Error in 2LIS_02_SCL(pur.Data(DocumentScheduleLine Level)

hi
I am loading data for MM for 2LIS_02_SCL(pur.Data(DocumentScheduleLine Level) in status the error message is
"Entry MMC1 does not exist in T001W (check entry)".
When in Long text i found the Matter:
"Input value must be defined in table T001W the value or values MMC1 are not Specified in this table "
Procedure
"check wheathher the input is correct and correct if necessary"
The thing is that i dont know how to rectify this procedure
pls reply soon .
Thanks
Regards
Gurkiran

Ask you Basis team about this error, it seems like something is missing from that table itself.
Basis team will help you out.
Hope this helps.
Regards
Dennis
§§ Assign some Points if found Helpful §§

Similar Messages

In data packet level error like red and .......... like symbol how r?

hi expert,
in data packet level error like red and .......... like symbol how would i rectified
this type error please expert give me solution i will be give point friends bye

Hi
If it is the delta update,make the status of that on as STATUS NOT OK and repeat the infopackage again.if it is full run the IP simply.check the data has came to PSA or not,if it has came u push it manually to targets

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Error in Execution of Data Manager Package

Hi Folks,
We are facing the following error while executing the Data Manager Package for Clear/Import..
Error Details:
[Admin-ProcessPartition]Errors in the OLAP storage engine: The attribute key cannot be found: Table: dbo_tblFactFinance, Column: ENTITY, Value: CONEUROPE.
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
Errors in the OLAP storage engine: An error occurred while processing the 'FAC2Finance_INCR_UPDATE_TEMP_kmj3h_' partition of the 'Finance' measure group for the 'Finance' cube from the YASH6 database.
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
Internal error: The operation terminated unsuccessfully.
Please Look into it.....

Hello,
It looks like you have an inconsistency on the OLAP level. Please try to reprocess Entity dimension choosing full process for your application. This should solve the issue.
Best regards,
Mihaela

Language error while loading master data source for text

Hi,
We are getting the following error while loading the data in 0DISTR_CHAN_TEXT data source.
"Error during multibyte alignment for language D (position 2)".
Can we filter the data on the Language ( ='EN'). At the data source level LANGU field is marked for selection but still it is not available as filter at info package level.
Thanks
VV

Hey Vishal,
If the field is marked for Selection at data source level, then it must be available for selection in infopackage.
Try checking in RSA3 and see if it is available for selection over there. Let us know what was the output in R/3.
Regards,
Anjum.

Error occurred in the data selection,If i do Repeat, then it is working fin

Hi Freinds,
Here is the error message,
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Details Tab:
Extraction (messages): Errors occurred
Error occurred in the data selection ....
If i do Repeat Delta, then it is working fine.
As it is a daily load, manually repeating the load from the past 10 days.
Have tried using program RS_TRANSTRU_ACTIVATE_ALL.
Any inputs pls.....

Hi Friends,
Thanks for your valuable inputs, Problem is solved.
The Reason is that, there is a time difference in the r/3 system and bi system.
The tolerable time differene shud be only 60 seconds.
Basis guys took down time at the OS level and hav made the timers sync.....
The problem is on the source system GNP time differences
persists, which can cause the problem with delta upload .
Universal Time Coordinated UTC....: 1291187626
Date and time of database.........: 01.12.2010 12:46:59
Date and Time of R/3-Kernel.......: 01.12.2010 12:43:46
Date and Time of ABAP-Processor...: 01.12.2010 12:46:58
ABAP Time zone Setup ..............: 19800
Date and Time / local time ........: 01.12.2010 12:43:46
This leads to an exception of the delta processing, because this
tolerates a deviation of 60 seconds only (When the repeat is processed,
the "local time" in the ABAP is higher than the qrfc counter at the time when the delta was processed -> So a repeat works fine).
Please synchronize the timers like described in attached note 101726 and 741734 to eliminate the time difference .
With Regards
Badri Thiriveedhi.

From pl/sql table getting error - "ORA-01403: no data found"

Hi All,
i habe written package, and the spce define as -
type F761RecType is RECORD (
type F761TabType is TABLE of F761RecType INDEX BY BINARY_INTEGER;
l_F761_table F761TabType;
PROCEDURE modification1
p_F761_table IN F761TabType,
From button click of form i passed -
DECLARE
l_f761_table I743_PUC_MAPS_TREE_PKG.F761TabType;
l_counter number;
BEGIN
          LOOP
     l_counter :=l_counter+1;
          l_f761_table(l_counter).P_TABLE := :MAPS.P_table;
     EXIT WHEN      :SYSTEM.LAST_RECORD = 'TRUE' ;
next_record;
end loop;
i743_puc_maps_tree_pkg.modification1(
                                        p_F761_table => l_f761_table,
END;
Now when I take table count (l_f761_table.count) in button click in form level I am getting value; but when I try to get the count in sid the package, it giving error "ORA-01403: no data found".
Pls tell me where I am wrong ..!!
BR,
Subir

Thaks all, probls has been solved..

Is it a bug or just a typo in Agilent 532XX Series\Public\Data\Low Level\Fetch Measurement (Single).vi?

Hi, All
I am using Agilent 532XX Series driver to read data from a frequency counter. In the low level subVi : \Public\Data\Low Level\Fetch Measurement (Single).vi, "Scan From String" is used to convert the data.
however, if I check the error of this function, it always show me a error with current format string "%.;%g;". after I changed it to "%;%g", I don't get the error anymore.
If anyone use this funtion, please check the error out of that fuction and see what you get.
Regards
CQ

I don't have the instrument, so I can't reproduce it completely, but I've done some research and if there is an error I don't think it's in the string conversion itself. I say this because:
From what I can gather, a typical output string would be the following: +4.27150000E-03
I took just a "scan from string" node and gave it that string as a string input and %.;%g; as the format specifier string. This yielded a numeric value of 0.0042715
So, as far as actually finding the root of the problem, there could be a few things going on. My first thought is some form corruption causing the data received to not be valid for conversion. There are two ways of testing this:
Open up a test panel in MAX and perform a loopback test, as described here: http://www.ni.com/white-paper/3450/en/#toc4
-or-
Install and open NI IO Trace and view the bus traffic as detailed here: http://digital.ni.com/public.nsf/allkb/282C5D41E2BA04F2862574BA007803B9
If the loopback tests works properly, go ahead and run the IO trace and post the results here.
Christopher S. | Applications Engineer
Certified LabVIEW Developer
"If in doubt... flat out." - Colin McRae

Error Access denied(SBL-DAT-00553)

Hi
Whenever i try to edit a contact by adding an account to a contact record by clicking on the lookup icon of Account field on the Contact detail page ,(Owner is another user) i get the error SBL-DAT-00553. but i am able to edit any other fields in that particular record.
Has any one faced the same issue, Kindly help on this.
Thanks in advance.

Folks,
We have encountered this issue as well and have worked through the recommended corrective steps above (excluding reimporting which is not a viable option with the number of users and contact records we have).
We have also confirmed that any relative related information fields are not read-only on our page layouts; however, we have obtained no resolution. We will open a SR with customer care; however we are wondering if anyone on the forums here has a definitive corrective resolution for this specific access denied error.
From the contact record level, the only way we are able to associate an account is to be the logged user whom also owns the contact record.
We are able to associate the contact if we are under the account, even if we do not own the contact record. So, the reverse holds true as to associating a contact from the account while the user is NOT the record owner.
Any additional insight would be appreciated.
~Jennifer~

Error in load customer data

hello.
try to load customer data. run the task and got an error.
"error occurred in the data selection"
and warning:
"Processing (data packet): No data"
test infosource in rsa3, its return data.
when i try open infopackage text data, sap show message:
"Assign a language field to the IOBJ 0LANGU"
but when i try open attr infopackage its show nothing.
help plz. thank you!

as per my suggestion take d data upto PSA level 1st and edit the data (take the suggstion from conserned person what data that field contine).
I think it will be help......

OCI Error ORA-01403: no data found in oracle goldengate replication after tts instaniation

I recently migrated our tg core system from sun solaris(11.1.0.7) to linux (11.2.0.3) environment using goldengate method (transportable tablespace method used for instantiation).
The initial replication worked with HANDLECOLLISIONS and after I monitor the lag finished, I took Handlecollisions off and noticed discarded report with OCI Error ORA-01403: no data found in two replications.
I followed every step in the tts migration steps provided by oracle best practice.
Can anybody provide any clue how do I fix this issue?
Thank you in advance.

extract and replicat are on schema level.
DO I have to do anything for replication on schema level?
Basic trandata logging enabled on source.

Unknown error when i goto- "Data Transfer configuration" in DSWP....

Hi all,
In DSWP when i go into any solution and Service Plan->SAP deliveerd services and then click on Register solution at SAP it said profile parameters have to be set for login/create_sso2_ticket = 2 and login/accept_sso2_ticket = 1.
so i added in RZ10 and restarted.
Now I am getting Unknown error when i goto->"Data Transfer configuration" in DSWP....
Need ur inputs on this..
Subba

Hi,
I did check parameters....earlier it said
: Check the values of the two profile parameters and set them to suitable
 values, for example:
 login/create_sso2_ticket = 2
 login/accept_sso2_ticket = 1
 After setting the profile parameters (using transaction RZ10) you must
 restart the application server for the new values to become active.
i did that....but now i am getting unknown error....
SP level is okay...ST-PI level 0005
and ST-A/PI level J
Need inputs on this...
Thanks,
Subba

Arithmetic Overflow error converting float to data type numeric

Hi,
Am facing strange issue,I have function which returns money datatype and assigning the return money value to float datatype in table.
Error msg:
Msg 8115, Level 16, State 6, Procedure GBCalcCatalogPriceNewV2, Line 204
Arithmetic overflow error converting float to data type numeric.
The statement has been terminated.
Strange thing is the same stored procedure is working fine in production environment,but in the deveopment i see this error.Am scared if the same happens in the production environment.Please advice and advance
thanks
Regards
RAj

Strange thing is the same stored procedure is working fine in production environment,
How could that be strange? This is an error that occurs depending on the data. Accidents that are waiting to happen will happen sooner or later.
Then again, a development database may be more prone to such errors, because data that entered are completely out of whack with real life data. Still it is a warning sign. If you have some place where you convert data from float to numeric, you must consider
the risk that the float value is outside the range for the numeric data type. How do you prevent that from happening? Maybe a CHECK constraint on the column? Of if the data origins from a money column, use a numeric data type with sufficient precision.
Erland Sommarskog, SQL Server MVP, [email protected]

Migration issue - X-OWA-Error: SDServerErr;Microsoft.Exchange.Data.Storage.StoragePermanentException

Im in the middle of a rather large migration and a few users are see the below error when trying to log in to OWA:
X-OWA-Error: SDServerErr;Microsoft.Exchange.Data.Storage.StoragePermanentExceptionI cant find much on this error other than the enable inheritance permissions fix which all these accounts already have.Has anyone else come across this before?

Hi
This problem occurs because the discretionary access control list (DACL) inheritance is disabled on the user account in Active Directory. The Exchange Servers group must have permissions
to write the msExchUserCulture attribute on the user when the language has been specified in OWA.
To resolve this problem, follow these steps:
1. Open Active Directory Users and Computers.
2. Click View, and then click Advanced Features.
Note To make the Security tab available at both the user level and the organizational unit level, you must enable the Advanced Features option in Active Directory Users and Computers. This option is available under the View menu.
3. Open the properties for both the user level and the organizational unit level that the users are located in, and then locate the Security tab.
4. Click Advanced.
5. Make sure that the following check box is selected:
Allow inheritable permissions from the parent to propagate to this object and all child objects. Include these with entries explicitly defined here.
6. Force Active Directory replication.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you

Client level data & Plant level data

Dear ,
what exactly client level data & Plant level data.
In Material master Whats the reason that Purchasing is displaying in Client level data & also in Plant level data
*Client level Datas:--
Classification
Purchasing
Basic data
Storage
Plant level Datas:-
Accounting
MRP
Purchasing
Costing
Storage
Forecasting
Quality management
Sales
Regards,
Suresh.P

hi
the client level data is the field data which will be common for all plants
plant level data is the field data which is plant specific
also in purchasing view many fields are plant specific
to check it just do one goto mm03
give material and only select the pur view
at now give only plant and check fields
now repeate same without plant ,at this time u will see the client specific field
the UOM is the client level filed ,it is also in mRp view but as the mrp is used for plant it is in plznt specific data
hope it clears
regards
kunal

Error in 2LIS_02_SCL(pur.Data(DocumentScheduleLine Level)

Similar Messages

Maybe you are looking for