Error in a delivery reversal

Hi to you all. i am trying to reverse a returned delivery in a WM storage but an error message is coming out. since the retund delivery was completely done and the material is now located in a storage bin, when i try to reverse the delivery in Tx VL09 i am having an error messege that says : "the storage bin "& & &" doesnt exist (check your entries)" message number: L9009.
I tried to take the stock back to the interim storage bin"XXX 904 XXXXXXX" but this kind of interim storage work with dynamics storage bins and once you confirm a transfer order from a interim storage bin, then the interim storage bin vanishes from the system. so i cant put it back to where it was at the beggining. can any one help me put with this?
Thanks
Oscar Osorio

Hi,
I thought you should create a temporary storage bin with the delivery note number under storage type 904, after completed the return operation, delete it, that will be okay!
Good luck
Tao

Similar Messages

Error when trying to reverse a goods receipt using vl09

Hi All,
I'm trying to reverse an inbound delivery using vl09. Getting a message that
"Error at central message handling" . After this the system is throwing me out of the tcode vl09.
Any idea why this is appearing and how to overcome this.
Regards,
Ashwin

Hello
Please refer the previous thred
"Inbound delivery reversal issue
and also the SAP notes mentioned in earlier reply.
warm reards
Ramakrihsna

Error while creating delivery for STPO

Dear ALL,
I am facing the following error while creating delivery based on the purchase order.
""""Essential transfer parameters are missing in record""""
Pls help me how can I proceed further.
RGds
Babu

Hi
What is the document type for the purchase order ? It seems that we may take wrong PO number in delivery creation

SAP Note 144253 For error Enter valid delivery plant in sales order

Hi all,
I am getting the error "Enter valid delivery plant" while creating the sales order . This is due to Customer and plant are same .
For that I got one SAP Note 144253.
If anyone implimented this SAP note Could you please share is there any impact of this note after implimenting.
Thanks
CM

Hi,
Go to bellow links,
http://help.sap.com/saphelp_nw04/helpdata/en/60/8def3981fe5d7de10000000a114084/content.htm
http://www.sap-basis-abap.com/bc/steps-to-install-sap-note.htm
Thanks,
Raviteja

Error during Inbound Delivery creation by Idoc DELVRY05

Hi,
We are trying to consolidate ASNs and creating an inbound delivery for the same. Thus we have more than one PO information in the idoc.
It processes fine and creates an inbound delivery if all the line item nos are different.
But the issue is, when there are articles which have the same line item no. even if the articles are different and they are on different POs. It gives the following errors.
1) "Delivery item cannot be exactly determined
Message no. HUFUNCTIONS313"
I tried to debug the above error and found that while packing it looks to the lips-vbeln/posnr & not the PO nr./PO item.
I am not sure if this could be handled by some config. Please advice.
2) "V51VP - item was not found - process cancelled
Message no. HUGENERAL056"
Any hints or comments on the above would be appreciated.
Thanks & Regards,
Akshay

Hi Raghavendra,
It has been a long time. But, as far as I can remember we had made coding adjustments in the customer-exit EXIT_SAPLV55K_004, include ZXTRKU12 to fetch the correct item and fill the idoc segment fields.
This resolved the issue.
Best Regards,
Akshay

Error when creating Delivery

Hi experts,
I've received an error when creating Delivery from AR Reserve Invoice :
[Delivery - Rows - Warehouse Code][line: 0] , 'No matching records found '' (CRD1) (ODBC -2028)' [Message 131-183]
Don't know what is this, but some of the transaction in Delivery from AR Reserve invoice I mean no error.
Regards,

HI,
Pl. check the links of BP Master.
Set Bill to and ship to address manually for the Business Partner and set the new address as default .
Also check the settings of Items Default warehouse Etc.
Hope Helpful!!!

Error when creating delivery referenced by STO doc. from vl10b

Hi All,
We are getting an error when creating delivery as background from vl10b t-code referenced by STO. The error message " Global official numbering: Input parameter incomplete " .
Please give me a hand for this problem.
Thanks in advance for your helps.
Regards,

Hi,
One of the possibilities of the error could be
if i_BuKrs eq space or i_BuPla eq space or i_PostDate eq space.
i.e Compnay code or Posting date ro Business Place is Blank.
Please Take help of ABAPEr to resolve the isssue
Thanks
Murtuza

Error in VL01N(Delivery qty is greater than target qty while taking return)

Hi Experts,
I am facing a problem "Delivery Quantity is greater than the target quantity" while doing the inbound delivery from VL01N t-code for sales returns with reference to return order.
I am trying to do the inbound delivery for the same Quantity which is in return order but still it is showing error.
I have checked my configuration and could not find any mistake under this process. I am not able to identify the error. In my delivery item category we have put "B" under over delivery check which is our business requirement.
If I remove "B" from delivery item category, i am not getting any error in inbound delivery but which is not right way of doing.
I could not find suitable query in SDN. Can any one please share your expertise to solve this problem?
Thanks in advance,
Regards
Srinivas

You have to check the following:-
a) whether for that return delivery, picking is not activated
b) whether customer master or material master is maintained for over delivery tolerance
c) whether in VD51, any overdelivery tolerance is maintained
You can also have a look at the following notes:-
1) Note 151901 - Check of delivery quantity is consistent
2) Note 322588 - VLSP:incor.checks for qty to be delvrd during split
thanks
G. Lakshmipathi

Error when we try reverse a return delivery (SRM 7.0)

Hi Experts,
can we reverse a return delivery in SRM 7.0?
When we try to do that, we get this error message: Cancellation not possible, follow-on documents exit.
However we didn´t post any document after the return delivery.
Thanks,
Susana Agostinho

Hello Susana,
This is a standard bug:
[Note 1569913 - Cancellation of retun delivery not possible|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1569913]
Regards.
Laurent.

Delivery Reversal in WM

Dear All,
Whats the Process of returning the stock after reversing the outbound delivery using VL09 to the same bin from which it was picked ?
I tried the same using LT0G transaction & I was able to return the stock to the same bin using the Return to Stock option in LT0G but this works only if I do it before doing PGI.
When I tried the same thing after PGI & Reversal I am getting the following error
" Enter the storage unit type - L3043 "
Also If I have created a TO by removing stock from 3 bins before PGI then after reversing the delivery when I try LT0G, I am getting a padlock symbol for the first two bins & when I try to process the third bin I am getting the above error.
I am trying this scenario in ECC 5.0.
Many SAP notes are available for LT0G transaction. If its a standard system error can anyone suggest some SAP notes relevant to the above SAP version.
Hope its clear.
Thanks & Regards,

Dear Vineet,
Thanks a lot for the response.
I agree that using LT01 we can create a TO by specifying the source & destn bins.
But my requirement is to return the stock using LT0G after cancelling/reversing a delivery doc using VL09.
when I try this I am facing 2 errors.
1. System is showing an error message to enter the storage unit type (Note - I have already maintained the same in my material master)
2. Even after reversing the delivery using VL09, when I do LT0G there is no quantity shown in the available stock field. Hence I am not able to process the document.
Hope its clear.
Dear Csaba,
Please note that I am using the ECC 5.0 version.
As per your above suggestions I have checked the following notes which are related to the above mentioned issues
400764
318529
535803
But all the above notes are valid upto release 4.7.
If you can suggest some Valid SAP notes for the above issues, it will be very helpful.
Appreciate your continous support.
Thanks & Regards,

Handling unit delivery reversal with VL09 in ECC 6.0

Dear All,
We have created few deliveries which has handling unit & packing. However now these deliveries are to be reversed or cancel due to the adress change.
These deliveries are created when we had 4.7 version but this month we upgraded the system to ECC 6.0. Now when I am trying to cancel delivery with VL09 transaction code system is popping the error up as "HU items' material posting is inconsistent".
I came to know that there is some change in standard process of handling deliveries in SAP 4.7 & ECC 6.0. I just would like to have details of it.
Regards,

Hi,
What kind of deliveries are you handling? Deliveries for sales order or for Stock transport orders?
Note 992460 - VL09 fails with error message HUGENERAL 327 describes the symptoms but seems to be valid only for IS Retail systems.
What's the status of HU saying? Check HU numbers in outboud delivery for that.
MdZ

Return Delivery - reversal

Hello Gurus,
I have created a return order , I created a return delivery and did PGR. Delivery document and material document is created. Now when i am going to to do reversal of this return delivery through transaction VL09 . The system is throwing a error message that "No material document could be found for cancellation" and i cannot process the reversal of the PGR
Help!!!
Thanks
Ganesh Somasundaram

Hi,
I tried the material doc through MBST , system throws the message " Material document cannot be processed " -
explanation
This material document was generated through the posting of a physical inventory document, a delivery via Shipping, or some other automatic movement (such as an order confirmation in PP or a usage decision in QM) and cannot be processed with this function.
I tried VL09, where its throwing a message " material document could be found for cancellation " .
Thanks

Error in Inbound delivery using 'BAPI_INB_DELIVERY_CHANGE'

Hi,
I want to delete Inbound delivery.i got the erro that document cant be deleted(VL-66), how to correct this
I passed the belwo entry. let me know if i m missing anything.
I tried with and withou item_data and item_control(as i have commented) but no use.
i just want to delete the inbound delivery say evry thing be 0 so i was passing 0 as quantity
wa_inb_head-deliv_numb = '0180036237'.
    wa_inb_ctrl-deliv_numb = '0180036237'.
     wa_inb_ctrl-dlv_del    = 'X'.
      wa_inb_delivery             = '0180036237'.
wa_item_ctrl-DELIV_NUMB = '0180036237'.
wa_item_ctrl-CHG_DELQTY = 'X'.
append wa_item_ctrl to it_ctrl.
*wa_data-DELIV_NUMB = '0180036237'.
       wa_data-DLV_QTY = '0'.
*wa_data-DLV_QTY_IMUNIT = '0'.
*append wa_data to it_data.
     CALL FUNCTION 'BAPI_INB_DELIVERY_CHANGE'
          EXPORTING
            HEADER_DATA                = wa_inb_head
            HEADER_CONTROL             = wa_inb_ctrl
            DELIVERY                   = wa_inb_delivery
          TABLES
           item_data          = it_data
           item_control             = it_ctrl
           RETURN                     = it_bapiret2.

Please check the inbound delivery you are trying to delete is not having goods receipt status as 'completed' OR not having HANDLING UNITS assigned to it.
In any of the above case, please reverse the goods receipt first, then unassign the handling units and then try to delete the inbound delivery. In my opinion, there should be no need to change the qty to 0 and just delete the inbound delivery should work.
In case you still encounter an error, try deleting the delivery using VL32n and you should get a clear error/problem for your case.

Inbound delivery reversal issue

Hi,
When user tried to reverse inbound delivery in VL09, system shows error message M7265.Gr is done for PO.ts HU managed.
Is there any option...
regards....

Can you please check in inbound delivery document flow is Goods receipt process is completed.If yes check the Handling units stsus is it availble in your ware house with out change.
If delivery goods receipt is not completed then unassign the handling units from inbound delivery then delete inbound delivery.

Returns Delivery Reversal

Hello Everyone,
I have a returns delivery which I need to reverse. However, in VL09, I am encountering this error:
"Deficit of BA Ret.blocked prev. 37,941.000 EA : <Material> <Plant> <Stor Location> <Batch>
Shortfall below the specified stock level or quantity amounting to 37,941.000 EA."
When I checked MMBE, there is zero stock for this material/batch. What is the best way so I could reverse the returns delivery?
Thanks a lot for your time!
Regards,
Olyn

Hi Olyn,
In this scenario you can't cancel the earlier material document which is created at the time of PGR ( i.e. Return Delivery). Becasue the stock which is returned is used by some one.
So to cancel this return delivery you need to full fill the same delivery qty in the plant against the same batch. Either do the Material to material transfer or else.
If you can't able to do this there only one option you can able to do is you need to cancel the previous Material document which is created at the time of PGR.. through MBST. At this time system through the error message saying that Material document cannot be processed with error message M7130.
Change the ctaegory from error to Warning against this message in OMCQ and process it it may useful. But it may impact ur stock levels.
Please co ordinate the same with team member and process it..
Regards
Durga Sana

Error in a delivery reversal

Similar Messages

Maybe you are looking for