Error in ABAP Docs 2.0 tool
Hello Experts,
Have anyone tried ABAP Docs 2.0 tool in SAP version 4.7?
This is a good tool. Actually we have a plan to include this tool and customize it for our purpose. But while installing the tool, i found some issues. So, i seek some clarifications.
Is the ABAP Docs tool only applicable for Ecc 6.0 and above? Since the documentation of this tool has all the screen shots of ECC 6.0 system.
I have tried it in SAP version 4.7. While executing "ABAP Docs 2.1 Cockpit" transaction, it goes for a short dump, stating that SAP_BOOL (data type used in public section of class ZFLC_ALV_GRID_GC) is not available. SAP_BOOL data type doesnot exist in SAP v4.7. But it is available in SAP ECC 6.0. I have checked it.
Since, this is one of the errors i found, i seek your valuable clarifications regarding the following:
What are the pros and concerns to be taken care, when i need to install the tool in SAP v4.7? What are all the issues i will face other than the error SAP_BOOL?
Please help me with your valuable suggestions.
Thanks and Best Regards,
Suresh
Hello experts,
Please help me... It is an important task...
I find someother issues also.
Any helpful measures please.
Best Regards,
Suresh
Similar Messages
-
Hello Experts,
Have anyone tried ABAP Docs 2.1 tool in SAP version 4.7?
While installing the tool, i found some issues for which i need some clarifications.
Is the ABAP Docs tool only applicable for Ecc 6.0 and above? Since the documentation of this tool has all the screen shots of ECC 6.0 system.
I have tried it in SAP version 4.7. While executing "ABAP Docs 2.1 Cockpit" transaction, it goes for a short dump, stating that SAP_BOOL (data type used in public section of class ZFLC_ALV_GRID_GC) is not available. SAP_BOOL data type doesnot exist in SAP v4.7. But it is available in SAP ECC 6.0. I have checked it.
What are the pros and concerns to be taken care, when i need to install the tool in SAP v4.7? What are all the issues i will face other than the error SAP_BOOL?
Please help me with your valuable suggestions.
Thanks and Best Regards,
SureshNo proper responses.
-
Error during ABAP 7.01 trial version install on Vista - installation exited
im re-installing NSP trial version for the 5th time and get the error below. I followed all instructions:
- removed old installation folders
- removed th port numbers in services
- switched off AV and firewall
- removed entries from registry
- ran the regtool
- rebooted system
but still get the error below - can you please help
details
win vista enterprise SP1
intel dual core 2.8 GHz
RAM 2GB
100GB free space
32 bit os
im on a netwkr so no need for the loopback...
(May 18, 2010 6:32:25 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(May 18, 2010 6:32:25 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/XXXXX/AppData/Local/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/whittyj/AppData/Local/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
from /AppData/Local/Temp/MaxDBSAPNWPREV.log
Tue May 18 18:32:24 GMT 2010 MaxDB sdbinst: checking unpacked archive... ok
Tue May 18 18:32:24 GMT 2010 MaxDB sdbinst: installation of MaxDB Software finished successfully Tu, May 18, 2010 at 13:32:23
Tue May 18 18:32:24 GMT 2010 MaxDB sdbinst: creating database NSP...
Tue May 18 18:32:24 GMT 2010 MaxDB sdbinst: getInstalledReleasesWin(): wrong version format
Tue May 18 18:32:24 GMT 2010 MaxDB sdbinst: ERROR: Backup check for 'C:\sapdb\NSP\_tempLocation\load\load_datasave' failed:
Tue May 18 18:32:24 GMT 2010 MaxDB sdbinst: File not found: C:\sapdb\NSP\_tempLocation\load\load_datasave
Tue May 18 18:32:25 GMT 2010 MaxDB sdbinst: installation exited abnormally at Tu, May 18, 2010 at 13:32:23
Tue May 18 18:32:25 GMT 2010 MaxDB: Error during call to sdbinst, rc= 1
Tue May 18 18:32:25 GMT 2010 MaxDB: Done with call_sdbinst
Tue May 18 18:32:25 GMT 2010 MaxDB: rc of sdbinst = 1
Tue May 18 18:32:25 GMT 2010 MaxDB: Start of CallSdbuninst
Tue May 18 18:32:25 GMT 2010 MaxDB: IndepProgPath: C:/sapdb/programs
Tue May 18 18:32:25 GMT 2010 MaxDB: dbmcli path: C:/sapdb/programs/pgm/dbmcli.exe
Tue May 18 18:32:25 GMT 2010 MaxDB: Calling check for db_enum in case of an abort
Tue May 18 18:32:28 GMT 2010 MaxDB: nsp doesn't exist. Nothing to do !
Tue May 18 18:32:28 GMT 2010 MaxDB: rc of Method: 3
Tue May 18 18:32:28 GMT 2010 MaxDB: IndepProgPath = C:/sapdb/programs
MaxDB: dbmcli_path = C:/sapdb/programs/pgm/dbmcli.exe
MaxDB: Database instance to drop: :NSP:
MaxDB: Instroot of NSP is: null
MaxDB: sdbuninst_option = :3
MaxDB: 0=uninstall all, 1=uninstall Kernel package, 2=drop database only, 3=do nothing
Tue May 18 18:32:28 GMT 2010 MaxDB: End of CallSdbuninst
Tue May 18 18:32:28 GMT 2010 MaxDB: End of uninstallation
Edited by: Joe Whitty on May 18, 2010 8:54 PMI a similar problem several times trying to get my AbapTrial version to work but then everything was successful as below:
i. windows command regedit ->software and delete the whole SAP folder
ii. at least disable the services (I had old SAP.. entries) (you did windows command sc delete)
iii. I had an NSP version and so deleted the whole of C:SAP folder and c:sapdb folder
iv. I went to windows software management and removed the trial version or went to Start->Programs and deleted the Trial version there.
v. In Start->Programs->MaxDB (or, once, in software management) I deleted all MaxDB entries.
As far as I remember everything was then removed.
The successful installation then was as follows:
I successfully downloaded from http://www.sdn.sap.com/irj/scn/nw-downloads and successfully ran the installation:
1) the download wasnt possible the first few times I tried - the download popup did not appear and I received a message with the word "scnsorry" instead. I just had to keep trying.
2) I downloaded the entry
"SAP NetWeaver 7.01 SR1 SP3 ABAP Developer Edition ".
Another entry, also offered for download, "SAP NetWeaver 7.01 - ABAP Trial Version " did not install and seemed to be in error. (Installed "successfully" in just 4 minutes and showed no MaxDB files in the unzipped folder).
3) I followed the instructions and the installation (some 27 steps) ran for 7 hours.
4) I am on a laptop with Windows Vista 6.0 Build 6002 SP2. (It is in German, not English, but this was not a problem, although it is sometimes mentioned that one should use an english-language OS).
5) After installation I could log on at once.
I recommend this way because it saves so much time.
What put me on the right path was a comment by Markus Doehr on In AbapTrial7.01 NSP the Dispatcher stops after 1:15 minutes. -
How to check syntax errors in ABAP Queries
HI Guys,
How to check syntax errors in ABAP queries, Can please provide the T-Codes.
Advande thanks to everybody.
Thanks,
GourisankarHi
with these you can check syntax errors and performance points
Hi
these all are doing t he same thing that is checking the program for better performance
Tools for Performance Analysis
Run time analysis transaction SE30
SQL Trace transaction ST05
Extended Program Check (SLIN)
Code Inspector ( SCI)
Run time analysis transaction SE30 :This transaction gives all the analysis of an ABAP program with respect to the database and the non-database processing.
SQL Trace transaction ST05: The trace list has many lines that are not related to the SELECT statement in the ABAP program. This is because the execution of any ABAP program requires additional administrative SQL calls. To restrict the list output, use the filter introducing the trace list.
The trace list contains different SQL statements simultaneously related to the one SELECT statement in the ABAP program. This is because the R/3 Database Interface - a sophisticated component of the R/3 Application Server - maps every Open SQL statement to one or a series of physical database calls and brings it to execution. This mapping, crucial to R/3s performance, depends on the particular call and database system. For example, the SELECT-ENDSELECT loop on a particular database table of the ABAP program would be mapped to a sequence PREPARE-OPEN-FETCH of physical calls in an Oracle environment.
The WHERE clause in the trace list's SQL statement is different from the WHERE clause in the ABAP statement. This is because in an R/3 system, a client is a self-contained unit with separate master records and its own set of table data (in commercial, organizational, and technical terms). With ABAP, every Open SQL statement automatically executes within the correct client environment. For this reason, a condition with the actual client code is added to every WHERE clause if a client field is a component of the searched table.
To see a statement's execution plan, just position the cursor on the PREPARE statement and choose Explain SQL. A detailed explanation of the execution plan depends on the database system in use.
Extended Program Check
This can be called in through transaction SE38 or through transaction SLIN. This indicates possible problems that may cause performance problems.
Code Inspector (SCI)
You can call the Code Inspector from the ABAP Editor (SE38), the Function Builder (SE37), the Class Builder (SE24), or as a separate transaction (SCI).
The Code Inspector indicates possible problems. However, note that, especially with performance issues: There is no rule without exception. If a program passes an inspection, it does not necessarily mean that this program will have no performance problems.
reward if usefull -
How to import .E60 files(ABAP Doc 2.1)
the readme file says:
"Ask your BASIS consultant to import these files to your SAP development system. "
files:K901003.E60
R901003.E60
I don't know how to import,can anyone tell me ?thanks!thanks for your reply,
I did what you say step one,
but the step two I can't find the path,
and the readme file says:
Since ABAP Docs is a development tool for ABAP developers, it should be installed only on the SAP development box. There is no need to move it to SAP Q&A and production systems.
so,is it need to do step two:"Now login to sap level go to STMS -> Extras -> Add request -> enter the request and import"?
thanks ! -
error analysis as in ST22 TRANSACTION:
AN EXCEPTION OCCURED THE EXCEPTION ASSIGNED TO CLASS CX_SY_CONVERSION_NO_NUMBER WAS NOT CAUGHT WHICH LED TO AN ERROR. THE REASON FOR THIS EXCEPTION IS :
THE PROGRAM TRIED TO INTERPRET VALUE ':4' AS NUMBER SINCE THE VALUE CONTRAVENES THE CORRECT NUMBER FORMAT THIS WAS NOT POSSIBLE.
ATTACHED IS MY PROGRAM
REPORT ZVXR0303
LINE-COUNT 60(3)
LINE-SIZE 132
MESSAGE-ID VN.
Tables: VBEP, VBAP, NAST.
DATA: BEGIN OF HEADER,
ORDER(15) VALUE 'ORDER',
LINE(5) VALUE 'LINE',
MATERIAL(14) VALUE 'MATERIAL',
DUE(15) VALUE 'DUE (MAD)',
CREATED(10) VALUE 'CREATED',
QTY(10) VALUE 'QUANTITY',
KEY(5) VALUE 'KEY',
TYPE(5) VALUE 'TYPE',
END OF HEADER.
DATA: Begin of IDAT OCCURS 0,
VBELN LIKE VBAP-VBELN,
POSNR LIKE VBAP-POSNR,
werks LIKE VBAP-WERKS,
cuobj LIKE vbap-CUOBJ,
MBDAT LIKE vbep-mbdat,
ERDAT LIKE VBAP-ERDAT,
MATNR LIKE VBAP-MATNR,
KWMENG LIKE VBAP-KWMENG,
QTY TYPE I,
END of IDAT.
class cl_abap_char_utilities definition load.
constants: tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
DATA: t_record(1000) TYPE C.
DATA: C_KWMENG(20) TYPE C.
data: OUTFILE(50) value '/usr/users/ftpsapfi/locks_540318'.
DATA: BEGIN OF TKOMCON OCCURS 50.
INCLUDE STRUCTURE CONF_OUT.
DATA: END OF TKOMCON.
DATA: iKEY TYPE I,
offset TYPE I,
KeyTypeLOC TYPE I,
KeyNumberLOC TYPE I,
type(15) TYPE C.
select-options: sVBELN FOR VBEP-VBELN obligatory,
sMAD FOR VBEP-MBDAT obligatory,
sERDAT FOR VBAP-ERDAT,
sMATNR FOR VBAP-MATNR,
sWERKS FOR VBAP-WERKS,
sKWMENG FOR VBAP-KWMENG.
SELECT
vbap~vbeln
vbap~POSNR
vbap~werks
vbap~cuobj
VBEP~MBDAT
VBAP~ERDAT
VBAP~MATNR
VBAP~KWMENG
INTO CORRESPONDING FIELDS of IDAT
FROM ( VBEP INNER JOIN VBAP ON vbepvbeln = vbapvbeln
AND vbepposnr = vbapposnr )
WHERE BMENG > 0
AND vbep~MBDAT IN sMAD
AND VBEP~VBELN in sVBELN
AND VBAP~werks IN sWERKS
AND VBAP~ERDAT IN sERDAT
AND VBAP~MATNR IN sMATNR
AND VBAP~KWMENG IN sKWMENG
AND VBAP~ABGRU = SPACE.
APPEND IDAT.
ENDSELECT.
PERFORM TOP-OF-PAGE.
if sy-batch = 'x'.
OPEN DATASET OUTFILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
TRANSFER t_record TO OUTFILE.
endif.
IF SY-SUBRC = 0.
LOOP at IDAT.
write IDAT-KWMENG DECIMALS 0 TO C_KWMENG.
REFRESH TKOMCON.
CALL FUNCTION 'VC_I_GET_CONFIGURATION'
EXPORTING
INSTANCE = idat-cuobj
LANGUAGE = NAST-SPRAS
TABLES
CONFIGURATION = TKOMCON
EXCEPTIONS
OTHERS = 4.
LOOP AT TKOMCON
WHERE ATNAM = 'S_SK_SPEC_KEY' OR ATNAM = 'S_MK_SPEC_KEY'
OR ATNAM = 'S_SK_CONSC_KEY' OR ATNAM = 'S_MK_CONSC_KEY'.
IF TKOMCON-ATNAM = 'S_SK_CONSC_KEY'
OR TKOMCON-ATNAM = 'S_MK_CONSC_KEY'.
KeyTYPELOC = 0.
keynumberloc = 2.
TRANSLATE TKOMCON-ATWRT+KeyNumberLOC(4) USING ': '.
IF TKOMCON-ATWRT+KeyNumberLOC(4) CO '0123456789 '.
iKey = TKOMCON-ATWRT+KeyNumberLOC(4).
IF ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'FR' AND iKey >= 454 )
OR ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'XF' AND iKey >= 1150 ).
PERFORM OUT-OF-RANGE-FOUND.
ENDIF.
ENDIF.
Else.
Offset = 0.
DO.
IF offset <= 9.
offset = offset + 1.
If TKOMCON-ATWRT+Offset(1) = ':'.
KeyTypeLOC = Offset + 1.
KeyNumberLOC = Offset + 3.
EXIT.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
TRANSLATE TKOMCON-ATWRT+KeyNumberLOC(4) USING ': '.
IF TKOMCON-ATWRT+KeyNumberLOC(4) CO '0123456789 '.
iKey = TKOMCON-ATWRT+KeyNumberLOC(4).
IF ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'FR' AND iKey >= 454 )
OR ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'XF' AND iKey >= 1150 ).
IDAT-KWMENG = TKOMCON-ATWRT(3).
PERFORM OUT-OF-RANGE-FOUND.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDLOOP.
ENDIF.
CLOSE DATASET OUTFILE.
FORM OUT-OF-RANGE-FOUND *
FORM OUT-OF-RANGE-FOUND.
WRITE: / IDAT-VBELN.
WRITE: 10 IDAT-POSNR.
WRITE: 20 IDAT-MATNR.
WRITE: 35 IDAT-MBDAT.
WRITE: 50 IDAT-ERDAT.
WRITE: 65(3) IDAT-KWMENG DECIMALS 0.
WRITE: 75 TKOMCON-ATWRT+KeyTypeLOC(6).
IF TKOMCON-ATNAM = 'S_SK_CONSC_KEY'
OR TKOMCON-ATNAM = 'S_MK_CONSC_KEY'.
WRITE: 85 'Consecutive'.
ELSE.
WRITE: 85 'Specific'.
ENDIF.
IF TKOMCON-ATNAM = 'S_SK_CONSC_KEY'
OR TKOMCON-ATNAM = 'S_MK_CONSC_KEY'.
TYPE = 'Consecutive'.
ELSE.
TYPE = 'Specific'.
ENDIF.
* PREPARING A RECORD TO BE SENT TO FILE
CONCATENATE
IDAT-VBELN
IDAT-POSNR
IDAT-MATNR
IDAT-MBDAT
IDAT-ERDAT
C_KWMENG
TKOMCON-ATWRT+KeyTypeLOC(6)
TYPE
INTO t_record SEPARATED BY tab.
if sy-batch = 'x'.
TRANSFER t_record TO OUTFILE.
endif.
ENDFORM.
FORM TOP-OF-PAGE *
FORM TOP-OF-PAGE.
WRITE: / 'ORDER'.
WRITE: 10 'LINE'.
WRITE: 20 'MATERIAL'.
WRITE: 35 'DUE (MAD)'.
WRITE: 50 'CREATED'.
WRITE: 65 'QTY'.
WRITE: 75 'KEY'.
WRITE: 85 'TYPE'.
PREPARING A RECORD TO BE SENT TO FILE
CONCATENATE
header-ORDER
header-LINE
header-MATERIAL
header-DUE
header-CREATED
header-QTY
header-KEY
header-TYPE
INTO t_record SEPARATED BY tab.
ENDFORM.
THIS IS WORKING FINE WITH DIFFERENT RANGES BUT WHEN I USE RANGE
Sales Order 1250000 TO 2250000
MAD 01/18/2005 TO 03/02/2005
Material LOCK9250FR TO LOCK9250XF
PLANT 4500
IT GIVES THE RUNTIME ERROR I MENTIONED ABOVE
ANY HELP WOULD BE GREATLY APPRECIATED
THANKS.HI ROB YOUR REPLY LOOKS TO BE VERY CLOSE OTHER GUYS SAID IT MIGHT BE PROBLEM WITH VARIABLE C_KWMENG BUT I REMOVED THAT PIECE OF CODE WITH C_KWMENG BUT STILL I WAS GETTING THE ERROR ATTACHED IS THE COMPLETE ERROR DETAILS FROM ST22
Runtime Errors CONVT_NO_NUMBER
Exception CX_SY_CONVERSION_NO_NUMBER
Occurred on 09/29/2005 at 14:33:21
Unable to interpret "04:" as a number.
What happened?
Error in ABAP application program.
The current ABAP program "ZVXR0303" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception will be dealt with in more detail
below. The exception, assigned to the class 'CX_SY_CONVERSION_NO_NUMBER', was
not caught, which
led to a runtime error. The reason for this exception is:
The program attempted to interpret the value "04:" as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
How to correct the error
Integers are represented in ABAP using a sequence of digits and, in some
cases, a preceding sign.
The system offers the following options for displaying floating point
numbers:
[mantissa]E[sign][exponent]
[whole number part].[fractional part]
e.g. -12E+34, +12E-34, 12E34, 12.34
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"CONVT_NO_NUMBER" CX_SY_CONVERSION_NO_NUMBERC
"ZVXR0303" or "ZVXR0303"
"START-OF-SELECTION"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "grrsap54"
Network address.......... "10.80.96.102"
Operating system......... "HP-UX"
Release.................. "B.11.11"
Hardware type............ "9000/800"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 3
Short dump setting....... "full"
Database server.......... "grrsap54"
Database type............ "ORACLE"
Database name............ "D01"
Database owner........... "SAPR3"
Character set............ "en_US.iso88591"
SAP kernel............... "640"
Created on............... "Aug 28 2005 20:25:49"
Created in............... "HP-UX B.11.00 A 9000/800"
Database version......... "OCI_920 "
Patch level.............. "88"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE
10.1.0.."
SAP database version..... "640"
Operating system......... "HP-UX B.11"
User, transaction...
Client.............. 050
User................ "NSHAKER"
Language key........ "E"
Transaction......... "SE38 "
Program............. "ZVXR0303"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "ZVXR0303" in
"START-OF-SELECTION".
The main program was "ZVXR0303 ".
The termination occurred in line 156 of the source code of the (Include)
program "ZVXR0303"
of the source code of program "ZVXR0303" (when calling the editor 1560).
Source code extract
Caution: Program has changed
Caution: At time of termination, Active source code no longer available
001260 ? TRANSLATE TKOMCON-ATWRT+KeyNumberLOC(4) USING ': '.
001270 ? IF TKOMCON-ATWRT+KeyNumberLOC(4) CO '0123456789 '.
001280 ? iKey = TKOMCON-ATWRT+KeyNumberLOC(4).
001290 ?
001300 ? IF ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'FR' AND iKey >= 454 )
001310 ? OR ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'XF' AND iKey >= 1150 ).
001320 ? PERFORM OUT-OF-RANGE-FOUND.
001330 ? ENDIF.
001340 ? ENDIF.
001350 ? Else.
001360 ? Offset = 0.
001370 ? DO.
001380 ? IF offset <= 9.
001390 ? offset = offset + 1.
001400 ? If TKOMCON-ATWRT+Offset(1) = ':'.
001410 ? KeyTypeLOC = Offset + 1.
001420 ? KeyNumberLOC = Offset + 3.
001430 ? EXIT.
001440 ? ENDIF.
001450 ? ELSE.
001460 ? EXIT.
001470 ? ENDIF.
001480 ? ENDDO.
001490 ?
001500 ? TRANSLATE TKOMCON-ATWRT+KeyNumberLOC(4) USING ': '.
001510 ?
001520 ? IF TKOMCON-ATWRT+KeyNumberLOC(4) CO '0123456789 '.
001530 ? iKey = TKOMCON-ATWRT+KeyNumberLOC(4).
001540 ? IF ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'FR' AND iKey >= 454 )
001550 ? OR ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'XF' AND iKey >= 1150 ).
? IDAT-KWMENG = TKOMCON-ATWRT(3).
001570 ? PERFORM OUT-OF-RANGE-FOUND.
001580 ? ENDIF.
001590 ? ENDIF.
001600 ? ENDIF.
001610 ? ENDLOOP.
001620 ? ENDLOOP.
001630 ? ENDIF.
001640 ? CLOSE DATASET OUTFILE.
001650 ?
001660 ? *----
001670 ? * FORM OUT-OF-RANGE-FOUND *
001680 ? *----
001690 ? * ........ *
001700 ? *----
001710 ? FORM OUT-OF-RANGE-FOUND.
001720 ?
001730 ? WRITE: / IDAT-VBELN.
001740 ? WRITE: 10 IDAT-POSNR.
001750 ? WRITE: 20 IDAT-MATNR.
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 44
SY-TABIX 7 SY-DBCNT 1
SY-FDPOS 4 SY-LSIND 0
SY-PAGNO 2 SY-LINNO 18
SY-COLNO 94 SY-PFKEY
SY-UCOMM SY-TITLE Out of Range Keys
SY-MSGTY I SY-MSGID SF
SY-MSGNO 616 SY-MSGV1
SY-MSGV2 SY-MSGV3
SY-MSGV4
Active calls / events
No.... Type........ Name..........................
Program
Include Line
Class
1 EVENT START-OF-SELECTION
ZVXR0303
ZVXR0303 156
Chosen variables
1 EVENT START-OF-SELECTION
ZVXR0303
ZVXR0303 156
%_SPACE
2
0
SY-REPID ZVXR0303
5555333322222222222222222222222222222222
A682030300000000000000000000000000000000
TKOMCON-ATWRT 04:XF1260
333543333222222222222222222222
04A861260000000000000000000000
KEYNUMBERLOC 5
0000
0005
SYST-REPID ZVXR0303
5555333322222222222222222222222222222222
A682030300000000000000000000000000000000
SY-LDBPG SAPDB__S
5454455522222222222222222222222222222222
31042FF300000000000000000000000000000000
IKEY 1260
000E
004C
KEYTYPELOC 3
0000
0003
SY ###,####################################
0002000000000001000000000000000000000000
000C00020007000E00000001000A000000000000
... + 40 ###########^###<########################
0000000000050003000100080000000000000009
00010004000E000C000200040000000000000000
... + 80 ########################################
0000000000000000000000000000000000000000
0000000000000000000A00000000000000000000
... + 120 #######################################_
0000000000000000000000000000000000010005
00000000000000000000000000000000000A000F
... + 160 ############ÿÿ¹°XC############# E2 X1
000000000000FFBB540000000000000222432253
0000000A0000FF90830040000C0000C000520081
... + 200 000 ####__S 050
3332222222220000555222222222222222223332
0000000000000000FF3000000000000000000500
... + 240 00
222223322222222
000000000000000
SVBELN IBT00012500000002250000
44533333333333333333333
92400012500000002250000
IDAT-KWMENG ########
00000000
0000000C
TKOMCON-ATWRT+0(3) 04:
333
04A
SYST ###,####################################
0002000000000001000000000000000000000000
000C00020007000E00000001000A000000000000
... + 40 ###########^###<########################
0000000000050003000100080000000000000009
00010004000E000C000200040000000000000000
... + 80 ########################################
0000000000000000000000000000000000000000
0000000000000000000A00000000000000000000
... + 120 #######################################_
0000000000000000000000000000000000010005
00000000000000000000000000000000000A000F
... + 160 ############ÿÿ¹°XC############# E2 X1
000000000000FFBB540000000000000222432253
0000000A0000FF90830040000C0000C000520081
... + 200 000 ####__S 050
3332222222220000555222222222222222223332
0000000000000000FF3000000000000000000500
... + 240 00
222223322222222
000000000000000
OUTFILE /usr/users/ftpsapfi/locks_540318
2777277677267776766266667533333322222222
F532F53523F64031069FCF3B3F54031800000000
... + 40
2222222222
0000000000
Application Calls
No dump information available
Application Information
No dump information available
Internal notes
The termination occurred in the function "ab_Move" of the SAP
Basis System, specifically in line 529 of the module
"//bas/640_REL/src/krn/runt/abmove1.c#6".
The internal operation just processed is "MOVE".
The internal session was started at 20050929142552.
Active calls in SAP kernel
( 0) 0x4000000001751924 CTrcStack2 + 0x2bc dw.sapD01_DVEBMGS00
( 1) 0x4000000001751658 CTrcStack + 0x18 dw.sapD01_DVEBMGS00
( 2) 0x4000000001db7478 rabax_CStackSave__Fv + 0x100 dw.sapD01_DVEBMGS00
( 3) 0x4000000001dc3abc ab_rabax + 0x1e1c dw.sapD01_DVEBMGS00
( 4) 0x4000000001b44cb4 ab_cnverr__FiPcPCvN21T2 + 0x18c dw.sapD01_DVEBMGS00
( 5) 0x40000000016c96f8 ab_Move + 0x1910 dw.sapD01_DVEBMGS00
( 6) 0x40000000016d4434 ab_jmove__Fv + 0x384 dw.sapD01_DVEBMGS00
( 7) 0x4000000001022348 ab_extri__Fv + 0x17a0 dw.sapD01_DVEBMGS00
( 8) 0x4000000001726dc8 ab_xevent__FPCc + 0x38 dw.sapD01_DVEBMGS00
( 9) 0x40000000019f7efc ab_trigg__Fv + 0x94 dw.sapD01_DVEBMGS00
(10) 0x40000000019dc9ec ab_run + 0xc4 dw.sapD01_DVEBMGS00
(11) 0x4000000000f65e0c N_ab_run + 0x14 dw.sapD01_DVEBMGS00
(12) 0x4000000000f5fa88 dynpmcal + 0x198 dw.sapD01_DVEBMGS00
(13) 0x4000000000f5d500 dynppai0 + 0x830 dw.sapD01_DVEBMGS00
(14) 0x4000000000f5b8b4 dynprctl + 0x43c dw.sapD01_DVEBMGS00
(15) 0x4000000000f56728 dynpen00 + 0x2118 dw.sapD01_DVEBMGS00
(16) 0x400000000102f1b4 Thdynpen00 + 0x69c dw.sapD01_DVEBMGS00
(17) 0x400000000102e1e4 TskhLoop + 0x523c dw.sapD01_DVEBMGS00
(18) 0x4000000001022f50 tskhstart + 0x1e0 dw.sapD01_DVEBMGS00
(19) 0x4000000000dce3c4 DpMain + 0x484 dw.sapD01_DVEBMGS00
(20) 0x40000000022784cc nlsui_main + 0x14 dw.sapD01_DVEBMGS00
(21) 0x4000000000a39534 main + 0x14 dw.sapD01_DVEBMGS00
(22) 0xc00000000000a588 $START$ + 0xa0 /usr/lib/pa20_64/dld.sl
List of ABAP programs affected
Type Program Gen. Date Time Load Size
Prg ZVXR0303 09/29/2005 14:25:42 39936
Prg SAPMSSY0 05/01/2005 00:21:19 66560
Prg SAPMSSYD 06/05/2002 17:09:33 16384
Prg SAPFSYSCALLS 02/14/2002 14:22:47 6144
Prg RSDBRUNT 06/13/2004 00:43:20 226304
Typ RSSCR / / : m:15 5120
Prg RSDBSPBL 01/07/2003 18:47:02 59392
Prg SAPDB__S 02/14/2002 14:22:47 15360
Typ VARID 05/12/1997 16:51:30 4096
Prg %_CSYDB0 02/14/2002 14:22:46 28672
Prg RSDBSPVA 09/06/2005 22:54:22 112640
Prg SAPLSVAR 09/06/2005 22:57:28 625664
Typ VARIS 05/12/1997 15:27:21 2048
Typ RSVAMEMKEY 05/07/1997 13:07:49 2048
Prg RSDBSPMC 06/05/2002 17:09:26 66560
Typ DDSHDESCR 09/03/1997 03:05:16 3072
Typ SPPARAMS 05/07/1997 13:10:38 2048
Typ SPPARAMS 05/07/1997 13:10:38 2048
Typ RSSELINT 04/04/1995 16:12:37 2048
Prg SAPLICON 03/12/2004 06:57:52 23552
Prg %_CICON 02/14/2002 14:22:46 65536
Prg SAPLSABE 02/14/2002 14:22:47 11264
Prg SAPLSECU 05/23/2005 14:04:05 64512
Typ RSSUBINFO 10/14/1999 22:01:03 3072
Prg %_CRSDS 02/14/2002 14:22:46 8192
Typ RSDSEXPR 08/20/1998 10:57:18 2048
Prg SAPLDSYA 02/14/2002 14:22:47 39936
Prg SAPFSDS1 01/07/2003 18:32:17 47104
Typ TDCLD 11/02/1998 09:51:35 5120
Prg SAPLSDOD 04/30/2005 22:53:50 39936
Typ DOKIL 05/12/1997 16:46:17 3072
Prg SAPCNVE 02/14/2002 14:22:47 6144
Prg SAPLLANG 02/14/2002 14:22:47 8192
Typ T002 02/14/1998 10:24:58 2048
Typ RSEXFCODE 08/13/1997 12:52:57 1024
Prg SAPFSPOR 03/13/2004 19:20:44 12288
Prg SAPLOMCV 05/01/2005 00:14:10 16384
Prg CL_EXITHANDLER================CP 06/13/2004 00:40:58 26624
Prg SAPLSEXV 09/06/2005 22:55:26 107520
Prg CL_BADI_FLT_DATA_TRANS_AND_DB=CP 05/01/2005 00:21:35 33792
Typ SXS_ATTR 08/20/2001 12:23:27 4096
Typ V_EXT_ACT 11/09/2000 14:27:05 2048
Typ SXC_EXIT 11/09/2000 14:23:43 2048
Prg CL_EX_BADI_MATN1==============CP 05/01/2005 00:14:04 22528
Prg IF_EX_BADI_MATN1==============IP 06/13/2004 00:48:55 4096
Typ TMCNV 02/24/1999 03:33:25 3072
Prg SAPLSCNT 02/14/2002 14:22:47 24576
Typ DYCBOX 08/20/1998 11:16:53 2048
Prg SAPLSVSM 01/07/2003 18:35:45 22528
Prg SAPLSGUI 01/09/2003 17:15:12 31744
Prg SAPLSTTM 05/01/2005 00:24:04 75776
Prg SAPLSBDC 05/23/2005 14:05:19 38912
Prg CL_DATAPROVIDER===============CP 02/14/2002 14:22:46 40960
Prg %_CCNTL 02/14/2002 14:22:46 13312
Typ OBJ_RECORD 02/14/1998 08:30:43 2048
Prg SAPLSTUP 05/23/2005 14:03:46 65536
Prg SAPLCNDP 05/23/2005 14:05:47 167936
Prg SAPFGUICNTL 01/09/2003 17:18:52 20480
Prg SAPLOLEA 05/23/2005 14:03:56 79872
Prg SAPLSFES 09/06/2005 22:53:55 191488
Prg SAPLSPLUGIN 02/14/2002 14:22:48 6144
Typ ARFCRDATA 11/09/2000 14:04:16 6144
Prg SAPLGRFC 02/14/2002 14:22:47 13312
Typ SWCBCONT 11/15/2000 17:55:11 3072
Typ OLE_VERBS 04/04/1995 16:02:20 2048
Typ OLE_PA 04/04/1995 16:02:19 2048
Prg SAPSHDTV 03/12/2004 06:40:27 28672
Typ SSCRTEXTS 09/03/1997 03:12:33 3072
Typ SSCRFIELDS 05/13/1997 12:54:26 4096
Prg CL_GUI_PROPS_CONSUMER=========CP 01/07/2003 18:26:56 26624
Prg SAPLTHFB 09/06/2005 22:52:48 306176
Prg CL_DYNAMIC_GUI_EXTENSIONS=====CP 02/14/2002 14:22:46 33792
Prg CL_GUI_DATAMANAGER============CP 05/01/2005 00:20:36 70656
Prg CL_ABAP_CHAR_UTILITIES========CP 05/01/2005 00:14:49 11264
Prg RSDBSPVD 05/01/2005 00:15:44 73728
Typ RVARI 03/30/1998 09:40:50 4096
Typ RSVARIVDAT 04/04/1995 16:12:54 2048
Typ VBEP 01/27/2003 16:50:17 10240
Typ VBAP 09/15/2005 11:15:36 44032
Prg SAPLCEI0 09/22/2005 14:34:40 936960
Typ API_VALUE 02/20/1998 08:46:47 2048
Prg SAPLCUEV 06/07/2001 18:26:56 10240
Prg SAPLSUNI 06/13/2004 00:42:30 131072
Typ TFDIR 07/29/1998 19:49:08 3072
Prg %_CIBCO2 03/13/2004 14:32:13 12288
Typ IBINCOM 06/01/1999 11:56:27 3072
Typ IBINCONF 06/01/1999 11:56:27 2048
Typ IBSTCONF 06/01/1999 11:56:28 1024
Prg SAPLCUCB 05/23/2005 15:20:17 192512
Typ TCUIBSPECIAL 06/07/2001 17:50:37 1024
Prg %_CIBXX 03/13/2004 14:38:45 49152
Typ BAL_S_MSG 12/04/2000 13:04:01 6144
Prg CX_CBASE_ERROR================CP 01/27/2003 16:58:10 10240
Typ SCX_SRCPOS 11/09/2000 14:12:15 2048
Typ BAL_S_CONT 11/02/1998 09:43:07 2048
Typ BAL_S_PARM 12/04/2000 12:45:14 3072
Typ BAL_S_CLBK 11/02/1998 09:43:07 2048
Prg CX_STATIC_CHECK===============CP 02/14/2002 14:22:47 8192
Prg CX_ROOT=======================CP 02/14/2002 14:22:47 9216
Prg CL_CBASE======================CP 05/23/2005 15:19:44 87040
Typ T371G 04/29/1998 10:42:48 2048
Prg SAPLIBCO 03/13/2004 15:32:40 269312
Prg %_CIBCO 03/13/2004 14:38:45 11264
Prg SAPLIBXX 03/13/2004 14:38:46 11264
Prg SAPLIBIBF 03/13/2004 14:38:46 179200
Prg %_CIBIB 03/13/2004 14:38:45 18432
Prg SAPLIBINF 06/12/2004 22:20:22 415744
Prg %_CIBIN 03/13/2004 15:32:40 48128
Prg CL_IBASE_STRUC================CP 06/07/2001 19:59:10 106496
Prg %_CIBST 03/13/2004 14:38:45 37888
Prg CL_IBASE_STRUC_BUF============CP 06/07/2001 19:59:10 89088
Prg CL_IBASE_STRUC_STAT===========CP 06/07/2001 19:59:10 8192
Prg CL_IBASE_STRUC_BUF_IBSTREF====CP 06/07/2001 19:59:10 35840
Prg %_CIBCO1 03/13/2004 14:38:45 14336
Typ IBINVAL 09/18/2001 10:02:52 2048
Prg SAPLIBCU 03/13/2004 14:38:46 12288
Prg SAPLIBCUT 06/07/2001 18:27:19 12288
Typ T371B 05/14/1998 22:58:43 2048
Typ V_IBINR 03/13/2004 15:32:40 5120
Typ V_IBINR_CM 03/13/2004 15:32:40 5120
Prg CL_IBASE_SERVICE==============CP 06/07/2001 19:59:10 13312
Prg CL_IBASE_T371D_BUF============CP 06/07/2001 19:59:10 12288
Typ T371D 08/27/1999 18:19:44 2048
Prg CL_IBASE_R3_MATERIAL==========CP 05/23/2005 15:08:24 59392
Typ MARA 05/23/2005 15:08:18 22528
Typ MAKT 08/28/1997 08:52:19 2048
Typ ICON 01/03/1996 15:34:02 3072
Prg CL_ABAP_TYPEDESCR=============CP 05/01/2005 00:20:10 21504
Prg CL_ABAP_ELEMDESCR=============CP 05/01/2005 00:20:33 20480
Prg CL_ABAP_DATADESCR=============CP 03/12/2004 07:16:33 14336
Prg CL_ABAP_REFDESCR==============CP 03/12/2004 07:17:23 16384
Prg CL_ABAP_STRUCTDESCR===========CP 05/01/2005 00:20:33 20480
Prg CL_ABAP_COMPLEXDESCR==========CP 03/12/2004 07:16:33 13312
Prg CL_ABAP_TABLEDESCR============CP 03/12/2004 07:17:23 17408
Prg CL_ABAP_CLASSDESCR============CP 03/12/2004 07:17:23 23552
Prg CL_ABAP_OBJECTDESCR===========CP 03/12/2004 07:17:23 25600
Prg CL_ABAP_INTFDESCR=============CP 03/12/2004 07:16:33 19456
Prg CL_ABAP_SOFT_REFERENCE========CP 03/29/2001 16:42:12 7168
Prg CL_ABAP_REFERENCE=============CP 02/14/2002 14:22:46 6144
Prg IF_EX_CM_BADI_VERSION=========IP 01/07/2002 16:09:04 3072
Prg %_CABAP 01/07/2003 18:31:23 23552
Typ SXS_INTER 11/30/1998 15:55:16 2048
Prg CL_EX_CM_BADI_VERSION=========CP 05/01/2005 00:14:04 13312
Prg %_CSXRT 06/13/2004 00:40:55 11264
Prg CL_EXIT_MASTER================CP 06/13/2004 00:40:58 13312
Typ V_EXT_IMP 11/09/2000 14:27:05 2048
Typ V_EXT_IMP 11/09/2000 14:27:05 2048
Typ SXC_IMPSWH 11/09/2000 14:23:44 2048
Prg CL_IM_CM_BADI_VERSION_DEF=====CP 04/17/2002 11:01:00 6144
Prg SAPLASTAT_TRIG 02/14/2002 14:22:47 11264
Typ ASTAT_TYP2 11/10/1998 05:35:18 2048
Prg IF_CM_BASELINE================IP 05/23/2005 15:08:24 9216
Prg IF_IBASE_IBOF_TREE_OBJECT=====IP 05/23/2005 15:08:24 5120
Prg IF_IBASE_INSTALL==============IP 06/07/2001 20:08:54 4096
Prg IF_IBASE_MATERIAL=============IP 06/07/2001 20:08:54 3072
Prg IF_IBASE_OBJECT===============IP 06/07/2001 20:08:54 4096
Prg SAPLBOMA 02/14/2002 14:15:40 10240
Typ IONRA 03/12/2004 02:09:40 23552
Typ IBIBCOM 08/30/2001 17:56:57 4096
Typ IBIB 03/13/2004 14:32:13 5120
Prg CL_IBASE_STRUC_SERVICE========CP 06/07/2001 19:59:10 17408
Prg CL_CU_CBASE_ENQUEUE_CORE======CP 06/07/2001 19:58:59 11264
Prg CL_CU_CBASE_ENQUEUE===========CP 06/07/2001 19:58:59 16384
Typ T371F 06/01/1999 12:00:49 2048
Typ V_IBIN_SYVAL 03/13/2004 15:32:41 4096
Typ IBIN 09/18/2001 10:02:52 6144
Typ IBINOWN 02/01/2000 14:56:07 2048
Prg CL_IBASE_T371F_BUF============CP 06/07/2001 19:59:11 8192
Prg CL_IBASE_STRUC_FILT_02========CP 06/07/2001 19:59:10 11264
Prg CL_IBASE_STRUC_FILT===========CP 06/07/2001 19:59:10 10240
Typ IBST 09/18/2001 10:02:52 4096
Typ IBST 09/18/2001 10:02:52 4096
Typ IBSTREF 04/15/1998 00:20:43 2048
Typ IBSTREF 04/15/1998 00:20:43 2048
Prg IF_CBASE_E====================IP 06/07/2001 20:08:25 3072
Prg %_CCXTAB 02/14/2002 14:22:46 6144
Prg SAPLCUCQ 09/15/2005 11:15:38 79872
Typ CUCO 09/18/2001 10:02:34 18432
Typ CUCO_OBJ 09/18/2001 10:02:34 18432
Prg SAPLCLCA 09/06/2005 23:33:29 68608
Typ TCLA 03/13/2004 14:10:20 5120
Typ TCLAO 08/13/1997 13:57:22 4096
Prg SAPLCUOB 05/23/2005 14:31:35 31744
Typ INOB 09/03/1997 03:20:02 4096
Prg SAPLCLSE 05/23/2005 14:32:26 167936
Prg %_CCC01 05/01/2005 00:34:57 53248
Typ TABLEKEY 07/06/1998 21:01:06 2048
Typ KSSK 09/18/2001 10:02:58 3072
Prg SAPLCLEF -
SAP Ecc6.0 Installation error during ABAP Import Phase 20 of 24
While I am installing SAP ECC 6.0 with Original DVD. I am getting some Issues.
I had finished upto 4 stpes . and after that IMPORT ABAP, showing error in " Log files are written to C: Program files:sapinst......"
Please Retry , View Log & Stop.
I am clicking Retry again it will be come same issue. Please Let me know.
Log Files Name - "ABAP Processors of Instances SID\DVEMGS00"Still I am getting same problem in mine SAP ECC6.0 Installation.
In Abap Instance Phase 20 of 24. Error in ABAP Instance. I check the mmc.
Disp+work is in Gray Color. Remainiing Server Green Color. After Few minutes it will stopped in Work Process.
Still Going Installation for same Process.
Let me know. -
I have been trying to install a piece of software on 2 Windows 7 PCS called Rightfax...during installing I get the error below;
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
It then gives me an error log of ;
2015-04-23 14:43:03Z: Error: Unexpected problem occurred in task worker
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
at TaskWizard.TaskWorker.RunTasks()
at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
at TaskWizard.TaskWorker.RunTasks()
at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
at TaskWizard.TaskWorker.RunTasks()
at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
2015-04-23 14:43:03Z: Info: Page changed from 'WizardWorkerPage' to 'ResultPage' driven by result 'Next' and exception 'none'
2015-04-23 14:44:06Z: Info: Page changed from 'ResultPage' to 'none' driven by result 'Next' and exception 'none'
2015-04-23 14:44:06Z: Info: Work has not been completed; install state will not be saved.
2015-04-23 14:44:06Z: Info: Reboot status = NotRequired
2015-04-23 14:44:06Z: Info: Exitcode = 0
2015-04-23 14:44:06Z: Info: Logging ended.
I have installed this software succesfully on other machines previously.....Hi RyanWelsh78,
This forum is discussing about Visual Stuido Tools for Office developing, your issue is related with the installing Rightfax add-in which is a third party product. As the reply from Eugene, you could contact Rightfax add-in developers for help.
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Error code = 601; message="An Error happened during call of MaxDB Tool sdbi
I'm trying to install SAPNW7.0ABAPTrialSP12 and
I did these steps and was able to reinstall without any problems.
1. Run registry clean tool that came with the packaged software
\Additional_Tools\RegCleanTool
2. Then run Uninstall - System/Standalone Engine/Optional Standadlon ......
This is under the Software Life-Cycle Options-Uninstall
3. Check if there are any files located in
\Program Files\sapinst_instdir -
delete this directory
\Documents and SettinsThe specified item was not found.\Local settings\Temp
delete any references to SAP
The above steps helped me to reinstall the Trial software.
Make sure that the system for the install meet the following requirements:
u2022 Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
u2022 Hostname must not exceed 13 characters
u2022 NTFS-File system
u2022 Internet Explorer 5.5 or higher or Firefox 1.0 or higher
u2022 At least 1 GB RAM (2-4 GB recommended)
u2022 Pagefile size according to your RAM settings.
u2022 Intel Pentium III/1.1 GHz or higher (or compatible)
u2022 30 GB hard disk space temporary during installation - 24 GB permanent
The actual hard disk space required is more than 32GB. It is best to install the SAP directory on a separate drive if possible. Othewise you have to make sure that the drive where you install SAP has sufficient space for you system and the SAP install.
u2022 High-resolution monitor (1024x768 or higher, 256 colors)
u2022 Make sure that no other SAP system is installed on your computer
u2022 The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
u2022 If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
but it's happening the following error :
(Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file J:\sapdb\NSP\log.txt for details.
(Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Thanks,
NandoI'm trying to install SAPNW7.0ABAPTrialSP12 and
I did these steps and was able to reinstall without any problems.
1. Run registry clean tool that came with the packaged software
\Additional_Tools\RegCleanTool
2. Then run Uninstall - System/Standalone Engine/Optional Standadlon ......
This is under the Software Life-Cycle Options-Uninstall
3. Check if there are any files located in
\Program Files\sapinst_instdir -
delete this directory
\Documents and SettinsThe specified item was not found.\Local settings\Temp
delete any references to SAP
The above steps helped me to reinstall the Trial software.
Make sure that the system for the install meet the following requirements:
u2022 Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
u2022 Hostname must not exceed 13 characters
u2022 NTFS-File system
u2022 Internet Explorer 5.5 or higher or Firefox 1.0 or higher
u2022 At least 1 GB RAM (2-4 GB recommended)
u2022 Pagefile size according to your RAM settings.
u2022 Intel Pentium III/1.1 GHz or higher (or compatible)
u2022 30 GB hard disk space temporary during installation - 24 GB permanent
The actual hard disk space required is more than 32GB. It is best to install the SAP directory on a separate drive if possible. Othewise you have to make sure that the drive where you install SAP has sufficient space for you system and the SAP install.
u2022 High-resolution monitor (1024x768 or higher, 256 colors)
u2022 Make sure that no other SAP system is installed on your computer
u2022 The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
u2022 If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
but it's happening the following error :
(Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file J:\sapdb\NSP\log.txt for details.
(Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Thanks,
Nando -
Error "Error in ABAP statement when processing an internal table. table."
Hello,
I am facing the error when tried for GR from SRM portal for my shopping cart and for others created shopping cart. The error is
"Error in ABAP statement when processing an internal table. table."
I have the central receipient role. Couold any body assist me?
Thanks,
PijushHi Harish,
Execute the query in RSRT and check whether you have any short dump is in ST22. This would give a clear idea at what might have gone wrong.
Another thing is to check whether the code for the variable is fine in the user exit.
Hope this helps.
Bye
Dinesh -
photoshop cs6 error "could not use the type tool because the target channel is hidden. happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point. i really need to get thsi figured out. thank you.
You may have answered my question. I AM using the 64bit version of Illustrator CS6. I had no idea there were bugs in it that affected paths copied and pasted from Illustrator to Photoshop.
A bit more about what I'm trying to accomplish... I'm trying to follow Deke's tutorial (http://www.deke.com/content/dekes-techniques-018-creating-a-3d-pie-chart) which is already difficult since so much has changed between CS5.5 and 6, but then on top of that, I keep getting errors!
So I created the pie chart exactly as he shows and copied and pasted into Photoshop exactly as he does. Before submitting this post, though, I tried drawing just two very simple triangle shapes, copying them both and pasting them into Photoshop as a shape layer. The shapes weren't overlapping, but they were a part of the same shape layer just like the pie chart tutorial.
Thanks for your help. If there is anything else I should try before just giving up because of the 64bit bugs, please let me know. -
How to avoid time out error in abap program
How to avoid time out error in abap program
based on performance wise i want please helpTimeout occurs when a statement exceeds its time limit.To avoid this we need to tune the statements.
I can give give you few tips for tune a select stament.
1.The order of the feilds in the select statement should be same as the order of fields in the database table.
2.It is always advisible to use the key fields when you are using the where clause.
3. Sort the internal table while using the for all entreis statements.
4.Use index in where clause if necessary.
5.When you have a read statement user binary search but before this a sort statement should be there.
6. Check your program with the Tcode ST05 and check which statement takes much time based on that tune that. -
Handle errors when makeing doc.submitForm()
Hello,
I am trying to submit PDF form by method doc.submitForm, example:
doc.submitForm
cURL: "http://localhost/reader_test.php?name=" + name.rawValue,
cSubmitAs: "XML"
A) With this approach, is it possible to handle connection errors and display custom error message (and cancel the original one) ?
I have tried something like
try{ doc.submitForm(...); } catch(e) { //handle code }
but it seems to be run asynchronously.
B) Is it possible to add custom HTTP headers to the POST ?
I saw that FormCalc can do it in Post() funciton, but when using Post() function, the Reader displays Yello-bar security dialog, that made our previous SOAP-based solution too complicated for the end user.
Appreciate any help.
RadekSofar I have not found the way how to handle errors when using doc.submitForms(), but there may be following workaround (mey be?):
The server returns as a response to a submitForms() call a pdf content, which is displayed as a document in a new Reader's window. Is it possible to place some javascript into this new window, that would refer to parent window and send to it some message ? Or at least to detect at the "parent" window, that a "child" window was opened ?
So is there any relation between the newly opened document with the response from server and the original document, that initiated calling of doc.submitForms()?
Thanks. -
Inbound queue error"XI Error APPLICATION_ERROR.ABAP: Queue stopped"
Hi,
In SMQ2 ,we have received inbound queue error "XI Error APPLICATION_ERROR.ABAP: Queue stopped".When activate queue error is not going.So please advice.
Thanks,
PraveenHello Mr,
Have a look into SAP Notes: 824554, 906435, 783515, 910649, 706563.
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
To be more helpful, can you post here complete error log? -
Error message "ABAP/4 error during dynamic assign" on Contact Log creation.
Hi,
We are getting an error message "ABAP/4 error during dynamic assign beyond program bounds" displayed while creating contact log using transaction "BCT0".
Please suggest what can be the cause of the error message and how we can remove this.
Regards,
AnkurDear Andrea,
The problem should be caused by obsolete entry in table TFAWX.
Please use the following report for deleting this entry (test before in your TEST System) :
report ztfawx_delete.
tables tfawx.
select single * from tfawx where prog = 'SAPLBAS0'
and bldgr = '0110'
and mnum = 23
and bfeld = '$GENERAL'.
if sy-subrc = 0.
delete tfawx.
endif.
Buona Giornata
Mauro
Maybe you are looking for
-
How do I update my Macbook Air 10.6.8 to a newer version?
How do i update my Macbook Air 10.6.8 to a newer version
-
App store ID/password doesn't work
After updating my iPhone & iPad to OS7 my iPad can no longer sign in into the app store but my iPhone can. I have tried several times & it's a no go on the iPad.
-
I just changed over from a first-gen MBP to a new one, used Migration Assistant to bring everything over, which seems to have worked well. Except for FCP, which will not open. I was on 10.5.whatever and FCP 7, now of course I am on OS 10.6. Having br
-
"Unkown Server Error" - "try again later" message
continue to get"Unkown Server Error" - "try again later" message when I'm trying to download PP CC - please advise - thanks
-
Creating smaller project files
I have been working on a project for the last 2 months or so, and it contains about 500GB of video in one project, all on an external drive. I'm creating around 30 different edits within this project to create a series of web shows all filmed at one