=response.getWriter();
 response.setContentType("text/HTML");
 out.println("<html>");
 out.println("<title>SearchServlet</title>");
 out.println("<body>");
 out.println(""+resultHere+"");
 out.print(""+"AFTER RESULT"+outcome+"");
 out.println("</body>");
 out.flush();
//try end
 catch (Exception e)
//catch
 e.printStackTrace();
// catch end
//doGet Method ends
// class SearchServlet ends

You will need Xalan (from xml.apache.org) for this to work properly, and to create an instance of TransformationException and ConfigurationException:
static public void serialize(Document document, OutputStream target, boolean indent)
 throws IOException, ConfigurationException, TransformationException {
 try {
 Transformer transformer = TransformerFactory.newInstance().newTransformer();
 if (indent)
 transformer.setOutputProperty(OutputKeys.INDENT, "yes");
 transformer.transform(new DOMSource(document), new StreamResult(target));
 catch (TransformerConfigurationException configure) {
 throw new ConfigurationException("Error instantiating XML transformer", configure);
 catch (TransformerException transform) {
 /** @todo Need to write a generic transformation or serialization exception */
 throw new TransformationException("Error transforming XML", transform);
 }- Saish

Error in 2004s Transformation

Similar Messages

Maybe you are looking for